Revert commit 223c24a7 ("kbuild: Automatically remove stale
<linux/version.h> file").

It was more than 6 years ago. I do not expect anybody to start
git-bisect for such a big window.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

EXPORT_SYMBOL is unrelated to makefiles. No need to mention it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This switch statement does not list out all the cases. Since the
'default' covers all the rest, the 'DOTS' case is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

No one sets lexstate to ST_TABLE_*. It is is very old code, and I do
not know what was the plan at that time. Let's remove the dead code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is only used in yylex() in lex.l
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Paul Gortmaker reported a regression in the GCC version check. [1]
If you use GCC 4.8, the build breaks before showing the error message
"error Sorry, your version of GCC is too old - please use 4.9 or newer."

I do not want to apply his fix-up since it implies we would not be able
to remove any cc-option test. Anyway, I admit checking the GCC version
in <linux/compiler-gcc.h> is too late.

Almost at the same time, Linus also suggested to move the compiler
version error to Kconfig time. [2]

I unified the two similar scripts, gcc-version.sh and clang-version.sh
into cc-version.sh. The old scripts invoked the compiler multiple times
(3 times for gcc-version.sh, 4 times for clang-version.sh). I refactored
the code so the new one invokes the compiler just once, and also tried
my best to use shell-builtin commands where possible.

The new script runs faster.

  $ time ./scripts/clang-version.sh clang
  120000

  real    0m0.029s
  user    0m0.012s
  sys     0m0.021s

  $ time ./scripts/cc-version.sh clang
  Clang 120000

  real    0m0.009s
  user    0m0.006s
  sys     0m0.004s

cc-version.sh also shows an error message if the compiler is too old:

  $ make defconfig CC=clang-9
  *** Default configuration is based on 'x86_64_defconfig'
  ***
  *** Compiler is too old.
  ***   Your Clang version:    9.0.1
  ***   Minimum Clang version: 10.0.1
  ***
  scripts/Kconfig.include:46: Sorry, this compiler is not supported.
  make[1]: *** [scripts/kconfig/Makefile:81: defconfig] Error 1
  make: *** [Makefile:602: defconfig] Error 2

The new script takes care of ICC because we have <linux/compiler-intel.h>
although I am not sure if building the kernel with ICC is well-supported.

[1]: https://lore.kernel.org/r/20210110190807.134996-1-paul.gortmaker@windriver.com
[2]: https://lore.kernel.org/r/CAHk-=wh-+TMHPTFo1qs-MYyK7tZh-OQovA=pP3=e06aCVp6_kA@mail.gmail.com

Fixes: 87de84c9 ("kbuild: remove cc-option test of -Werror=date-time")
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit ccbef167 ("Kbuild, lto: add ld-version and ld-ifversion
macros") introduced scripts/ld-version.sh for GCC LTO.

At that time, this script handled 5 version fields because GCC LTO
needed the downstream binutils. (https://lkml.org/lkml/2014/4/8/272)

The code snippet from the submitted patch was as follows:

    # We need HJ Lu's Linux binutils because mainline binutils does not
    # support mixing assembler and LTO code in the same ld -r object.
    # XXX check if the gcc plugin ld is the expected one too
    # XXX some Fedora binutils should also support it. How to check for that?
    ifeq ($(call ld-ifversion,-ge,22710001,y),y)
        ...

However, GCC LTO was not merged into the mainline after all.
(https://lkml.org/lkml/2014/4/8/272)

So, the 4th and 5th fields were never used, and finally removed by
commit 0d61ed17 ("ld-version: Drop the 4th and 5th version
components").

Since then, the last 4-digits returned by this script is always zeros.

Remove the meaningless last 4-digits. This makes the version format
consistent with GCC_VERSION, CLANG_VERSION, LLD_VERSION.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The -gdwarf-4 flag is supported by GCC 4.5+, and also by Clang.

