- 21 Oct, 2017 3 commits
-
-
Eric Yang authored
A previous change moved link_disconnect_sink after dpcd read, this causes the sink count to be overwritten which in turn causes another detection to be triggered in the short pulse handler, which brings down the display. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Andrew Jiang authored
This allows us to not always have scaling on, which causes issues with validation and causes the text to blur slightly. Signed-off-by:
Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by:
-
Hersen Wu authored
Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
- 17 Oct, 2017 21 commits
-
-
Martin Tsai authored
Signed-off-by:
Martin Tsai <martin.tsai@amd.com> Reviewed-by:
-
Dave Airlie authored
Pull in drm-next for the object find API changes. Fix the one place the API crashes. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
No longer used. Reviewed-by:
-
Alex Deucher authored
Use udelay directly. Reviewed-by:
-
Alex Deucher authored
It's not used outside the file. Reviewed-by:
-
Alex Deucher authored
Not used. Reviewed-by:
-
Alex Deucher authored
To match kernel standards. No intended functional change. Reviewed-by:
-
Alex Deucher authored
It's only used in this file. Reviewed-by:
-
Alex Deucher authored
To match kernel standards. No intended functional change. Reviewed-by:
-
Alex Deucher authored
not used. Reviewed-by:
-
Alex Deucher authored
Not used anywhere. Reviewed-by:
-
Alex Deucher authored
Not used outside of that file. Reviewed-by:
-
Alex Deucher authored
To match kernel standards. No intended functional change. Reviewed-by:
-
Alex Deucher authored
s/amdgpu_dm_find_first_crct_matching_connector/ amdgpu_dm_find_first_crtc_matching_connector/ And while here, make it static. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Leo (Sunpeng) Li authored
in amdgpu_dm_atomic_commit_tail. Just use crtc instead. Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Leo (Sunpeng) Li <sunpeng.li@amd.com> Signed-off-by:
-
Leo (Sunpeng) Li authored
undersacn -> underscan Reviewed-by:
-
Leo (Sunpeng) Li authored
Use dm_new_*_state and dm_old_*_state for their respective amdgpu_dm new and old object states. Helps with readability, and enforces use of new DRM api (choose either new, or old). Reviewed-by:
-
Leo (Sunpeng) Li authored
Use new_*_state and old_*_state for their respective new/old DRM object states. Reviewed-by:
-
Leo (Sunpeng) Li authored
To conform to DRM's new API, we should not be accessing a DRM object's internal state directly. Rather, the DRM for_each_old/new_* iterators, and drm_atomic_get_old/new_* interface should be used. This is an ongoing process. For now, update the DRM-facing atomic functions, where the atomic state object is given. Reviewed-by:
-
Dave Airlie authored
Use the correct for_each_new/old_* iterators instead of for_each_* The following functions were considered: amdgpu_dm_find_first_crtc_matching_connector: use for_each_new - Old from_state_var flag was always choosing the new state amdgpu_dm_display_resume: use for_each_new - drm_atomic_helper_duplicate_state is called during suspend to cache the state - It sets 'state' within the state triplet to 'new_state' amdgpu_dm_commit_planes: use for_each_old - Called after the state was swapped (via atomic commit tail) amdgpu_dm_atomic_commit: use for_each_new - Called before the state is swapped amdgpu_dm_atomic_commit_tail: use for_each_old - Called after the state was swapped dm_update_crtcs_state: use for_each_new - Called before the state is swapped (via atomic check) amdgpu_dm_atomic_check: use for_each_new - Called before the state is swapped v2: Split out typo fixes to a new patch. v3: Say "functions considered" instead of "affected functions". The latter implies that changes are made to each. [airlied: squashed with my hacks] Reviewed-by: -
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Quick 4.15 misc pull for the build fix: Cross-subsystem Changes: - piles an piles of misc/trivial patches all over, some more from outreachy applicants Core Changes: - build fix for the bridge/of cleanup (Maarten) - fix vblank count in arm_vblank_event (Ville) - some kerneldoc typo fixes from Thierry Driver Changes: - vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt) - sun4i: small cleanups and improved code comments all over (Chen-Yu Tsai) * tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits) drm/via: use ARRAY_SIZE drm/gma500: use ARRAY_SIZE drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits drm/sun4i: backend: Add comment explaining why registers are cleared drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory drm/sun4i: backend: Create regmap after access is possible drm/sun4i: don't add components that are already in the queue drm/vc4: Fix pitch setup for T-format scanout. drm/vc4: Move the DSI clock divider workaround closer to the clock call. drm: Replace kzalloc with kcalloc drm/tinydrm: Remove explicit .best_encoder assignment drm/tinydrm: Replace dev_error with DRM_DEV_ERROR drm/drm_of: Move drm_of_panel_bridge_remove_function into header. drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event() drm/atomic-helper: Fix typo drm: Add missing __user annotation to drm_syncobj_array_find() drm/rockchip: add PINCTRL dependency for LVDS drm/kirin: Checking for IS_ERR() instead of NULL driver:gpu: return -ENOMEM on allocation failure. ...
