- 17 Oct, 2021 9 commits
-
-
Bart Van Assche authored
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-7-bvanassche@acm.orgSigned-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-6-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-5-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-4-bvanassche@acm.orgAcked-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Bart Van Assche authored
Since the removal of the legacy block layer there is only one completion function left in the SCSI core, namely scsi_mq_done(). Rename it into scsi_done(). Export that function to allow SCSI LLDs to call it directly. Link: https://lore.kernel.org/r/20211007202923.2174984-3-bvanassche@acm.orgReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Bart Van Assche authored
Conditional statements are faster than indirect calls. Use a structure member to track the SCSI command submitter such that later patches can call scsi_done(scmd) instead of scmd->scsi_done(scmd). The asymmetric behavior that scsi_send_eh_cmnd() sets the submission context to the SCSI error handler and that it does not restore the submission context to the SCSI core is retained. Link: https://lore.kernel.org/r/20211007202923.2174984-2-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Bart Van Assche authored
The following query shows which drivers define callbacks that are called by the power management support code in the SCSI core (scsi_pm.c): $ git grep -nHEwA16 "$(echo $(git grep -h 'scsi_register_driver(&' | sed 's/.*&//;s/\..*//') | sed 's/ /|/g')" | grep '\.pm[[:blank:]]*=[[:blank:]]' drivers/scsi/sd.c-620- .pm = &sd_pm_ops, drivers/scsi/sr.c-100- .pm = &sr_pm_ops, drivers/scsi/ufs/ufshcd.c-9765- .pm = &ufshcd_wl_pm_ops, Since unconditionally runtime resuming a device during system resume is not necessary, remove that code. Modify the SCSI disk (sd) driver such that it follows the same approach as the UFS driver, namely to skip system suspend and resume for devices that are runtime suspended. The CD-ROM code does not need to be updated since its PM callbacks do not affect the device power state. This patch has been tested as follows: [ shell 1 ] cd /sys/kernel/debug/tracing grep -E 'blk_(pre|post)_runtime|runtime_(suspend|resume)|autosuspend_delay|pm_runtime_(get|put)' available_filter_functions | while read a b; do echo "$a"; done | grep -v __pm_runtime_resume >set_ftrace_filter echo function > current_tracer echo 1 > tracing_on cat trace_pipe [ shell 2 ] cd /sys/block/sr0 # Increase the event poll interval to make it easier to derive from the # tracing output whether runtime power actions are the result of sg_inq. echo 30000 > events_poll_msecs cd device/power # Enable runtime power management. echo auto > control echo 1000 > autosuspend_delay_ms sleep 1 # Verify in shell 1 that sr0 has been runtime suspended sg_inq /dev/sr0 eject /dev/sr0 sg_inq /dev/sr0 # Disable runtime power management. echo on > control cd /sys/block/sda/device/power echo auto > control echo 1000 > autosuspend_delay_ms sleep 1 # Verify in shell 1 that sr0 has been runtime suspended sg_inq /dev/sda Link: https://lore.kernel.org/r/20211006215453.3318929-4-bvanassche@acm.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Martin Kepplinger <martin.kepplinger@puri.sm> Tested-by:Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes the next patch in this series easier to read. Link: https://lore.kernel.org/r/20211006215453.3318929-3-bvanassche@acm.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
Bart Van Assche authored
Instead of implementing asynchronous resume support in the SCSI core, rely on the device driver core for resuming SCSI devices asynchronously. Instead of only supporting asynchronous resumes, also support asynchronous suspends. Link: https://lore.kernel.org/r/20211006215453.3318929-2-bvanassche@acm.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
- 13 Oct, 2021 5 commits
-
-
Sohaib Mohamed authored
Remove repeated word: "the The amount" Link: https://lore.kernel.org/r/20211006154804.135184-1-sohaib.amhmd@gmail.comSigned-off-by:
Sohaib Mohamed <sohaib.amhmd@gmail.com> Signed-off-by:
-
Luo Jiaxing authored
If the softreset fails in the I_T reset, libsas will then continue to issue a controller reset to try to recover. However a faulty disk may cause the softreset to fail, and resetting the controller will not help this scenario. Indeed, we will just continue the cycle of error handle handling to try to recover. So if the softreset fails upon certain conditions, just disable the phy associated with the disk. The user needs to handle this problem. Link: https://lore.kernel.org/r/1634041588-74824-5-git-send-email-john.garry@huawei.comSigned-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
Export sas_phy_enable() so LLDDs can directly use it to control remote phys. We already do this for companion function sas_phy_reset(). Link: https://lore.kernel.org/r/1634041588-74824-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
Xiang Chen authored
When issuing a hardreset/linkreset/phy_set_linkrate from sysfs, the phy will be disabled and re-enabled for the directly attached scenario. It takes some time for the phy to come back up after re-enabling the phy. If the controller becomes suspended while waiting for the phy to come back, the phy up may be lost (along with the disk). To solve this problem, wait for the phy up to occur with a timeout. Indeed this is already done in hisi_sas_debug_I_T_nexus_reset() for local phys, so just relocate the functionality to hisi_sas_control_phy(). Since the HA workqueue is drained when suspending the controller, and the phy control function is called from the same workqueue, we can guarantee that the controller will not be suspended during this period. Link: https://lore.kernel.org/r/1634041588-74824-3-git-send-email-john.garry@huawei.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Xiang Chen authored
