- 30 Nov, 2023 1 commit
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-11-30 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 10 files changed, 66 insertions(+), 15 deletions(-). The main changes are: 1) Fix AF_UNIX splat from use after free in BPF sockmap, from John Fastabend. 2) Fix a syzkaller splat in netdevsim by properly handling offloaded programs (and not device-bound ones), from Stanislav Fomichev. 3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint, from Hou Tao. 4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink, from Daniel Borkmann. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Add af_unix test with both sockets in map bpf, sockmap: af_unix stream sockets need to hold ref for pair sock netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags() netdevsim: Don't accept device bound programs ==================== Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 29 Nov, 2023 5 commits
-
-
John Fastabend authored
This adds a test where both pairs of a af_unix paired socket are put into a BPF map. This ensures that when we tear down the af_unix pair we don't have any issues on sockmap side with ordering and reference counting. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com
-
John Fastabend authored
AF_UNIX stream sockets are a paired socket. So sending on one of the pairs will lookup the paired socket as part of the send operation. It is possible however to put just one of the pairs in a BPF map. This currently increments the refcnt on the sock in the sockmap to ensure it is not free'd by the stack before sockmap cleans up its state and stops any skbs being sent/recv'd to that socket. But we missed a case. If the peer socket is closed it will be free'd by the stack. However, the paired socket can still be referenced from BPF sockmap side because we hold a reference there. Then if we are sending traffic through BPF sockmap to that socket it will try to dereference the free'd pair in its send logic creating a use after free. And following splat: [59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0 [59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954 [...] [59.905468] Call Trace: [59.905787] <TASK> [59.906066] dump_stack_lvl+0x130/0x1d0 [59.908877] print_report+0x16f/0x740 [59.910629] kasan_report+0x118/0x160 [59.912576] sk_wake_async+0x31/0x1b0 [59.913554] sock_def_readable+0x156/0x2a0 [59.914060] unix_stream_sendmsg+0x3f9/0x12a0 [59.916398] sock_sendmsg+0x20e/0x250 [59.916854] skb_send_sock+0x236/0xac0 [59.920527] sk_psock_backlog+0x287/0xaa0 To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The primarily problem with keeping this logic in bpf_unix was: In the sock close() we could handle the deref by having a close handler. But, when we are destroying the psock through a map delete operation we wouldn't have gotten any signal thorugh the proto struct other than it being replaced. If we do the deref from the proto replace its too early because we need to deref the sk_pair after the backlog worker has been stopped. Given all this it seems best to just cache it at the end of the psock and eat 8B for the af_unix and vsock users. Notice dgram sockets are OK because they handle locking already. Fixes: 94531cfc ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by:
-
Jakub Kicinski authored
struct ynl_req_state carries reply-related info from generated code into generic YNL code. While we don't need reply info to execute a request without a reply, we still need to pass in the struct, because it's also where we get the pointer to struct ynl_sock from. Passing NULL results in crashes if kernel returns an error or an unexpected reply. Fixes: dc0956c9 ("tools: ynl-gen: move the response reading logic into YNL") Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
The default dump handler needs to clear ret before returning. Otherwise if the last interface returns an inconsequential error this error will propagate to user space. This may confuse user space (ethtool CLI seems to ignore it, but YNL doesn't). It will also terminate the dump early for mutli-skb dump, because netlink core treats EOPNOTSUPP as a real error. Fixes: 728480f1 ("ethtool: default handlers for GET requests") Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.orgSigned-off-by:
-
Yoshihiro Shimoda authored
Fix races between ravb_tx_timeout_work() and functions of net_device_ops and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that since ravb_close() is under the rtnl lock and calls cancel_work_sync(), ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock may happen in ravb_tx_timeout_work() like below: CPU0 CPU1 ravb_tx_timeout() schedule_work() ... __dev_close_many() // Under rtnl lock ravb_close() cancel_work_sync() // Waiting ravb_tx_timeout_work() rtnl_lock() // This is possible to cause a deadlock If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
- 28 Nov, 2023 13 commits
-
-
Heiner Kallweit authored
ndo_stop() is RTNL-protected by net core, and the worker function takes RTNL as well. Therefore we will deadlock when trying to execute a pending work synchronously. To fix this execute any pending work asynchronously. This will do no harm because netif_running() is false in ndo_stop(), and therefore the work function is effectively a no-op. However we have to ensure that no task is running or pending after rtl_remove_one(), therefore add a call to cancel_work_sync(). Fixes: abe5fc42 ("r8169: use RTNL to protect critical sections") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Heiner Kallweit authored
