- 01 Jun, 2024 21 commits
-
-
Matteo Croce authored
The following sysctl are global and can't be read from a netns: net.core.rmem_default net.core.rmem_max net.core.wmem_default net.core.wmem_max Make the following sysctl parameters available readonly from within a network namespace, allowing a container to read them. Signed-off-by:
Matteo Croce <teknoraver@meta.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Shakeel Butt <shakeel.butt@linux.dev> Link: https://lore.kernel.org/r/20240530232722.45255-2-technoboy85@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vadim Fedorenko authored
The ethtool_ts_stats structure was introduced earlier this year. Now it's time to support this group of counters in more drivers. This patch adds support to bnxt driver. Signed-off-by:
Vadim Fedorenko <vadfed@meta.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240530204751.99636-1-vadfed@meta.comSigned-off-by:
-
Jakub Kicinski authored
Jacob Keller says: ==================== ice: Introduce ETH56G PHY model for E825C products E825C products have a different PHY model than E822, E823 and E810 products. This PHY is ETH56G and its support is necessary to have functional PTP stack for E825C products. This series refactors the ice driver to add support for the new PHY model. Karol introduces the ice_ptp_hw structure. This is used to replace some hard-coded values relating to the PHY quad and port numbers, as well as to hold the phy_model type. Jacob refactors the driver code that converts between the ice_ptp_tmr_cmd enumeration and hardware register values to better re-use logic and reduce duplication when introducing another PHY type. Sergey introduces functions to help enable and disable the Tx timestamp interrupts. This makes the ice_ptp.c code more generic and encapsulates the PHY specifics into ice_ptp_hw.c Karol introduces helper functions to clear the valid bits for Tx and Rx timestamps. This enables informing hardware to discard stale timestamps after performing clock operations. Sergey moves the Clock Generation Unit (CGU) logic out of the E822 specific area of the ice_ptp_hw.c file as it will be re-used for other device PHY models. Jacob introduces a helper function for obtaining the base increment values, moving this logic out of ice_ptp.c and into the ice_ptp_hw.c file to better encapsulate hardware differences. Sergey builds on these refactors to introduce the new ETH56G PHY model used by the E825C products. This includes introducing the required helpers, constants, and PHY model checks. Karol simplifies the CGU logic by using anonymous structures, dropping an unnecessary ".field" name for accessing the CGU data. Michal Michalik updates the CGU logic to support the E825C hardware, ensuring that the clock generation is configured properly. Grzegorz Nitka adds support to read the NAC topology data from the device. This is in preparation for supporting devices which combine two NACs together, connecting all ports to the same clock source. This enables the driver to determine if its operating on such a device, or if its operating on the standard 1-NAC configuration. Grzsecgorz Nitka adjusts the PTP initialization to prepare for the 2x50G E825C devices, introducing special mapping for the PHY ports to prepare for support of the 2-NAC devices. With this, the ice driver is capable of handling PTP for the single-NAC E825C devices. Complete support for the 2-NAC devices requirs some work on how the ports connect to the clock owner. During review of this work, it was pointed out that our existing use of auxiliary bus is disliked, and Jiri requested that we change it. We are currently working on developing a replacement solution for the auxiliary bus implementation and have dropped the relevant changes out of this series. A future series will refactor the port to clock connection, at which time we will finish the support for 2-NAC E825C devices. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> ==================== Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-0-c082739bb6f6@intel.comSigned-off-by:
-
Grzegorz Nitka authored
>From FW/HW perspective, 2 port topology in E825C devices requires merging of 2 port mapping internally and breakout mapping externally. As a consequence, it requires different port numbering from PTP code perspective. For that topology, pf_id can not be used to index PTP ports. Even if the 2nd port is identified as port with pf_id = 1, all PHY operations need to be performed as it was port 2. Thus, special mapping is needed for the 2nd port. This change adds detection of 2x50G topology and applies 'custom' mapping on the 2nd port. Signed-off-by:
Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Tested-by:
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by:
-
Grzegorz Nitka authored
Add new device capability ICE_AQC_CAPS_NAC_TOPOLOGY which allows to determine the mode of operation (1 or 2 NAC). Define a new structure to store data from new capability and corresponding parser code. Co-developed-by:
Prathisna Padmasanan <prathisna.padmasanan@intel.com> Signed-off-by:
Pawel Kaminski <pawel.kaminski@intel.com> Reviewed-by:
Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
-
Michal Michalik authored
The CGU layout of E825-C is a little different than E822/E823. Add support the new hardware adding relevant functions. Signed-off-by:
Michal Michalik <michal.michalik@intel.com> Reviewed-by:
-
Karol Kolacinski authored
Simplify the code by using anonymous struct in CGU registers instead of naming each structure 'field'. Suggested-by:
-
Sergey Temerkhanov authored
E825C products feature a new PHY model - ETH56G. Introduces all necessary PHY definitions, functions etc. for ETH56G PHY, analogous to E82X and E810 ones with addition of a few HW-specific functionalities for ETH56G like one-step timestamping. It ensures correct PTP initialization and operation for E825C products. Co-developed-by:
Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by:
-
Jacob Keller authored
Add a new helper for getting base clock increment value for specific HW. Reviewed-by:
-
Sergey Temerkhanov authored
Move CGU block to the beginning of ice_ptp_hw.c Signed-off-by:
-
Karol Kolacinski authored
Add a possibility to mark all transmitted/received timestamps as invalid by clearing PHY OFFSET_READY registers. Reviewed-by:
-
Sergey Temerkhanov authored
Introduce functions enabling/disabling Tx TS interrupts for the E822 and ETH56G PHYs Signed-off-by:
-
Jacob Keller authored
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd values into register bits for both the main timer and the PHY port timers. The main MAC register has one bit scheme for timer commands, while the PHY commands use a different scheme. The E810 and E830 devices use the same scheme for port commands as used for the main timer. However, E822 and ETH56G hardware has a separate scheme used by the PHY. Introduce helper functions to convert the timer command enumeration into the register values, reducing some code duplication, and making it easier to later refactor the individual port write commands. Reviewed-by:
-
Karol Kolacinski authored
Create new ice_ptp_hw struct and use it for all HW and PTP-related fields from struct ice_hw. Replace definitions with struct fields, which values are set accordingly to a specific device. Reviewed-by:
-
Abhishek Chauhan authored
Currently there are no strict checks while setting SO_TXTIME from userspace. With the recent development in skb->tstamp_type clockid with unsupported clocks results in warn_on_once, which causes unnecessary aborts in some systems which enables panic on warns. Add validation in setsockopt to support only CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_TAI to be set from userspace. Link: https://lore.kernel.org/netdev/bc037db4-58bb-4861-ac31-a361a93841d3@linux.dev/ Link: https://lore.kernel.org/lkml/6bdba7b6-fd22-4ea5-a356-12268674def1@quicinc.com/ Fixes: 1693c5db ("net: Add additional bit to support clockid_t timestamp type") Reported-by: syzbot+d7b227731ec589e7f4f0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7b227731ec589e7f4f0 Reported-by: syzbot+30a35a2e9c5067cc43fa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=30a35a2e9c5067cc43faSigned-off-by:
Abhishek Chauhan <quic_abchauha@quicinc.com> Acked-by:
Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240529183130.1717083-1-quic_abchauha@quicinc.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== doc: mptcp: new general doc and fixes A general documentation about MPTCP was missing since its introduction in v5.6. The last patch adds a new 'mptcp' page in the 'networking' documentation. The first patch is a fix for a missing sysctl entry introduced in v6.10 rc0, and the second one reorder the sysctl entries. Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> ==================== v2: https://lore.kernel.org/r/20240528-upstream-net-20240520-mptcp-doc-v2-0-47f2d5bc2ef3@kernel.org v1: https://lore.kernel.org/r/20240520-upstream-net-20240520-mptcp-doc-v1-0-e3ad294382cb@kernel.org Link: https://lore.kernel.org/r/20240530-upstream-net-20240520-mptcp-doc-v3-0-e94cdd9f2673@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
A general documentation about MPTCP was missing since its introduction in v5.6. Most of what is there comes from our recently updated mptcp.dev website, with additional links to resources from the kernel documentation. This is a first version, mainly targeting app developers and users. Link: https://www.mptcp.devReviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
Similar to what is done in other 'sysctl' pages: it looks clearer from a readability perspective. This might cause troubles in the short/mid-term with the backports, but by not putting new entries at the end, this can help to reduce conflicts in case of backports in the long term. We don't change the information here too often, so it looks OK to do that. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This sysctl knob has been added recently, but the documentation has not been updated. This knob is used to show the available schedulers choices that are registered, similar to 'net.ipv4.tcp_available_congestion_control'. Fixes: 73c900aa ("mptcp: add net.mptcp.available_schedulers") Reviewed-by:
