v1 was never implemented and is replaced by v2.

The old uAPI documentation is removed from the header file.

The old uAPI definitions are still kept in the header file to ease
transition for userspace copying these headers. They will be fully
removed down the road.

Link: https://lore.kernel.org/all/20220224142024.147653-12-yishaih@nvidia.comSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The RUNNING_P2P state is designed to support multiple devices in the same
VM that are doing P2P transactions between themselves. When in RUNNING_P2P
the device must be able to accept incoming P2P transactions but should not
generate outgoing P2P transactions.

As an optional extension to the mandatory states it is defined as
in between STOP and RUNNING:
   STOP -> RUNNING_P2P -> RUNNING -> RUNNING_P2P -> STOP

For drivers that are unable to support RUNNING_P2P the core code
silently merges RUNNING_P2P and RUNNING together. Unless driver support
is present, the new state cannot be used in SET_STATE.
Drivers that support this will be required to implement 4 FSM arcs
beyond the basic FSM. 2 of the basic FSM arcs become combination
transitions.

Compared to the v1 clarification, NDMA is redefined into FSM states and is
described in terms of the desired P2P quiescent behavior, noting that
halting all DMA is an acceptable implementation.

Link: https://lore.kernel.org/all/20220224142024.147653-11-yishaih@nvidia.comSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Replace the existing region based migration protocol with an ioctl based
protocol. The two protocols have the same general semantic behaviors, but
the way the data is transported is changed.

This is the STOP_COPY portion of the new protocol, it defines the 5 states
for basic stop and copy migration and the protocol to move the migration
data in/out of the kernel.

Compared to the clarification of the v1 protocol Alex proposed:

https://lore.kernel.org/r/163909282574.728533.7460416142511440919.stgit@omen

This has a few deliberate functional differences:

 - ERROR arcs allow the device function to remain unchanged.

 - The protocol is not required to return to the original state on
   transition failure. Instead userspace can execute an unwind back to
   the original state, reset, or do something else without needing kernel
   support. This simplifies the kernel design and should userspace choose
   a policy like always reset, avoids doing useless work in the kernel
   on error handling paths.

 - PRE_COPY is made optional, userspace must discover it before using it.
   This reflects the fact that the majority of drivers we are aware of
   right now will not implement PRE_COPY.

 - segmentation is not part of the data stream protocol, the receiver
   does not have to reproduce the framing boundaries.

The hybrid FSM for the device_state is described as a Mealy machine by
documenting each of the arcs the driver is required to implement. Defining
the remaining set of old/new device_state transitions as 'combination
transitions' which are naturally defined as taking multiple FSM arcs along
the shortest path within the FSM's digraph allows a complete matrix of
transitions.

A new VFIO_DEVICE_FEATURE of VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE is
defined to replace writing to the device_state field in the region. This
allows returning a brand new FD whenever the requested transition opens
a data transfer session.

The VFIO core code implements the new feature and provides a helper
function to the driver. Using the helper the driver only has to
implement 6 of the FSM arcs and the other combination transitions are
elaborated consistently from those arcs.

A new VFIO_DEVICE_FEATURE of VFIO_DEVICE_FEATURE_MIGRATION is defined to
report the capability for migration and indicate which set of states and
arcs are supported by the device. The FSM provides a lot of flexibility to
make backwards compatible extensions but the VFIO_DEVICE_FEATURE also
allows for future breaking extensions for scenarios that cannot support
even the basic STOP_COPY requirements.

The VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE with the GET option (i.e.
VFIO_DEVICE_FEATURE_GET) can be used to read the current migration state
of the VFIO device.

Data transfer sessions are now carried over a file descriptor, instead of
the region. The FD functions for the lifetime of the data transfer
session. read() and write() transfer the data with normal Linux stream FD
semantics. This design allows future expansion to support poll(),
io_uring, and other performance optimizations.

