- 09 Jan, 2006 40 commits
-
-
Lennert Buytenhek authored
Reverse the order of readreg/writereg and readword/writeword in the file, so that we can make readreg/writereg use readword/writeword. Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Cc: dmitry pervushin <dpervushin@ru.mvista.com> Cc: <dsaxena@plexity.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Lennert Buytenhek authored
Switch all occurences of inw/outw in the driver over to readword/writeword. Signed-off-by:
-
Lennert Buytenhek authored
readword() and writeword() take a 'struct net_device *' and deref its ->base_addr member. Make them take the base_addr directly instead, so that we can switch the other occurences of inw/outw in the file over to readword/writeword as well. Signed-off-by:
-
Kirill Korotaev authored
When oom_killer kills current there's no need to call schedule_timeout_interruptible() since task must die ASAP. Signed-Off-By:
Pavel Emelianov <xemul@sw.ru> Signed-Off-By:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
Christoph Lameter authored
Group page migration functions in mempolicy.c Add a forward declaration for migrate_page_add (like gather_stats()) and use our new found mobility to group all page migration related function around do_migrate_pages(). Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Christoph Lameter authored
Since the numa_maps functionality is now in mempolicy.c we no longer need to export get_vma_policy(). Signed-off-by:
-
Christoph Lameter authored
migrate_page_add cannot be called with a spinlock held (calls isolate_lru_page which calles schedule_on_each_cpu). Drop ptl lock in check_pte_range before calling migrate_page_add(). Signed-off-by:
-
Christoph Lameter authored
First discussed at http://marc.theaimsgroup.com/?t=113149255100001&r=1&w=2 - Use the check_range() in mempolicy.c to gather statistics. - Improve the numa_maps code in general and fix some comments. Signed-off-by:
-
Christoph Lameter authored
This was was first posted at http://marc.theaimsgroup.com/?l=linux-mm&m=113149240227584&w=2 (Part of this functionality is also contained in the direct migration pathset. The functionality here is more generic and independent of that patchset.) - Add internal flags MPOL_MF_INVERT to control check_range() behavior. - Replace the pagelist passed through by check_range by a general private pointer that may be used for other purposes. (The following patches will use that to merge numa_maps into mempolicy.c and to better group the page migration code in the policy layer) - Improve some comments. Signed-off-by:
-
Dave Jones authored
We seem to be hitting this assertion failure too often for it to be hardware bugs. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Tobias Klauser authored
Clean up a local variable with the same name as a variable in a larger block. Also move a variable into the block where it's actually used. Spotted by http://linuxicc.sourceforge.net/Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
-
Avishay Traeger authored
Fix set_page_count() macro to handle complex arguments. Signed-off-by:
Avishay Traeger <atraeger@cs.sunysb.edu> Signed-off-by:
-
Christoph Lameter authored
See http://marc.theaimsgroup.com/?l=linux-kernel&m=113167000201265&w=2 http://marc.theaimsgroup.com/?l=linux-mm&m=113167267527312&w=2 Make hugepages obey cpusets. Signed-off-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
-
Paul Jackson authored
Add a boolean "memory_migrate" to each cpuset, represented by a file containing "0" or "1" in each directory below /dev/cpuset. It defaults to false (file contains "0"). It can be set true by writing "1" to the file. If true, then anytime that a task is attached to the cpuset so marked, the pages of that task will be moved to that cpuset, preserving, to the extent practical, the cpuset-relative placement of the pages. Also anytime that a cpuset so marked has its memory placement changed (by writing to its "mems" file), the tasks in that cpuset will have their pages moved to the cpusets new nodes, preserving, to the extent practical, the cpuset-relative placement of the moved pages. Signed-off-by:
Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <christoph@lameter.com> Signed-off-by:
-
Christoph Lameter authored
Use -Exxx instead of numeric return codes and cleanup the code in migrate_pages() using -Exx error codes. Consolidate successful migration handling Signed-off-by:
-
Christoph Lameter authored
Extend the parameters of migrate_pages() to allow the caller control over the fate of successfully migrated or impossible to migrate pages. Swap migration and direct migration will have the same interface after this patch so that patches can be independently applied to the policy layer and the core migration code. Signed-off-by:
-
Christoph Lameter authored
Drop unused pages immediately If a page is encountered that is only referenced by the migration code then there is no reason to swap or migrate the page. Release the page by calling move_to_lru(). Signed-off-by:
-
Christoph Lameter authored
Add gfp_mask to add_to_swap add_to_swap does allocations with GFP_ATOMIC in order not to interfere with swapping. During migration we may have use add_to_swap extensively which may lead to out of memory errors. This patch makes add_to_swap take a parameter that specifies the gfp mask. The page migration code can then make add_to_swap use GFP_KERNEL. Signed-off-by:
Hirokazu Takahashi <taka@valinux.co.jp> Signed-off-by:
Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
Christoph Lameter authored
Move move_to_lru, putback_lru_pages and isolate_lru in section surrounded by CONFIG_MIGRATION saving some codesize for single processor kernels. Signed-off-by:
-
Christoph Lameter authored