You can see it at https://godbolt.org/z/6ed1oW

  For gcc 4.5.3 pane,    line 37:    .value 0x4
  For clang 10.0.1 pane, line 117:   .short 4

Given Documentation/process/changes.rst stating GCC 4.9 is the minimal
version, this cc-option is unneeded.

Note
----

CONFIG_DEBUG_INFO_DWARF4 controls the DWARF version only for C files.

As you can see in the top Makefile, -gdwarf-4 is only passed to CFLAGS.

  ifdef CONFIG_DEBUG_INFO_DWARF4
  DEBUG_CFLAGS    += -gdwarf-4
  endif

This flag is used when compiling *.c files.

On the other hand, the assembler is always given -gdwarf-2.

  KBUILD_AFLAGS   += -Wa,-gdwarf-2

Hence, the debug info that comes from *.S files is always DWARF v2.
This is simply because GAS supported only -gdwarf-2 for a long time.

Recently, GAS gained the support for --gdwarf-[345] options. [1]
And, also we have Clang integrated assembler. So, the debug info
for *.S files might be improved in the future.

In my understanding, the current code is intentional, not a bug.

[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=31bf18645d98b4d3d7357353be840e320649a67dSigned-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>

By default, xz without parameters uses a dictionary size of 8 MB.
However, most modules are much smaller than that.
The xz manpage states that 'increasing dictionary size usually improves
compression ratio, but a dictionary bigger than the uncompressed file
is waste of memory'.
Use a dictionary size of 2 MB for module compression, resulting in
slightly higher compression speed while still maintaining a good
compression ratio.
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Randy reports the following warning when building ARCH=ia64 with
CONFIG_IA64_PALINFO=m:

../scripts/Makefile.build:68: 'arch/ia64/kernel/palinfo.ko' will not be built even though obj-m is specified.
../scripts/Makefile.build:69: You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.

This message is actually false-positive, and you can get palinfo.ko
correctly built. It is emitted in the archprepare stage, where Kbuild
descends into arch/ia64/kernel to generate include/generated/nr-irqs.h
instead of any kind of kernel objects.

arch/ia64/kernel/nr-irqs.c was introduced by commit 213060a4
("[IA64] pvops: paravirtualize NR_IRQS") to pre-calculate:

   NR_IRQS = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, FOO_NR_IRQS...)

Since commit d52eefb4 ("ia64/xen: Remove Xen support for ia64"), this
union contains just one field, making NR_IRQS and IA64_NATIVE_NR_IRQS
always match.

So, the following hard-coding now works:

  #define NR_IRQS                IA64_NATIVE_NR_IRQS

If you need to re-introduce NR_IRQS = max(...) gimmick in the future,
please try to implement it in asm-offsets.c instead of a separate file.
It will be possible because the header inclusion has been consolidated
to make asm-offsets.c independent of <asm/irqs.h>.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>

<asm/mca.h> includes too many unneeded headers.

This commit cuts off a lot of header includes.

What we need to include are:

 - <linux/percpu.h> for DECLARE_PER_CPU(u64, ia64_mca_pal_base)
 - <linux/threads.h> for NR_CPUS
 - <linux/types.h> for u8, u64, size_t, etc.
 - <asm/ptrace.h> for KERNEL_STACK_SIZE

The other header includes are actually unneeded.

<asm/mca.h> previously included 436 headers, and now it includes
only 138. I confirmed <asm/mca.h> is still self-contained.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>

Documentation/process/coding-style.rst says:

  Please don't use things like ``vps_t``.
  It's a **mistake** to use typedef for structures and pointers.

This commit converts as follows:

  struct pal_min_state_area_s  ->  struct pal_min_state_area
         pal_min_state_area_t  ->  struct pal_min_state_area

My main motivation for this is to slim down the include directives
of <asm/mca.h> in the next commit.

Currently, <asm/mca.h> is required to include <asm/pal.h> directly
or indirectly due to (pal_min_state_area_t *). Otherwise, it would
have no idea what pal_min_state_area_t is.

