- 05 Aug, 2019 37 commits
-
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit ac6639cd upstream. Current code sets the dsci to 0x00000080. Which doesn't make any sense, as the indicator area is located in the _left-most_ byte. Worse: if the dsci is the _shared_ indicator, this potentially clears the indication of activity for a _different_ device. tiqdio_thinint_handler() will then have no reason to call that device's IRQ handler, and the device ends up stalling. Fixes: d0c9d4a8 ("[S390] qdio: set correct bit in dsci") Cc: <stable@vger.kernel.org> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit e54e4785 upstream. When tiqdio_remove_input_queues() removes a queue from the tiq_list as part of qdio_shutdown(), it doesn't re-initialize the queue's list entry and the prev/next pointers go stale. If a subsequent qdio_establish() fails while sending the ESTABLISH cmd, it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and tiqdio_remove_input_queues() will attempt to remove the queue entry a second time. This dereferences the stale pointers, and bad things ensue. Fix this by re-initializing the list entry after removing it from the list. For good practice also initialize the list entry when the queue is first allocated, and remove the quirky checks that papered over this omission. Note that prior to commit e5218134 ("s390/qdio: fix access to uninitialized qdio_q fields"), these checks were bogus anyway. setup_queues_misc() clears the whole queue struct, and thus needs to re-init the prev/next pointers as well. Fixes: 779e6e1c ("[S390] qdio: new qdio driver.") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Heiko Carstens authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 4f18d869 upstream. The stfle inline assembly returns the number of double words written (condition code 0) or the double words it would have written (condition code 3), if the memory array it got as parameter would have been large enough. The current stfle implementation assumes that the array is always large enough and clears those parts of the array that have not been written to with a subsequent memset call. If however the array is not large enough memset will get a negative length parameter, which means that memset clears memory until it gets an exception and the kernel crashes. To fix this simply limit the maximum length. Move also the inline assembly to an extra function to avoid clobbering of register 0, which might happen because of the added min_t invocation together with code instrumentation. The bug was introduced with commit 14375bc4 ("[S390] cleanup facility list handling") but was rather harmless, since it would only write to a rather large array. It became a potential problem with commit 3ab121ab ("[S390] kernel: Add z/VM LGR detection"). Since then it writes to an array with only four double words, while some machines already deliver three double words. As soon as machines have a facility bit within the fifth double a crash on IPL would happen. Fixes: 14375bc4 ("[S390] cleanup facility list handling") Cc: <stable@vger.kernel.org> # v2.6.37+ Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit fd5de272 upstream. As kernelci.org reports, this function is not used in vdk_hs38_defconfig: arch/arc/kernel/unwind.c:188:14: warning: 'unw_hdr_alloc' defined but not used [-Wunused-function] Fixes: bc79c9a7 ("ARC: dw2 unwind: Reinstante unwinding out of modules") Link: https://kernelci.org/build/id/5d1cae3f59b514300340c132/logs/ Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit b21629da upstream. Found by syzkaller: WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]() CPU: 3 PID: 15175 Comm: a.out Tainted: G W 4.4.6-300.fc23.x86_64 #1 Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e 0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2 00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000 Call Trace: [<ffffffff813b542e>] dump_stack+0x63/0x85 [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm] [<ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm] [<ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel] [<ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm] [<ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Testcase: #include <unistd.h> #include <sys/ioctl.h> #include <fcntl.h> #include <string.h> #include <linux/kvm.h> long r[8]; int main() { memset(r, -1, sizeof(r)); r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul); r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul); return 0; } Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Milan Broz authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 2eba4e64 ] DM verity should also use DMERR_LIMIT to limit repeat data block corruption messages. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Sergej Benilov authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 8ac8a010 ] Since commit 605ad7f1 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by:
