- 15 Jul, 2024 5 commits
-
-
Katya Orlova authored
ltdc_load() calls functions drm_crtc_init_with_planes(), drm_universal_plane_init() and drm_encoder_init(). These functions should not be called with parameters allocated with devm_kzalloc() to avoid use-after-free issues [1]. Use allocations managed by the DRM framework. Found by Linux Verification Center (linuxtesting.org). [1] https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/Signed-off-by:
Katya Orlova <e.orlova@ispras.ru> Acked-by:
Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240216125040.8968-1-e.orlova@ispras.ruSigned-off-by:
-
Claudiu Beznea authored
devm_kzalloc() can fail and return NULL pointer. Check its return status. Identified with Coccinelle (kmerr.cocci script). Fixes: 484e72d3 ("drm/stm: ltdc: add support of ycbcr pixel formats") Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by:
-
Thomas Zimmermann authored
The BMC's scanout synchronization is only indirectly related to the VIDRST functionality. Do some renaming. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711072415.11831-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
The callbacks disable_vidrst and enable_vidrst are obsolete. Remove the fields from struct mgag200_device_funcs. Instead call their implementations directly of the field 'has_vidrst' has been set in struct mgag200_device_info. Also change the logic slightly. The BMC used to start and stop scanout during the CRTC's atomic_enable and atomic_disable. Plane updates were done while the BMC scanned out the display. Now only stop once in atomic_disable at the beginning of a modeset and then restart the scanout at the end of a modeset in atomic_enable. While the modeset takes place, the BMC does not scanout at all. Signed-off-by:
-
Thomas Zimmermann authored
The VRSTEN and HRSTEN bits control whether a CRTC synchronizes its display signal with an external source on the VIDRST pin. The G200WB and G200EW3 models synchronize with a BMC chip, but different external video encoders, such as the Matrox Maven, can also be attached to the pin. Only set VRSTEN and HRSTEN bits in the CRTC mode-setting code, so the bits are independent from the BMC. Add the field set_vidrst to the CRTC state for this purpose. Off by default, control the CRTC VIDRST setting from the CRTC's atomic_check helper. v3: - don't clear bits unnecessary (Jocelyn) v2: - keep logic entirely in CRTC (Jocelyn) Signed-off-by:
-
- 13 Jul, 2024 12 commits
-
-
Maíra Canal authored
Use the common DRM function `drm_show_memory_stats()` to expose standard fdinfo memory stats. V3D exposes global GPU memory stats through debugfs. Those stats will be preserved while the DRM subsystem doesn't have a standard solution to expose global GPU stats. Signed-off-by:
Maíra Canal <mcanal@igalia.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711142736.783816-1-mcanal@igalia.com
-
Tvrtko Ursulin authored
Add some local variables to make the code a bit less verbose, with the main benefit being pulling some lines to under 80 columns wide. Signed-off-by:
-
Tvrtko Ursulin authored
It makes it just a tiny bit more obvious what is going on. Signed-off-by:
-
Tvrtko Ursulin authored
Now that the build time dependencies on various array sizes have been removed, we can move the perfmon init completely into its own compilation unit and remove the hardcoded defines. This improves on the temporary fix quickly delivered in commit 9c3951ec ("drm/v3d: Fix perfmon build error/warning"). Signed-off-by:
-
Tvrtko Ursulin authored
Removing the intermediate buffer removes the last use of the V3D_MAX_COUNTERS define, which will enable further driver cleanup. While at it pull the 32 vs 64 bit copying decision outside the loop in order to reduce the number of conditional instructions. Signed-off-by:
Iago Toral Quiroga <itoral@igalia.com> Reviewed-by:
-
Tvrtko Ursulin authored
Instead of statically reserving pessimistic space for the kperfmon_ids array, make the userspace extension code allocate the exactly required amount of space. Apart from saving some memory at runtime, this also removes the need for the V3D_MAX_PERFMONS macro whose removal will benefit further driver cleanup. Signed-off-by:
-
Tvrtko Ursulin authored