Replacing it with (struct pal_min_state_area *) will relax the header
dependency since it is enough to tell it is a pointer to a structure,
and to resolve the size of struct pal_min_state_area. It will make
<asm/mca.h> independent of <asm/pal.h>.

<asm/pal.h> typedef's a lot of structures, but it is trivial to
convert the others in the same way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>

Pull libnvdimm fixes from Dan Williams:
 "A fix for a crash scenario that has been present since the initial
  merge, a minor regression in sysfs attribute visibility, and a fix for
  some flexible array warnings.

  The bulk of this pull is an update to the libnvdimm unit test
  infrastructure to test non-ACPI platforms. Given there is zero
  regression risk for test updates, and the tests enable validation of
  bits headed towards the next merge window, I saw no reason to hold the
  new tests back. Santosh originally submitted this before the v5.11
  window opened.

  Summary:

   - Fix a crash when sysfs accesses race 'dimm' driver probe/remove.

   - Fix a regression in 'resource' attribute visibility necessary for
     mapping badblocks and other physical address interrogations.

   - Fix some flexible array warnings

   - Expand the unit test infrastructure for non-ACPI platforms"

* tag 'libnvdimm-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/dimm: Avoid race between probe and available_slots_show()
  ndtest: Add papr health related flags
  ndtest: Add nvdimm control functions
  ndtest: Add regions and mappings to the test buses
  ndtest: Add dimm attributes
  ndtest: Add dimms to the two buses
  ndtest: Add compatability string to treat it as PAPR family
  testing/nvdimm: Add test module for non-nfit platforms
  libnvdimm/namespace: Fix visibility of namespace resource attribute
  libnvdimm/pmem: Remove unused header
  ACPI: NFIT: Fix flexible_array.cocci warnings

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a 32 vs 64-bit padding issue in the new benchmark code (Barry
  Song)"

* tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: benchmark: use u8 for reserved field in uAPI structure

Pull irq fixes from Borislav Petkov:

 - Prevent device managed IRQ allocation helpers from returning IRQ 0

 - A fix for MSI activation of PCI endpoints with multiple MSIs

* tag 'irq_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Prevent [devm_]irq_alloc_desc from returning irq 0
  genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set

Pull syscall entry fixes from Borislav Petkov:

 - For syscall user dispatch, separate prctl operation from syscall
   redirection range specification before the API has been made official
   in 5.11.

 - Ensure tasks using the generic syscall code do trap after returning
   from a syscall when single-stepping is requested.

* tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Use different define for selector variable in SUD
  entry: Ensure trap after single-step on system call return

Pull scheduler fix from Borislav Petkov:
 "Revert an attempt to not spread IRQ threads on isolated CPUs which has
  a bunch of problems"

* tag 'sched_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "lib: Restrict cpumask_local_spread to houskeeping CPUs"

Pull timer fixes from Borislav Petkov:
 "Two more timers-related fixes for v5.11:

   - Use a freezable workqueue for RTC sync because the sync can happen
     at any time and trigger suspend assertion checks in the i2c
     subsystem.

   - Correct a previous RTC validation change to check only bit 6 in
     register D because some Intel machines use bits 0-5"

* tag 'timers_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Use freezable workqueue for RTC synchronization
  rtc: mc146818: Dont test for bit 0-5 in Register D

Pull x86 fixes from Borislav Petkov:
 "I hope this is the last batch of x86/urgent updates for this round:

   - Remove superfluous EFI PGD range checks which lead to those
     assertions failing with certain kernel configs and LLVM.

   - Disable setting breakpoints on facilities involved in #DB exception
     handling to avoid infinite loops.

   - Add extra serialization to non-serializing MSRs (IA32_TSC_DEADLINE
     and x2 APIC MSRs) to adhere to SDM's recommendation and avoid any
     theoretical issues.

   - Re-add the EPB MSR reading on turbostat so that it works on older
     kernels which don't have the corresponding EPB sysfs file.

   - Add Alder Lake to the list of CPUs which support split lock.

