- 13 Aug, 2019 5 commits
-
-
Tang Junhui authored
BugLink: https://bugs.launchpad.net/bugs/1784665 In bch_mca_scan(), the return value should not be the number of freed btree nodes, but the number of pages of freed btree nodes. Signed-off-by:
Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> (cherry picked from commit f3641c3a) Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Tang Junhui authored
BugLink: https://bugs.launchpad.net/bugs/1784665 Stripe size is shown as zero when no strip in back end device: [root@ceph132 ~]# cat /sys/block/sdd/bcache/stripe_size 0.0k Actually it should be 1T Bytes (1 << 31 sectors), but in sysfs interface, stripe_size was changed from sectors to bytes, and move 9 bits left, so the 32 bits variable overflows. This patch change the variable to a 64 bits type before moving bits. Signed-off-by:
-
Tang Junhui authored
BugLink: https://bugs.launchpad.net/bugs/1784665 After long time small writing I/O running, we found the occupancy of CPU is very high and I/O performance has been reduced by about half: [root@ceph151 internal]# top top - 15:51:05 up 1 day,2:43, 4 users, load average: 16.89, 15.15, 16.53 Tasks: 2063 total, 4 running, 2059 sleeping, 0 stopped, 0 zombie %Cpu(s):4.3 us, 17.1 sy 0.0 ni, 66.1 id, 12.0 wa, 0.0 hi, 0.5 si, 0.0 st KiB Mem : 65450044 total, 24586420 free, 38909008 used, 1954616 buff/cache KiB Swap: 65667068 total, 65667068 free, 0 used. 25136812 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2023 root 20 0 0 0 0 S 55.1 0.0 0:04.42 kworker/11:191 14126 root 20 0 0 0 0 S 42.9 0.0 0:08.72 kworker/10:3 9292 root 20 0 0 0 0 S 30.4 0.0 1:10.99 kworker/6:1 8553 ceph 20 0 4242492 1.805g 18804 S 30.0 2.9 410:07.04 ceph-osd 12287 root 20 0 0 0 0 S 26.7 0.0 0:28.13 kworker/7:85 31019 root 20 0 0 0 0 S 26.1 0.0 1:30.79 kworker/22:1 1787 root 20 0 0 0 0 R 25.7 0.0 5:18.45 kworker/8:7 32169 root 20 0 0 0 0 S 14.5 0.0 1:01.92 kworker/23:1 21476 root 20 0 0 0 0 S 13.9 0.0 0:05.09 kworker/1:54 2204 root 20 0 0 0 0 S 12.5 0.0 1:25.17 kworker/9:10 16994 root 20 0 0 0 0 S 12.2 0.0 0:06.27 kworker/5:106 15714 root 20 0 0 0 0 R 10.9 0.0 0:01.85 kworker/19:2 9661 ceph 20 0 4246876 1.731g 18800 S 10.6 2.8 403:00.80 ceph-osd 11460 ceph 20 0 4164692 2.206g 18876 S 10.6 3.5 360:27.19 ceph-osd 9960 root 20 0 0 0 0 S 10.2 0.0 0:02.75 kworker/2:139 11699 ceph 20 0 4169244 1.920g 18920 S 10.2 3.1 355:23.67 ceph-osd 6843 ceph 20 0 4197632 1.810g 18900 S 9.6 2.9 380:08.30 ceph-osd The kernel work consumed a lot of CPU, and I found they are running journal work, The journal is reclaiming source and flush btree node with surprising frequency. Through further analysis, we found that in btree_flush_write(), we try to get a btree node with the smallest fifo idex to flush by traverse all the btree nodein c->bucket_hash, after we getting it, since no locker protects it, this btree node may have been written to cache device by other works, and if this occurred, we retry to traverse in c->bucket_hash and get another btree node. When the problem occurrd, the retry times is very high, and we consume a lot of CPU in looking for a appropriate btree node. In this patch, we try to record 128 btree nodes with the smallest fifo idex in heap, and pop one by one when we need to flush btree node. It greatly reduces the time for the loop to find the appropriate BTREE node, and also reduce the occupancy of CPU. [note by mpl: this triggers a checkpatch error because of adjacent, pre-existing style violations] Signed-off-by:
-
Tang Junhui authored
BugLink: https://bugs.launchpad.net/bugs/1784665 Sometimes, Journal takes up a lot of CPU, we need statistics to know what's the journal is doing. So this patch provide some journal statistics: 1) reclaim: how many times the journal try to reclaim resource, usually the journal bucket or/and the pin are exhausted. 2) flush_write: how many times the journal try to flush btree node to cache device, usually the journal bucket are exhausted. 3) retry_flush_write: how many times the journal retry to flush the next btree node, usually the previous tree node have been flushed by other thread. we show these statistic by sysfs interface. Through these statistics We can totally see the status of journal module when the CPU is too high. Signed-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1784665 This patch tries to release mutex bch_register_lock early, to give chance to stop cache set and bcache device early. This patch also expends time out of stopping all bcache device from 2 seconds to 10 seconds, because stopping writeback rate update worker may delay for 5 seconds, 2 seconds is not enough. After this patch applied, stopping bcache devices during system reboot or shutdown is very hard to be observed any more. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