-
Thorsten Blum authored
Use void __iomem pointers as parameters for mcf_insw() and mcf_outsw() to align with the parameter types of readw() and writew() to fix the following warnings reported by kernel test robot: drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: expected void *a drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: got void [noderef] __iomem * drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: expected void *a drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: got void [noderef] __iomem * drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: expected void *a drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: got void [noderef] __iomem * drivers/net/ethernet/smsc/smc91x.c:483:17: sparse: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/smsc/smc91x.c:483:17: sparse: expected void *a drivers/net/ethernet/smsc/smc91x.c:483:17: sparse: got void [noderef] __iomem * Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405160853.3qyaSj8w-lkp@intel.com/Acked-by:
Nicolas Pitre <nico@fluxnic.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Thorsten Blum <thorsten.blum@toblux.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240529143859.108201-4-thorsten.blum@toblux.comSigned-off-by:
-
Jakub Kicinski authored
mlx5 has a dedicated queue for PTP packets. Clarify that this sort of queues can also be accounted towards the base. Reviewed-by:
Joe Damato <jdamato@fastly.com> Link: https://lore.kernel.org/r/20240529162922.3690698-1-kuba@kernel.orgSigned-off-by:
-
- 31 May, 2024 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_classifier.c abd5576b ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") 56a5cf53 ("net: ti: icssg-prueth: Fix start counter for ft1 filter") https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/ No other adjacent changes. Signed-off-by:
-
Jakub Kicinski authored
Folks working on a C++ codegen would like to reuse the attribute helpers directly. Add the few necessary casts, it's not too ugly. Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20240529192031.3785761-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== net: phylink: rearrange ovr_an_inband support This series addresses the use of the ovr_an_inband flag, which is used by two drivers to indicate to phylink that they wish to use inband mode without firmware specifying inband mode. The issue with ovr_an_inband is that it overrides not only PHY mode, but also fixed-link mode. Both of the drivers that set this flag contain code to detect when fixed-link mode will be used, and then either avoid setting it or explicitly clear the flag. This is wasteful when phylink already knows this. Therefore, the approach taken in this patch set is to replace the ovr_an_inband flag with a default_an_inband flag which means that phylink defaults to MLO_AN_INBAND instead of MLO_AN_PHY, and will allow that default to be overriden if firmware specifies a fixed-link. This allows users of ovr_an_inband to be simplified. What's more is this requires minimal changes in phylink to allow this new mode of operation. This series changes phylink, and also updates the two drivers (fman_memac and stmmac), and then removes the unnecessary complexity from the drivers. This series may depend on the stmmac cleanup series I've posted earlier - this is something I have not checked, but I currently have these patches on top of that series. ==================== Link: https://lore.kernel.org/r/ZlctinnTT8Xhemsm@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
With the new default_an_inband functionality in phylink, there is no need to check for a fixed link when this flag is set, since a fixed link will now override default_an_inband. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/E1sCJNB-00EcrJ-7L@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Rename xpcs_an_inband to default_an_inband to reflect the change in phylink and its changed functionality. Signed-off-by:
-
Russell King (Oracle) authored
Since default_an_inband can be overriden by a fixed-link specification, there is no need for memac to be checking for this before setting default_an_inband. Remove this code and update the comment. Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Reviewed-by:
-
Russell King (Oracle) authored
Since ovr_an_inband no longer overrides every MLO_AN_xxx mode, rename it to reflect what it now does - it changes the default mode from MLO_AN_PHY to MLO_AN_INBAND. Fix up the two users of this. Signed-off-by:
-
Russell King (Oracle) authored
