This change prevents a fault during the repair by checking up
front if the _PRT subpackage contains the minimum number of
elements (4).
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The original code was lost accidently, it was not generated along with the
following commit of mechanism improvements and thus not get merged:

  Commit: d5a36100
  Subject: ACPICA: Add mechanism for early object repairs on a per-name basis

  Adds the framework to allow object repairs very early in the
  return object analysis. Enables repairs like string->unicode,
  etc.

This patch restores the implementation of the NULL element repair code for
ACPI_RTYPE_NONE.  In the original design, ACPI_RTYPE_NONE is defined to
collect simple NULL object repairs.
Lv Zheng.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=67901Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change enables proper handling of NULL package entries in a _PRT
return value, during construction of the PCI routing table.
Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Corrects ACPI_DISASSEMBLER to the compile conditions.  The wrong
condition was introduced by this commit:
  Commit: 3334861b
  Subject: ACPICA: Update the conditions to enable the utility resource dump strings.

This was detected in the ACPICA upstream.  Linux is not affected by the
wrong commit as the disassembler is not shipped in the Linux.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This is not an official predefined name yet, but we add it to assist
with development.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Use push and pop to both guarantee that the correct alignment is used,
and to restore the alignment to whatever it was before the header
was included.

It is reported that the #pragma pack(push/pop) directives are not supported
by the specific GCCs, but this patch still doesn't affect kernel build
as there are already #pragma pack([1]) directives used in the old ACPICA
headers, which means there shouldn't be GCCs that are currently used to
compile the ACPI kernels do not support #pragma pack() directives.

References: https://bugs.acpica.org/show_bug.cgi?id=1058Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Sometimes, there might be bugs caused by unexpected AML which is compliant
to the Windows but not compliant to the Linux implementation.

There is a predefined validation mechanism implemented in ACPICA to repair
the unexpected AML evaluation results that are caused by the unexpected
AMLs.  For example, BIOS may return misorder _CST result and the repair
mechanism can make an ascending order on the returned _CST package object
based on the C-state type.
This mechanism is quite useful to implement an AML interpreter with better
compliance with the real world where Windows is the de-facto standard and
BIOS codes are only tested on one platform thus not compliant to the
ACPI specification.

But if a compliance issue hasn't been figured out yet, it will be
difficult for developers to identify if the unexpected evaluation result
is caused by this mechanism or by the AML interpreter.
For example, _PR0 is expected to be a control method, but BIOS may use
Package: "Name(_PR0, Package(1) {P1PR})".
This boot option can disable the predefined validation mechanism so that
developers can make sure the root cause comes from the parser/executer.

This patch adds a new kernel parameter to disable this feature.

A build test has been made on a Dell Inspiron mini 1100 (i386 z530)
machine when this patch is applied and the corresponding boot test is
performed w/ or w/o the new kernel parameter specified.

References: https://bugzilla.kernel.org/show_bug.cgi?id=67901Tested-by: Fabian Wehning <fabian.wehning@googlemail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove translation protection for applications as Linux tools folder will
start to use such types.

In Linux kernel source tree, after removing this translation protection,
the u8/u16/u32/u64/s32/s64 typedefs are exposed for both __KERNEL__ builds
and !__KERNEL__ builds (tools/power/acpi) and the original definitions of
ACPI_UINT8/16/32/64_MAX are changed.

For !__KERNEL__ builds, this kind of defintions should already been tested
by the distribution vendors that are distributing binary ACPICA package and
we've achieved the successful built/run test result in the kernel source
tree.