-
- 16 Oct, 2017 8 commits
-
-
Jérémy Lefaure authored
Using the ARRAY_SIZE macro improves the readability of the code. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171016023357.20174-1-jeremy.lefaure@lse.epita.fr
-
Jérémy Lefaure authored
Using the ARRAY_SIZE macro improves the readability of the code. Also, it is useless to re-invent it. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Reviewed-by:
-
Chen-Yu Tsai authored
Initially we configured the PAD_CTRL1 register at probe/bind time. However it seems the HDMI controller will modify some of the bits in this register by itself. On the A10 it is particularly annoying as it toggles the output invert bits, which inverts the colors on the display output. The U-boot driver this driver is based on sets this register twice, though it seems it's only needed for actual display output. Hence we move it to the mode_set function. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org
-
Chen-Yu Tsai authored
While debugging inverted color from the HDMI output on the A10, I found that the lowest 3 bits were set. These were cleared on A20 boards that had normal display output. By manually toggling these bits the mapping of the color components to these bits was found. While these are not used anywhere, it would be nice to document them somewhere. Signed-off-by:
-
Chen-Yu Tsai authored
Many of the backend's layer configuration registers have undefined default values. This poses a risk as we use regmap_update_bits in some places, and don't overwrite the whole register. At probe/bind time we explicitly clear all the control registers by writing 0 to them. This patch adds a more detailed explanation on why we're doing this. Signed-off-by:
-
Chen-Yu Tsai authored
Commit 4636ce93 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()") adds a new helper, which covers fetching a drm_framebuffer's GEM object and calculating the buffer address for a given plane. This patch uses this helper to replace our own open coded version of the same function. Signed-off-by:
-
Chen-Yu Tsai authored
The backend has various clocks and reset controls that need to be enabled and deasserted before register access is possible. Move the creation of the regmap to after the clocks and reset controls have been configured where it makes more sense. Signed-off-by:
-
Chen-Yu Tsai authored
Even though the components framework can handle duplicate entries, the extra entries cause a lot more debug messages to be generated, which would be confusing to developers not familiar with our driver and the framework in general. Instead, we can scan the relatively small queue and check if the component to be added is already queued up. Since the display pipelines are symmetrical (not considering the third display pipeline on the A80), and we add components level by level, when we get to the second instance at the same level, any shared downstream components would already be in the queue. Signed-off-by:
-
- 13 Oct, 2017 8 commits
-
-
Eric Anholt authored
The documentation said to use src_w here, and I didn't consider that we actually needed to be using pitch somewhere in our setup. Fixes scanout on my DSI panel when X11 does initial setup with 1920x1080 HDMI and 800x480 DSI both at 0,0 of the same framebuffer. v2: Add some comments requested by Boris Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 98830d91 ("drm/vc4: Add T-format scanout support.") Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.netReviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Most notable addition this time is the support for the GPU performance counters by Christian. This has been in the making for some time and it has matured a lot. Since this is adding UAPI, the corresponding WIP userspace can be found at [1] mesa/libdrm repos. I expect that Christian sends out the final userspace patches for this once you have pulled the kernel bits. Philipp optimized the probe path, so etnaviv gets out of the way for systems that want to boot real quick. I've done mostly cleanups, disentangling etnaviv from the IOMMU API, with some MMUv1 optimizations on the way. * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits) drm/etnaviv: remove unnecessary clock stabilization delay drm/etnaviv: reduce reset delay drm/etnaviv: remove unused function etnaviv_gem_new drm/etnaviv: remove stale comment drm/etnaviv: submit supports performance monitor requests drm/etnaviv: enable debug registers on demand drm/etnaviv: need to disable clock gating when doing profiling drm/etnaviv: add MC perf domain drm/etnaviv: add TX perf domain drm/etnaviv: add RA perf domain drm/etnaviv: add SE perf domain drm/etnaviv: add PA perf domain drm/etnaviv: add SH perf domain drm/etnaviv: add PE perf domain drm/etnaviv: add HI perf domain drm/etnaviv: use 'sync points' for performance monitor requests drm/etnaviv: clear alloced event drm/etnaviv: add 'sync point' support drm/etnaviv: add performance monitor request processing drm/etnaviv: copy pmrs from userspace ...
-
Eric Anholt authored
We want the adjusted_mode->clock to be the actual clock we're expecting to program, so that consumers see the right values for clock and vrefresh. Signed-off-by:
-
Harsha Sharma authored
Prefer kcalloc over kzalloc to allocate an array. This patch fixes checkcpatch issue. Signed-off-by:
Harsha Sharma <harshasharmaiitr@gmail.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com
-
Haneen Mohammed authored
Since the driver is relying on the atomic helpers, remove the explicit .best_encoder assignment and let the core call drm_atomic_helper_best_encoder(). Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen
-
Harsha Sharma authored
Convert instances of dev_error to DRM_DEV_ERROR as we have DRM_DEV_ERROR variants of drm print macros. Signed-off-by:
-
Maarten Lankhorst authored
Core drm shouldn't depend on anything in drm-kms-helper, or the drm module will fail to load. insmod drm fails with [ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0) which is defined in drm_kms_helper.ko This call was added by commit c70087e8 ("drm/drm_of: add drm_of_panel_bridge_remove function"), and the fix is defining it in the drm_of.h header, to break the circular dependency. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org>
-
Thierry Reding authored
Fix up this reference so that the proper link is generated in the documentation and so that people don't go chasing after the wrong function for an embarrassingly long time. Acked-by:
-