The complicated mmap mode for data transfer is discarded as current qemu
doesn't take meaningful advantage of it, and the new qemu implementation
avoids substantially all the performance penalty of using a read() on the
region.

Link: https://lore.kernel.org/all/20220224142024.147653-10-yishaih@nvidia.comSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Invoke a new device op 'device_feature' to handle just the data array
portion of the command. This lifts the ioctl validation to the core code
and makes it simpler for either the core code, or layered drivers, to
implement their own feature values.

Provide vfio_check_feature() to consolidate checking the flags/etc against
what the driver supports.

Link: https://lore.kernel.org/all/20220224142024.147653-9-yishaih@nvidia.comSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Update mlx5 command list and error return function to handle migration
commands.

Link: https://lore.kernel.org/all/20220224142024.147653-8-yishaih@nvidia.comSigned-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Introduce migration IFC related stuff to enable migration commands.

Link: https://lore.kernel.org/all/20220224142024.147653-7-yishaih@nvidia.comSigned-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Expose an API to get the mlx5 core device from a given VF PCI device if
mlx5_core is its driver.

Upon the get API we stay with the intf_state_mutex locked to make sure
that the device can't be gone/unloaded till the caller will complete
its job over the device, this expects to be for a short period of time
for any flow that the lock is taken.

Upon the put API we unlock the intf_state_mutex.

The use case for those APIs is the migration flow of a VF over VFIO PCI.
In that case the VF doesn't ride on mlx5_core, because the device is
driving *two* different PCI devices, the PF owned by mlx5_core and the
VF owned by the vfio driver.

The mlx5_core of the PF is accessed only during the narrow window of the
VF's ioctl that requires its services.

This allows the PF driver to be more independent of the VF driver, so
long as it doesn't reset the FW.

Link: https://lore.kernel.org/all/20220224142024.147653-6-yishaih@nvidia.comSigned-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

There are some cases where a SR-IOV VF driver will need to reach into and
interact with the PF driver. This requires accessing the drvdata of the PF.

Provide a function pci_iov_get_pf_drvdata() to return this PF drvdata in a
safe way. Normally accessing a drvdata of a foreign struct device would be
done using the device_lock() to protect against device driver
probe()/remove() races.

However, due to the design of pci_enable_sriov() this will result in a
ABBA deadlock on the device_lock as the PF's device_lock is held during PF
sriov_configure() while calling pci_enable_sriov() which in turn holds the
VF's device_lock while calling VF probe(), and similarly for remove.

This means the VF driver can never obtain the PF's device_lock.

Instead use the implicit locking created by pci_enable/disable_sriov(). A
VF driver can access its PF drvdata only while its own driver is attached,
and the PF driver can control access to its own drvdata based on when it
calls pci_enable/disable_sriov().

To use this API the PF driver will setup the PF drvdata in the probe()
function. pci_enable_sriov() is only called from sriov_configure() which
cannot happen until probe() completes, ensuring no VF races with drvdata
setup.

For removal, the PF driver must call pci_disable_sriov() in its remove
function before destroying any of the drvdata. This ensures that all VF
drivers are unbound before returning, fencing concurrent access to the
drvdata.

The introduction of a new function to do this access makes clear the
special locking scheme and the documents the requirements on the PF/VF
drivers using this.

Link: https://lore.kernel.org/all/20220224142024.147653-5-yishaih@nvidia.comSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Virtual functions depend on physical function for device access (for example
firmware host PAGE management), so make sure to disable SR-IOV once PF is gone.

This will prevent also the below warning if PF has gone before disabling SR-IOV.
"driver left SR-IOV enabled after remove"

Next patch from this series will rely on that when the VF may need to
access safely the PF 'driver data'.

Link: https://lore.kernel.org/all/20220224142024.147653-4-yishaih@nvidia.comSigned-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Instead open-code iteration to compare virtfn internal index, use newly
introduced pci_iov_vf_id() call.