For __KERNEL__ builds, there are 2 things affected:
1. u8/u16/u32/u64/s32/s64 type definitions:
   Since Linux has already type defined u8/u16/u32/u64/s32/s64 in
   include/uapi/asm-generic/int-ll64.h for __KERNEL__.  In order not to
   introduce build regressions where the 2 typedefs are differed,
   ACPI_USE_SYSTEM_INTTYPES is introduced to mask out ACPICA's typedefs.
   It must be defined for Linux __KERNEL__ builds.
2. ACPI_UINT8/16/32/64_MAX definitions:
   Before applying this change:
     ACPI_UINT8_MAX: sizeof (UINT8)
      UINT8: unsigned char
     ACPI_UINT16_MAX: sizeof (UINT16)
      UINT16: unsigned short
     ACPI_UINT32_MAX: sizeof (UINT32)
      INT32: int
      UINT32: unsigned int
     ACPI_UINT64_MAX: sizeof (UINT64)
      INT64: COMPILER_DEPENDENT_INT64
       COMPILER_DEPENDENT_INT64: signed long (IA64) or
                                 signed long long (IA32)
      UINT64: COMPILER_DEPENDENT_UINT64
       COMPILER_DEPENDENT_UINT64: unsigned long (IA64) or
                                  unsigned long long (IA32)
   After applying this change:
     ACPI_UINT8_MAX: sizeof (u8)
      u8: unsigned char
      UINT8: (removed from actypes.h)
     ACPI_UINT16_MAX: sizeof (u16)
      u16: unsigned short
      UINT16: (removed from actypes.h)
     ACPI_UINT32_MAX: sizeof (u32)
      INT32/UINT32: (removed from actypes.h)
      s32: signed int
      u32: unsigned int
     ACPI_UINT64_MAX: sizeof (u64)
      INT64/UINT64: (removed from actypes.h)
      u64: unsigned long long
      s64: signed long long
      COMPILER_DEPENDENT_INT64: signed long (IA64) (not used any more)
                                signed long long (IA32) (not used any more)
      COMPILER_DEPENDENT_UINT64: unsigned long (IA64) (not used any more)
                                 unsigned long long (IA32) (not used any more)
   All definitions are equal except ACPI_UINT64_MAX for CONFIG_IA64.  It
   is changed from sizeof(unsigned long) to sizeof(unsigned long long).
   By investigation, 64bit Linux kernel build is LP64 compliant, i.e.,
   sizeof(long) and (pointer) are 64.  As sizeof(unsigned long) equals to
   sizeof(unsigned long long) on IA64 platform where CONFIG_64BIT cannot be
   disabled, this change actually will not affect the value of
   ACPI_UINT64_MAX on IA64 platforms.

This patch is necessary for the ACPICA's acpidump tool to build
correctly.  Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Linux kernel resident ACPICA headers include some sparse declarators for
kernel static checkers.  This patch adds code to disable them for non
__KERNEL__ defined code so that it is possible for the ACPICA user space
tool's source files to be built with Linux kernel ACPICA header files
included.  Lv Zheng.

Linux kernel build is not affected by this commit.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This urgent patch is cherry picked from ACPICA upstream.
It is reported that some platforms fail to boot without this new _OSI
string.

This change adds this string for Windows 8.1 and Server 2012 R2.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bob Moore <Robert.Moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20140114.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If OSPMs have something should appear after actypes.h to reference type
definitions, the platform/acxxx.h is not sufficient as it is included by
platform/acenv.h before including actypes.h.

This patch introduces an OSPMs declarable headers to allow OSPMs to handle
such requirement for their own purposes.

This kind of header can also be used by Linux to collect the divergences
that haven't been back ported yet.  Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch enables resource dump functions for debugging purpose where
ACPI_DEBUG_OUTPUT is enabled.  Such functions are useful for developers
to track kernel issues when composing debugging patches.  They will be
optimized out during link stage for normal builds.

This patch updates the compilation condition used for the resource dump
related string tables to match the compilation environment used for
rsdump.c and rsdumpinfo.c.

This patch can help to improve the ACPICA release automation.  Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This command "test objects" will exercise the entire namespace by
writing new values to each data object, and ensuring that the write
was successful. The original value is then restored and verified.

This patch doesn't affect kernel behavior as the debugger is
currently not shipped in the Linux source tree.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change fixes the support to allow references (namespace nodes)
to be passed as arguments to control methods via the evaluate object
interface. This is probably most useful for testing purposes, however.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Update ACPICA copyrights to 2014. Includes all source headers and
signons for the various tools.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add the following checks:
1) The incoming device handle refers to type ACPI_TYPE_DEVICE.
2) There is not already a gpe block attached to the device.

Likewise, with acpi_remove_gpe_block, ensure that the incoming object
is a device.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The utility has the capability to load some various tables to test
features of ACPICA. However, there are enough of them that the output
of the utility became confusing. With this change, only the required
local tables are displayed (RSDP, XSDT, etc.) along with the actual
tables loaded via the command line specification. This makes the
default output simler and easier to understand. The -el command line
option restores the original behavior for testing purposes.