Perform driver-specific SCSI device initialization in the designated SCSI midlayer callback instead of relying on the libsas "device found" callback. The SCSI midlayer .slave_alloc interface is called prior to sending any I/O to the device. Link: https://lore.kernel.org/r/1634041588-74824-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
- 12 Oct, 2021 4 commits
-
-
Adrian Hunter authored
The SCSI error handler calls scsi_unjam_host() which can call the queue function ufshcd_queuecommand() indirectly. The error handler changes the state to UFSHCD_STATE_RESET while running, but error interrupts that happen while the error handler is running could change the state to UFSHCD_STATE_EH_SCHEDULED_NON_FATAL which would allow requests to go through ufshcd_queuecommand() even though the error handler is running. Block that hole by checking whether the error handler is in progress. Link: https://lore.kernel.org/r/20211008084048.257498-1-adrian.hunter@intel.comReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Peter Wang authored
Mediatek UFS needs auto-hibern8 disabled before suspend. Introduce a solution to do pre-suspend before SSU (sleep). Link: https://lore.kernel.org/r/20211006054705.21885-1-peter.wang@mediatek.comReviewed-by:
Peter Wang <peter.wang@mediatek.com> Signed-off-by:
-
Dan Carpenter authored
This variable is just a temporary variable, used to do an endian conversion. The problem is that the last byte is not initialized. After the conversion is completely done, the last byte is discarded so it doesn't cause a problem. But static checkers and the KMSan runtime checker can detect the uninitialized read and will complain about it. Link: https://lore.kernel.org/r/20211006073242.GA8404@kili Fixes: 5036f0a0 ("[SCSI] csiostor: Fix sparse warnings.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS conflict reported by sfr. Signed-off-by:
-
- 05 Oct, 2021 22 commits
-
-
Don Brace authored
Update driver version to reflect changes. Link: https://lore.kernel.org/r/20210928235442.201875-12-don.brace@microchip.comReviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Acked-by:
John Donnelly <john.p.donnelly@oracle.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Mike McGowen authored
Add PCI ID information for the Adaptec SmartRAID 3252-8i controller: 9005 / 028F / 9005 / 14A2 Link: https://lore.kernel.org/r/20210928235442.201875-11-don.brace@microchip.comReviewed-by: -
Kevin Barnett authored
Stop the OS from re-discovering multiple LUNs for tape drive and medium changer. Duplicate device nodes for Ultrium tape drive and medium changer are being created. The Ultrium tape drive is a multi-LUN SCSI target. It presents a LUN for the tape drive and a 2nd LUN for the medium changer. Our controller FW lists both LUNs in the RPL results. As a result, the smartpqi driver exposes both devices to the OS. Then the OS does its normal device discovery via the SCSI REPORT LUNS command, which causes it to re-discover both devices a 2nd time, which results in the duplicate device nodes. Link: https://lore.kernel.org/r/20210928235442.201875-10-don.brace@microchip.comReviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by:
-
Mike McGowen authored
Move the delay in the register polling loop to the beginning of the loop to ensure there is always a delay between writing the register and reading it. Link: https://lore.kernel.org/r/20210928235442.201875-9-don.brace@microchip.comReviewed-by:
-
Mike McGowen authored
Add support for the new extended formats in the data returned from the Report Physical LUNs command for controllers that enable this feature. The new formats allow the reporting of 16-byte WWIDs. Link: https://lore.kernel.org/r/20210928235442.201875-8-don.brace@microchip.comReviewed-by:
-
Mahesh Rajashekhara authored
Prevent kernel crash by failing outstanding I/O request when the OS takes device offline. When posted I/Os to the controller's inbound queue are not picked by the controller, the driver will halt the controller and take the controller offline. When the driver takes the controller offline, the driver will fail all the outstanding requests which can sometimes lead to an OS crash. Link: https://lore.kernel.org/r/20210928235442.201875-7-don.brace@microchip.comReviewed-by:
Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by:
-
Don Brace authored
Send a TEST UNIT READY to HBA disks and do not present them to the OS if 0x02/0x04/0x1b (SANITIZE IN PROGRESS) is returned. During boot-up, some OSes appear to hang when there are one or more disks undergoing a sanitize operation. According to SCSI SBC4 specification section 4.11.2 "Commands allowed during SANITIZE", some SCSI commands are permitted, but read/write operations are not. When the OS attempts to read the disk partition table a CHECK CONDITION ASC 0x04 ASCQ 0x1b is returned which causes the OS to retry the read until SANITIZE has completed. This can take hours. According to document HPE Smart Storage Administrator User Guide, during the sanitize erase operation, the drive is unusable. I.e. the expected behavior for SANITIZE is the that disk remains offline even after SANITIZE has completed. The customer is expected to re-enable the disk using the management utility. Link: https://lore.kernel.org/r/20210928235442.201875-6-don.brace@microchip.comReviewed-by:
-
Kevin Barnett authored