Link: https://lore.kernel.org/all/20220224142024.147653-3-yishaih@nvidia.comSigned-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The PCI core uses the VF index internally, often called the vf_id,
during the setup of the VF, eg pci_iov_add_virtfn().

This index is needed for device drivers that implement live migration
for their internal operations that configure/control their VFs.

Specifically, mlx5_vfio_pci driver that is introduced in coming patches
from this series needs it and not the bus/device/function which is
exposed today.

Add pci_iov_vf_id() which computes the vf_id by reversing the math that
was used to create the bus/device/function.

Link: https://lore.kernel.org/all/20220224142024.147653-2-yishaih@nvidia.comSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Pull locking fix from Borislav Petkov:
 "Fix a NULL ptr dereference when dumping lockdep chains through
  /proc/lockdep_chains"

* tag 'locking_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Correct lock_classes index mapping

Pull x86 fixes from Borislav Petkov:

 - Fix the ptrace regset xfpregs_set() callback to behave according to
   the ABI

 - Handle poisoned pages properly in the SGX reclaimer code

* tag 'x86_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ptrace: Fix xfpregs_set()'s incorrect xmm clearing
  x86/sgx: Fix missing poison handling in reclaimer

Pull scheduler fix from Borislav Petkov:
 "Fix task exposure order when forking tasks"

* tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix yet more sched_fork() races

Pull EDAC fix from Borislav Petkov:
 "Fix a long-standing struct alignment bug in the EDAC struct allocation
  code"

* tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC: Fix calculation of returned address and next offset in edac_align_ptr()

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers.

  The ufs and qedi fixes are minor; the lpfc one is a bit bigger because
  it involves adding a heuristic to detect and deal with common but not
  standards compliant behaviour"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix divide by zero in ufshcd_map_queues()
  scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop
  scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()

Pull dmaengine fixes from Vinod Koul:
 "A bunch of driver fixes for:

   - ptdma error handling in init

   - lock fix in at_hdmac

   - error path and error num fix for sh dma

   - pm balance fix for stm32"

* tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: shdma: Fix runtime PM imbalance on error
  dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size
  dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe
  dmaengine: sh: rcar-dmac: Check for error num after setting mask
  dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet()
  dmaengine: ptdma: Fix the error handling path in pt_core_init()

Pull i2c fixes from Wolfram Sang:
 "Some driver updates, a MAINTAINERS fix, and additions to COMPILE_TEST
  (so we won't miss build problems again)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: remove duplicate entry for i2c-qcom-geni
  i2c: brcmstb: fix support for DSL and CM variants
  i2c: qup: allow COMPILE_TEST
  i2c: imx: allow COMPILE_TEST
  i2c: cadence: allow COMPILE_TEST
  i2c: qcom-cci: don't put a device tree node before i2c_add_adapter()
  i2c: qcom-cci: don't delete an unregistered adapter
  i2c: bcm2835: Avoid clock stretching timeouts

Pull input fixes from Dmitry Torokhov:

 - a fix for Synaptics touchpads in RMI4 mode failing to suspend/resume
   properly because I2C client devices are now being suspended and
   resumed asynchronously which changed the ordering

 - a change to make sure we do not set right and middle buttons
   capabilities on touchpads that are "buttonpads" (i.e. do not have
   separate physical buttons)

 - a change to zinitix touchscreen driver adding more compatible
   strings/IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - set up dependency between PS/2 and SMBus companions
  Input: zinitix - add new compatible strings
  Input: clear BTN_RIGHT/MIDDLE on buttonpads

Pull power supply fixes from Sebastian Reichel:
 "Three regression fixes for the 5.17 cycle:

   - build warning fix for power-supply documentation

   - pointer size fix in cw2015 battery driver

   - OOM handling in bq256xx charger driver"

* tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: bq256xx: Handle OOM correctly
  power: supply: core: fix application of sizeof to pointer
  power: supply: fix table problem in sysfs-class-power