   - Fix %dr6 register handling in order to be able to set watchpoints
     with gdb again.

   - Disable CET instrumentation in the kernel so that gcc doesn't add
     ENDBR64 to kernel code and thus confuse tracing"

* tag 'x86_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Remove EFI PGD build time checks
  x86/debug: Prevent data breakpoints on cpu_dr7
  x86/debug: Prevent data breakpoints on __per_cpu_offset
  x86/apic: Add extra serialization for non-serializing MSRs
  tools/power/turbostat: Fallback to an MSR read for EPB
  x86/split_lock: Enable the split lock feature on another Alder Lake CPU
  x86/debug: Fix DR6 handling
  x86/build: Disable CET instrumentation in the kernel

Merge tag 'kbuild-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Use the 'python3' command to invoke python scripts because some
   distributions do not provide the 'python' command any more.

 - Clean-up and update documents

 - Use pkg-config to search libcrypto

 - Fix duplicated debug flags

 - Ignore some more stubs in scripts/kallsyms.c

* tag 'kbuild-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kallsyms: fix nonconverging kallsyms table with lld
  kbuild: fix duplicated flags in DEBUG_CFLAGS
  scripts/clang-tools: switch explicitly to Python 3
  kbuild: remove PYTHON variable
  Documentation/llvm: Add a section about supported architectures
  Revert "checkpatch: add check for keyword 'boolean' in Kconfig definitions"
  scripts: use pkg-config to locate libcrypto
  kconfig: mconf: fix HOSTCC call
  doc: gcc-plugins: update gcc-plugins.rst
  kbuild: simplify GCC_PLUGINS enablement in dummy-tools/gcc
  Documentation/Kbuild: Remove references to gcc-plugin.sh
  scripts: switch explicitly to Python 3

Pull cifs fixes from Steve French:
 "Three small smb3 fixes for stable"

* tag '5.11-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: report error instead of invalid when revalidating a dentry fails
  smb3: fix crediting for compounding when only one request in flight
  smb3: Fix out-of-bounds bug in SMB2_negotiate()

Pull RISC-V fixes from Palmer Dabbelt:
 "A handful of fixes for this week:

   - A fix to avoid evalating the VA twice in virt_addr_valid, which
     fixes some WARNs under DEBUG_VIRTUAL.

   - Two fixes related to STRICT_KERNEL_RWX: one that fixes some
     permissions when strict is disabled, and one to fix some alignment
     issues when strict is enabled.

   - A fix to disallow the selection of MAXPHYSMEM_2GB on RV32, which
     isn't valid any more but may still show up in some oldconfigs.

  We still have the HiFive Unleashed ethernet phy reset regression, so
  there will likely be something coming next week"

* tag 'riscv-for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Define MAXPHYSMEM_1GB only for RV32
  riscv: Align on L1_CACHE_BYTES when STRICT_KERNEL_RWX
  RISC-V: Fix .init section permission update
  riscv: virt_addr_valid must check the address belongs to linear mapping

Pull powerpc fixes from Michael Ellerman:

 - A fix for a change we made to __kernel_sigtramp_rt64() which confused
   glibc's backtrace logic, and also changed the semantics of that
   symbol, which was arguably an ABI break.

 - A fix for a stack overwrite in our VSX instruction emulation.

 - A couple of fixes for the Makefile logic in the new C VDSO.

Thanks to Masahiro Yamada, Naveen N.  Rao, Raoni Fassina Firmino, and
Ravi Bangoria.

