- 05 Sep, 2014 25 commits
-
-
Russell King authored
commit 2d31ca3a upstream. Regular randconfig nightly testing has detected problems with omapdrm. omapdrm fails to build when the kernel is built to support 64-bit DMA addresses and/or 64-bit physical addresses due to an assumption about the width of these types. Use %pad to print DMA addresses, rather than %x or %Zx (which is even more wrong than %x). Avoid passing a uint32_t pointer into a function which expects dma_addr_t pointer. drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1 drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr': drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe': drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init': drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append': drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror] make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1 make[5]: Target `__build' not remade because of errors. make[4]: *** [drivers/gpu/drm/omapdrm] Error 2 Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Vial authored
commit 9b5f7428 upstream. According to the comment “restore_es3: applies to 34xx >= ES3.0" in "arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used if the revision of an OMAP34xx is ES3.1.2. Signed-off-by:
Jeremy Vial <jvial@adeneo-embedded.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Baruch Siach authored
commit bc994c77 upstream. Commit cb8db5d4 (UAPI: (Scripted) Disintegrate arch/arm/include/asm) moved these syscall comments out of their context into the UAPI headers. Fix this. Fixes: cb8db5d4 ("UAPI: (Scripted) Disintegrate arch/arm/include/asm") Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Suman Anna authored
commit 44e6ab1b upstream. The mailbox DT node for AM4372 is enabled and is corrected to remove some properties that have crept in by mistake. Fixes: 9e3269b8 (ARM: dts: AM4372: Add L2, EDMA, mailbox, MMC and SHAM nodes) Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
-
Daniel Bristot de Oliveira authored
commit d8d28c8f upstream. The scheduler uses policy == -1 to preserve the current policy state to implement sched_setparam(). But, as (int) -1 is equals to 0xffffffff, it's matching the if (policy & SCHED_RESET_ON_FORK) on _sched_setscheduler(). This match changes the policy value to an invalid value, breaking the sched_setparam() syscall. This patch checks policy == -1 before check the SCHED_RESET_ON_FORK flag. The following program shows the bug: int main(void) { struct sched_param param = { .sched_priority = 5, }; sched_setscheduler(0, SCHED_FIFO, ¶m); param.sched_priority = 1; sched_setparam(0, ¶m); param.sched_priority = 0; sched_getparam(0, ¶m); if (param.sched_priority != 1) printf("failed priority setting (found %d instead of 1)\n", param.sched_priority); else printf("priority setting fine\n"); } Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Fixes: 7479f3c9 "sched: Move SCHED_RESET_ON_FORK into attr::sched_flags" Link: http://lkml.kernel.org/r/9ebe0566a08dbbb3999759d3f20d6004bb2dbcfa.1406079891.git.bristot@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alexander Usyskin authored
commit 22b987a3 upstream. Link must be reset in case the fw doesn't respond to client disconnect request. We did charge the timer only in irq path from mei_cl_irq_close and not in mei_cl_disconnect Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit f3ee07d8 upstream. ALC269 & co have many vendor-specific setups with COEF verbs. However, some verbs seem specific to some codec versions and they result in the codec stalling. Typically, such a case can be avoided by checking the return value from reading a COEF. If the return value is -1, it implies that the COEF is invalid, thus it shouldn't be written. This patch adds the invalid COEF checks in appropriate places accessing ALC269 and its variants. The patch actually fixes the resume problem on Acer AO725 laptop. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181Tested-by:
Francesco Muzio <muziofg@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit f475371a upstream. On some HP laptops, the mute led is controlled by codec gpio. When some machine resume from s3/s4, the codec gpio data will be cleared to 0 by BIOS: Before suspend: IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0 After resume: IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0 To skip the AFG node to enter D3 can't fix this problem. A workaround is to restore the gpio data when the system resume back from s3/s4. It is safe even on the machines without this problem. BugLink: https://bugs.launchpad.net/bugs/1358116Tested-by:
Franz Hsieh <franz.hsieh@canonical.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
David Henningsson authored
commit 42304474 upstream. This makes the mute LED work on a HP 15 touchsmart machine. BugLink: https://bugs.launchpad.net/bugs/1334950Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Clemens Ladisch authored
commit 53da5ebf upstream. The BOSS ME-25 turns out not to have any useful descriptors in its MIDI interface, so its needs a quirk entry after all. Reported-and-tested-by:
Kees van Veen <kees.vanveen@gmail.com> Fixes: 8e5ced83 ("ALSA: usb-audio: remove superfluous Roland quirks") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Iwai authored
commit e24aa0a4 upstream. CA0132 driver tries to reload the firmware at resume. Usually this works since the firmware loader core caches the firmware contents by itself. However, if the driver failed to load the firmwares (e.g. missing files), reloading the firmware at resume goes through the actual file loading code path, and triggers a kernel WARNING like: WARNING: CPU: 10 PID:11371 at drivers/base/firmware_class.c:1105 _request_firmware+0x9ab/0x9d0() For avoiding this situation, this patch makes CA0132 skipping the f/w loading at resume when it failed at probe time. Reported-and-tested-by:
Janek Kozicki <cosurgi@gmail.com> Signed-off-by:
-
Clemens Ladisch authored
commit f42bb222 upstream. Just add the PCI ID for the STX II. It appears to work the same as the STX, except for the addition of the not-yet-supported daughterboard. Tested-by:
Mario <fugazzi99@gmail.com> Tested-by:
corubba <corubba@gmx.de> Signed-off-by:
-
Paul S McSpadden authored
commit 542baf94 upstream. Original patch fixed the original problem, but the sound was far too low for most users. This patch references a compare matrix to allow the volume levels to act normally. I personally tested this patch myself, and volume levels returned to normal. Please see this discussion for more details: https://bugzilla.kernel.org/show_bug.cgi?id=65251Signed-off-by:
Paul S McSpadden <fisch602@gmail.com> Signed-off-by:
-
Hui Wang authored
commit 7440850c upstream. ON the machine, two pin complex (0xb and 0xe) are both routed to the same external right-side mic jack, this makes the jack can't work. To fix this problem, set the 0xe to "not connected". BugLink: https://bugs.launchpad.net/bugs/1350148Tested-by:
-
Pratyush Anand authored
commit a40178b2 upstream. Problem Summary: Problem has been observed generally with PM states where VBUS goes off during suspend. There are some SS USB devices which take longer time for link training compared to many others. Such devices fail to reconnect with same old address which was associated with it before suspend. When system resumes, at some point of time (dpm_run_callback-> usb_dev_resume->usb_resume->usb_resume_both->usb_resume_device-> usb_port_resume) SW reads hub status. If device is present, then it finishes port resume and re-enumerates device with same address. If device is not present then, SW thinks that device was removed during suspend and therefore does logical disconnection and removes all the resource allocated for this device. Now, if I put sufficient delay just before root hub status read in usb_resume_device then, SW sees always that device is present. In normal course(without any delay) SW sees that no device is present and then SW removes all resource associated with the device at this port. In the latter case, after sometime, device says that hey I am here, now host enumerates it, but with new address. Problem had been reproduced when I connect verbatim USB3.0 hard disc with my STiH407 XHCI host running with 3.10 kernel. I see that similar problem has been reported here. https://bugzilla.kernel.org/show_bug.cgi?id=53211 Reading above it seems that bug was not in 3.6.6 and was present in 3.8 and again it was not present for some in 3.12.6, while it was present for few others. I tested with 3.13-FC19 running at i686 desktop, problem was still there. However, I was failed to reproduce it with 3.16-RC4 running at same i686 machine. I would say it is just a random observation. Problem for few devices is always there, as I am unable to find a proper fix for the issue. So, now question is what should be the amount of delay so that host is always able to recognize suspended device after resume. XHCI specs 4.19.4 says that when Link training is successful, port sets CSC bit to 1. So if SW reads port status before successful link training, then it will not find device to be present. USB Analyzer log with such buggy devices show that in some cases device switch on the RX termination after long delay of host enabling the VBUS. In few other cases it has been seen that device fails to negotiate link training in first attempt. It has been reported till now that few devices take as long as 2000 ms to train the link after host enabling its VBUS and RX termination. This patch implements a 2000 ms timeout for CSC bit to set ie for link training. If in a case link trains before timeout, loop will exit earlier. This patch implements above delay, but only for SS device and when persist is enabled. So, for the good device overhead is almost none. While for the bad devices penalty could be the time which it take for link training. But, If a device was connected before suspend, and was removed while system was asleep, then the penalty would be the timeout ie 2000 ms. Results: Verbatim USB SS hard disk connected with STiH407 USB host running 3.10 Kernel resumes in 461 msecs without this patch, but hard disk is assigned a new device address. Same system resumes in 790 msecs with this patch, but with old device address. Signed-off-by:
Pratyush Anand <pratyush.anand@st.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Bryan O'Donoghue authored
commit 6e693739 upstream. The EHCI packet buffer in/out threshold is programmable for Intel Quark X1000 USB host controller, and the default value is 0x20 dwords. The in/out threshold can be programmed to 0x80 dwords (512 Bytes) to maximize the perfomrance, but only when isochronous/interrupt transactions are not initiated by the USB host controller. This patch is to reconfigure the packet buffer in/out threshold as maximal as possible to maximize the performance, and 0x7F dwords (508 Bytes) should be used because the USB host controller initiates isochronous/interrupt transactions. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Patrick Riphagen authored
commit 4bdcde35 upstream. This adds support for new Xsens devices, using Xsens' own Vendor ID. Signed-off-by:
Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by:
Frans Klaver <frans.klaver@xsens.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Patrick Riphagen authored
commit 9273b8a2 upstream. The converters are used in specific products. It can be useful to know which they are exactly. Signed-off-by:
-
Oliver Neukum authored
commit d310d05f upstream. usbfs allows user space to pass down an URB which sets URB_SHORT_NOT_OK for output URBs. That causes usbcore to log messages without limit for a nonsensical disallowed combination. The fix is to silently drop the attribute in usbfs. The problem is reported to exist since 3.14 https://www.virtualbox.org/ticket/13085Signed-off-by:
Oliver Neukum <oneukum@suse.de> Acked-by:
-
Alan Stern authored
commit 977dcfdc upstream. This patch fixes a bug in ohci-hcd. When an URB is unlinked, the corresponding Endpoint Descriptor is added to the ed_rm_list and taken off the hardware schedule. Once the ED is no longer visible to the hardware, finish_unlinks() handles the URBs that were unlinked or have completed. If any URBs remain attached to the ED, the ED is added back to the hardware schedule -- but only if the controller is running. This fails when a controller dies. A non-empty ED does not get added back to the hardware schedule and does not remain on the ed_rm_list; ohci-hcd loses track of it. The remaining URBs cannot be unlinked, which causes the USB stack to hang. The patch changes finish_unlinks() so that non-empty EDs remain on the ed_rm_list if the controller isn't running. This requires moving some of the existing code around, to avoid modifying the ED's hardware fields more than once. Signed-off-by:
-
Alan Stern authored
commit 256dbcd8 upstream. The debug routine fill_async_buffer() in ohci-hcd is buggy: It never produces any output because it forgets to initialize the output buffer size. Also, the debug routine ohci_dump() has an unused argument. This patch adds the correct initialization and removes the unused argument. Signed-off-by:
-
Jan Kara authored
commit 410dd3cf upstream. We did not check relocated directory in any way when processing Rock Ridge 'CL' tag. Thus a corrupted isofs image can possibly have a CL entry pointing to another CL entry leading to possibly unbounded recursion in kernel code and thus stack overflow or deadlocks (if there is a loop created from CL entries). Fix the problem by not allowing CL entry to point to a directory entry with CL entry (such use makes no good sense anyway) and by checking whether CL entry doesn't point to itself. Reported-by:
Chris Evans <cevans@google.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit 4ab25786 upstream. There are a few very theoretical off-by-one bugs in report descriptor size checking when performing a pre-parsing fixup. Fix those. Reported-by:
Ben Hawkes <hawkes@google.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit ad3e14d7 upstream. device_index is a char type and the size of paired_dj_deivces is 7 elements, therefore proper bounds checking has to be applied to device_index before it is used. We are currently performing the bounds checking in logi_dj_recv_add_djhid_device(), which is too late, as malicious device could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the problem in one of the report forwarding functions called from logi_dj_raw_event(). Fix this by performing the check at the earliest possible ocasion in logi_dj_raw_event(). Reported-by:
-
Dave Chiluk authored
commit b76fc285 upstream. Stable_kernel_rules should point submitters of network stable patches to the netdev_FAQ.txt as requests for stable network patches should go to netdev first. Signed-off-by:
Dave Chiluk <chiluk@canonical.com> Signed-off-by:
-
- 14 Aug, 2014 15 commits
-
-
Greg Kroah-Hartman authored
-
Dave Chinner authored