Merge tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull mount_setattr test/doc fixes from Christian Brauner:
 "This contains a fix for one of the selftests for the mount_setattr
  syscall to create idmapped mounts, an entry for idmapped mounts for
  maintainers, and missing kernel documentation for the helper we split
  out some time ago to get and yield write access to a mount when
  changing mount properties"

* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: add kernel doc for mnt_{hold,unhold}_writers()
  MAINTAINERS: add entry for idmapped mounts
  tests: fix idmapped mount_setattr test

Pull pidfd fix from Christian Brauner:
 "This fixes a problem reported by lockdep when installing a pidfd via
  fd_install() with siglock and the tasklisk write lock held in
  copy_process() when calling clone()/clone3() with CLONE_PIDFD.

  Originally a pidfd was created prior to holding any of these locks but
  this required a call to ksys_close(). So quite some time ago in
  6fd2fe49 ("copy_process(): don't use ksys_close() on cleanups") we
  switched to a get_unused_fd_flags() + fd_install() model.

  As part of that we moved fd_install() as late as possible. This was
  done for two main reasons. First, because we needed to ensure that we
  call fd_install() past the point of no return as once that's called
  the fd is live in the task's file table. Second, because we tried to
  ensure that the fd is visible in /proc/<pid>/fd/<pidfd> right when the
  task is visible.

  This fix moves the fd_install() to an even later point which means
  that a task will be visible in proc while the pidfd isn't yet under
  /proc/<pid>/fd/<pidfd>.

  While this is a user visible change it's very unlikely that this will
  have any impact. Nobody should be relying on that and if they do we
  need to come up with something better but again, it's doubtful this is
  relevant"

* tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  copy_process(): Move fd_install() out of sighand->siglock critical section

Merge branch 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucounts fixes from Eric Biederman:
 "Michal Koutný recently found some bugs in the enforcement of
  RLIMIT_NPROC in the recent ucount rlimit implementation.

  In this set of patches I have developed a very conservative approach
  changing only what is necessary to fix the bugs that I can see
  clearly. Cleanups and anything that is making the code more consistent
  can follow after we have the code working as it has historically.

  The problem is not so much inconsistencies (although those exist) but
  that it is very difficult to figure out what the code should be doing
  in the case of RLIMIT_NPROC.

  All other rlimits are only enforced where the resource is acquired
  (allocated). RLIMIT_NPROC by necessity needs to be enforced in an
  additional location, and our current implementation stumbled it's way
  into that implementation"

* 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Handle wrapping in is_ucounts_overlimit
  ucounts: Move RLIMIT_NPROC handling after set_user
  ucounts: Base set_cred_ucounts changes on the real user
  ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1
  rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user

The driver is already covered in the ARM/QUALCOMM section. Also, Akash
Asthana's email bounces meanwhile and Mukesh Savaliya has never
responded to mails regarding this driver.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Where commit 4ef0c5c6 ("kernel/sched: Fix sched_fork() access an
invalid sched_task_group") fixed a fork race vs cgroup, it opened up a
race vs syscalls by not placing the task on the runqueue before it
gets exposed through the pidhash.

Commit 13765de8 ("sched/fair: Fix fault in reweight_entity") is
trying to fix a single instance of this, instead fix the whole class
of issues, effectively reverting this commit.

Fixes: 4ef0c5c6 ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Zhang Qiao <zhangqiao22@huawei.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net

Pull NFS client bugfixes from Anna Schumaker:

 - Fix unnecessary changeattr revalidations

 - Fix resolving symlinks during directory lookups

 - Don't report writeback errors in nfs_getattr()

* tag 'nfs-for-5.17-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Do not report writeback errors in nfs_getattr()
  NFS: LOOKUP_DIRECTORY is also ok with symlinks
  NFS: Remove an incorrect revalidation in nfs4_update_changeattr_locked()

Pull ACPI fixes from Rafael Wysocki:
 "These make an excess warning message go away and fix a recently
  introduced boot failure on a vintage machine.