* tag 'powerpc-5.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics
  powerpc/vdso64: remove meaningless vgettimeofday.o build rule
  powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o
  powerpc/sstep: Fix array out of bound warning

Pull ARM fixes from Russell King:

 - Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
   accessors that affects GCC >= 4.9.2

 - Fix misplaced tegra_uart_config in decompressor

 - Ensure signal page contents are initialised

 - Fix kexec oops

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: kexec: fix oops after TLB are invalidated
  ARM: ensure the signal page contains defined contents
  ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
  ARM: footbridge: fix dc21285 PCI configuration accessors

Pull USB fixes from Greg KH:
 "Here are some small, last-minute, USB driver fixes for 5.11-rc7

  They all resolve issues reported, or are a few new device ids for some
  drivers. They include:

   - new device ids for some usb-serial drivers

   - xhci fixes for a variety of reported problems

   - dwc3 driver bugfixes

   - dwc2 driver bugfixes

   - usblp driver bugfix

   - thunderbolt bugfix

   - few other tiny fixes

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc2: Fix endpoint direction check in ep_from_windex
  usb: dwc3: fix clock issue during resume in OTG mode
  xhci: fix bounce buffer usage for non-sg list case
  usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720
  usb: xhci-mtk: break loop when find the endpoint to drop
  usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints
  usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()
  USB: gadget: legacy: fix an error code in eth_bind()
  thunderbolt: Fix possible NULL pointer dereference in tb_acpi_add_link()
  USB: serial: option: Adding support for Cinterion MV31
  usb: xhci-mtk: fix unreleased bandwidth data
  usb: gadget: aspeed: add missing of_node_put
  USB: usblp: don't call usb_set_interface if there's a single alt
  USB: serial: cp210x: add pid/vid for WSDA-200-USB
  USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000

Pull input fixes from Dmitry Torokhov:
 "Nothing terribly interesting, just a few fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - sync supported devices with fork on GitHub
  Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table
  Input: goodix - add support for Goodix GT9286 chip
  dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC
  dt-bindings: input: adc-keys: clarify description
  Input: ili210x - implement pressure reporting for ILI251x
  Input: i8042 - unbreak Pegatron C15B
  Input: st1232 - wait until device is ready before reading resolution
  Input: st1232 - do not read more bytes than needed
  Input: st1232 - fix off-by-one error in resolution handling

Pull SCSI fix from James Bottomley:
 "One fix in drivers (lpfc) that stops an oops on resource exhaustion"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix EEH encountering oops with NVMe traffic

Pull block fixes from Jens Axboe:
 "A few small regression fixes:

   - NVMe pull request from Christoph:
       - more quirks for buggy devices (Thorsten Leemhuis, Claus Stovgaard)
       - update the email address for Keith (Keith Busch)
       - fix an out of bounds access in nvmet-tcp (Sagi Grimberg)

   - Regression fix for BFQ shallow depth calculations introduced in
     this merge window (Lin)"

* tag 'block-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
  nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUs
  bfq-iosched: Revert "bfq: Fix computation of shallow depth"
  update the email address for Keith Bush
  nvme-pci: ignore the subsysem NQN on Phison E16
  nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs

Pull io_uring fixes from Jens Axboe:
 "Two small fixes that should go into 5.11:

   - task_work resource drop fix (Pavel)

   - identity COW fix (Xiaoguang)"

* tag 'io_uring-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
  io_uring: drop mm/files between task_work_submit
  io_uring: don't modify identity's files uncess identity is cowed

With CONFIG_X86_5LEVEL, CONFIG_UBSAN and CONFIG_UBSAN_UNSIGNED_OVERFLOW
enabled, clang fails the build with

  x86_64-linux-ld: arch/x86/platform/efi/efi_64.o: in function `efi_sync_low_kernel_mappings':
  efi_64.c:(.text+0x22c): undefined reference to `__compiletime_assert_354'

which happens due to -fsanitize=unsigned-integer-overflow being enabled:

  -fsanitize=unsigned-integer-overflow: Unsigned integer overflow, where
  the result of an unsigned integer computation cannot be represented
  in its type. Unlike signed integer overflow, this is not undefined
  behavior, but it is often unintentional. This sanitizer does not check
  for lossy implicit conversions performed before such a computation
  (see -fsanitize=implicit-conversion).

and that fires when the (intentional) EFI_VA_START/END defines overflow
an unsigned long, leading to the assertion expressions not getting
optimized away (on GCC they do)...