- 12 Aug, 2019 12 commits
-
-
Jason Wang authored
This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing scsi kthread from hogging cpu which is guest triggerable. This addresses CVE-2019-3900. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 057cbf49 ("tcm_vhost: Initial merge for vhost level target fabric driver") Signed-off-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
-
Jason Wang authored
When the rx buffer is too small for a packet, we will discard the vq descriptor and retry it for the next packet: while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk, &busyloop_intr))) { ... /* On overrun, truncate and discard */ if (unlikely(headcount > UIO_MAXIOV)) { iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1); err = sock->ops->recvmsg(sock, &msg, 1, MSG_DONTWAIT | MSG_TRUNC); pr_debug("Discarded rx packet: len %zd\n", sock_len); continue; } ... } This makes it possible to trigger a infinite while..continue loop through the co-opreation of two VMs like: 1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the vhost process as much as possible e.g using indirect descriptors or other. 2) Malicious VM2 generate packets to VM1 as fast as possible Fixing this by checking against weight at the end of RX and TX loop. This also eliminate other similar cases when: - userspace is consuming the packets in the meanwhile - theoretical TOCTOU attack if guest moving avail index back and forth to hit the continue after vhost find guest just add new buffers This addresses CVE-2019-3900. Fixes: d8316f39 ("vhost: fix total length when packets are too short") Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server") Signed-off-by: -
Jason Wang authored
We used to have vhost_exceeds_weight() for vhost-net to: - prevent vhost kthread from hogging the cpu - balance the time spent between TX and RX This function could be useful for vsock and scsi as well. So move it to vhost.c. Device must specify a weight which counts the number of requests, or it can also specific a byte_weight which counts the number of bytes that has been processed. Signed-off-by:
-
Jason Wang authored
Signed-off-by:
David S. Miller <davem@davemloft.net> CVE-2019-3900 (backported from commit 272f35cb) [tyhicks: Backport to Xenial: - Minor context adjustment in net.c due to missing commit b0d0ea50 ("vhost_net: introduce helper to initialize tx iov iter") - Context adjustment in call to vhost_log_write() in hunk #4 due to missing and unneeded commit cc5e7107 ("vhost: log dirty page correctly") - Context adjustment in hunk #4 due to using break instead of goto out] Signed-off-by:
-
Paolo Abeni authored
Similar to commit a2ac9990 ("vhost-net: set packet weight of tx polling to 2 * vq size"), we need a packet-based limit for handler_rx, too - elsewhere, under rx flood with small packets, tx can be delayed for a very long time, even without busypolling. The pkt limit applied to handle_rx must be the same applied by handle_tx, or we will get unfair scheduling between rx and tx. Tying such limit to the queue length makes it less effective for large queue length values and can introduce large process scheduler latencies, so a constant valued is used - likewise the existing bytes limit. The selected limit has been validated with PVP[1] performance test with different queue sizes: queue size 256 512 1024 baseline 366 354 362 weight 128 715 723 670 weight 256 740 745 733 weight 512 600 460 583 weight 1024 423 427 418 A packet weight of 256 gives peek performances in under all the tested scenarios. No measurable regression in unidirectional performance tests has been detected. [1] https://developers.redhat.com/blog/2017/06/05/measuring-and-comparing-open-vswitch-performance/Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
haibinzhang(张海斌) authored
handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy polling udp packets with small length(e.g. 1byte udp payload), because setting VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length. Ping-Latencies shown below were tested between two Virtual Machines using netperf (UDP_STREAM, len=1), and then another machine pinged the client: vq size=256 Packet-Weight Ping-Latencies(millisecond) min avg max Origin 3.319 18.489 57.303 64 1.643 2.021 2.552 128 1.825 2.600 3.224 256 1.997 2.710 4.295 512 1.860 3.171 4.631 1024 2.002 4.173 9.056 2048 2.257 5.650 9.688 4096 2.093 8.508 15.943 vq size=512 Packet-Weight Ping-Latencies(millisecond) min avg max Origin 6.537 29.177 66.245 64 2.798 3.614 4.403 128 2.861 3.820 4.775 256 3.008 4.018 4.807 512 3.254 4.523 5.824 1024 3.079 5.335 7.747 2048 3.944 8.201 12.762 4096 4.158 11.057 19.985 Seems pretty consistent, a small dip at 2 VQ sizes. Ring size is a hint from device about a burst size it can tolerate. Based on benchmarks, set the weight to 2 * vq size. To evaluate this change, another tests were done using netperf(RR, TX) between two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was tweaked through qemu. Results shown below does not show obvious changes. vq size=256 TCP_RR vq size=512 TCP_RR size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 1/ 1/ -7%/ -2% 1/ 1/ 0%/ -2% 1/ 4/ +1%/ 0% 1/ 4/ +1%/ 0% 1/ 8/ +1%/ -2% 1/ 8/ 0%/ +1% 64/ 1/ -6%/ 0% 64/ 1/ +7%/ +3% 64/ 4/ 0%/ +2% 64/ 4/ -1%/ +1% 64/ 8/ 0%/ 0% 64/ 8/ -1%/ -2% 256/ 1/ -3%/ -4% 256/ 1/ -4%/ -2% 256/ 4/ +3%/ +4% 256/ 4/ +1%/ +2% 256/ 8/ +2%/ 0% 256/ 8/ +1%/ -1% vq size=256 UDP_RR vq size=512 UDP_RR size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 1/ 1/ -5%/ +1% 1/ 1/ -3%/ -2% 1/ 4/ +4%/ +1% 1/ 4/ -2%/ +2% 1/ 8/ -1%/ -1% 1/ 8/ -1%/ 0% 64/ 1/ -2%/ -3% 64/ 1/ +1%/ +1% 64/ 4/ -5%/ -1% 64/ 4/ +2%/ 0% 64/ 8/ 0%/ -1% 64/ 8/ -2%/ +1% 256/ 1/ +7%/ +1% 256/ 1/ -7%/ 0% 256/ 4/ +1%/ +1% 256/ 4/ -3%/ -4% 256/ 8/ +2%/ +2% 256/ 8/ +1%/ +1% vq size=256 TCP_STREAM vq size=512 TCP_STREAM size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 64/ 1/ 0%/ -3% 64/ 1/ 0%/ 0% 64/ 4/ +3%/ -1% 64/ 4/ -2%/ +4% 64/ 8/ +9%/ -4% 64/ 8/ -1%/ +2% 256/ 1/ +1%/ -4% 256/ 1/ +1%/ +1% 256/ 4/ -1%/ -1% 256/ 4/ -3%/ 0% 256/ 8/ +7%/ +5% 256/ 8/ -3%/ 0% 512/ 1/ +1%/ 0% 512/ 1/ -1%/ -1% 512/ 4/ +1%/ -1% 512/ 4/ 0%/ 0% 512/ 8/ +7%/ -5% 512/ 8/ +6%/ -1% 1024/ 1/ 0%/ -1% 1024/ 1/ 0%/ +1% 1024/ 4/ +3%/ 0% 1024/ 4/ +1%/ 0% 1024/ 8/ +8%/ +5% 1024/ 8/ -1%/ 0% 2048/ 1/ +2%/ +2% 2048/ 1/ -1%/ 0% 2048/ 4/ +1%/ 0% 2048/ 4/ 0%/ -1% 2048/ 8/ -2%/ 0% 2048/ 8/ 5%/ -1% 4096/ 1/ -2%/ 0% 4096/ 1/ -2%/ 0% 4096/ 4/ +2%/ 0% 4096/ 4/ 0%/ 0% 4096/ 8/ +9%/ -2% 4096/ 8/ -5%/ -1% Acked-by:Haibin Zhang <haibinzhang@tencent.com> Signed-off-by:
Yunfang Tai <yunfangtai@tencent.com> Signed-off-by:
Lidong Chen <lidongchen@tencent.com> Signed-off-by:
-
Willem de Bruijn authored
Vhost-net has a hard limit on the number of zerocopy skbs in flight. When reached, transmission stalls. Stalls cause latency, as well as head-of-line blocking of other flows that do not use zerocopy. Instead of stalling, revert to copy-based transmission. Tested by sending two udp flows from guest to host, one with payload of VHOST_GOODCOPY_LEN, the other too small for zerocopy (1B). The large flow is redirected to a netem instance with 1MBps rate limit and deep 1000 entry queue. modprobe ifb ip link set dev ifb0 up tc qdisc add dev ifb0 root netem limit 1000 rate 1MBit tc qdisc add dev tap0 ingress tc filter add dev tap0 parent ffff: protocol ip \ u32 match ip dport 8000 0xffff \ action mirred egress redirect dev ifb0 Before the delay, both flows process around 80K pps. With the delay, before this patch, both process around 400. After this patch, the large flow is still rate limited, while the small reverts to its original rate. See also discussion in the first link, below. Without rate limiting, {1, 10, 100}x TCP_STREAM tests continued to send at 100% zerocopy. The limit in vhost_exceeds_maxpend must be carefully chosen. With vq->num >> 1, the flows remain correlated. This value happens to correspond to VHOST_MAX_PENDING for vq->num == 256. Allow smaller fractions and ensure correctness also for much smaller values of vq->num, by testing the min() of both explicitly. See also the discussion in the second link below. Changes v1 -> v2 - replaced min with typed min_t - avoid unnecessary whitespace change Link:http://lkml.kernel.org/r/CAF=yD-+Wk9sc9dXMUq1+x_hh=3ThTXa6BnZkygP3tgVpjbp93g@mail.gmail.com Link:http://lkml.kernel.org/r/20170819064129.27272-1-den@klaipeden.comSigned-off-by:Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Jason Wang authored
This patch tries to utilize tuntap rx batching by peeking the tx virtqueue during transmission, if there's more available buffers in the virtqueue, set MSG_MORE flag for a hint for backend (e.g tuntap) to batch the packets. Reviewed-by:
-
Jason Wang authored
This patch introduces a helper which will return true if we're sure that the available ring is empty for a specific vq. When we're not sure, e.g vq access failure, return false instead. This could be used for busy polling code to exit the busy loop. Signed-off-by:
-
Colin Ian King authored
BugLink: https://launchpad.net/bugs/1839521 Sync ZFS 0.6.5.6-0ubuntu28 to Xenial: Fix shrinker deadlock with xattrs (LP: #1839521) Upstream ZFS fix 31b6111fd92a ("Kill zp->z_xattr_parent to prevent pinning") and ddae16a9cf0b ("xattr dir doesn't get purged during iput") fix a deadlock in shrinker path when a xattr directory inode and its xattr inode are in the same disposal list and the xattr dir inode is evicted before the xattr inode. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Michael Neuling authored
CVE-2019-13648 On systems like P9 powernv where we have no TM (or P8 booted with ppc_tm=off), userspace can construct a signal context which still has the MSR TS bits set. The kernel tries to restore this context which results in the following crash: Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ff #69 NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000 REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8) MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000 CFAR: c0000000000022e0 IRQMASK: 0 GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669 GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000 GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420 GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000 GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000 GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728 NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80 LR [00007fffb2d67e48] 0x7fffb2d67e48 Call Trace: Instruction dump: e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00 e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18 The problem is the signal code assumes TM is enabled when CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as with P9 powernv or if `ppc_tm=off` is used on P8. This means any local user can crash the system. Fix the problem by returning a bad stack frame to the user if they try to set the MSR TS bits with sigreturn() on systems where TM is not supported. Found with sigfuz kernel selftest on P9. This fixes CVE-2019-13648. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Reported-by:
Praveen Pandey <Praveen.Pandey@in.ibm.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org (cherry picked from commit f16d80b7) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
xiao jin authored
CVE-2018-20856 We find the memory use-after-free issue in __blk_drain_queue() on the kernel 4.14. After read the latest kernel 4.18-rc6 we think it has the same problem. Memory is allocated for q->fq in the blk_init_allocated_queue(). If the elevator init function called with error return, it will run into the fail case to free the q->fq. Then the __blk_drain_queue() uses the same memory after the free of the q->fq, it will lead to the unpredictable event. The patch is to set q->fq as NULL in the fail case of blk_init_allocated_queue(). Fixes: commit 7c94e1c1 ("block: introduce blk_flush_queue to drive flush machinery") Cc: <stable@vger.kernel.org> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
xiao jin <jin.xiao@intel.com> Signed-off-by:
-
- 07 Aug, 2019 2 commits
-
-
Denis Efremov authored
CVE-2019-14283 This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver. The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls. An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted. The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function. The bug was found by syzkaller. Signed-off-by:
Denis Efremov <efremov@ispras.ru> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit da99466a) Signed-off-by:
-
Denis Efremov authored
This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by:
Sultan Alsawaf <sultan.alsawaf@canonical.com> Acked-by:
-
- 05 Aug, 2019 21 commits
-
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1838467Signed-off-by:
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 250715a6 upstream. The syzkaller folks reported a NULL pointer dereference that seems to be cause by a race between KVM_CREATE_IRQCHIP and KVM_CREATE_PIT2. The former takes kvm->lock (except when registering the devices, which needs kvm->slots_lock); the latter takes kvm->slots_lock only. Change KVM_CREATE_PIT2 to follow the same model as KVM_CREATE_IRQCHIP. Testcase: #include <pthread.