The loop which looks up the syncobj and copies the kperfmon ids is identical so lets move it to a helper. The only change is replacing copy_from_user with get_user when copying a scalar. Signed-off-by:
-
Tvrtko Ursulin authored
If userspace provides an unknown or invalid handle anywhere in the handle array the rest of the driver will not handle that well. Fix it by checking handle was looked up successfully or otherwise fail the extension by jumping into the existing unwind. Signed-off-by:
-
Tvrtko Ursulin authored
If userspace provides an unknown or invalid handle anywhere in the handle array the rest of the driver will not handle that well. Fix it by checking handle was looked up successfully or otherwise fail the extension by jumping into the existing unwind. Signed-off-by:
-
Tvrtko Ursulin authored
If fetching of userspace memory fails during the main loop, all drm sync objs looked up until that point will be leaked because of the missing drm_syncobj_put. Fix it by exporting and using a common cleanup helper. Signed-off-by:
-
Tvrtko Ursulin authored
If fetching of userspace memory fails during the main loop, all drm sync objs looked up until that point will be leaked because of the missing drm_syncobj_put. Fix it by exporting and using a common cleanup helper. Signed-off-by:
-
Tvrtko Ursulin authored
Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into. Signed-off-by:
-
- 12 Jul, 2024 1 commit
-
-
Philipp Stanner authored
nouveau_sched_init() uses the function drm_sched_init(). The latter function has parameters called "hang_limit" and "timeout" in its API documentation. nouveau_sched_init(), however, defines a variable called "job_hang_limit" which is passed to drm_sched_init()'s "timeout" parameter. The actual "hang_limit" parameter is directly set to 0. Rename "job_hang_limit" to "timeout". Signed-off-by:
Philipp Stanner <pstanner@redhat.com> Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712062618.8057-1-pstanner@redhat.com
-
- 11 Jul, 2024 2 commits
-
-
Imre Deak authored
Add a helper to dump the DPCD descriptor for an LTTPR PHY. This is based on [1] and [2] moving the helper to DRM core as suggested by Ville. [1] https://lore.kernel.org/all/20240703155937.1674856-5-imre.deak@intel.com [2] https://lore.kernel.org/all/20240703155937.1674856-6-imre.deak@intel.com Cc: dri-devel@lists.freedesktop.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-6-imre.deak@intel.com
-
Hsin-Yi Wang authored
The raw edid of the panel is: 00 ff ff ff ff ff ff 00 09 e5 e8 0a 00 00 00 00 2a 1f 01 04 a5 1e 13 78 03 fb f5 96 5d 5a 91 29 1e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 9c 3e 80 c8 70 b0 3c 40 30 20 36 00 2e bc 10 00 00 1a 00 00 00 fd 00 28 3c 4c 4c 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 42 4f 45 20 43 51 0a 20 20 20 20 20 20 00 00 00 fe 00 4e 56 31 34 30 57 55 4d 2d 4e 34 31 0a 00 26 Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 10 Jul, 2024 8 commits
-
-
Mario Limonciello authored
When the `power_saving_policy` property is set to bit mask "Require color accuracy" ABM should be disabled immediately and any requests by sysfs to update will return an -EBUSY error. When the `power_saving_policy` property is set to bit mask "Require low latency" PSR should be disabled. When the property is restored to an empty bit mask ABM and PSR can be enabled again. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703051722.328-3-mario.limonciello@amd.com
-
Mario Limonciello authored
The `power saving policy` DRM property is an optional property that can be added to a connector by a driver. This property is for compositors to indicate intent of policy of whether a driver can use power saving features that may compromise the experience intended by the compositor. Acked-by:
-
Vignesh Raman authored
Uprev IGT to the latest version, which includes a fix for the writeback tests issue on MSM devices. Enable debugging for igt-runner to log output such as 'Begin test' and 'End test'. This will help identify which test causes system freeze or hangs. Update xfails and add metadata header for each flake test. Signed-off-by:
Vignesh Raman <vignesh.raman@collabora.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm tests Signed-off-by:
Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240704092202.75551-1-vignesh.raman@collabora.com
-
Zhaoxiong Lv authored
The init_code of the starry-er88577 panel is very similar to the panel-boe-th101mb31ig002-28a.c driver, so we make it compatible with the panel-boe-th101mb31ig002-28a.c driver Signed-off-by:
Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240709134754.28013-6-lvzhaoxiong@huaqin.corp-partner.google.comSigned-off-by:
-
Zhaoxiong Lv authored
The starry-er88577 is a 10.1" WXGA TFT-LCD panel, and the init_code of the starry-er88577 panel is very similar to the boe-th101mb31ig002 panel, so We will add a new configuration based on "boe,th101mb31ig002-28a.yaml". Because the panel used reset gpio before but did not add the definition of "reset gpio" in binding, reset gpio was added in binding, but since the starry-er88577 panel did not use "reset gpio", a judgment was added here. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240709134754.28013-5-lvzhaoxiong@huaqin.corp-partner.google.comSigned-off-by:
-
Zhaoxiong Lv authored
Remove conditional code and always use mipi_dsi_dcs_*multi() wrappers to simplify driver's init/enable/exit code. Convert the hex in init_code from UPPERCASE to lowercase. Signed-off-by:
-
Zhaoxiong Lv authored
Switch the driver to use devm_gpiod_get_optional() on reset_gpio to avoid driver probe issues when reset line is not specified. Signed-off-by:
-
Zhaoxiong Lv authored
This driver currently only applies to one panel. Modify it to be compatible with other panels. Signed-off-by:
-
- 09 Jul, 2024 12 commits
-
-
Cong Yang authored
These panels have some common cmds (e0h~e3h,80h), let's break them into helper functions. Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Cong Yang authored
The Melfas lmfbx101117480 is a 10.1" WXGA TFT-LCD panel, use jd9365da controller, which fits in nicely with the existing panel-jadard-jd9365da-h3 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Cong Yang authored
The Melfas lmfbx101117480 is a 10.1" WXGA TFT LCD panel with jadard-jd9365da controller. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Manikandan Muralidharan authored
Add support for the Microchip AC40T08A MIPI Display panel. This panel uses a Himax HX8394 display controller and requires a vendor provided init sequence. The display resolution is 720x1280@60Hz with width and height of 76mm and 132mm respectively. Signed-off-by:
Manikandan Muralidharan <manikandan.m@microchip.com> Reviewed-by:
-
Manikandan Muralidharan authored
Switch the driver to use devm_gpiod_get_optional() on reset_gpio to avoid driver probe issues when reset line is not specified. Signed-off-by:
-
Manikandan Muralidharan authored
Add compatible string for the Microchip's AC40T08A MIPI Display panel.This panel uses a Himax HX8394 display controller. The reset line is not populated and leads to driver probe issues, thus add conditional block to narrow reset-gpio property per variant. Signed-off-by:
-
Thomas Hellström authored
Use the LRU walker for eviction. This helps removing a lot of code with weird locking semantics. The functionality is slightly changed so that when trylocked buffer objects are exhausted, we continue to interleave walks with ticket-locks while there is still progress made. The list walks are not restarted in-between evictions. Also provide a separate ttm_bo_evict_first() function for its single user. The context of that user allows sleeping dma_resv locks. v6: - Various cleanups suggested by Matthew Brost. - Fix error return code of ttm_bo_evict_first(). (Matthew Brost) - Fix an error check that was inverted. (Matthew Brost) v7: - Use s64 rather than long (Christian König) - Early ttm_resource_cursor_fini() in ttm_bo_evict_first(). - Simplify check for bo_moved in ttm_bo_evict_first(). (Christian König) - Don't evict pinned bos. Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-8-thomas.hellstrom@linux.intel.comSigned-off-by:
Christian König <christian.koenig@amd.com>
-
Thomas Hellström authored
