... and get_unused_fd() a macro around it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Both modular callers of sock_map_fd() had been buggy; sctp one leaks
descriptor and file if copy_to_user() fails, 9p one shouldn't be
exposing file in the descriptor table at all.

Switch both to sock_alloc_file(), export it, unexport sock_map_fd() and
make it static.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull more networking fixes from David Miller:

 1) Eric Dumazet discovered and fixed what turned out to be a family of
    bugs.  These functions were using pskb_may_pull() which might need
    to reallocate the linear SKB data buffer, but the callers were not
    expecting this possibility.  The callers have cached pointers to the
    packet header areas, and would need to reload them if we were to
    continue using pskb_may_pull().

    So they could end up reading garbage.

    It's easier to just change these RAW4/RAW6/MIP6 routines to use
    skb_header_pointer() instead of pskb_may_pull(), which won't modify
    the linear SKB data area.

 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can
    call down into the TCP keepalive code.  The case basically involves
    creating a raw socket with sk_protocol == IPPROTO_TCP, then calling
    setsockopt(sock_fd, SO_KEEPALIVE, ...)

    Fixed by Eric Dumazet.

 3) Bluetooth devices do not get configured properly while being powered
    on, resulting in always using legacy pairing instead of SSP.  Fix
    from Andrzej Kaczmarek.

 4) Bluetooth cancels delayed work erroneously, put stricter checks in
    place.  From Andrei Emeltchenko.

 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in
    cfg80211, from Luis R.  Rodriguez.

 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach.

 7) Missing module license in bcm87xx driver, from Peter Huewe.

 8) Team driver can lose port changed events when adding devices to a
    team, fix from Jiri Pirko.

 9) Fix endless loop when trying ot unregister PPPOE device in zombie
    state, from Xiaodong Xu.

10) batman-adv layer needs to set MAC address of software device
    earlier, otherwise we call tt_local_add with it uninitialized.

11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but
    that doesn't program the device properly.  From Marek Vasut.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv6: mip6: fix mip6_mh_filter()
  ipv6: raw: fix icmpv6_filter()
  net: guard tcp_set_keepalive() to tcp sockets
  phy/micrel: Add missing header to micrel_phy.h
  phy/micrel: Rename KS80xx to KSZ80xx
  phy/micrel: Implement support for KSZ8021
  batman-adv: Fix symmetry check / route flapping in multi interface setups
  batman-adv: Fix change mac address of soft iface.
  pppoe: drop PPPOX_ZOMBIEs in pppoe_release
  team: send port changed when added
  ipv4: raw: fix icmp_filter()
  net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver
  iwlwifi: don't double free the interrupt in failure path
  cfg80211: fix possible circular lock on reg_regdb_search()
  Bluetooth: Fix not removing power_off delayed work
  Bluetooth: Fix freeing uninitialized delayed works
  Bluetooth: mgmt: Fix enabling LE while powered off
  Bluetooth: mgmt: Fix enabling SSP while powered off

mip6_mh_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Included fixes:
- fix the behaviour of batman-adv in case of virtual interface MAC change event
- fix symmetric link check in neighbour selection
Signed-off-by: David S. Miller <davem@davemloft.net>

icmpv6_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull() and
change the prototype to make clear both sk and skb are const.

Also, if icmpv6 header cannot be found, do not deliver the packet,
as we do in IPv4.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SuperH fix from Paul Mundt:
 "One last minute regression fix.."

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: pfc: Fix up GPIO mux type reconfig case.

Merge misc fixes from Andrew Morton:
 "One maintainer change and three bugfixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (4 commits)
  c/r: prctl: fix build error for no-MMU case
  lib/flex_proportions.c: fix corruption of denominator in flexible proportions
  checksyscalls: fix "here document" handling
  pwm-backlight: take over maintenance

Commit 1ad75b9e ("c/r: prctl: add minimal address test to
PR_SET_MM") added some address checking to prctl_set_mm() used by
checkpoint-restore.  This causes a build error for no-MMU systems:

   kernel/sys.c: In function 'prctl_set_mm':
   kernel/sys.c:1868:34: error: 'mmap_min_addr' undeclared (first use in this function)

The test for mmap_min_addr doesn't make a lot of sense for no-MMU code
as noted in commit 6e141546 ("NOMMU: Optimise away the
{dac_,}mmap_min_addr tests").

This patch defines mmap_min_addr as 0UL in the no-MMU case so that the
compiler will optimize away tests for "addr < mmap_min_addr".
Signed-off-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: <stable@vger.kernel.org>	[3.6.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When racing with CPU hotplug, percpu_counter_sum() can return negative
values for the number of observed events.

This confuses fprop_new_period(), which uses unsigned type and as a
result number of events is set to big *positive* number.  From that
moment on, things go pear shaped and can result e.g.  in division by
zero as denominator is later truncated to 32-bits.

