The broadcom clk driver Kconfig file selects and depends on the
COMMON_CLK_IPROC config for different SoC specific drivers. Let's
simplify this by always selecting the COMMON_CLK_IPROC config,
turning it into a set of library code. We still want to retain
the SoC specific options, so we leave those in place. Since we're
here we also drop COMMON_CLK dependency because that's implicitly
handled by including this file in drivers/clk/Kconfig in the
right place and also make CLK_BCM_KONA default to y on the
architecture it exists for instead of plain default y.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <ray.jui@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
[sboyd@codeaurora.org: Sorted list]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Prevent creating clk alias for non existing gmac_gmii_ref_clk_div clock and,
this way, eliminate excessive error message during boot:

 "ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div"

Fixes: c097338e ("ARM: dts: dra7: cpsw: fix clocks tree")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The VEC clock requires needs to be set at exactly 108MHz. Allow rate
change propagation on PLLH_AUX to match this requirement wihtout
impacting other IPs (PLLH is currently only used by the HDMI encoder,
which cannot be enabled when the VEC encoder is enabled).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set
to a precise rate (in our case 108MHz). With the current implementation,
where peripheral clocks are not allowed to forward rate change requests
to their parents, it is impossible to match this requirement unless the
bootloader has configured things correctly, or a specific rate has been
assigned through the DT (with the assigned-clk-rates property).

Add a new field to struct bcm2835_clock_data to specify which parent
clocks accept rate change propagation, and support set rate propagation
in bcm2835_clock_determine_rate().
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

bcm2835_pll_divider_off() is resetting the divider field in the A2W reg
to zero when disabling the clock.

Make sure we preserve this value by reading the previous a2w_reg value
first and ORing the result with A2W_PLL_CHANNEL_DISABLE.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term
frequency drift. The frequency drift magnitude depends on the VCO update
rate, which is inversely proportional to the PLL divider. The kernel
DPLL configuration code results in a high value for the divider, leading
to a long term drift high enough to cause USB transmission errors. In
the worst case the USB PHY's ULPI interface can stop responding,
breaking USB operation completely. This manifests itself on the
Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the
cable is bad?' in the kernel log.

Errata sprz319 advisory 2.1 documents PLL values that minimize the
drift. Use them automatically when DPLL5 is used for USB operation,
which we detect based on the requested clock rate. The clock framework
will still compute the PLL parameters and resulting rate as usual, but
the PLL M and N values will then be overridden. This can result in the
effective clock rate being slightly different than the rate cached by
the clock framework, but won't cause any adverse effect to USB
operation.
Signed-off-by: Richard Watts <rrw@kynesim.co.uk>
[Upported from v3.2 to v4.9]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188561. Function
wm831x_clkout_is_prepared() returns "true" when it fails to read
CLOCK_CONTROL_1. "true" means the device is already prepared. So
return "true" on the read failure seems improper.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Fixes: f05259a6 ("clk: wm831x: Add initial WM831x clock driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add more data to 64bit SoCs for the cpufreq support.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Core support code for CPU frequency changes, which will be used by
the generic cpufreq driver.

The register view is different from the generic clk-mux; it has
a separate status register, and an update bit to load the register
setting.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'v4.10-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk driver updates from Heiko Stuebner:

A new clock controller for the rk1108 soc (single-core Cortex-A7+DSP),
a fix making sure the cpuclk rate is actually valid, before trying to
set it and a copy-paste fix for the rk3399's testclk.

* tag 'v4.10-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: add clock controller for rk1108
  dt-bindings: add documentation for rk1108 cru
  clk: rockchip: add dt-binding header for rk1108
  clk: rockchip: fix copy-paste error in rk3399 testclk
  clk: rockchip: validity should be checked prior to cpu clock rate change

The venus video ip's internal core blocks are under the
control of the firmware and their powerdomains needs to be
'ON' only when used by the firmware. So putting it into
hw controlled mode lets this to happen, otherwise the firmware
hangs checking for this.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Some GDSCs might support a HW control mode, where in the power
domain (gdsc) is brought in and out of low power state (while
unsued) without any SW assistance, saving power.
Such GDSCs can be configured in a HW control mode when powered on
until they are explicitly requested to be powered off by software.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-fixes:
  clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX
  clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock
  clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it