Enhance check for commands queued to the controller. Add new function pqi_nonempty_inbound_queue_count() that will wait for all I/O queued for submission to controller across all queue groups to drain. Add helper functions to obtain queue command counts for each queue group. These queues should drain quickly as they are already staged to be submitted down to the controller's IB queue. Enhance check for outstanding command completion. Update the count of outstanding commands while waiting. This value was not re-obtained and was potentially causing infinite wait for all completions. Link: https://lore.kernel.org/r/20210928235442.201875-5-don.brace@microchip.comReviewed-by:
-
Murthy Bhat authored
In some rare cases, the driver can halt the controller. Add a reason code describing why the controller was halted. Store this reason code in a controller register to aid in debugging the issue. Link: https://lore.kernel.org/r/20210928235442.201875-4-don.brace@microchip.comReviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
-
Mahesh Rajashekhara authored
Correct kdump hangs when controller is locked up. There are occasions when a controller reboot (controller soft reset) is issued when a controller firmware crash dump is in progress. This leads to incomplete controller firmware crash dump: - When the controller crash dump is in progress, and a kdump is initiated, the driver issues inbound doorbell reset to bring back the controller in SIS mode. - If the controller is in locked up state, the inbound doorbell reset does not work causing controller initialization failures. This results in the driver hanging waiting for SIS mode. To avoid an incomplete controller crash dump, add in a controller crash dump handshake: - Controller will indicate start and end of the controller crash dump by setting some register bits. - Driver will look these bits when a kdump is initiated. If a controller crash dump is in progress, the driver will wait for the controller crash dump to complete before issuing the controller soft reset then complete driver initialization. Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.comReviewed-by:
-
Don Brace authored
Update device removal path to handle issues for: - rmmod: Correct stack trace when removing devices. - rmmod: Synchronize SCSI cache. - Update handling for removing devices using sysfs. Link: https://lore.kernel.org/r/20210928235442.201875-2-don.brace@microchip.comReviewed-by:
-
Dan Carpenter authored
This function is more complicated than necessary. If we change from scnprintf() to snprintf() that lets us remove the if bytes_wrote < sizeof(protocol) checks. Also, we can use bytes_wrote ? "," : "" to print the comma and remove the separate if statement and the "is_string_nonempty" variable. [mkp: a few formatting cleanups and s/wrote/written/] Link: https://lore.kernel.org/r/20210916132605.GF25094@kiliSigned-off-by:
-
Mike Christie authored
Commit d39df158 ("scsi: iscsi: Have abort handler get ref to conn") added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but then also changed the handling of the case where we detect an already completed task where we now end up doing a goto to the common put/cleanup code. This results in a iscsi_task use after free, because the common cleanup code will do a put on the iscsi_task. This reverts the goto and moves the iscsi_get_conn() to after we've checked if the iscsi_task is valid. Link: https://lore.kernel.org/r/20211004210608.9962-1-michael.christie@oracle.com Fixes: d39df158 ("scsi: iscsi: Have abort handler get ref to conn") Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
James Smart authored
When an FC-GS I/O is aborted by lpfc, the driver requires a node pointer for a dereference operation. In the abort I/O routine, the driver miscasts a context pointer to the wrong data type and overwrites a single byte outside of the allocated space. This miscast is done in the abort I/O function handler because the handler works on both FC-GS and FC-LS commands. However, the code neglected to get the correct job location for the node. Fix this by acquiring the necessary node pointer from the correct job structure depending on the I/O type. Link: https://lore.kernel.org/r/20211004231210.35524-1-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Dan Carpenter authored
It's not holding the lock at this stage and the IRQ "flags" are not correct so it would restore something bogus. Delete the unlock statement. Link: https://lore.kernel.org/r/20211004103851.GE25015@kili Fixes: 3e641400 ("scsi: elx: efct: SCSI I/O handling routines") Signed-off-by:
-
Igor Pylypiv authored
pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a SET_NVMD_DATA response, as the log statement implies. Fixes: 1f889b58 ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition") Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.comReviewed-by:
Changyuan Lyu <changyuanl@google.com> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Igor Pylypiv <ipylypiv@google.com> Signed-off-by:
-
Igor Pylypiv authored
This is a follow up cleanup to the commit 924a3541 ("scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()") Link: https://lore.kernel.org/r/20210929025807.646589-1-ipylypiv@google.comReviewed-by:
Vishakha Channapattan <vishakhavc@google.com> Acked-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Link: https://github.com/KSPP/linux/issues/160 Link: https://lore.kernel.org/r/20210927224344.GA190701@embeddedorReviewed-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-8-d.bogdanov@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-7-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-6-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-5-d.bogdanov@yadro.comReviewed-by:
-