Of the two users of phylink_config->ovr_an_inband, both manually check for a fixed link before setting this flag (or clearing it if they find a fixed link.) This is unnecessary complication. Test ovr_an_inband before checking for the fixed-link properties, which will allow ovr_an_inband to be overriden by a fixed link specification. Signed-off-by:
-
Russell King (Oracle) authored
Of the two users of phylink_config->ovr_an_inband, both manually check for a fixed link before setting this flag (or clearing it if they find a fixed link.) This is unnecessary complication. Rearrange phylink_parse_mode() a little so we can change how phylink_config->ovr_an_inband works. This will allow the flag to be tested before checking for the fixed link properties in the next patch. Signed-off-by:
-
MD Danish Anwar authored
Add documentation for ti,pa-stats property which is syscon regmap for PA_STATS registers. This will be used to dump statistics maintained by ICSSG firmware. Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240529115225.630535-1-danishanwar@ti.comSigned-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== net: stmmac: cleanups This series removes various redundant items in the stmmac driver: - the unused TBI and RTBI PCS flags - the NULL pointer initialisations for PCS methods in dwxgmac2 - the stmmac_pcs_rane() method which is never called, and it's associated implementations - the redundant netif_carrier_off()s Finally, it replaces asm/io.h with the preferred linux/io.h. ==================== Link: https://lore.kernel.org/r/Zlbp7xdUZAXblOZJ@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
There are four repititions of the same sequence of code, three of which are identical. Pull these out into a separate function to improve readability. Signed-off-by:
Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1sCErj-00EOQ9-Vh@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Include linux/io.h instead of asm/io.h since linux/ includes are preferred. Reviewed-by:
-
Russell King (Oracle) authored
It is incorrect to call netif_carrier_off(), or in fact any driver teardown, before unregister_netdev() has been called. unregister_netdev() unpublishes the network device from userspace, and takes the interface down if it was up prior to returning. Therefore, once the call has returned, we are guaranteed that .ndo_stop() will have been called for an interface that was up. Phylink will take the carrier down via phylink_stop(), making any manipulation of the carrier in the remove path unnecessary. In the stmmac_release() path, the netif_carrier_off() call follows the call to phylink_stop(), so this call is redundant. Reviewed-by:
-
Russell King (Oracle) authored
The pcs_rane() method is not called, so lets just remove this redundant code. Reviewed-by:
-
Russell King (Oracle) authored
Remove useless NULL pointer initialisations for "PCS" methods from the dwxgmac2 code. Reviewed-by:
-
Serge Semin authored
First of all the flags are never set by any of the driver parts. If nobody have them set then the respective statements will always have the same result. Thus the statements can be simplified or even dropped with no risk to break things. Secondly shall any of the TBI or RTBI flag is set the MDIO-bus registration will be bypassed. Why? It really seems weird. It's perfectly fine to have a TBI/RTBI-capable PHY configured over the MDIO bus interface. Based on the notes above the TBI/RTBI PCS flags can be freely dropped thus simplifying the driver code. Reviewed-by:
-
Hangbin Liu authored
There are too many ifdef in IPv6 segment routing code that may cause logic problems. like commit 160e9d27 ("ipv6: sr: fix invalid unregister error path"). To avoid this, the init functions are redefined for both cases. The code could be more clear after all fidefs are removed. Suggested-by:
Simon Horman <horms@kernel.org> Suggested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
-
Jakub Kicinski authored
A comment in define_trace.h clearly states: TRACE_INCLUDE_PATH if the path is something other than core kernel vvvvvvvvvvvvvv include/trace then this macro can define the path to use. Note, the path is relative to define_trace.h, not the file including it. Full path names ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ for out of tree modules must be used. fjes uses path relative to itself. Which (somehow) works most of the time. Except when the kernel tree is "nested" in another kernel tree, and ../drivers/net/fjes actually exists. In which case build will use the header file from the wrong directory. I've been trying to figure out why net NIPA builder is constantly failing for the last 5 days, with: include/trace/../../../drivers/net/fjes/fjes_trace.h:88:17: error: ‘__assign_str’ undeclared (first use in this function) 88 | __assign_str(err, err); | ^~~~~~~~~~~~ when the line in the tree clearly has only one "err". NIPA does indeed have "nested" trees, because it uses git work-trees and the tree on the "outside" is not very up to date. Link: https://lore.kernel.org/r/20240529023322.3467755-1-kuba@kernel.orgSigned-off-by:
-