This patch doesn't affect kernel behavior as Linux doesn't use ACPICA
allocation tracking implementation.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Similar to the earlier tbprint.c change.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change improves the support for physical addresses in printf
debug statements and other output on both 32-bit and 64-bit hosts.
It consistently outputs the appropriate number of bytes for each
host. The %p specifier is unsatisfactory since it does not emit
uniform output on all hosts/clib implementations (on some, leading
zeros are not supported, leading to difficult-to-read output).
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull SELinux fixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  SELinux:  Fix kernel BUG on empty security contexts.
  selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types

Pull vfs fixes from Al Viro:
 "A couple of fixes, both -stable fodder.  The O_SYNC bug is fairly
  old..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a kmap leak in virtio_console
  fix O_SYNC|O_APPEND syncing the wrong range on write()

While we are at it, don't do kmap() under kmap_atomic(), *especially*
for a page we'd allocated with GFP_KERNEL.  It's spelled "page_address",
and had that been more than that, we'd have a real trouble - kmap_high()
can block, and doing that while holding kmap_atomic() is a Bad Idea(tm).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support)
when sync_page_range() had been introduced; generic_file_write{,v}() correctly
synced
	pos_after_write - written .. pos_after_write - 1
but generic_file_aio_write() synced
	pos_before_write .. pos_before_write + written - 1
instead.  Which is not the same thing with O_APPEND, obviously.
A couple of years later correct variant had been killed off when
everything switched to use of generic_file_aio_write().

All users of generic_file_aio_write() are affected, and the same bug
has been copied into other instances of ->aio_write().

The fix is trivial; the only subtle point is that generic_write_sync()
ought to be inlined to avoid calculations useless for the majority of
calls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull btrfs fixes from Chris Mason:
 "This is a small collection of fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix data corruption when reading/updating compressed extents
  Btrfs: don't loop forever if we can't run because of the tree mod log
  btrfs: reserve no transaction units in btrfs_ioctl_set_features
  btrfs: commit transaction after setting label and features
  Btrfs: fix assert screwup for the pending move stuff

Pull perf fixes from Ingo Molnar:
 "Tooling fixes, mostly related to the KASLR fallout, but also other
  fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf buildid-cache: Check relocation when checking for existing kcore
  perf tools: Adjust kallsyms for relocated kernel
  perf tests: No need to set up ref_reloc_sym
  perf symbols: Prevent the use of kcore if the kernel has moved
  perf record: Get ref_reloc_sym from kernel map
  perf machine: Set up ref_reloc_sym in machine__create_kernel_maps()
  perf machine: Add machine__get_kallsyms_filename()
  perf tools: Add kallsyms__get_function_start()
  perf symbols: Fix symbol annotation for relocated kernel
  perf tools: Fix include for non x86 architectures
  perf tools: Fix AAAAARGH64 memory barriers
  perf tools: Demangle kernel and kernel module symbols too
  perf/doc: Remove mention of non-existent set_perf_event_pending() from design.txt

When using a mix of compressed file extents and prealloc extents, it
is possible to fill a page of a file with random, garbage data from
some unrelated previous use of the page, instead of a sequence of zeroes.

A simple sequence of steps to get into such case, taken from the test
case I made for xfstests, is:

   _scratch_mkfs
   _scratch_mount "-o compress-force=lzo"
   $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar

This results in the following file items in the fs tree:

   item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160
       inode generation 6 transid 6 size 542872 block group 0 mode 100600
   item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16
       inode ref index 2 namelen 6 name: foobar
   item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
       extent data disk byte 0 nr 0 gen 6
       extent data offset 0 nr 24576 ram 266240
       extent compression 0
   item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53
       prealloc data disk byte 12849152 nr 241664 gen 6
       prealloc data offset 0 nr 241664
   item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53
       extent data disk byte 12845056 nr 4096 gen 6
       extent data offset 0 nr 20480 ram 20480
       extent compression 2
   item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53
       prealloc data disk byte 13090816 nr 405504 gen 6
       prealloc data offset 0 nr 258048

The on disk extent at offset 266240 (which corresponds to 1 single disk block),
contains 5 compressed chunks of file data. Each of the first 4 compress 4096
bytes of file data, while the last one only compresses 3024 bytes of file data.
Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 =
1072 bytes) should always return zeroes (our next extent is a prealloc one).

The solution here is the compression code path to zero the remaining (untouched)
bytes of the last page it uncompressed data into, as the information about how
much space the file data consumes in the last page is not known in the upper layer
fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing
the remainder of the page but only if it corresponds to the last page of the inode
and if the inode's size is not a multiple of the page size.