With commit f4e87150 ("clk: iproc: Make clocks visible options"),
COMMON_CLK_IPROC gained a dependency on ARCH_BCM_IPROC, yet CLK_BCM_63XX
also selects that option, this causes the following Kconfig warning:

warning: (CLK_BCM_63XX) selects COMMON_CLK_IPROC which has unmet direct
dependencies ((ARCH_BCM_IPROC || COMPILE_TEST) && COMMON_CLK)

Fix this by adding proper depends for COMMON_CLK_IPROC

Fixes: f4e87150 ("clk: iproc: Make clocks visible options")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
[sboyd@codeaurora.org: Drop default part as it's redundant]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

In the user manual of A33 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner [1], the LDOs are enabled during the clock's enabling
process.

The clock failed to generate output if the two LDOs are not enabled.

Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.

[1] https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/clk/sunxi/clk-sun8iw5.c#L429

Fixes: d05c748b ("clk: sunxi-ng: Add A33 CCU support")
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

There is no fixed divider on pllh_aux.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Fix the clk_hw references to the actual clocks and add a xlate function
to return the hw pointers from the already existing static array.
Reported-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Fix the clk_hw references to the actual clocks and add a xlate function
to return the hw pointers from the already existing static array.
Reported-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The sdcc driver for msm8996/msm8916/msm8974/msm8994 and apq8084
expects a clk_set_rate() on the sdcc rcg clk to set
a floor value of supported clk rate closest to the requested
rate, by looking up the frequency table.
So move all the sdcc rcgs on all these platforms to use the
newly introduced clk_rcg2_floor_ops
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The default behaviour with clk_rcg2_ops is for the
clk_round_rate()/clk_set_rate() to return/set a ceil clock
rate closest to the requested rate by looking up the corresponding
frequency table.
However, we do have some instances (mainly sdcc on various platforms)
of clients expecting a clk_set_rate() to set a floor value instead.
Add a new clk_rcg2_floor_ops to handle this for such specific
rcg instances
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Pull Exynos5433 SoC updates from Sylwester Nawrocki:

 - addition of missing documentation and DT properties for the CMU_AUD
   block source clocks,
 - correction of CMU_FSYS parent clock definition,
 - marking as critical clocks which have to be enabled in order
   to access control registers of child CMUs.

* tag 'clk-v4.10-exynos5433' of git://linuxtv.org/snawrocki/samsung:
  clk: exynos5433: Mark some clocks as critical
  clk: exynos5433: Add documentation for the audio block parent clocks
  clk: exynos5433: Fix parent clocks for FSYS block

The PLL-MIPI clock is somewhat special as it has its own LDOs which
need to be turned on for this PLL to actually work and output a clock
signal.

Add the 2 LDO enable bits to the gate bits. This fixes issues with
the TCON not sending vblank interrupts when the tcon and dot clock are
indirectly clocked from the PLL-MIPI clock.

Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Some parent clocks of the Exynos5433 CMUs must be always enabled to access
any register in the given CMU or devices connected to it. For the time
being, until a proper solution based on runtime PM is applied, mark those
clocks as critical (instead of ignore unused) to prevent disabling them.
Reported-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Merge tag 'clk-renesas-for-v4.10-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull more clk driver updates from Geert Uytterhoeven:

  - CSI2 and VIN clocks for R-Car M3-W,
  - Clock drivers for new RZ/G1M and RZ/G1E SoCs,
  - Minor bug fix for R-Car H3.

* tag 'clk-renesas-for-v4.10-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: cpg-mssr: Add R8A7745 support
  clk: renesas: cpg-mssr: Add R8A7743 support
  clk: renesas: cpg-mssr: Add common R-Car Gen2 support
  clk: renesas: r8a7795: Fix HDMI parent clock
  clk: renesas: r8a7796: Add VIN clocks
  clk: renesas: r8a7796: Add CSI2 clocks

Merge tag 'clk-renesas-for-v4.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull Renesas clk driver updates from Geerty Uytterhoeven:

  - Add R-Car RST driver for obtaining mode pin state, and move the
    related functionality from platform code to DT,
  - Add r8a7743 and r8a7745 CPG Core Clock Definitions.

The commits here are intermingled with arm-soc material because
of the hard dependency we're breaking between mach code and
driver code. We're replacing that with a driver dependency
between the soc driver and the clk driver.

