- 10 Nov, 2018 5 commits
-
-
Bob Copeland authored
[ Upstream commit 6eae4a6c ] In our environment running lots of mesh nodes, we are seeing the pending queue hang periodically, with the debugfs queues file showing lines such as: 00: 0x00000000/348 i.e. there are a large number of frames but no stop reason set. One way this could happen is if queue processing from the pending tasklet exited early without processing all frames, and without having some future event (incoming frame, stop reason flag, ...) to reschedule it. Exactly this can occur today if ieee80211_tx() returns false due to packet drops or power-save buffering in the tx handlers. In the past, this function would return true in such cases, and the change to false doesn't seem to be intentional. Fix this case by reverting to the previous behavior. Fixes: bb42f2d1 ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by:
Bob Copeland <bobcopeland@fb.com> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andrei Otcheretianski authored
[ Upstream commit 24f33e64 ] Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since the regulatory request is zeroed, wiphy_idx was always implicitly set to 0. This resulted in updating only phy #0. Fix that. Fixes: 806a9e39 ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy") Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> [add fixes tag] Signed-off-by:
-
Andrei Otcheretianski authored
[ Upstream commit 8682250b ] If a frame is dropped for any reason, mac80211 wouldn't report the TX status back to user space. As the user space may rely on the TX_STATUS to kick its state machines, resends etc, it's better to just report this frame as not acked instead. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit 215ab0f0 ] After commit d6990976 ("vti6: fix PMTU caching and reporting on xmit"), some too big skbs might be potentially passed down to __xfrm6_output, causing it to fail to transmit but not free the skb, causing a leak of skb, and consequentially a leak of dst references. After running pmtu.sh, that shows as failure to unregister devices in a namespace: [ 311.397671] unregister_netdevice: waiting for veth_b to become free. Usage count = 1 The fix is to call kfree_skb in case of transmit failures. Fixes: dd767856 ("xfrm6: Don't call icmpv6_send on local error") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 07bf7908 ] We don't validate the address prefix lengths in the xfrm selector we got from userspace. This can lead to undefined behaviour in the address matching functions if the prefix is too big for the given address family. Fix this by checking the prefixes and refuse SA/policy insertation when a prefix is invalid. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Air Icy <icytxw@gmail.com> Signed-off-by:
-
- 20 Oct, 2018 35 commits
-
-
Greg Kroah-Hartman authored
-
Long Li authored
commit a3ade8cc upstream. The host may send multiple negotiation packets (due to timeout) before the KVP user-mode daemon is connected. KVP user-mode daemon is connected. We need to defer processing those packets until the daemon is negotiated and connected. It's okay for guest to respond to all negotiation packets. In addition, the host may send multiple staged KVP requests as soon as negotiation is done. We need to properly process those packets using one tasklet for exclusive access to ring buffer. This patch is based on the work of Nick Meier <Nick.Meier@microsoft.com>. The above is the original changelog of a3ade8cc ("HV: properly delay KVP packets when negotiation is in progress" Here I re-worked the original patch because the mainline version can't work for the linux-4.4.y branch, on which channel->callback_event doesn't exist yet. In the mainline, channel->callback_event was added by: 631e63a9 ("vmbus: change to per channel tasklet"). Here we don't want to backport it to v4.4, as it requires extra supporting changes and fixes, which are unnecessary as to the KVP bug we're trying to resolve. NOTE: before this patch is used, we should cherry-pick the other related 3 patches from the mainline first: The background of this backport request is that: recently Wang Jian reported some KVP issues: https://github.com/LIS/lis-next/issues/593: e.g. the /var/lib/hyperv/.kvp_pool_* files can not be updated, and sometimes if the hv_kvp_daemon doesn't timely start, the host may not be able to query the VM's IP address via KVP. Reported-by:
Wang Jian <jianjian.wang1@gmail.com> Tested-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 8bc1379b upstream. Use a separate journal transaction if it turns out that we need to convert an inline file to use an data block. Otherwise we could end up failing due to not having journal credits. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org [fengc@google.com: 4.4 and 4.9 backport: adjust context] Signed-off-by:
Chenbo Feng <fengc@google.com> Signed-off-by:
-
Frederic Weisbecker authored
