Pull gpio fixes from Bartosz Golaszewski:
 "An assortment of driver fixes and two commits addressing a bad
  behavior of the GPIO uAPI when reconfiguring requested lines.

   - fix a race condition in i2c transfers by adding a missing i2c lock
     section in gpio-pca953x

   - validate the number of obtained interrupts in gpio-davinci

   - add missing raw_spinlock_init() in gpio-graniterapids

   - fix bad character device behavior: disallow GPIO line
     reconfiguration without set direction both in v1 and v2 uAPI"

* tag 'gpio-fixes-for-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: cdev: Ignore reconfiguration without direction
  gpiolib: cdev: Disallow reconfiguration without direction (uAPI v1)
  gpio: graniterapids: Add missing raw_spinlock_init()
  gpio: davinci: Validate the obtained number of IRQs
  gpio: pca953x: fix pca953x_irq_bus_sync_unlock race

Pull arm64 fixes from Will Deacon:
 "A pair of small arm64 fixes for -rc6.

  One is a fix for the recently merged uffd-wp support (which was
  triggering a spurious warning) and the other is a fix to the clearing
  of the initial idmap pgd in some configurations

  Summary:

   - Fix spurious page-table warning when clearing PTE_UFFD_WP in a live
     pte

   - Fix clearing of the idmap pgd when using large addressing modes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Clear the initial ID map correctly before remapping
  arm64: mm: Permit PTE SW bits to change in live mappings

Pull turbostat fixes from Len Brown:
 "Fix three recent minor turbostat regressions"

* tag 'v6.10-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: Add local build_bug.h header for snapshot target
  tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
  tools/power turbostat: option '-n' is ambiguous

Fixes compilation errors for Makefile snapshot target described in:
commit 231ce08b ("tools/power turbostat: Add "snapshot:" Makefile target")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Commit 78464d76 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.

Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.

Fixes: 78464d76 ("tools/power turbostat: Add columns for clustered uncore frequency")
Signed-off-by: Adam Hawley <adam.james.hawley@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

In some cases specifying the '-n' command line argument will cause
turbostat to fail.  For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail.  This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring.  This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.

tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'

Fixes: a0e86c90 ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Pyll crypto fix from Herbert Xu:
 "Fix a build failure in qat"

* tag 'v6.10-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qat - fix linking errors when PCI_IOV is disabled

Pull drm fixes from Dave Airlie:
 "Regular fixes, mostly amdgpu with some minor fixes in other places,
  along with a fix for a very narrow UAF race in the pid handover code.

  core:
   - fix refcounting race on pid handover

  fbdev:
   - Fix fb_info when vmalloc is used, regression from
     CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.

  amdgpu:
   - SMU 14.x fix
   - vram info parsing fix
   - mode1 reset fix
   - LTTPR fix
   - Virtual display fix
   - Avoid spurious error in PSP init

  i915:
   - Fix potential UAF due to race on fence register revocation

  nouveau
   - nouveau tv mode fixes

  panel:
   - Add KOE TX26D202VM0BWA timings"

* tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel:
  drm/drm_file: Fix pid refcounting race
  drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes
  drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes
  drm/amdgpu: Don't show false warning for reg list
  drm/amdgpu: avoid using null object of framebuffer
  drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
  drm/amdgpu: Fix pci state save during mode-1 reset
  drm/amdgpu/atomfirmware: fix parsing of vram_info
  drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1
  drm/i915/gt: Fix potential UAF by revoke of fence registers
  drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA
  drm/fbdev-dma: Only set smem_start is enable per module option

<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>

filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:

process A               process B
=========               =========
                        begin drm_file_update_pid
                        mutex_lock(&dev->filelist_mutex)
                        rcu_replace_pointer(filp->pid, <pid B>, 1)
                        mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>)   *** pid B reaches refcount 0 and is freed here ***
                        get_pid(<pid B>)   *** UAF ***
                        synchronize_rcu()
                        put_pid(<pid A>)

As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.

This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().

Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.

This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.