The original change results in a deadlock if jumbo mtu mode is used. Reason is that the phydev lock is held when rtl_reset_work() is called here, and rtl_jumbo_config() calls phy_start_aneg() which also tries to acquire the phydev lock. Fix this by calling rtl_reset_work() asynchronously. Fixes: 621735f5 ("r8169: fix rare issue with broken rx after link-down on RTL8125") Reported-by:
Ian Chen <free122448@hotmail.com> Tested-by:
-
Gustavo A. R. Silva authored
Previously, one-element and zero-length arrays were treated as true flexible arrays, even though they are actually "fake" flex arrays. The __randomize_layout would leave them untouched at the end of the struct, similarly to proper C99 flex-array members. However, this approach changed with commit 1ee60356 ("gcc-plugins: randstruct: Only warn about true flexible arrays"). Now, only C99 flexible-array members will remain untouched at the end of the struct, while one-element and zero-length arrays will be subject to randomization. Fix a `__randomize_layout` crash in `struct neighbour` by transforming zero-length array `primary_key` into a proper C99 flexible-array member. Fixes: 1ee60356 ("gcc-plugins: randstruct: Only warn about true flexible arrays") Closes: https://lore.kernel.org/linux-hardening/20231124102458.GB1503258@e124191.cambridge.arm.com/Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Tested-by:
Joey Gouly <joey.gouly@arm.com> Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@workSigned-off-by:
-
Subbaraya Sundeep authored
TC ingress policer rules depends on interface receive queue contexts since the bandwidth profiles are attached to RQ contexts. When an interface is brought down all the queue contexts are freed. This in turn frees bandwidth profiles in hardware causing ingress police rules non-functional after the interface is brought up. Fix this by applying all the ingress police rules config to hardware in otx2_open. Also allow adding ingress rules only when interface is running since no contexts exist for the interface when it is down. Fixes: 68fbff68 ("octeontx2-pf: Add police action for TC flower") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.comSigned-off-by:
-
Geetha sowjanya authored
When more than 64 VFs are enabled for a PF then mbox communication between VF and PF is not working as mbox work queueing for few VFs are skipped due to wrong calculation of VF numbers. Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
-
Furong Xu authored
Commit aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts by default") tries to disable MMC interrupts to avoid a storm of unhandled interrupts, but leaves the FPE(Frame Preemption) MMC interrupts enabled, FPE MMC interrupts can cause the same problem. Now we mask FPE TX and RX interrupts to disable all MMC interrupts. Fixes: aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts by default") Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by:
Furong Xu <0x1207@gmail.com> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.comSigned-off-by:
-
Elena Salomatkina authored
A loop in rvu_mbox_handler_nix_bandprof_free() contains a break if (idx == MAX_BANDPROF_PER_PFFUNC), but if idx may reach MAX_BANDPROF_PER_PFFUNC buffer '(*req->prof_idx)[layer]' overflow happens before that check. The patch moves the break to the beginning of the loop. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8e095b3 ("octeontx2-af: cn10k: Bandwidth profiles config support"). Signed-off-by:
Elena Salomatkina <elena.salomatkina.cmc@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Willem de Bruijn says: ==================== selftests/net: fix a few small compiler warnings Observed a clang warning when backporting cmsg_sender. Ran the same build against all the .c files under selftests/net. This is clang-14 with -Wall Which is what tools/testing/selftests/net/Makefile also enables. ==================== Link: https://lore.kernel.org/r/20231124171645.1011043-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Same init_rng() in both tests. The function reads /dev/urandom to initialize srand(). In case of failure, it falls back onto the entropy in the uninitialized variable. Not sure if this is on purpose. But failure reading urandom should be rare, so just fail hard. While at it, convert to getrandom(). Which man 4 random suggests is simpler and more robust. mptcp_inq.c:525:6: mptcp_connect.c:1131:6: error: variable 'foo' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Fixes: b5188056 ("selftests: mptcp: add inq test case") Cc: Florian Westphal <fw@strlen.de> Signed-off-by:Willem de Bruijn <willemb@google.com> ---- When input is randomized because this is expected to meaningfully explore edge cases, should we also add 1. logging the random seed to stdout and 2. adding a command line argument to replay from a specific seed I can do this in net-next, if authors find it useful in this case. Reviewed-by:
Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Remove an unused variable. diag_uid.c:151:24: error: unused variable 'udr' [-Werror,-Wunused-variable] Fixes: ac011361 ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Signed-off-by: -
Willem de Bruijn authored