However, those checks are superfluous: the runtime services mapping
code already makes sure the ranges don't overshoot EFI_VA_END as the
EFI mapping range is hardcoded. On each runtime services call, it is
switched to the EFI-specific PGD and even if mappings manage to escape
that last PGD, this won't remain unnoticed for long.

So rip them out.

See https://github.com/ClangBuiltLinux/linux/issues/256 for more info.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: http://lkml.kernel.org/r/20210107223424.4135538-1-arnd@kernel.org

Michael Kerrisk suggested that, from an API perspective, it is a bad
idea to share the PR_SYS_DISPATCH_ defines between the prctl operation
and the selector variable.

Therefore, define two new constants to be used by SUD's selector variable
and update the corresponding documentation and test cases.

While this changes the API syscall user dispatch has never been part of a
Linux release, it will show up for the first time in 5.11.
Suggested-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com

Commit 29915524 ("entry: Drop usage of TIF flags in the generic syscall
code") introduced a bug on architectures using the generic syscall entry
code, in which processes stopped by PTRACE_SYSCALL do not trap on syscall
return after receiving a TIF_SINGLESTEP.

The reason is that the meaning of TIF_SINGLESTEP flag is overloaded to
cause the trap after a system call is executed, but since the above commit,
the syscall call handler only checks for the SYSCALL_WORK flags on the exit
work.

Split the meaning of TIF_SINGLESTEP such that it only means single-step
mode, and create a new type of SYSCALL_WORK to request a trap immediately
after a syscall in single-step mode.  In the current implementation, the
SYSCALL_WORK flag shadows the TIF_SINGLESTEP flag for simplicity.

Update x86 to flip this bit when a tracer enables single stepping.

Fixes: 29915524 ("entry: Drop usage of TIF flags in the generic syscall code")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Link: https://lore.kernel.org/r/87h7mtc9pr.fsf_-_@collabora.com

This reverts commit 1abdfe70.

This change is broken and not solving any problem it claims to solve.

Robin reported that cpumask_local_spread() now returns any cpu out of
cpu_possible_mask in case that NOHZ_FULL is disabled (runtime or compile
time). It can also return any offline or not-present CPU in the
housekeeping mask. Before that it was returning a CPU out of
online_cpu_mask.

While the function is racy against CPU hotplug if the caller does not
protect against it, the actual use cases are not caring much about it as
they use it mostly as hint for:

 - the user space affinity hint which is unused by the kernel
 - memory node selection which is just suboptimal
 - network queue affinity which might fail but is handled gracefully

But the occasional fail vs. hotplug is very different from returning
anything from possible_cpu_mask which can have a large amount of offline
CPUs obviously.

The changelog of the commit claims:

 "The current implementation of cpumask_local_spread() does not respect
  the isolated CPUs, i.e., even if a CPU has been isolated for Real-Time
  task, it will return it to the caller for pinning of its IRQ
  threads. Having these unwanted IRQ threads on an isolated CPU adds up
  to a latency overhead."

The only correct part of this changelog is:

 "The current implementation of cpumask_local_spread() does not respect
  the isolated CPUs."

Everything else is just disjunct from reality.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: abelits@marvell.com
Cc: davem@davemloft.net
Link: https://lore.kernel.org/r/87y2g26tnt.fsf@nanos.tec.linutronix.de

Merge misc fixes from Andrew Morton:
 "18 patches.