commit 25e2d8c1 upstream. irq_time_read() returns the irqtime minus the ksoftirqd time. This is necessary because irq_time_read() is used to substract the IRQ time from the sum_exec_runtime of a task. If we were to include the softirq time of ksoftirqd, this task would substract its own CPU time everytime it updates ksoftirqd->sum_exec_runtime which would therefore never progress. But this behaviour got broken by: a499a5a1 ("sched/cputime: Increment kcpustat directly on irqtime account") ... which now includes ksoftirqd softirq time in the time returned by irq_time_read(). This has resulted in wrong ksoftirqd cputime reported to userspace through /proc/stat and thus "top" not showing ksoftirqd when it should after intense networking load. ksoftirqd->stime happens to be correct but it gets scaled down by sum_exec_runtime through task_cputime_adjusted(). To fix this, just account the strict IRQ time in a separate counter and use it to report the IRQ time. Reported-and-tested-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Ivan Delalande <colona@arista.com> Signed-off-by:
-
Frederic Weisbecker authored
commit a499a5a1 upstream. The irqtime is accounted is nsecs and stored in cpu_irq_time.hardirq_time and cpu_irq_time.softirq_time. Once the accumulated amount reaches a new jiffy, this one gets accounted to the kcpustat. This was necessary when kcpustat was stored in cputime_t, which could at worst have jiffies granularity. But now kcpustat is stored in nsecs so this whole discretization game with temporary irqtime storage has become unnecessary. We can now directly account the irqtime to the kcpustat. Signed-off-by:
-
Frederic Weisbecker authored
commit 564b733c upstream. cputime_t is going to be removed and replaced by nsecs units, so convert the drivers/macintosh/rack-meter.c use to u64.. Signed-off-by:
-
Frederic Weisbecker authored
commit 7fb1327e upstream. Kernel CPU stats are stored in cputime_t which is an architecture defined type, and hence a bit opaque and requiring accessors and mutators for any operation. Converting them to nsecs simplifies the code and is one step toward the removal of cputime_t in the core code. Signed-off-by:
-
Stephen Warren authored
commit daa35bd9 upstream. When the gadget serial device has no associated TTY, do not pass any received data into the TTY layer for processing; simply drop it instead. This prevents the TTY layer from calling back into the gadget serial driver, which will then crash in e.g. gs_write_room() due to lack of gadget serial device to TTY association (i.e. a NULL pointer dereference). Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Natanael Copa authored
Commit b6cc0ba2 (HID: add support for Apple Magic Keyboards) backported support for the Magic Keyboard over Bluetooth, but did not add the BT_VENDOR_ID_APPLE to hid_have_special_driver[] so the hid-apple driver is never loaded and Fn key does not work at all. Adding BT_VENDOR_ID_APPLE to hid_have_special_driver[] is not needed after commit e04a0442 (HID: core: remove the absolute need of hid_have_special_driver[]), so 4.16 kernels and newer does not need it. Fixes: b6cc0ba2 (HID: add support for Apple Magic Keyboards) Bugzilla-id: https://bugzilla.kernel.org/show_bug.cgi?id=99881Signed-off-by:
Natanael Copa <ncopa@alpinelinux.org> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Alexey Brodkin authored
commit 40660f1f upstream. There's not much sense in doing that because if user or his build-system didn't set CROSS_COMPILE we still may very well make incorrect guess. But as it turned out setting CROSS_COMPILE is not as harmless as one may think: with recent changes that implemented automatic discovery of __host__ gcc features unconditional setup of CROSS_COMPILE leads to failures on execution of "make xxx_defconfig" with absent cross-compiler, for more info see [1]. Set CROSS_COMPILE as well gets in the way if we want only to build .dtb's (again with absent cross-compiler which is not really needed for building .dtb's), see [2]. Note, we had to change LIBGCC assignment type from ":=" to "=" so that is is resolved on its usage, otherwise if it is resolved at declaration time with missing CROSS_COMPILE we're getting this error message from host GCC: | gcc: error: unrecognized command line option -mmedium-calls | gcc: error: unrecognized command line option -mno-sdata [1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-September/004308.html [2] http://lists.infradead.org/pipermail/linux-snps-arc/2018-September/004320.htmlSigned-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
commit 615f6445 upstream. This check is very naive: we simply test if GCC invoked without "-mcpu=XXX" has ARC700 define set. In that case we think that GCC was built with "--with-cpu=arc700" and has libgcc built for ARC700. Otherwise if ARC700 is not defined we think that everythng was built for ARCv2. But in reality our life is much more interesting. 1. Regardless of GCC configuration (i.e. what we pass in "--with-cpu" it may generate code for any ARC core). 2. libgcc might be built with explicitly specified "--mcpu=YYY" That's exactly what happens in case of multilibbed toolchains: - GCC is configured with default settings - All the libs built for many different CPU flavors I.e. that check gets in the way of usage of multilibbed toolchains. And even non-multilibbed toolchains are affected. OpenEmbedded also builds GCC without "--with-cpu" because each and every target component later is compiled with explicitly set "-mcpu=ZZZ". Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Xin Long authored