sys_migrate_pages implementation using swap based page migration This is the original API proposed by Ray Bryant in his posts during the first half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org. The intent of sys_migrate is to migrate memory of a process. A process may have migrated to another node. Memory was allocated optimally for the prior context. sys_migrate_pages allows to shift the memory to the new node. sys_migrate_pages is also useful if the processes available memory nodes have changed through cpuset operations to manually move the processes memory. Paul Jackson is working on an automated mechanism that will allow an automatic migration if the cpuset of a process is changed. However, a user may decide to manually control the migration. This implementation is put into the policy layer since it uses concepts and functions that are also needed for mbind and friends. The patch also provides a do_migrate_pages function that may be useful for cpusets to automatically move memory. sys_migrate_pages does not modify policies in contrast to Ray's implementation. The current code here is based on the swap based page migration capability and thus is not able to preserve the physical layout relative to it containing nodeset (which may be a cpuset). When direct page migration becomes available then the implementation needs to be changed to do a isomorphic move of pages between different nodesets. The current implementation simply evicts all pages in source nodeset that are not in the target nodeset. Patch supports ia64, i386 and x86_64. Signed-off-by:
-
Christoph Lameter authored
Add page migration support via swap to the NUMA policy layer This patch adds page migration support to the NUMA policy layer. An additional flag MPOL_MF_MOVE is introduced for mbind. If MPOL_MF_MOVE is specified then pages that do not conform to the memory policy will be evicted from memory. When they get pages back in new pages will be allocated following the numa policy. Signed-off-by:
-
Christoph Lameter authored
Include page migration if the system is NUMA or having a memory model that allows distinct areas of memory (SPARSEMEM, DISCONTIGMEM). And: - Only include lru_add_drain_per_cpu if building for an SMP system. Signed-off-by:
-
Christoph Lameter authored
This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by:
Mike Kravetz <kravetz@us.ibm.com> Signed-off-by:
-
Christoph Lameter authored
Add PF_SWAPWRITE to control a processes permission to write to swap. - Use PF_SWAPWRITE in may_write_to_queue() instead of checking for kswapd and pdflush - Set PF_SWAPWRITE flag for kswapd and pdflush Signed-off-by:
-
Christoph Lameter authored
This is the start of the `swap migration' patch series. Swap migration allows the moving of the physical location of pages between nodes in a numa system while the process is running. This means that the virtual addresses that the process sees do not change. However, the system rearranges the physical location of those pages. The main intent of page migration patches here is to reduce the latency of memory access by moving pages near to the processor where the process accessing that memory is running. The patchset allows a process to manually relocate the node on which its pages are located through the MF_MOVE and MF_MOVE_ALL options while setting a new memory policy. The pages of process can also be relocated from another process using the sys_migrate_pages() function call. Requires CAP_SYS_ADMIN. The migrate_pages function call takes two sets of nodes and moves pages of a process that are located on the from nodes to the destination nodes. Manual migration is very useful if for example the scheduler has relocated a process to a processor on a distant node. A batch scheduler or an administrator can detect the situation and move the pages of the process nearer to the new processor. sys_migrate_pages() could be used on non-numa machines as well, to force all of a particualr process's pages out to swap, if someone thinks that's useful. Larger installations usually partition the system using cpusets into sections of nodes. Paul has equipped cpusets with the ability to move pages when a task is moved to another cpuset. This allows automatic control over locality of a process. If a task is moved to a new cpuset then also all its pages are moved with it so that the performance of the process does not sink dramatically (as is the case today). Swap migration works by simply evicting the page. The pages must be faulted back in. The pages are then typically reallocated by the system near the node where the process is executing. For swap migration the destination of the move is controlled by the allocation policy. Cpusets set the allocation policy before calling sys_migrate_pages() in order to move the pages as intended. No allocation policy changes are performed for sys_migrate_pages(). This means that the pages may not faulted in to the specified nodes if no allocation policy was set by other means. The pages will just end up near the node where the fault occurred. There's another patch series in the pipeline which implements "direct migration". The direct migration patchset extends the migration functionality to avoid going through swap. The destination node of the relation is controllable during the actual moving of pages. The crutch of using the allocation policy to relocate is not necessary and the pages are moved directly to the target. Its also faster since swap is not used. And sys_migrate_pages() can then move pages directly to the specified node. Implement functions to isolate pages from the LRU and put them back later. This patch: An earlier implementation was provided by Hirokazu Takahashi <taka@valinux.co.jp> and IWAMOTO Toshihiro <iwamoto@valinux.co.jp> for the memory hotplug project. From: Magnus This breaks out isolate_lru_page() and putpack_lru_page(). Needed for swap migration. Signed-off-by:
Magnus Damm <magnus.damm@gmail.com> Signed-off-by:
-
Christoph Lameter authored
swap migration's isolate_lru_page() currently uses an IPI to notify other processors that the lru caches need to be drained if the page cannot be found on the LRU. The IPI interrupt may interrupt a processor that is just processing lru requests and cause a race condition. This patch introduces a new function run_on_each_cpu() that uses the keventd() to run the LRU draining on each processor. Processors disable preemption when dealing the LRU caches (these are per processor) and thus executing LRU draining from another process is safe. Thanks to Lee Schermerhorn <lee.schermerhorn@hp.com> for finding this race condition. Signed-off-by:
-
Nick Piggin authored
Try to streamline free_pages_bulk by ensuring callers don't pass in a 'count' that exceeds the list size. Some cleanups: Rename __free_pages_bulk to __free_one_page. Put the page list manipulation from __free_pages_ok into free_one_page. Make __free_pages_ok static. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Nick Piggin authored
Use zone_pcp everywhere even though NUMA code "knows" the internal details of the zone. Stop other people trying to copy, and it looks nicer. Also, only print the pagesets of online cpus in zoneinfo. Signed-off-by:
-
Rohit Seth authored
As recently there has been lot of traffic on the right values for batch and high water marks for per_cpu_pagelists. This patch makes these two variables configurable through /proc interface. A new tunable /proc/sys/vm/percpu_pagelist_fraction is added. This entry controls the fraction of pages at most in each zone that are allocated for each per cpu page list. The min value for this is 8. It means that we don't allow more than 1/8th of pages in each zone to be allocated in any single per_cpu_pagelist. The batch value of each per cpu pagelist is also updated as a result. It is set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8) Signed-off-by:
Rohit Seth <rohit.seth@intel.com> Signed-off-by:
-
Andrew Morton authored
Add /proc/sys/vm/drop_caches. When written to, this will cause the kernel to discard as much pagecache and/or reclaimable slab objects as it can. THis operation requires root permissions. It won't drop dirty data, so the user should run `sync' first. Caveats: a) Holds inode_lock for exorbitant amounts of time. b) Needs to be taught about NUMA nodes: propagate these all the way through so the discarding can be controlled on a per-node basis. This is a debugging feature: useful for getting consistent results between filesystem benchmarks. We could possibly put it under a config option, but it's less than 300 bytes. Signed-off-by:
-
Christoph Lameter authored
For some reason there is an #ifdef CONFIG_NUMA within another #ifdef CONFIG_NUMA in the page allocator. Remove innermost #ifdef CONFIG_NUMA Signed-off-by:
-
Pekka Enberg authored
The slab allocator code is inconsistent in coding style and messy. For this patch, I ran Lindent for mm/slab.c and fixed up goofs by hand. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
This patch moves the ugly loop that determines the 'optimal' size (page order) of cache slabs from kmem_cache_create() to a separate function and cleans it up a bit. Thanks to Matthew Wilcox for the help with this patch. Signed-off-by:
Matthew Dobson <colpatch@us.ibm.com> Signed-off-by:
-
Pekka Enberg authored
This patch extracts slabinfo header printing to a separate function print_slabinfo_header() to make s_start() more readable. Signed-off-by:
-
Pekka Enberg authored
__alloc_percpu and alloc_percpu both take an 'align' argument which is completely ignored. snmp6_mib_init() in net/ipv6/af_inet6.c attempts to use it, but it will be ignored. Therefore, remove the 'align' argument and fixup the lone caller. Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Olaf Hering authored
Fix compilation with CONFIG_MEMORY_HOTPLUG=y and gcc41. Also remove unneeded declations, add a public function. drivers/base/memory.c:53: error: static declaration of 'register_memory_notifier' follows non-static declaration include/linux/memory.h:85: error: previous declaration of 'register_memory_notifier' was here drivers/base/memory.c:58: error: static declaration of 'unregister_memory_notifier' follows non-static declaration include/linux/memory.h:86: error: previous declaration of 'unregister_memory_notifier' was here drivers/base/memory.c:68: error: static declaration of 'register_memory' follows non-static declaration include/linux/memory.h:73: error: previous declaration of 'register_memory' was here Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Woody Suwalski authored
Cleanup for the ARM-only watchdog driver wdt977. This is probably the last update, since we want to merge with w83977f_wdt. Jose Goncalves has ported this driver to i386, so probably we can iron out configuration differences. Signed-off-by:
Woody Suwalski <woodys@xandros.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Marcelo Tosatti authored
Use no_llseek function. Signed-off-by:
Marcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: "Brian S. Julin" <bri@calyx.com> Acked-by:
Vojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by:
-
Andrew Morton authored
For BITS_PER_LONG Signed-off-by:
-
Andrew Morton authored
Hugh says: page_alloc_cpu_notify() specifically contains code to /* Add dead cpu's page_states to our own. */ which handles this more efficiently. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