This bug causes a divide-by-zero oops in bdi_dirty_limit() in Borislav's
3.6.0-rc6 based kernel.

Fix the issue by using a signed type in fprop_new_period().  That makes
us bail out from the function without doing anything (mistakenly)
thinking there are no events to age.  That makes aging somewhat
inaccurate but getting accurate data would be rather hard.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Borislav Petkov <bp@amd64.org>
Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"echo" doesn't read from stdin, therefore the checksyscalls script didn't
warn about not implemented system calls anymore since 29dc54c6
("checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source").

Use "cat" instead of "echo" which handles this correctly.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since the pwm-backlight driver is lacking a proper maintainer and is the
heaviest user of the PWM framework I'm taking over maintenance.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Arun Murthy <arun.murthy@stericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Robert Morell <rmorell@nvidia.com>
Cc: Dilan Lee <dilee@nvidia.com>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some drivers need to switch pin states between GPIO and pin function at
runtime, which was inadvertently broken in the pinctrl driver for GPIOs
being bound to a specific direction.

This fixes up the request path to ensure that previously configured GPIOs
don't cause us to inadvertently error out with an unsupported mux on
reconfig, which in practice is primarily aimed at trapping pull-up/down
users that have yet to be implemented under the new API.

Fixes up regressions in the TPU PWM driver, amongst others.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

John W. Linville says:

====================
Please pull this last(?) batch of fixes intended for 3.6...

For the Bluetooth bits, Gustavo says this:

"Here goes probably my last update to 3.6. It includes the two patches
you were ok last week(from Andrzej Kaczmarek), those are critical
ones, and two other fixes one for a system crash and the other for
a missing lockdep annotation."

The referenced fixes from Andrzej prevent attempts to configure devices
that are powered-off.

Along with the Bluetooth fixes, there are a couple of 802.11 fixes.
Emmanuel Grumbach gives us an iwlwifi fix to prevent releasing an
interrupt twice.  Luis R. Rodriguez provides a fix for a possible
circular lock dependency in the cfg80211 regulatory enforcement code.

All of these have been in linux-next for a few days.  I hope they are
not too late to make the 3.6 release!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull tile gxio ABI fix from Chris Metcalf:
 "This fixes a last-minute change in the Tilera hypervisor ABI for TRIO
  (PCI root complex) support.  We've locked in this ABI going forward
  and will make sure no further ABI changes like this occur."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: gxio iorpc numbering change for TRIO interface

Pull vfio fixes from Alex Williamson:
 "VFIO doc update and virqfd race fix"

* tag 'vfio-for-linus' of git://github.com/awilliam/linux-vfio:
  vfio: Fix virqfd release race
  vfio: Trivial Documentation correction

Merge tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull a Xen fix from Konrad Rzeszutek Wilk:
 "It is a bug-fix when we run the initial PV guest on a AMD K8 machine
  and have CONFIG_AMD_NUMA enabled and detect the NUMA topology from the
  Northbridge.

  We end up in the situation where the initial domain gets too much
  information and gets confused and crashes - the fix is to restrict the
  domain to get the information - and we do it by just disabling NUMA on
  the PV guest (the hypervisor is still able to do its proper NUMA
  allocations of guests).

  It is OK to disable the PV guest from accessing NUMA data as right now
  we do not inject any NUMA node information to the PV guests.  When we
  do get to that point, then this patch will have to be reverted."

 * Disable PV NUMA support as we do not do anything with it (yet) and it
   can cause bootup crashes on certain AMD machines.

* tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/boot: Disable NUMA for PV guests.

Pull two ceph fixes from Sage Weil:
 "The first fixes a leak in the rbd setup error path, and the second
  fixes a more serious problem with mismatched kmap/kunmap that surfaced
  after the recent refactoring work."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: only kunmap kmapped pages
  rbd: drop dev reference on error in rbd_open()

Its possible to use RAW sockets to get a crash in
tcp_set_keepalive() / sk_reset_timer()

Fix is to make sure socket is a SOCK_STREAM one.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The license header was missing in micrel_phy.h . This patch adds
one.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no such part as KS8001, KS8041 or KS8051. There are only
KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match
the Micrel naming.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The KSZ8021 PHY was previously caught by KS8051, which is not correct.
This PHY needs additional setup if it is strapped for address 0. In such
case an reserved bit must be written in the 0x16, "Operation Mode Strap
Override" register. According to the KS8051 datasheet, that bit means
"PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021.
The issue where the ethernet controller (Freescale FEC) did not communicate
with network is fixed by writing this bit as 1.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An ABI numbering change was made in the hypervisor for Tilera's 4.1
MDE release (just shipped).  It's incompatible with the previous 4.0
release ABI numbering, so we track the new numbering going forward.
We plan to avoid modifying ABI numbering for these interfaces again.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

The hypervisor is in charge of allocating the proper "NUMA" memory
and dealing with the CPU scheduler to keep them bound to the proper
NUMA node. The PV guests (and PVHVM) have no inkling of where they
run and do not need to know that right now. In the future we will
need to inject NUMA configuration data (if a guest spans two or more
NUMA nodes) so that the kernel can make the right choices. But those
patches are not yet present.