commit ab6dd1be upstream. Commit 4440a2ab ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions") wanted to drop the packet when it fails to add seqadj ext due to no memory by checking if nfct_seqadj_ext_add returns NULL. But that nfct_seqadj_ext_add returns NULL can also happen when seqadj ext already exists in a nf_conn. It will cause that userspace protocol doesn't work when both dnat and snat are configured. Li Shuang found this issue in the case: Topo: ftp client router ftp server 10.167.131.2 <-> 10.167.131.254 10.167.141.254 <-> 10.167.141.1 Rules: # iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 21 -j \ DNAT --to-destination 10.167.141.1 # iptables -t nat -A POSTROUTING -o eth2 -p tcp -m tcp --dport 21 -j \ SNAT --to-source 10.167.141.254 In router, when both dnat and snat are added, nf_nat_setup_info will be called twice. The packet can be dropped at the 2nd time for DNAT due to seqadj ext is already added at the 1st time for SNAT. This patch is to fix it by checking for seqadj ext existence before adding it, so that the packet will not be dropped if seqadj ext already exists. Note that as Florian mentioned, as a long term, we should review ext_add() behaviour, it's better to return a pointer to the existing ext instead. Fixes: 4440a2ab ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions") Reported-by:
Li Shuang <shuali@redhat.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jan Kara authored
commit 4628a645 upstream. Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a result we will see warnings such as: BUG: Bad page map in process JobWrk0013 pte:800001803875ea25 pmd:7624381067 addr:00007f0930720000 vm_flags:280000f9 anon_vma: (null) mapping:ffff97f2384056f0 index:0 file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage: (null) CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G W 4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased) Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 Call Trace: dump_stack+0x5a/0x75 print_bad_pte+0x217/0x2c0 ? enqueue_task_fair+0x76/0x9f0 _vm_normal_page+0xe5/0x100 zap_pte_range+0x148/0x740 unmap_page_range+0x39a/0x4b0 unmap_vmas+0x42/0x90 unmap_region+0x99/0xf0 ? vma_gap_callbacks_rotate+0x1a/0x20 do_munmap+0x255/0x3a0 vm_munmap+0x54/0x80 SyS_munmap+0x1d/0x30 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ... when mprotect(2) gets used on DAX mappings. Also there is a wide variety of other failures that can result from the missing _PAGE_DEVMAP flag when the area gets used by get_user_pages() later. Fix the problem by including _PAGE_DEVMAP in a set of flags that get preserved by mprotect(2). Fixes: 69660fd7 ("x86, mm: introduce _PAGE_DEVMAP") Fixes: ebd31197 ("powerpc/mm: Add devmap support for ppc64") Cc: <stable@vger.kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Linus Torvalds authored
commit eb66ae03 upstream. Jann Horn points out that our TLB flushing was subtly wrong for the mremap() case. What makes mremap() special is that we don't follow the usual "add page to list of pages to be freed, then flush tlb, and then free pages". No, mremap() obviously just _moves_ the page from one page table location to another. That matters, because mremap() thus doesn't directly control the lifetime of the moved page with a freelist: instead, the lifetime of the page is controlled by the page table locking, that serializes access to the entry. As a result, we need to flush the TLB not just before releasing the lock for the source location (to avoid any concurrent accesses to the entry), but also before we release the destination page table lock (to avoid the TLB being flushed after somebody else has already done something to that page). This also makes the whole "need_flush" logic unnecessary, since we now always end up flushing the TLB for every valid entry. Reported-and-tested-by:
Jann Horn <jannh@google.com> Acked-by:
Will Deacon <will.deacon@arm.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arindam Nath authored
[ Upstream commit 5ebb1bc2 ] ACPI HID devices do not actually have an alias for them in the IVRS. But dev_data->alias is still used for indexing into the IOMMU device table for devices being handled by the IOMMU. So for ACPI HID devices, we simply return the corresponding devid as an alias, as parsed from IVRS table. Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Fixes: 2bf9a0a1 ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Michael Neuling authored
[ Upstream commit 96dc89d5 ] Current we store the userspace r1 to PACATMSCRATCH before finally saving it to the thread struct. In theory an exception could be taken here (like a machine check or SLB miss) that could write PACATMSCRATCH and hence corrupt the userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but others do. We've never actually seen this happen but it's theoretically possible. Either way, the code is fragile as it is. This patch saves r1 to the kernel stack (which can't fault) before we turn MSR[RI] back on. PACATMSCRATCH is still used but only with MSR[RI] off. We then copy r1 from the kernel stack to the thread struct once we have MSR[RI] back on. Suggested-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