Sergej Benilov <sergej.benilov@googlemail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit aad1dcc4 ] The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a softdep line, so that the corresponding module gets prepared gracefully. Without this, a simple inclusion to initrd via dracut failed due to the missing dependency, for example. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Petr Oros authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 2e5db6eb ] Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e ("be2net: Add link test to list of ethtool self tests.") Signed-off-by:
Petr Oros <poros@redhat.com> Reviewed-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 27e23d89 ] omap3xxx_prm_enable_io_wakeup() is marked __init, but its caller is not, so we get a warning with clang-8: WARNING: vmlinux.o(.text+0x343c8): Section mismatch in reference from the function omap3xxx_prm_late_init() to the function .init.text:omap3xxx_prm_enable_io_wakeup() The function omap3xxx_prm_late_init() references the function __init omap3xxx_prm_enable_io_wakeup(). This is often because omap3xxx_prm_late_init lacks a __init annotation or the annotation of omap3xxx_prm_enable_io_wakeup is wrong. When building with gcc, omap3xxx_prm_enable_io_wakeup() is always inlined, so we never noticed in the past. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Andrew Murray <andrew.murray@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 085ebfe9 ] perf_sample_regs_user() uses 'current->mm' to test for the presence of userspace, but this is insufficient, consider use_mm(). A better test is: '!(current->flags & PF_KTHREAD)', exec() clears PF_KTHREAD after it sets the new ->mm but before it drops to userspace for the first time. Possibly obsoletes: bf05fc25 ("powerpc/perf: Fix oops when kthread execs user process") Reported-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reported-by:
Young Xiao <92siuyang@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4018994f ("perf: Add ability to attach user level registers dump to sample") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit d17ba0f6 upstream. Driver does not want to keep packets in Tx queue when link is lost. But present code only reset NIC to flush them, but does not prevent queuing new packets. Moreover reset sequence itself could generate new packets via netconsole and NIC falls into endless reset loop. This patch wakes Tx queue only when NIC is ready to send packets. This is proper fix for problem addressed by commit 0f9e980b ("e1000e: fix cyclic resets at link up with active tx"). Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Tested-by:
Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Tested-by:
Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Sean Young authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 1287533d upstream. When building BPF code using "clang -target bpf -c", clang does not define __linux__. To build BPF IR decoders the include linux/lirc.h is needed which includes linux/types.h. Currently this workaround is needed: https://git.linuxtv.org/v4l-utils.git/commit/?id=dd3ff81f58c4e1e6f33765dc61ad33c48ae6bb07 This check might otherwise be useful to stop users from using a non-linux compiler, but if you're doing that you are going to have a lot more trouble anyway. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21149/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Vishnu DASA authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 1c2eb5b2 upstream. The VMCI handle array has an integer overflow in vmci_handle_arr_append_entry when it tries to expand the array. This can be triggered from a guest, since the doorbell link hypercall doesn't impose a limit on the number of doorbell handles that a VM can create in the hypervisor, and these handles are stored in a handle array. In this change, we introduce a mandatory max capacity for handle arrays/lists to avoid excessive memory usage. Signed-off-by:
Vishnu Dasa <vdasa@vmware.com> Reviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Christian Lamparter authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit feb09b29 upstream. This patch follows Alan Stern's recent patch: "p54: Fix race between disconnect and firmware loading" that overhauled carl9170 buggy firmware loading and driver unbinding procedures. Since the carl9170 code was adapted from p54 it uses the same functions and is likely to have the same problem, but it's just that the syzbot hasn't reproduce them (yet). a summary from the changes (copied from the p54 patch): * Call usb_driver_release_interface() rather than device_release_driver(). * Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. * During the firmware loading process, take a reference to the USB interface instead of the USB device. * Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). and * Make sure to prevent use-after-free bugs by explicitly setting the driver context to NULL after signaling the completion. Cc: <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 7379e6ba upstream. The interrupt handler `pci230_interrupt()` causes a null pointer dereference for a PCI260 card. There is no analog output subdevice for a PCI260. The `dev->write_subdev` subdevice pointer and therefore the `s_ao` subdevice pointer variable will be `NULL` for a PCI260. The following call near the end of the interrupt handler results in the null pointer dereference for a PCI260: comedi_handle_events(dev, s_ao); Fix it by only