commit 110dc24a upstream. The addition of direct formatting of log items into the CIL linear buffer added alignment restrictions that the start of each vector needed to be 64 bit aligned. Hence padding was added in xlog_finish_iovec() to round up the vector length to ensure the next vector started with the correct alignment. This adds a small number of bytes to the size of the linear buffer that is otherwise unused. The issue is that we then use the linear buffer size to determine the log space used by the log item, and this includes the unused space. Hence when we account for space used by the log item, it's more than is actually written into the iclogs, and hence we slowly leak this space. This results on log hangs when reserving space, with threads getting stuck with these stack traces: Call Trace: [<ffffffff81d15989>] schedule+0x29/0x70 [<ffffffff8150d3a2>] xlog_grant_head_wait+0xa2/0x1a0 [<ffffffff8150d55d>] xlog_grant_head_check+0xbd/0x140 [<ffffffff8150ee33>] xfs_log_reserve+0x103/0x220 [<ffffffff814b7f05>] xfs_trans_reserve+0x2f5/0x310 ..... The 4 bytes is significant. Brain Foster did all the hard work in tracking down a reproducable leak to inode chunk allocation (it went away with the ikeep mount option). His rough numbers were that creating 50,000 inodes leaked 11 log blocks. This turns out to be roughly 800 inode chunks or 1600 inode cluster buffers. That works out at roughly 4 bytes per cluster buffer logged, and at that I started looking for a 4 byte leak in the buffer logging code. What I found was that a struct xfs_buf_log_format structure for an inode cluster buffer is 28 bytes in length. This gets rounded up to 32 bytes, but the vector length remains 28 bytes. Hence the CIL ticket reservation is decremented by 32 bytes (via lv->lv_buf_len) for that vector rather than 28 bytes which are written into the log. The fix for this problem is to separately track the bytes used by the log vectors in the item and use that instead of the buffer length when accounting for the log space that will be used by the formatted log item. Again, thanks to Brian Foster for doing all the hard work and long hours to isolate this leak and make finding the bug relatively simple. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Cc: Bill <billstuff2001@sbcglobal.net> Signed-off-by:
-
Andrey Utkin authored
[ Upstream commit 093758e3 ] This commit is a guesswork, but it seems to make sense to drop this break, as otherwise the following line is never executed and becomes dead code. And that following line actually saves the result of local calculation by the pointer given in function argument. So the proposed change makes sense if this code in the whole makes sense (but I am unable to analyze it in the whole). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 4ec1b010 ] The LDC handshake could have been asynchronously triggered after ldc_bind() enables the ldc_rx() receive interrupt-handler (and thus intercepts incoming control packets) and before vio_port_up() calls ldc_connect(). If that is the case, ldc_connect() should return 0 and let the state-machine progress. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Karl Volz <karl.volz@oracle.com> Signed-off-by:
-
Christopher Alexander Tobias Schulze authored
[ Upstream commit fe418231 ] Fix detection of BREAK on sunsab serial console: BREAK detection was only performed when there were also serial characters received simultaneously. To handle all BREAKs correctly, the check for BREAK and the corresponding call to uart_handle_break() must also be done if count == 0, therefore duplicate this code fragment and pull it out of the loop over the received characters. Patch applies to 3.16-rc6. Signed-off-by:
Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by:
-
Christopher Alexander Tobias Schulze authored
[ Upstream commit 5cdceab3 ] Fix regression in bbc i2c temperature and fan control on some Sun systems that causes the driver to refuse to load due to the bbc_i2c_bussel resource not being present on the (second) i2c bus where the temperature sensors and fan control are located. (The check for the number of resources was removed when the driver was ported to a pure OF driver in mid 2008.) Signed-off-by:
-
David S. Miller authored
[ Upstream commit 4ca9a237 ] Based almost entirely upon a patch by Christopher Alexander Tobias Schulze. In commit db64fe02 ("mm: rewrite vmap layer") lazy VMAP tlb flushing was added to the vmalloc layer. This causes problems on sparc64. Sparc64 has two VMAP mapped regions and they are not contiguous with eachother. First we have the malloc mapping area, then another unrelated region, then the vmalloc region. This "another unrelated region" is where the firmware is mapped. If the lazy TLB flushing logic in the vmalloc code triggers after we've had both a module unload and a vfree or similar, it will pass an address range that goes from somewhere inside the malloc region to somewhere inside the vmalloc region, and thus covering the openfirmware area entirely. The sparc64 kernel learns about openfirmware's dynamic mappings in this region early in the boot, and then services TLB misses in this area. But openfirmware has some locked TLB entries which are not mentioned in those dynamic mappings and we should thus not disturb them. These huge lazy TLB flush ranges causes those openfirmware locked TLB entries to be removed, resulting in all kinds of problems including hard hangs and crashes during reboot/reset. Besides causing problems like this, such huge TLB flush ranges are also incredibly inefficient. A plea has been made with the author of the VMAP lazy TLB flushing code, but for now we'll put a safety guard into our flush_tlb_kernel_range() implementation. Since the implementation has become non-trivial, stop defining it as a macro and instead make it a function in a C source file. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 18f38132 ] The assumption was that update_mmu_cache() (and the equivalent for PMDs) would only be called when the PTE being installed will be accessible by the user. This is not true for code paths originating from remove_migration_pte(). There are dire consequences for placing a non-valid PTE into the TSB. The TLB miss frramework assumes thatwhen a TSB entry matches we can just load it into the TLB and return from the TLB miss trap. So if a non-valid PTE is in there, we will deadlock taking the TLB miss over and over, never satisfying the miss. Just exit early from update_mmu_cache() and friends in this situation. Based upon a report and patch from Christopher Alexander Tobias Schulze. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5aa4ecfd ] This is the prevent previous stores from overlapping the block stores done by the memcpy loop. Based upon a glibc patch by Jose E. Marchesi Signed-off-by:
-
David S. Miller authored
[ Upstream commit b18eb2d7 ] Access to the TSB hash tables during TLB misses requires that there be an atomic 128-bit quad load available so that we fetch a matching TAG and DATA field at the same time. On cpus prior to UltraSPARC-III only virtual address based quad loads are available. UltraSPARC-III and later provide physical address based variants which are easier to use. When we only have virtual address based quad loads available this means that we have to lock the TSB into the TLB at a fixed virtual address on each cpu when it runs that process. We can't just access the PAGE_OFFSET based aliased mapping of these TSBs because we cannot take a recursive TLB miss inside of the TLB miss handler without risking running out of hardware trap levels (some trap combinations can be deep, such as those generated by register window spill and fill traps). Without huge pages it's working perfectly fine, but when the huge TSB got added another chunk of fixed virtual address space was not allocated for this second TSB mapping. So we were mapping both the 8K and 4MB TSBs to the same exact virtual address, causing multiple TLB matches which gives undefined behavior. Signed-off-by:
-
David S. Miller authored
[ Upstream commit e5c460f4 ] This was found using Dave Jone's trinity tool. When a user process which is 32-bit performs a load or a store, the cpu chops off the top 32-bits of the effective address before translating it. This is because we run 32-bit tasks with the PSTATE_AM (address masking) bit set. We can't run the kernel with that bit set, so when the kernel accesses userspace no address masking occurs. Since a 32-bit process will have no mappings in that region we will properly fault, so we don't try to handle this using access_ok(), which can safely just be a NOP on sparc64. Real faults from 32-bit processes should never generate such addresses so a bug check was added long ago, and it barks in the logs if this happens. But it also barks when a kernel user access causes this condition, and that _can_ happen. For example, if a pointer passed into a system call is "0xfffffffc" and the kernel access 4 bytes offset from that pointer. Just handle such faults normally via the exception entries. Signed-off-by:
-
David S. Miller authored
[ Upstream commit fe866433 ] pte_ERROR() is not used anywhere, delete it. For pgd_ERROR() and pmd_ERROR(), output something similar to x86, giving the address of the pgd/pmd as well as it's value. Also provide the caller, since these macros are invoked from pgd_clear_bad() and pmd_clear_bad() which provides little context as to what high level operation was occuring when the BAD state was detected. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 26cf4325 ] Instead of returning false we should at least check the most basic things, otherwise page table corruptions will be very difficult to debug. PMD and PTE tables are of size PAGE_SIZE, so none of the sub-PAGE_SIZE bits should be set. We also complement this with a check that the physical address the pud/pmd points to is valid memory. PowerPC was used as a guide while implementating this. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 0eef331a ] Signed-off-by:
-
David S. Miller authored
[ Upstream commit ee73887e ] In commit b2d43834 ("sparc64: Make PAGE_OFFSET variable."), the MAX_PHYS_ADDRESS_BITS value was increased (to 47). This constant reference to '41UL' was missed. Signed-off-by:
-