  Specifics:

   - Change the log level of the "table not found" message in
     acpi_table_parse_entries_array() to debug to prevent it from
     showing up in the logs unnecessarily (Dan Williams)

   - Add a C-state limit quirk for 32-bit ThinkPad T40 to prevent it
     from crashing on boot after recent changes in the ACPI processor
     driver (Woody Suwalski)"

* tag 'acpi-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40
  ACPI: tables: Quiet ACPI table not found warning

Pull RISC-V fixes from Palmer Dabbelt:
 "A set of three fixes, all aimed at fixing some fallout from the recent
  sparse hart ID support"

* tag 'riscv-for-linus-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid ordering
  RISC-V: Fix handling of empty cpu masks
  RISC-V: Fix hartid mask handling for hartid 31 and up

When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we
create SMBus companion devices that are attached to I2C/SMBus controllers.
However, when suspending and resuming, we also need to make sure that we
take into account the PS/2 device they are associated with, so that PS/2
device is suspended after the companion and resumed before it, otherwise
companions will not work properly. Before I2C devices were marked for
asynchronous suspend/resume, this ordering happened naturally, but now we
need to enforce it by establishing device links, with PS/2 devices being
suppliers and SMBus companions being consumers.

Fixes: 172d9319 ("i2c: enable async suspend/resume on i2c client devices")
Reported-and-tested-by: Hugh Dickins <hughd@google.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com
Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge fix for a recent boot lockup regression on 32-bit ThinkPad T40.

* acpi-processor:
  ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40

Pull MTD fixes from Miquel Raynal:
 "MTD changes:

   - Qcom:
      - Don't print error message on -EPROBE_DEFER
      - Fix kernel panic on skipped partition
      - Fix missing free for pparts in cleanup

   - phram: Prevent divide by zero bug in phram_setup()

  Raw NAND controller changes:

   - ingenic: Fix missing put_device in ingenic_ecc_get

   - qcom: Fix clock sequencing in qcom_nandc_probe()

   - omap2: Prevent invalid configuration and build error

   - gpmi: Don't leak PM reference in error path

   - brcmnand: Fix incorrect sub-page ECC status"

* tag 'mtd/fixes-for-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status
  mtd: rawnand: gpmi: don't leak PM reference in error path
  mtd: phram: Prevent divide by zero bug in phram_setup()
  mtd: rawnand: omap2: Prevent invalid configuration and build error
  mtd: parsers: qcom: Fix missing free for pparts in cleanup
  mtd: parsers: qcom: Fix kernel panic on skipped partition
  mtd: parsers: qcom: Don't print error message on -EPROBE_DEFER
  mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()
  mtd: rawnand: ingenic: Fix missing put_device in ingenic_ecc_get

Pull block fixes from Jens Axboe:

 - Surprise removal fix (Christoph)

 - Ensure that pages are zeroed before submitted for userspace IO
   (Haimin)

 - Fix blk-wbt accounting issue with BFQ (Laibin)

 - Use bsize for discard granularity in loop (Ming)

 - Fix missing zone handling in blk_complete_request() (Pankaj)

* tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-block:
  block/wbt: fix negative inflight counter when remove scsi device
  block: fix surprise removal for drivers calling blk_set_queue_dying
  block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern
  block: loop:use kstatfs.f_bsize of backing file to set discard granularity
  block: Add handling for zone append command in blk_complete_request

Pull sound fixes from Takashi Iwai:
 "A collection of small patches, mostly for old and new regressions and
  device-specific fixes.