In the meantime, disable the NUMA capability in the PV guest, which
also fixes a bootup issue. Andre says:

"we see Dom0 crashes due to the kernel detecting the NUMA topology not
by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA).

This will detect the actual NUMA config of the physical machine, but
will crash about the mismatch with Dom0's virtual memory. Variation of
the theme: Dom0 sees what it's not supposed to see.

This happens with the said config option enabled and on a machine where
this scanning is still enabled (K8 and Fam10h, not Bulldozer class)

We have this dump then:
NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10
Scanning NUMA topology in Northbridge 24
Number of physical nodes 4
Node 0 MemBase 0000000000000000 Limit 0000000040000000
Node 1 MemBase 0000000040000000 Limit 0000000138000000
Node 2 MemBase 0000000138000000 Limit 00000001f8000000
Node 3 MemBase 00000001f8000000 Limit 0000000238000000
Initmem setup node 0 0000000000000000-0000000040000000
  NODE_DATA [000000003ffd9000 - 000000003fffffff]
Initmem setup node 1 0000000040000000-0000000138000000
  NODE_DATA [0000000137fd9000 - 0000000137ffffff]
Initmem setup node 2 0000000138000000-00000001f8000000
  NODE_DATA [00000001f095e000 - 00000001f0984fff]
Initmem setup node 3 00000001f8000000-0000000238000000
Cannot find 159744 bytes in node 3
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar
RIP: e030:[<ffffffff81d220e6>]  [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
.. snip..
  [<ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178
  [<ffffffff81d23348>] sparse_init+0xe4/0x25a
  [<ffffffff81d16840>] paging_init+0x13/0x22
  [<ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b
  [<ffffffff81683954>] ? printk+0x3c/0x3e
  [<ffffffff81d01a38>] start_kernel+0xe5/0x468
  [<ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1
  [<ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36
  [<ffffffff81d050ee>] xen_start_kernel+0x565/0x56c
"

so we just disable NUMA scanning by setting numa_off=1.

CC: stable@vger.kernel.org
Reported-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Pull kbuild fixes from Michal Marek:
 "There are two more kbuild fixes for 3.6.

  One fixes a race between x86's archscripts target and the rule
  (re)building scripts/basic/fixdep.  The second is a fix for the
  previous attempt at fixing make firmware_install with make 3.82.
  This new solution should work with any version of GNU make"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  x86/kbuild: archscripts depends on scripts_basic
  firmware: fix directory creation rule matching with make 3.80

Pull hwmon subsystem fixes from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (fam15h_power) Tweak runavg_range on resume
  hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug
  hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug

Pull SCSI fixes from James Bottomley:
 "This is a set of four essential fixes: two oops related (bnx2i,
  virtio-scsi), one data corruption related (hpsa) and one failure to
  boot due to interrupt routing issues (mpt2ss).

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] hpsa: fix handling of protocol error
  [SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA
  [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload
  [SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list

Fix potential NULL pointer dereference in edac_unregister_sysfs() on
system boot introduced in 3.6-rc1.

Since commit 7a623c03 ("edac: rewrite the sysfs code to use struct
device") edac_mc_alloc() no longer initializes embedded kobjects in
struct mem_ctl_info.  Therefore edac_mc_free() can no longer simply
decrement a kobject reference count to free the allocated memory unless
the memory controller driver module had also called edac_mc_add_mc().

Now edac_mc_free() will check if the newly embedded struct device has
been registered with sysfs before using either the standard device
release functions or freeing the data structures itself with logic
pulled out of the error path of edac_mc_alloc().

The BUG this patch resolves for me:

  BUG: unable to handle kernel NULL pointer dereference at   (null)
  EIP is at __wake_up_common+0x1a/0x6a
  Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000)
  Call Trace:
    complete_all+0x3f/0x50
    device_pm_remove+0x23/0xa2
    device_del+0x34/0x142
    edac_unregister_sysfs+0x3b/0x5c [edac_core]
    edac_mc_free+0x29/0x2f [edac_core]
    e7xxx_probe1+0x268/0x311 [e7xxx_edac]
    e7xxx_init_one+0x56/0x61 [e7xxx_edac]
    local_pci_probe+0x13/0x15
  ...

Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coccinelle warns about:

+ drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429

   421         if (mci->csrows) {
 > 422                 for (chn = 0; chn < tot_channels; chn++) {
   423                         csr = mci->csrows[chn];
   424                         if (csr) {
 > 425                                 for (chn = 0; chn < tot_channels; chn++)
   426                                          kfree(csr->channels[chn]);
   427                                  kfree(csr);
   428                          }
 > 429                          kfree(mci->csrows[i]);
   430                  }
   431                  kfree(mci->csrows);
   432          }

and that code block seem to mess things up in several ways (double free, memory
leak, out-of-bound reads etc.):

L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be
      "row" and "tot_csrows" respectively. Which means either memory leak, or
      out-of-bound reads (which if does not trigger an immediate page fault
      error, will further lead to kfree() on random addresses).

L425: The inner loop is reusing the same iterator "chn" as the outer loop,
      which could lead to premature end of the outer loop, and hence memory leak.

L429: The array index 'i' in mci->csrows[i] is a temporary value used in
      previous loops, and won't change at all in the current loop. Which
      means either out-of-bound read and possibly kfree(random number), or the
      same mci->csrows[i] get freed once and again, and possibly double free
      for the kfree(csr) in L427.

L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory.

The buggy code was introduced by commit de3910eb ("edac: change the mem
allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1
merge window. Fix it by freeing up resources in this order:

  free csrows[i]->channels[j]
  free csrows[i]->channels
  free csrows[i]
  free csrows

CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If receiving an OGM from a neighbor other than the currently selected
and if it has the same TQ then we are supposed to switch if this
neighbor provides a more symmetric link than the currently selected one.

However this symmetry check currently is broken if the interface of the
neighbor we received the OGM from and the one of the currently selected
neighbor differ: We are currently trying to determine the symmetry of the
link towards the selected router via the link we received the OGM from
instead of just checking via the link towards the currently selected
router.

This leads to way more route switches than necessary and can lead to
permanent route flapping in many common multi interface setups.

This patch fixes this issue by using the right interface for this
symmetry check.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>

Into function interface_set_mac_addr, the function tt_local_add was
invoked before updating dev->dev_addr. The new MAC address was not
tagged as NoPurge.
Signed-off-by: Def <def@laposte.net>

The quirk introduced with commit
00250ec9 (hwmon: fam15h_power: fix
bogus values with current BIOSes) is not only required during driver
load but also when system resumes from suspend. The BIOS might set the
previously recommended (but unsuitable) initilization value for the
running average range register during resume.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@vger.kernel.org # 3.0+

coretemp_init loops with for_each_online_cpu, adding platform_devices
and sysfs interfaces, then calls register_hotcpu_notifier.  There is a
race if a CPU is offlined or onlined after the loop, but before
register_hotcpu_notifier.  The race might result in the absence of a
platform_device+sysfs interface for an online CPU, or the presence of
a platform_device+sysfs interface for an offline CPU.  A similar race
occurs during coretemp_exit, after the module calls
unregister_hotcpu_notifier, but before it unregisters all devices, a
CPU might offline and a device for an offline CPU will exist for a
short while.

This fix surrounds for_each_online_cpu and register_hotcpu_notifier
with get_online_cpus+put_online_cpus; and surrounds
unregister_hotcpu_notifier and device unregistering with
get_online_cpus+put_online_cpus.

Build tested.
Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

via_cputemp_init loops with for_each_online_cpu, adding
platform_devices, then calls register_hotcpu_notifier.  If a CPU is
offlined between the loop and register_hotcpu_notifier, then later
onlined, via_cputemp_device_add will attempt to add platform devices
with the same ID.  A similar race occurs during via_cputemp_exit,
after the module calls unregister_hotcpu_notifier, a CPU might offline
and a device will exist for a CPU that is offline.

This fix surrounds for_each_online_cpu and register_hotcpu_notifier
with get_online_cpus+put_online_cpus; and surrounds
unregister_hotcpu_notifier and device unregistering with
get_online_cpus+put_online_cpus.

Build tested.
Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

we need to grab mutex before the reference counter reaches 0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

normally we deal with lock_mount()/umount races by checking that
mountpoint to be is still in our namespace after lock_mount() has
been done.  However, do_add_mount() skips that check when called
with MNT_SHRINKABLE in flags (i.e. from finish_automount()).  The
reason is that ->mnt_ns may be a temporary namespace created exactly
to contain automounts a-la NFS4 referral handling.  It's not the
namespace of the caller, though, so check_mnt() would fail here.
We still need to check that ->mnt_ns is non-NULL in that case,
though.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

When PPPOE is running over a virtual ethernet interface (e.g., a
bonding interface) and the user tries to delete the interface in case
the PPPOE state is ZOMBIE, the kernel will loop forever while
unregistering net_device for the reference count is not decreased to
zero which should have been done with dev_put().
Signed-off-by: Xiaodong Xu <stid.smth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>