Signedness of char is signed on x86_64, but unsigned on arm64. Fix the warning building cmsg_sender.c on signed platforms or forced with -fsigned-char: msg_sender.c:455:12: error: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion] buf[0] = ICMPV6_ECHO_REQUEST; constant ICMPV6_ECHO_REQUEST is 128. Link: https://lwn.net/Articles/911914 Fixes: de17e305 ("selftests: net: cmsg_sender: support icmp and raw sockets") Signed-off-by: -
Willem de Bruijn authored
Fix a small compiler warning. nr_process must be a signed long: it is assigned a signed long by strtol() and is compared against LONG_MIN and LONG_MAX. ipsec.c:2280:65: error: result of comparison of constant -9223372036854775808 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN)) Fixes: bc2652b7 ("selftest/net/xfrm: Add test for ipsec tunnel") Signed-off-by:Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Daniel Borkmann authored
The IFLA_NETKIT_PEER_INFO attribute can only be used during device creation, but not via changelink callback. Hence reject it there. Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
- 27 Nov, 2023 1 commit
-
-
Hou Tao authored
bpf_mem_cache_alloc_flags() may call __alloc() directly when there is no free object in free list, but it doesn't initialize the allocation hint for the returned pointer. It may lead to bad memory dereference when freeing the pointer, so fix it by initializing the allocation hint. Fixes: 822fb26b ("bpf: Add a hint to allocated objects.") Signed-off-by:
Hou Tao <houtao1@huawei.com> Acked-by:
Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20231111043821.2258513-1-houtao@huaweicloud.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
- 26 Nov, 2023 5 commits
-
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: various fixes The first patch fixes a memory corruption issue happening between the Tx and Tx confirmation of a packet by making the Tx alignment at 64bytes mandatory instead of optional as it was previously. The second patch fixes the Rx copybreak code path which recycled the initial data buffer before all processing was done on the packet. Changes in v2: - squashed patches #1 and #2 ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The blamed commit added support for Rx copybreak. This meant that for certain frame sizes, a new skb was allocated and the initial data buffer was recycled. Instead of waiting to recycle the Rx buffer only after all processing was done on it (like accessing the parse results or timestamp information), the code path just went ahead and re-used the buffer right away. This sometimes lead to corrupted HW and SW annotation areas. Fix this by delaying the moment when the buffer is recycled. Fixes: 50f82699 ("dpaa2-eth: add rx copybreak support") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Increase the needed headroom to account for a 64 byte alignment restriction which, with this patch, we make mandatory on the Tx path. The case in which the amount of headroom needed is not available is already handled by the driver which instead sends a S/G frame with the first buffer only holding the SW and HW annotation areas. Without this patch, we can empirically see data corruption happening between Tx and Tx confirmation which sometimes leads to the SW annotation area being overwritten. Since this is an old IP where the hardware team cannot help to understand the underlying behavior, we make the Tx alignment mandatory for all frames to avoid the crash on Tx conf. Also, remove the comment that suggested that this is just an optimization. This patch also sets the needed_headroom net device field to the usual value that the driver would need on the Tx path: - 64 bytes for the software annotation area - 64 bytes to account for a 64 byte aligned buffer address Fixes: 6e2387e8 ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver") Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/Signed-off-by:
-
Greg Ungerer authored
As of commit b92143d4 ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d4 ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by:
Greg Ungerer <gerg@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Greg Ungerer authored
As of commit de5c9bf4 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6350 switches fail to be probed: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces error creating PHYLINK: -22 mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Create a new dedicated phylink_get_caps for the 6351 family (which the 6350 is one of) to properly support their set of capabilities. According to chip.h the 6351 switch family includes the 6171, 6175, 6350 and 6351 switches, so update each of these to use the correct phylink_get_caps. Fixes: de5c9bf4 ("net: phylink: require supported_interfaces to be filled") Signed-off-by:
-
- 24 Nov, 2023 6 commits
-
-
Zhengchao Shao authored