   - Regression fixes regarding ALSA core SG-buffer helpers

   - Regression fix for Realtek HD-audio mutex deadlock

   - Regression fix for USB-audio PM resume error

   - More coverage of ASoC core control API notification fixes

   - Old regression fixes for HD-audio probe mask

   - Fixes for ASoC Realtek codec work handling

   - Other device-specific quirks / fixes"

* tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ASoC: intel: skylake: Set max DMA segment size
  ASoC: SOF: hda: Set max DMA segment size
  ALSA: hda: Set max DMA segment size
  ALSA: hda/realtek: Fix deadlock by COEF mutex
  ALSA: usb-audio: Don't abort resume upon errors
  ALSA: hda: Fix missing codec probe on Shenker Dock 15
  ALSA: hda: Fix regression on forced probe mask option
  ALSA: hda/realtek: Add quirk for Legion Y9000X 2019
  ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra
  ASoC: wm_adsp: Correct control read size when parsing compressed buffer
  ASoC: qcom: Actually clear DMA interrupt register for HDMI
  ALSA: memalloc: invalidate SG pages before sync
  ALSA: memalloc: Fix dma_need_sync() checks
  MAINTAINERS: update cros_ec_codec maintainers
  ASoC: rt5682: do not block workqueue if card is unbound
  ASoC: rt5668: do not block workqueue if card is unbound
  ASoC: rt5682s: do not block workqueue if card is unbound
  ASoC: tas2770: Insert post reset delay
  ASoC: Revert "ASoC: mediatek: Check for error clk pointer"
  ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver
  ...

Pull arm64 fix from Catalin Marinas:
 "Fix wrong branch label in the EL2 GICv3 initialisation code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Correct wrong label in macro __init_el2_gicv3

Pull powerpc fixes from Michael Ellerman:

 - Fix boot failure on 603 with DEBUG_PAGEALLOC and KFENCE

 - Fix 32-build with newer binutils that rejects 'ptesync' etc

Thanks to Anders Roxell, Christophe Leroy, and Maxime Bizon.

* tag 'powerpc-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/lib/sstep: fix 'ptesync' build error
  powerpc/603: Fix boot failure with DEBUG_PAGEALLOC and KFENCE

Pull cifs fixes from Steve French:
 "Six small smb3 client fixes, three for stable:

   - fix for snapshot mount option

   - two ACL related fixes

   - use after free race fix

   - fix for confusing warning message logged with older dialects"

* tag '5.17-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix confusing unneeded warning message on smb2.1 and earlier
  cifs: modefromsids must add an ACE for authenticated users
  cifs: fix double free race when mount fails in cifs_get_root()
  cifs: do not use uninitialized data in the owner/group sid
  cifs: fix set of group SID via NTSD xattrs
  smb3: fix snapshot mount option

xfpregs_set() handles 32-bit REGSET_XFP and 64-bit REGSET_FP. The actual
code treats these regsets as modern FX state (i.e. the beginning part of
XSTATE). The declarations of the regsets thought they were the legacy
i387 format. The code thought they were the 32-bit (no xmm8..15) variant
of XSTATE and, for good measure, made the high bits disappear by zeroing
the wrong part of the buffer. The latter broke ptrace, and everything
else confused anyone trying to understand the code. In particular, the
nonsense definitions of the regsets confused me when I wrote this code.

Clean this all up. Change the declarations to match reality (which
shouldn't change the generated code, let alone the ABI) and fix
xfpregs_set() to clear the correct bits and to only do so for 32-bit
callers.

Fixes: 6164331d ("x86/fpu: Rewrite xfpregs_set()")
Reported-by: Luís Ferreira <contact@lsferreira.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215524
Link: https://lore.kernel.org/r/YgpFnZpF01WwR8wU@zn.tnic

DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.

Fixes: e2e5a2c6 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Fixes to ftrace, exec, and seccomp tests build, run-time and install
  bugs. These bugs are in the way of running the tests"

* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
  selftests/seccomp: Fix seccomp failure by adding missing headers
  selftests/exec: Add non-regular to TEST_GEN_PROGS