[ Upstream commit cf13435b ] When we treclaim we store the userspace checkpointed r13 to a scratch SPR and then later save the scratch SPR to the user thread struct. Unfortunately, this doesn't work as accessing the user thread struct can take an SLB fault and the SLB fault handler will write the same scratch SPRG that now contains the userspace r13. To fix this, we store r13 to the kernel stack (which can't fault) before we access the user thread struct. Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen as a random userspace segfault with r13 looking like a kernel address. Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 8ac1ee6f ] Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit f1f1fada ] When sd_init_command() get's a command with a unknown req_op() it crashes the system via BUG(). This makes debugging the actual reason for the broken request cmd_flags pretty hard as the system is down before it's able to write out debugging data on the serial console or the trace buffer. Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and return an I/O error to the producer of the request. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alexandru Gheorghe authored
[ Upstream commit 69be1984 ] Currently, if userspace calls drm_wait_vblank before the crtc is activated the crtc vblank_enable hook is called, which in case of malidp driver triggers some warninngs. This happens because on device init we don't inform the drm core about the vblank state by calling drm_crtc_vblank_on/off/reset which together with drm_vblank_get have some magic that prevents calling drm_vblank_enable when crtc is off. Signed-off-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Kazuya Mizuguchi authored
[ Upstream commit 2fe397a3 ] EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Michael Schmitz authored
[ Upstream commit 52d2c7bf ] The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes. Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key. Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Andreas Schwab authored
[ Upstream commit 9e62df51 ] Fix errors in Atari keymap (mostly in keypad, help and undo keys). Patch provided on debian-68k ML by Andreas Schwab <schwab@linux-m68k.org>, keymap array size and unhandled scancode limit adjusted to 0x73 by me. Tested-by:
-
Laura Abbott authored
[ Upstream commit adad633a ] While reviewing another part of the code, Kees noticed that the strncpy of the partition name might not always be NUL terminated. Switch to using strscpy which does this safely. Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
-
Laura Abbott authored
[ Upstream commit d792d4c4 ] There's currently a warning about string overflow with strncat: drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_probe': drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3479:2: error: 'strncat' specified bound 64 equals destination size [-Werror=stringop-overflow=] strncat(vscsi->eye, vdev->name, MAX_EYE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Switch to a single snprintf instead of a strcpy + strcat to handle this cleanly. Signed-off-by:
-
Keerthy authored
[ Upstream commit 3b7d96a0 ] The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs. Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Marek Lindner authored
[ Upstream commit 4c4af690 ] The hardif_neigh refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Marek Lindner authored
[ Upstream commit 5af96b9c ] The backbone_gw refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit ae3cdc97 ] The function batadv_tvlv_handler_register is responsible for adding new tvlv_handler to the handler_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: ef261577 ("batman-adv: tvlv - basic infrastructure") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit e7136e48 ] The function batadv_tt_global_orig_entry_add is responsible for adding new tt_orig_list_entry to the orig_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d657e621 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 94cb82f5 ] The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b2 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit fa122fec ] The function batadv_nc_get_nc_node is responsible for adding new nc_nodes to the in_coding_list and out_coding_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d56b1705 ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit a25bab9d ] The per hardif sysfs file "batman_adv/elp_interval" is using the generic functions to store/show uint values. The helper __batadv_store_uint_attr requires the softif net_device as parameter to print the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0744ff8f ("batman-adv: Add hard_iface specific sysfs wrapper macros for UINT") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit b9fd14c2 ] The per hardif sysfs file "batman_adv/throughput_override" prints the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
Jozef Balga authored
[ Upstream commit 312f73b6 ] When less than 3 bytes are written to the device, memcpy is called with negative array size which leads to buffer overflow and kernel panic. This patch adds a condition and returns -EOPNOTSUPP instead. Fixes bugzilla issue 64871 [mchehab+samsung@kernel.org: fix a merge conflict and changed the condition to match the patch's comment, e. g. len == 3 could also be valid] Signed-off-by:
Jozef Balga <jozef.balga@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