This would cause not only returning random data on reads, but also permanently
storing random data when updating parts of the region that should be zeroed.
For the example above, it means updating a single byte in the region [285648 ; 286720[
would store that byte correctly but also store random data on disk.

A test case for xfstests follows soon.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

A user reported a 100% cpu hang with my new delayed ref code.  Turns out I
forgot to increase the count check when we can't run a delayed ref because of
the tree mod log.  If we can't run any delayed refs during this there is no
point in continuing to look, and we need to break out.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>

Added in patch "btrfs: add ioctls to query/change feature bits online"
modifications to superblock don't need to reserve metadata blocks when
starting a transaction.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

The set_fslabel ioctl uses btrfs_end_transaction, which means it's
possible that the change will be lost if the system crashes, same for
the newly set features. Let's use btrfs_commit_transaction instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Wang noticed that he was failing btrfs/030 even though me and Filipe couldn't
reproduce.  Turns out this is because Wang didn't have CONFIG_BTRFS_ASSERT set,
which meant that a key part of Filipe's original patch was not being built in.
This appears to be a mess up with merging Filipe's patch as it does not exist in
his original patch.  Fix this by changing how we make sure del_waiting_dir_move
asserts that it did not error and take the function out of the ifdef check.
This makes btrfs/030 pass with the assert on or off.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

Pull pinctrl fixes from Linus Walleij:
 "First round of pin control fixes for v3.14:

   - Protect pinctrl_list_add() with the proper mutex.  This was
     identified by RedHat.  Caused nasty locking warnings was rootcased
     by Stanislaw Gruszka.

   - Avoid adding dangerous debugfs files when either half of the
     subsystem is unused: pinmux or pinconf.

   - Various fixes to various drivers: locking, hardware particulars, DT
     parsing, error codes"

* tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: tegra: return correct error type
  pinctrl: do not init debugfs entries for unimplemented functionalities
  pinctrl: protect pinctrl_list add
  pinctrl: sirf: correct the pin index of ac97_pins group
  pinctrl: imx27: fix offset calculation in imx_read_2bit
  pinctrl: vt8500: Change devicetree data parsing
  pinctrl: imx27: fix wrong offset to ICONFB
  pinctrl: at91: use locked variant of irq_set_handler

Pull irq fix from Thomas Gleixner:
 "Add a missing Kconfig dependency"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Generic irq chip requires IRQ_DOMAIN

Pull x86 fixes from Peter Anvin:
 "Quite a varied little collection of fixes.  Most of them are
  relatively small or isolated; the biggest one is Mel Gorman's fixes
  for TLB range flushing.

  A couple of AMD-related fixes (including not crashing when given an
  invalid microcode image) and fix a crash when compiled with gcov"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Unify valid container checks
  x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
  x86/efi: Allow mapping BGRT on x86-32
  x86: Fix the initialization of physnode_map
  x86, cpu hotplug: Fix stack frame warning in check_irq_vectors_for_cpu_disable()
  x86/intel/mid: Fix X86_INTEL_MID dependencies
  arch/x86/mm/srat: Skip NUMA_NO_NODE while parsing SLIT
  mm, x86: Revisit tlb_flushall_shift tuning for page flushes except on IvyBridge
  x86: mm: change tlb_flushall_shift for IvyBridge
  x86/mm: Eliminate redundant page table walk during TLB range flushing
  x86/mm: Clean up inconsistencies when flushing TLB ranges
  mm, x86: Account for TLB flushes only when debugging
  x86/AMD/NB: Fix amd_set_subcaches() parameter type
  x86/quirks: Add workaround for AMD F16h Erratum792
  x86, doc, kconfig: Fix dud URL for Microcode data

Pull jfs fix from David Kleikamp:
 "Fix regression"

* tag 'jfs-3.14-rc2' of git://github.com/kleikamp/linux-shaggy:
  jfs: fix generic posix ACL regression

I missed a couple errors in reviewing the patches converting jfs
to use the generic posix ACL function. Setting ACL's currently
fails with -EOPNOTSUPP.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `dw_wdt_drv_probe':
drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource'
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Merge tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single kernfs fix to resolve a much-reported lockdep issue
  with the removal of entries in sysfs"

* tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: make kernfs_deactivate() honor KERNFS_LOCKDEP flag