  Subsystems affected by this patch series: mm (hugetlb, compaction,
  vmalloc, shmem, memblock, pagecache, kasan, and hugetlb), mailmap,
  gcov, ubsan, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS/.mailmap: use my @kernel.org address
  mm: hugetlb: fix missing put_page in gather_surplus_pages()
  ubsan: implement __ubsan_handle_alignment_assumption
  kasan: make addr_has_metadata() return true for valid addresses
  kasan: add explicit preconditions to kasan_report()
  mm/filemap: add missing mem_cgroup_uncharge() to __add_to_page_cache_locked()
  mailmap: add entries for Manivannan Sadhasivam
  mailmap: fix name/email for Viresh Kumar
  memblock: do not start bottom-up allocations with kernel_end
  mm: thp: fix MADV_REMOVE deadlock on shmem THP
  init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcov
  mm/vmalloc: separate put pages and flush VM flags
  mm, compaction: move high_pfn to the for loop scope
  mm: migrate: do not migrate HugeTLB page whose refcount is one
  mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active
  mm: hugetlb: fix a race between isolating and freeing page
  mm: hugetlb: fix a race between freeing and dissolving the page
  mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page

Since commit a85a6c86 ("driver core: platform: Clarify that IRQ 0
is invalid"), having a linux-irq with number 0 will trigger a WARN()
when calling platform_get_irq*() to retrieve that linux-irq.

Since [devm_]irq_alloc_desc allocs a single irq and since irq 0 is not used
on some systems, it can return 0, triggering that WARN(). This happens
e.g. on Intel Bay Trail and Cherry Trail devices using the LPE audio engine
for HDMI audio:

 0 is an invalid IRQ number
 WARNING: CPU: 3 PID: 472 at drivers/base/platform.c:238 platform_get_irq_optional+0x108/0x180
 Modules linked in: snd_hdmi_lpe_audio(+) ...

 Call Trace:
  platform_get_irq+0x17/0x30
  hdmi_lpe_audio_probe+0x4a/0x6c0 [snd_hdmi_lpe_audio]

 ---[ end trace ceece38854223a0b ]---

Change the 'from' parameter passed to __[devm_]irq_alloc_descs() by the
[devm_]irq_alloc_desc macros from 0 to 1, so that these macros will no
longer return 0.

Fixes: a85a6c86 ("driver core: platform: Clarify that IRQ 0 is invalid")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201221185647.226146-1-hdegoede@redhat.com

Assuming
- //HOST/a is mounted on /mnt
- //HOST/b is mounted on /mnt/b

On a slow connection, running 'df' and killing it while it's
processing /mnt/b can make cifs_get_inode_info() returns -ERESTARTSYS.

This triggers the following chain of events:
=> the dentry revalidation fail
=> dentry is put and released
=> superblock associated with the dentry is put
=> /mnt/b is unmounted

This patch makes cifs_d_revalidate() return the error instead of 0
(invalid) when cifs_revalidate_dentry() fails, except for ENOENT (file
deleted) and ESTALE (file recreated).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Suggested-by: Shyam Prasad N <nspmangalore@gmail.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

local_db_save() is called at the start of exc_debug_kernel(), reads DR7 and
disables breakpoints to prevent recursion.

When running in a guest (X86_FEATURE_HYPERVISOR), local_db_save() reads the
per-cpu variable cpu_dr7 to check whether a breakpoint is active or not
before it accesses DR7.

A data breakpoint on cpu_dr7 therefore results in infinite #DB recursion.

Disallow data breakpoints on cpu_dr7 to prevent that.

Fixes: 84b6a349("x86/entry: Optimize local_db_save() for virt")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210204152708.21308-2-jiangshanlai@gmail.com

When FSGSBASE is enabled, paranoid_entry() fetches the per-CPU GSBASE value
via __per_cpu_offset or pcpu_unit_offsets.

When a data breakpoint is set on __per_cpu_offset[cpu] (read-write
operation), the specific CPU will be stuck in an infinite #DB loop.

RCU will try to send an NMI to the specific CPU, but it is not working
either since NMI also relies on paranoid_entry(). Which means it's
undebuggable.

Fixes: eaad9812("x86/entry/64: Introduce the FIND_PERCPU_BASE macro")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210204152708.21308-1-jiangshanlai@gmail.com

Use my @kernel.org for all points of contact so that I am always
accessible.

Link: https://lkml.kernel.org/r/20210126212730.2097108-1-nathan@kernel.orgSigned-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>