When I perform the following test operations: 1.ip link add br0 type bridge 2.brctl addif br0 eth0 3.ip addr add 239.0.0.1/32 dev eth0 4.ip addr add 239.0.0.1/32 dev br0 5.ip addr add 224.0.0.1/32 dev br0 6.while ((1)) do ifconfig br0 up ifconfig br0 down done 7.send IGMPv2 query packets to port eth0 continuously. For example, ./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00 1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00" The preceding tests may trigger the refcnt uaf issue of the mc list. The stack is as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25) CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:refcount_warn_saturate (lib/refcount.c:25) RSP: 0018:ffffb68f00657910 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900 RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680 R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00 FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0 Call Trace: <TASK> igmp_heard_query (net/ipv4/igmp.c:1068) igmp_rcv (net/ipv4/igmp.c:1132) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) netif_receive_skb_internal (net/core/dev.c:5729) netif_receive_skb (net/core/dev.c:5788) br_handle_frame_finish (net/bridge/br_input.c:216) nf_hook_bridge_pre (net/bridge/br_input.c:294) __netif_receive_skb_core (net/core/dev.c:5423) __netif_receive_skb_list_core (net/core/dev.c:5606) __netif_receive_skb_list (net/core/dev.c:5674) netif_receive_skb_list_internal (net/core/dev.c:5764) napi_gro_receive (net/core/gro.c:609) e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6735) __do_softirq (kernel/softirq.c:554) run_ksoftirqd (kernel/softirq.c:913) smpboot_thread_fn (kernel/smpboot.c:164) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:250) </TASK> The root causes are as follows: Thread A Thread B ... netif_receive_skb br_dev_stop ... br_multicast_leave_snoopers ... __ip_mc_dec_group ... __igmp_group_dropped igmp_rcv igmp_stop_timer igmp_heard_query //ref = 1 ip_ma_put igmp_mod_timer refcount_dec_and_test igmp_start_timer //ref = 0 ... refcount_inc //ref increases from 0 When the device receives an IGMPv2 Query message, it starts the timer immediately, regardless of whether the device is running. If the device is down and has left the multicast group, it will cause the mc list refcount uaf issue. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Edward Adam Davis authored
Added initialization use_ack to mptcp_parse_option(). Reported-by: syzbot+b834a6b2decad004cfa1@syzkaller.appspotmail.com Signed-off-by:
Edward Adam Davis <eadavis@qq.com> Acked-by:
-
David S. Miller authored
Yoshihiro Shimoda says: ==================== net: rswitch: Fix issues in rswitch_start_xmit() This patch series is based on the latest net.git / main branch. Changes from v2: https://lore.kernel.org/all/20231122012556.3645840-1-yoshihiro.shimoda.uh@renesas.com/ - Keep reverse christmas tree of local variable declarations in patch 1/3. Changes from v1: https://lore.kernel.org/all/20231121055255.3627949-1-yoshihiro.shimoda.uh@renesas.com/ - Separate a patch because fixing 2 issues. - Add fixing wrong type of return value. - Use goto for improving code readability. ==================== Signed-off-by:
-
Yoshihiro Shimoda authored
Before returning the rswitch_start_xmit() in the error path, dev_kfree_skb_any() should be called. So, fix it. Fixes: 33f5d733 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by:
-
Yoshihiro Shimoda authored
This .ndo_start_xmit() function should return netdev_tx_t value, not -ENOMEM. So, fix it. Fixes: 33f5d733 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by:
-
Yoshihiro Shimoda authored
The type of ret in rswitch_start_xmit() should be netdev_tx_t. So, fix it. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
-
- 23 Nov, 2023 9 commits
-
-
Stanislav Fomichev authored
Commit 2b3486bc ("bpf: Introduce device-bound XDP programs") introduced device-bound programs by largely reusing existing offloading infrastructure. This changed the semantics of 'prog->aux->offload' a bit. Now, it's non-NULL for both offloaded and device-bound programs. Instead of looking at 'prog->aux->offload' let's call bpf_prog_is_offloaded which should be true iff the program is offloaded and not merely device-bound. Fixes: 2b3486bc ("bpf: Introduce device-bound XDP programs") Reported-by: syzbot+44c2416196b7c607f226@syzkaller.appspotmail.com Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ... -
Jakub Kicinski authored
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd16 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.orgSigned-off-by: -
Jakub Kicinski authored
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2 ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.orgSigned-off-by:
-
Alex Elder authored
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678e ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.orgSigned-off-by:
-
Jann Horn authored
syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). Fixes: df720d28 ("tls/sw: Use splice_eof() to flush") Cc: stable@vger.kernel.org Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com Signed-off-by:
Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.comSigned-off-by:
-
Samuel Holland authored
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
Samuel Holland <samuel.holland@sifive.com> Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.comSigned-off-by:
-
Arseniy Krasnov authored
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112 ("test/vsock: rework message bounds test") Signed-off-by:
Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by:
Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.comSigned-off-by:
-
Ivan Vecera authored
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc28 ("i40e: Add and delete cloud filter") Reviewed-by:
Ivan Vecera <ivecera@redhat.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.comSigned-off-by:
-