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> #include <stdint.h> #include <string.h> #include <stdlib.h> #include <sys/syscall.h> #include <unistd.h> long r[23]; void* thr1(void* arg) { struct kvm_pit_config pitcfg = { .flags = 4 }; switch ((long)arg) { case 0: r[2] = open("/dev/kvm", O_RDONLY|O_ASYNC); break; case 1: r[3] = ioctl(r[2], KVM_CREATE_VM, 0); break; case 2: r[4] = ioctl(r[3], KVM_CREATE_IRQCHIP, 0); break; case 3: r[22] = ioctl(r[3], KVM_CREATE_PIT2, &pitcfg); break; } return 0; } int main(int argc, char **argv) { long i; pthread_t th[4]; memset(r, -1, sizeof(r)); for (i = 0; i < 4; i++) { pthread_create(&th[i], 0, thr, (void*)i); if (argc > 1 && rand()%2) usleep(rand()%1000); } usleep(20000); return 0; } Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Zubin Mithra <zsm@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit ac6639cd upstream. Current code sets the dsci to 0x00000080. Which doesn't make any sense, as the indicator area is located in the _left-most_ byte. Worse: if the dsci is the _shared_ indicator, this potentially clears the indication of activity for a _different_ device. tiqdio_thinint_handler() will then have no reason to call that device's IRQ handler, and the device ends up stalling. Fixes: d0c9d4a8 ("[S390] qdio: set correct bit in dsci") Cc: <stable@vger.kernel.org> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit e54e4785 upstream. When tiqdio_remove_input_queues() removes a queue from the tiq_list as part of qdio_shutdown(), it doesn't re-initialize the queue's list entry and the prev/next pointers go stale. If a subsequent qdio_establish() fails while sending the ESTABLISH cmd, it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and tiqdio_remove_input_queues() will attempt to remove the queue entry a second time. This dereferences the stale pointers, and bad things ensue. Fix this by re-initializing the list entry after removing it from the list. For good practice also initialize the list entry when the queue is first allocated, and remove the quirky checks that papered over this omission. Note that prior to commit e5218134 ("s390/qdio: fix access to uninitialized qdio_q fields"), these checks were bogus anyway. setup_queues_misc() clears the whole queue struct, and thus needs to re-init the prev/next pointers as well. Fixes: 779e6e1c ("[S390] qdio: new qdio driver.") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Heiko Carstens authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 4f18d869 upstream. The stfle inline assembly returns the number of double words written (condition code 0) or the double words it would have written (condition code 3), if the memory array it got as parameter would have been large enough. The current stfle implementation assumes that the array is always large enough and clears those parts of the array that have not been written to with a subsequent memset call. If however the array is not large enough memset will get a negative length parameter, which means that memset clears memory until it gets an exception and the kernel crashes. To fix this simply limit the maximum length. Move also the inline assembly to an extra function to avoid clobbering of register 0, which might happen because of the added min_t invocation together with code instrumentation. The bug was introduced with commit 14375bc4 ("[S390] cleanup facility list handling") but was rather harmless, since it would only write to a rather large array. It became a potential problem with commit 3ab121ab ("[S390] kernel: Add z/VM LGR detection"). Since then it writes to an array with only four double words, while some machines already deliver three double words. As soon as machines have a facility bit within the fifth double a crash on IPL would happen. Fixes: 14375bc4 ("[S390] cleanup facility list handling") Cc: <stable@vger.kernel.org> # v2.6.37+ Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit fd5de272 upstream. As kernelci.org reports, this function is not used in vdk_hs38_defconfig: arch/arc/kernel/unwind.c:188:14: warning: 'unw_hdr_alloc' defined but not used [-Wunused-function] Fixes: bc79c9a7 ("ARC: dw2 unwind: Reinstante unwinding out of modules") Link: https://kernelci.org/build/id/5d1cae3f59b514300340c132/logs/ Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit b21629da upstream. Found by syzkaller: WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]() CPU: 3 PID: 15175 Comm: a.out Tainted: G W 4.4.6-300.fc23.x86_64 #1 Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e 0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2 00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000 Call Trace: [<ffffffff813b542e>] dump_stack+0x63/0x85 [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm] [<ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm] [<ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel] [<ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm] [<ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Testcase: #include <unistd.h> #include <sys/ioctl.h> #include <fcntl.h> #include <string.h> #include <linux/kvm.h> long r[8]; int main() { memset(r, -1, sizeof(r)); r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul); r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul); return 0; } Reported-by:
-
Milan Broz authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 2eba4e64 ] DM verity should also use DMERR_LIMIT to limit repeat data block corruption messages. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Sergej Benilov authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 8ac8a010 ] Since commit 605ad7f1 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by:
Sergej Benilov <sergej.benilov@googlemail.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit aad1dcc4 ] The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a softdep line, so that the corresponding module gets prepared gracefully. Without this, a simple inclusion to initrd via dracut failed due to the missing dependency, for example. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Petr Oros authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 2e5db6eb ] Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e ("be2net: Add link test to list of ethtool self tests.") Signed-off-by:
Petr Oros <poros@redhat.com> Reviewed-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 27e23d89 ] omap3xxx_prm_enable_io_wakeup() is marked __init, but its caller is not, so we get a warning with clang-8: WARNING: vmlinux.o(.text+0x343c8): Section mismatch in reference from the function omap3xxx_prm_late_init() to the function .init.text:omap3xxx_prm_enable_io_wakeup() The function omap3xxx_prm_late_init() references the function __init omap3xxx_prm_enable_io_wakeup(). This is often because omap3xxx_prm_late_init lacks a __init annotation or the annotation of omap3xxx_prm_enable_io_wakeup is wrong. When building with gcc, omap3xxx_prm_enable_io_wakeup() is always inlined, so we never noticed in the past. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Andrew Murray <andrew.murray@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1838467 [ Upstream commit 085ebfe9 ] perf_sample_regs_user() uses 'current->mm' to test for the presence of userspace, but this is insufficient, consider use_mm(). A better test is: '!(current->flags & PF_KTHREAD)', exec() clears PF_KTHREAD after it sets the new ->mm but before it drops to userspace for the first time. Possibly obsoletes: bf05fc25 ("powerpc/perf: Fix oops when kthread execs user process") Reported-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reported-by:
Young Xiao <92siuyang@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4018994f ("perf: Add ability to attach user level registers dump to sample") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit d17ba0f6 upstream. Driver does not want to keep packets in Tx queue when link is lost. But present code only reset NIC to flush them, but does not prevent queuing new packets. Moreover reset sequence itself could generate new packets via netconsole and NIC falls into endless reset loop. This patch wakes Tx queue only when NIC is ready to send packets. This is proper fix for problem addressed by commit 0f9e980b ("e1000e: fix cyclic resets at link up with active tx"). Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Tested-by:
Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Tested-by:
Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Sean Young authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 1287533d upstream. When building BPF code using "clang -target bpf -c", clang does not define __linux__. To build BPF IR decoders the include linux/lirc.h is needed which includes linux/types.h. Currently this workaround is needed: https://git.linuxtv.org/v4l-utils.git/commit/?id=dd3ff81f58c4e1e6f33765dc61ad33c48ae6bb07 This check might otherwise be useful to stop users from using a non-linux compiler, but if you're doing that you are going to have a lot more trouble anyway. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21149/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Vishnu DASA authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 1c2eb5b2 upstream. The VMCI handle array has an integer overflow in vmci_handle_arr_append_entry when it tries to expand the array. This can be triggered from a guest, since the doorbell link hypercall doesn't impose a limit on the number of doorbell handles that a VM can create in the hypervisor, and these handles are stored in a handle array. In this change, we introduce a mandatory max capacity for handle arrays/lists to avoid excessive memory usage. Signed-off-by:
Vishnu Dasa <vdasa@vmware.com> Reviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Christian Lamparter authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit feb09b29 upstream. This patch follows Alan Stern's recent patch: "p54: Fix race between disconnect and firmware loading" that overhauled carl9170 buggy firmware loading and driver unbinding procedures. Since the carl9170 code was adapted from p54 it uses the same functions and is likely to have the same problem, but it's just that the syzbot hasn't reproduce them (yet). a summary from the changes (copied from the p54 patch): * Call usb_driver_release_interface() rather than device_release_driver(). * Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. * During the firmware loading process, take a reference to the USB interface instead of the USB device. * Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). and * Make sure to prevent use-after-free bugs by explicitly setting the driver context to NULL after signaling the completion. Cc: <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit 7379e6ba upstream. The interrupt handler `pci230_interrupt()` causes a null pointer dereference for a PCI260 card. There is no analog output subdevice for a PCI260. The `dev->write_subdev` subdevice pointer and therefore the `s_ao` subdevice pointer variable will be `NULL` for a PCI260. The following call near the end of the interrupt handler results in the null pointer dereference for a PCI260: comedi_handle_events(dev, s_ao); Fix it by only calling the above function if `s_ao` is valid. Note that the other uses of `s_ao` in the calls `pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev, s_ao);` will never be reached for a PCI260, so they are safe. Fixes: 39064f23 ("staging: comedi: amplc_pci230: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit b8336be6 upstream. The interrupt handler `dt282x_interrupt()` causes a null pointer dereference for those supported boards that have no analog output support. For these boards, `dev->write_subdev` will be `NULL` and therefore the `s_ao` subdevice pointer variable will be `NULL`. In that case, the following call near the end of the interrupt handler results in a null pointer dereference: comedi_handle_events(dev, s_ao); Fix it by only calling the above function if `s_ao` is valid. (There are other uses of `s_ao` by the interrupt handler that may or may not be reached depending on values of hardware registers. Trust that they are reliable for now.) Note: commit 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()") propagates an earlier error from commit f21c74fa ("staging: comedi: dt282x: use cfc_handle_events()"). Fixes: 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
-
Yoshihiro Shimoda authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit b2357839 upstream. The old commit 6e4b74e4 ("usb: renesas: fix scheduling in atomic context bug") fixed an atomic issue by using workqueue for the shdmac dmaengine driver. However, this has a potential race condition issue between the work pending and usbhsg_ep_free_request() in gadget mode. When usbhsg_ep_free_request() is called while pending the queue, since the work_struct will be freed and then the work handler is called, kernel panic happens on process_one_work(). To fix the issue, if we could call cancel_work_sync() at somewhere before the free request, it could be easy. However, the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver calls free request via gether_disconnect()). For now, almost all users are having "USB-DMAC" and the DMAengine driver can be used on atomic. So, this patch adds a workaround for a race condition to call the DMAengine APIs without the workqueue. This means we still have TODO on shdmac environment (SH7724), but since it doesn't have SMP, the race condition might not happen. Fixes: ab330cf3 ("usb: renesas_usbhs: add support for USB-DMAC") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Kiruthika Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1838467 commit d29fcf70 upstream. On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash. Fixed by releasing the lock in rx_submit after port_usb is used. Fixes: 2b3d942c ("usb ethernet gadget: split out network core") Cc: <stable@vger.kernel.org> Signed-off-by:
Kiruthika Varadarajan <Kiruthika.Varadarajan@harman.com> Signed-off-by:
-