calling the above function if `s_ao` is valid. Note that the other uses of `s_ao` in the calls `pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev, s_ao);` will never be reached for a PCI260, so they are safe. Fixes: 39064f23 ("staging: comedi: amplc_pci230: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit b8336be6 upstream. The interrupt handler `dt282x_interrupt()` causes a null pointer dereference for those supported boards that have no analog output support. For these boards, `dev->write_subdev` will be `NULL` and therefore the `s_ao` subdevice pointer variable will be `NULL`. In that case, the following call near the end of the interrupt handler results in a null pointer dereference: comedi_handle_events(dev, s_ao); Fix it by only calling the above function if `s_ao` is valid. (There are other uses of `s_ao` by the interrupt handler that may or may not be reached depending on values of hardware registers. Trust that they are reliable for now.) Note: commit 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()") propagates an earlier error from commit f21c74fa ("staging: comedi: dt282x: use cfc_handle_events()"). Fixes: 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
-
Yoshihiro Shimoda authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit b2357839 upstream. The old commit 6e4b74e4 ("usb: renesas: fix scheduling in atomic context bug") fixed an atomic issue by using workqueue for the shdmac dmaengine driver. However, this has a potential race condition issue between the work pending and usbhsg_ep_free_request() in gadget mode. When usbhsg_ep_free_request() is called while pending the queue, since the work_struct will be freed and then the work handler is called, kernel panic happens on process_one_work(). To fix the issue, if we could call cancel_work_sync() at somewhere before the free request, it could be easy. However, the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver calls free request via gether_disconnect()). For now, almost all users are having "USB-DMAC" and the DMAengine driver can be used on atomic. So, this patch adds a workaround for a race condition to call the DMAengine APIs without the workqueue. This means we still have TODO on shdmac environment (SH7724), but since it doesn't have SMP, the race condition might not happen. Fixes: ab330cf3 ("usb: renesas_usbhs: add support for USB-DMAC") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Kiruthika Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit d29fcf70 upstream. On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash. Fixed by releasing the lock in rx_submit after port_usb is used. Fixes: 2b3d942c ("usb ethernet gadget: split out network core") Cc: <stable@vger.kernel.org> Signed-off-by:
Kiruthika Varadarajan <Kiruthika.Varadarajan@harman.com> Signed-off-by:
-
Jörgen Storvist authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit aed2a262 upstream. Added USB IDs for GosunCn ME3630 cellular module in RNDIS mode. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0601 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=b950269c C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andreas Fritiofson authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit f8377eff upstream. This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the second channel is available for use as a serial port. Signed-off-by:
Andreas Fritiofson <andreas.fritiofson@unjo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Brian Norris authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 63d7ef36 upstream. Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers. Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI. While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes. Fixes: 685c9b77 ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
-
Hongjie Fang authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 5858bdad upstream. The directory may have been removed when entering fscrypt_ioctl_set_policy(). If so, the empty_dir() check will return error for ext4 file system. ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'. If the fs is mounted with errors=panic, it will trigger a panic issue. Add the check IS_DEADDIR() to fix this problem. Fixes: 9bd8212f ("ext4 crypto: add encryption policy and password salt support") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Hongjie Fang <hongjiefang@asrmicro.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 685c9b77 upstream. Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that the source descriptor entries contain the enough size for each type and performs copying without checking the source size. This may lead to read over boundary. Fix this by putting the source size check in appropriate places. Signed-off-by:
-
Dianzhang Chen authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 993773d1 upstream. The index to access the threads tls array is controlled by userspace via syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability. The index can be controlled from: ptrace -> arch_ptrace -> do_get_thread_area. Fix this by sanitizing the user supplied index before using it to access the p->thread.tls_array. Signed-off-by:
Dianzhang Chen <dianzhangchen0@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1561524630-3642-1-git-send-email-dianzhangchen0@gmail.comSigned-off-by:
-
Dianzhang Chen authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 31a2fbb3 upstream. The index to access the threads ptrace_bps is controlled by userspace via syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability. The index can be controlled from: ptrace -> arch_ptrace -> ptrace_get_debugreg. Fix this by sanitizing the user supplied index before using it access thread->ptrace_bps. Signed-off-by:
-
Steven J. Magnani authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit fa33cdbf upstream. In some cases, using the 'truncate' command to extend a UDF file results in a mismatch between the length of the file's extents (specifically, due to incorrect length of the final NOT_ALLOCATED extent) and the information (file) length. The discrepancy can prevent other operating systems (i.e., Windows 10) from opening the file. Two particular errors have been observed when extending a file: 1. The final extent is larger than it should be, having been rounded up to a multiple of the block size. B. The final extent is not shorter than it should be, due to not having been updated when the file's information length was increased. [JK: simplified udf_do_extend_final_block(), fixed up some types] Fixes: 2c948b3f ("udf: Avoid IO in udf_clear_inode") CC: stable@vger.kernel.org Signed-off-by:
Steven J. Magnani <steve@digidescorp.com> Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.comSigned-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Mauro S. M. Rodrigues authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit cf18cecc ] Some transceivers may comply with SFF-8472 even though they do not implement the Digital Diagnostic Monitoring (DDM) interface described in the spec. The existence of such area is specified by the 6th bit of byte 92, set to 1 if implemented. Currently, without checking this bit, bnx2x fails trying to read sfp module's EEPROM with the follow message: ethtool -m enP5p1s0f1 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it is assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM data was confirmed by Mellanox as correct and similar to other Passive DACs from other manufacturers. Signed-off-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Acked-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
-
Mariusz Tkaczyk authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 9642fa73 ] Stopping external metadata arrays during resync/recovery causes retries, loop of interrupting and starting reconstruction, until it hit at good moment to stop completely. While these retries curr_mark_cnt can be small- especially on HDD drives, so subtraction result can be smaller than 0. However it is casted to uint without checking. As a result of it the status bar in /proc/mdstat while stopping is strange (it jumps between 0% and 99%). The real problem occurs here after commit 72deb455 ("block: remove CONFIG_LBDAF"). Sector_div() macro has been changed, now the divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0. Check if db value can be really counted and replace these macro by div64_u64() inline. Signed-off-by:
Mariusz Tkaczyk <mariusz.tkaczyk@intel.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Bartosz Golaszewski authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 68f2515b ] The lcdc device is missing the dma_coherent_mask definition causing the following warning on da850-evm: da8xx_lcdc da8xx_lcdc.0: found Sharp_LK043T1DG01 panel ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:247 dma_alloc_attrs+0xc8/0x110 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.0-rc3-00077-g16d72dd4 #18 Hardware name: DaVinci DA850/OMAP-L138/AM18x EVM [<c000fce8>] (unwind_backtrace) from [<c000d900>] (show_stack+0x10/0x14) [<c000d900>] (show_stack) from [<c001a4f8>] (__warn+0xec/0x114) [<c001a4f8>] (__warn) from [<c001a634>] (warn_slowpath_null+0x3c/0x48) [<c001a634>] (warn_slowpath_null) from [<c0065860>] (dma_alloc_attrs+0xc8/0x110) [<c0065860>] (dma_alloc_attrs) from [<c02820f8>] (fb_probe+0x228/0x5a8) [<c02820f8>] (fb_probe) from [<c02d3e9c>] (platform_drv_probe+0x48/0x9c) [<c02d3e9c>] (platform_drv_probe) from [<c02d221c>] (really_probe+0x1d8/0x2d4) [<c02d221c>] (really_probe) from [<c02d2474>] (driver_probe_device+0x5c/0x168) [<c02d2474>] (driver_probe_device) from [<c02d2728>] (device_driver_attach+0x58/0x60) [<c02d2728>] (device_driver_attach) from [<c02d27b0>] (__driver_attach+0x80/0xbc) [<c02d27b0>] (__driver_attach) from [<c02d047c>] (bus_for_each_dev+0x64/0xb4) [<c02d047c>] (bus_for_each_dev) from [<c02d1590>] (bus_add_driver+0xe4/0x1d8) [<c02d1590>] (bus_add_driver) from [<c02d301c>] (driver_register+0x78/0x10c) [<c02d301c>] (driver_register) from [<c000a5c0>] (do_one_initcall+0x48/0x1bc) [<c000a5c0>] (do_one_initcall) from [<c05cae6c>] (kernel_init_freeable+0x10c/0x1d8) [<c05cae6c>] (kernel_init_freeable) from [<c048a000>] (kernel_init+0x8/0xf4) [<c048a000>] (kernel_init) from [<c00090e0>] (ret_from_fork+0x14/0x34) Exception stack(0xc6837fb0 to 0xc6837ff8) 7fa0: 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 8a8073511be81dd2 ]--- Add a 32-bit mask to the platform device's definition. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Bartosz Golaszewski authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 0c0c9b57 ] The BB expander at 0x21 i2c bus 1 fails to probe on da850-evm because the board doesn't set has_full_constraints to true in the regulator API. Call regulator_has_full_constraints() at the end of board registration just like we do in da850-lcdk and da830-evm. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Anson Huang authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit ce9a53eb ] There are several scenarios that keyboard can NOT wake up system from suspend, e.g., if a keyboard is depressed between system device suspend phase and device noirq suspend phase, the keyboard ISR will be called and both keyboard depress and release interrupts will be disabled, then keyboard will no longer be able to wake up system. Another scenario would be, if a keyboard is kept depressed, and then system goes into suspend, the expected behavior would be when keyboard is released, system will be waked up, but current implementation can NOT achieve that, because both depress and release interrupts are disabled in ISR, and the event check is still in progress. To fix these issues, need to make sure keyboard's depress or release interrupt is enabled after noirq device suspend phase, this patch moves the suspend/resume callback to noirq suspend/resume phase, and enable the corresponding interrupt according to current keyboard status. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Sean Nyekjaer authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 35b7fa4d ] Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch adds support for the mcp25625 to the existing mcp251x driver. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Sean Nyekjaer authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 0df82dcd ] Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch add the mcp25625 to the device tree bindings documentation. Signed-off-by:
-
Thomas Pedersen authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 55184244 ] ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning. fixes the following warning: [ 12.519089] ============================= [ 12.520042] WARNING: suspicious RCU usage [ 12.520652] 5.1.0-rc7-wt+ #16 Tainted: G W [ 12.521409] ----------------------------- [ 12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage! [ 12.522928] other info that might help us debug this: [ 12.523984] rcu_scheduler_active = 2, debug_locks = 1 [ 12.524855] 5 locks held by kworker/u8:2/152: [ 12.525438] #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.526607] #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.528001] #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90 [ 12.529116] #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90 [ 12.530233] #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90 Signed-off-by:
Thomas Pedersen <thomas@eero.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Chang-Hsien Tsai authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit f7c2d64b ] If the trace for read is larger than 4096, the return value sz will be 4096. This results in off-by-one error on buf: static char buf[4096]; ssize_t sz; sz = read(trace_fd, buf, sizeof(buf)); if (sz > 0) { buf[sz] = 0; puts(buf); } Signed-off-by:
Chang-Hsien Tsai <luke.tw@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Aaron Ma authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit aa440de3 ] Adding 2 new touchpad PNPIDs to enable middle button support. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
- 01 Aug, 2019 3 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by:Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Thomas Gleixner authored
Intel provided the following information: On all current Atom processors, instructions that use a segment register value (e.g. a load or store) will not speculatively execute before the last writer of that segment retires. Thus they will not use a speculatively written segment value. That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS entry paths can be excluded from the extra LFENCE if PTI is disabled. Create a separate bug flag for the through SWAPGS speculation and mark all out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs are excluded from the whole mitigation mess anyway. Reported-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> CVE-2019-1125 (backported from commit f36cf386) [tyhicks: Backport to Xenial: - Dropped VULNWL_HYGON() change since this kernel version doesn't know about Hygon processors - Rename X86_FEATURE_PTI to X86_FEATURE_KAISER] Signed-off-by:
-
Josh Poimboeuf authored
Somehow the swapgs mitigation entry code patch ended up with a JMPQ instruction instead of JMP, where only the short jump is needed. Some assembler versions apparently fail to optimize JMPQ into a two-byte JMP when possible, instead always using a 7-byte JMP with relocation. For some reason that makes the entry code explode with a #GP during boot. Change it back to "JMP" as originally intended. Fixes: 18ec54fd ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations") Signed-off-by:
-