* tag 'clk-renesas-for-v4.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (25 commits)
  clk: renesas: Add r8a7745 CPG Core Clock Definitions
  clk: renesas: Add r8a7743 CPG Core Clock Definitions
  clk: renesas: rcar-gen2: Remove obsolete rcar_gen2_clocks_init()
  clk: renesas: r8a7779: Remove obsolete r8a7779_clocks_init()
  clk: renesas: r8a7778: Remove obsolete r8a7778_clocks_init()
  ARM: shmobile: rcar-gen2: Stop passing mode pins state to clock driver
  ARM: shmobile: r8a7779: Stop passing mode pins state to clock driver
  ARM: shmobile: r8a7778: Stop passing mode pins state to clock driver
  clk: renesas: rcar-gen3-cpg: Remove obsolete rcar_gen3_read_mode_pins()
  clk: renesas: r8a7796: Obtain mode pin values from R-Car RST driver
  clk: renesas: r8a7795: Obtain mode pin values from R-Car RST driver
  clk: renesas: rcar-gen2: Obtain mode pin values using RST driver
  clk: renesas: r8a7779: Obtain mode pin values from R-Car RST driver
  clk: renesas: r8a7778: Obtain mode pin values using R-Car RST driver
  arm64: renesas: r8a7796 dtsi: Add device node for RST module
  arm64: renesas: r8a7795 dtsi: Add device node for RST module
  ARM: dts: r8a7794: Add device node for RST module
  ARM: dts: r8a7793: Add device node for RST module
  ARM: dts: r8a7792: Add device node for RST module
  ARM: dts: r8a7791: Add device node for RST module
  ...

Audio block requires access to two parent clocks: audio PLL and oscillator,
so add this information to device tree bindings documentation.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

The proper parent clock for FSYS block is "aclk_fsys_200"
according to the Exynos5433 reference manual.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Some checkpatch warnings about spaces were missed and we didn't
mark two structs as static. Clean it up.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Pull Allwinner clock changes from Maxime Ripard:

The usual patches from us, but most notably the introduction of the A64
clocks unit.

* tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks
  clk: sunxi-ng: sun8i-a23: Set CLK_SET_RATE_PARENT for audio module clocks
  clk: sunxi-ng: Add A64 clocks
  clk: sunxi-ng: Implement minimum for multipliers
  clk: sunxi-ng: Add minimums for all the relevant structures and clocks
  clk: sunxi-ng: Finish to convert to structures for arguments
  clk: sunxi-ng: Remove the use of rational computations
  clk: sunxi-ng: Rename the internal structures
  clk: sunxi: mod0: improve function-level documentation

Merge tag 'imx-clk-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next

Pull i.MX clock updates from Shawn Guo:

 - A patch series to fix the long standing issue with glitchy parent
   mux of ldb_di_clk, which can hang up LVDS display when ipu_di_clk
   is sourced from ldb_di_clk.
 - A patch to add imx6ull clock support on top of imx6ul clock driver.

* tag 'imx-clk-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: clk-imx6ul: add clk support for imx6ull
  clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf

* clk-fixes:
  clk: efm32gg: Pass correct type to hw provider registration
  clk: berlin: Pass correct type to hw provider registration
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent

Merge tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes

Pull Allwinner clock fixes from Maxime Ripard:

Two fixes, one for the old clock code, one for the new implementation.

* tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent

Dan Carpenter reports that we're passing a pointer to a pointer
here when we should just be passing a pointer. Pass the right
pointer so that the of_clk_hw_onecell_get() sees the appropriate
data pointer on its end.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 9337631f ("clk: efm32gg: Migrate to clk_hw based OF and registration APIs")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Dan Carpenter reports that we're passing a pointer to a pointer
here when we should just be passing a pointer. Pass the right
pointer so that the of_clk_hw_onecell_get() sees the appropriate
data pointer on its end.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jisheng Zhang <jszhang@marvell.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Fixes: f6475e29 ("clk: berlin: Migrate to clk_hw based registration and OF APIs")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add the clock tree definition and driver for rk1108 SoC.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Jacob Chen <jacob2.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This adds the dt-binding documentation for the clock and reset unit
found on Rockchip rk1108 SoCs.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add the dt-bindings header for the rk1108, that gets shared
between the clock controller and the clock references in the dts.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Fix RK3368_* to RK3399_* for rk3399 clk_test clock.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>