Rework the TTM swapping to use the LRU walker helper. This helps fixing up the ttm_bo_swapout() interface to be consistent about not requiring any locking. For now mimic the current behaviour of using trylock only. We could be using ticket-locks here but defer that until it's deemed necessary. The TTM swapout functionality is a bit weird anyway since it alternates between memory types without exhausting TTM_PL_SYSTEM first. Intentionally keep pages as the unit of progress since changing that to bytes is an unrelated change that can be done later. v6: - Improve on error code translation in the swapout callback (Matthew Brost). v7: - Use s64 rather than long. - Remove ttm_resource_cursor_fini() since it's no longer used. - Rename ttm_resource_cursor_fini_locked() to ttm_resource_cursor_fini(). - Don't swap out pinned bos. Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
-
Thomas Hellström authored
Provide a generic LRU walker in TTM, in the spirit of drm_gem_lru_scan() but building on the restartable TTM LRU functionality. The LRU walker optionally supports locking objects as part of a ww mutex locking transaction, to mimic to some extent the current functionality in ttm. However any -EDEADLK return is converted to -ENOSPC and then to -ENOMEM before reaching the driver, so that the driver will need to backoff and possibly retry without being able to keep the ticket. v3: - Move the helper to core ttm. - Remove the drm_exec usage from it for now, it will be reintroduced later in the series. v4: - Handle the -EALREADY case if ticketlocking. v6: - Some cleanup and added code comments (Matthew Brost) - Clarified the ticketlock in the commit message (Matthew Brost) v7: - Use s64 rather than long for the target and progress (Christian König) - Update documentation to not encourage using pages as a progress measure. (Christian König) - Remove cond_resched(). (Christian König) Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
-
Thomas Hellström authored
To address the problem with hitches moving when bulk move sublists are lru-bumped, register the list cursors with the ttm_lru_bulk_move structure when traversing its list, and when lru-bumping the list, move the cursor hitch to the tail. This also means it's mandatory for drivers to call ttm_lru_bulk_move_init() and ttm_lru_bulk_move_fini() when initializing and finalizing the bulk move structure, so add those calls to the amdgpu- and xe driver. Compared to v1 this is slightly more code but less fragile and hopefully easier to understand. Changes in previous series: - Completely rework the functionality - Avoid a NULL pointer dereference assigning manager->mem_type - Remove some leftover code causing build problems v2: - For hitch bulk tail moves, store the mem_type in the cursor instead of with the manager. v3: - Remove leftover mem_type member from change in v2. v6: - Add some lockdep asserts (Matthew Brost) - Avoid NULL pointer dereference (Matthew Brost) - No need to check bo->resource before dereferencing bo->bulk_move (Matthew Brost) Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Acked-by:
-
Thomas Hellström authored
Have iterators insert themselves into the list they are iterating over using hitch list nodes. Since only the iterator owner can remove these list nodes from the list, it's safe to unlock the list and when continuing, use them as a starting point. Due to the way LRU bumping works in TTM, newly added items will not be missed, and bumped items will be iterated over a second time before reaching the end of the list. The exception is list with bulk move sublists. When bumping a sublist, a hitch that is part of that sublist will also be moved and we might miss items if restarting from it. This will be addressed in a later patch. Changes in previous series: - Updated ttm_resource_cursor_fini() documentation. v2: - Don't reorder ttm_resource_manager_first() and _next(). (Christian König). - Use list_add instead of list_move (Christian König) v3: - Split into two patches, one cleanup, one new functionality (Christian König) - use ttm_resource_cursor_fini_locked() instead of open-coding (Matthew Brost) Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
-
Thomas Hellström authored
To make the transition to using lru hitches easier, simplify the ttm_resource_manager_next() interface to only take the cursor and reuse ttm_resource_manager_next() functionality from ttm_resource_manager_first(). Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
-