Fixes: 1c7a387f ("drm: Update file owner during use")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-fixes-2024-06-27' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

drm/i915 fixes for v6.10-rc6:
- Fix potential UAF due to race on fence register revocation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ikxudcpd.fsf@intel.com

Pull power management fix from Rafael Wysocki:
 "Modify the intel_pstate driver to use HWP to initialize the ITMT
  scheduler extension if ACPI CPPC cannot be used for that, which is the
  case on some hybrid x86 systems (Rafael Wysocki)"

* tag 'pm-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Use HWP to initialize ITMT if CPPC is missing

Pull thermal control fix from Rafael Wysocki:
 "Replace an earlier fix for a recent regression in the Step-Wise
  thermal governor that was not effective in all of the relevant cases
  (Rafael Wysocki)"

* tag 'thermal-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_step_wise: Go straight to instance->lower when mitigation is over

Pull io_uring fixes from Jens Axboe:
 "Removal of a struct member that's unused since the 6.10 merge window,
  and a fix for a regression in SQPOLL wakeups, bringing it back to how
  it worked before the SQPOLL local task_work"

* tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux:
  io_uring: signal SQPOLL task_work with TWA_SIGNAL_NO_IPI
  io_uring: remove dead struct io_submit_state member

Pull s390 updates from Alexander Gordeev:

 - Add missing virt_to_phys() conversion for directed interrupt bit
   vectors

 - Fix broken configuration change notifications for virtio-ccw

 - Fix sclp_init() cleanup path on failure and as result - fix a list
   double add warning

 - Fix unconditional adjusting of GOT entries containing undefined weak
   symbols that resolve to zero

* tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/boot: Do not adjust GOT entries for undef weak sym
  s390/sclp: Fix sclp_init() cleanup on failure
  s390/virtio_ccw: Fix config change notifications
  s390/pci: Add missing virt_to_phys() for directed DIBV

Merge tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "These are some bugfixes for system call ABI issues I found while
  working on a cleanup series. None of these are urgent since these bugs
  have gone unnoticed for many years, but I think we probably want to
  backport them all to stable kernels, so it makes sense to have the
  fixes included as early as possible.

  One more fix addresses a compile-time warning in kallsyms that was
  uncovered by a patch I did to enable additional warnings in 6.10. I
  had mistakenly thought that this fix was already merged through the
  module tree, but as Geert pointed out it was still missing"

* tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  kallsyms: rework symbol lookup return codes
  linux/syscalls.h: add missing __user annotations
  syscalls: mmap(): use unsigned offset type consistently
  s390: remove native mmap2() syscall
  hexagon: fix fadvise64_64 calling conventions
  csky, hexagon: fix broken sys_sync_file_range
  sh: rework sync_file_range ABI
  powerpc: restore some missing spu syscalls
  parisc: use generic sys_fanotify_mark implementation
  parisc: use correct compat recv/recvfrom syscalls
  sparc: fix compat recv/recvfrom syscalls
  sparc: fix old compat_sys_select()
  syscalls: fix compat_sys_io_pgetevents_time64 usage
  ftruncate: pass a signed offset

Pull btrfs fixes from David Sterba:

 - fix quota root leak after quota disable failure

 - fix condition when checking if a zone can be added as free

 - allocate inode in NOFS context during logging or tree-log replay

 - handle raid-stripe-tree lookup correctly during scrub

* tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: fix quota root leak after quota disable failure
  btrfs: scrub: handle RST lookup error correctly
  btrfs: zoned: fix initial free space detection
  btrfs: use NOFS context when getting inodes during logging and log replay

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, bpf and netfilter.

  There are a bunch of regressions addressed here, but hopefully nothing
  spectacular. We are still waiting the driver fix from Intel, mentioned
  by Jakub in the previous networking pull.

  Current release - regressions:

   - core: add softirq safety to netdev_rename_lock

   - tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
     TFO

   - batman-adv: fix RCU race at module unload time

  Previous releases - regressions:

   - openvswitch: get related ct labels from its master if it is not
     confirmed

   - eth: bonding: fix incorrect software timestamping report

   - eth: mlxsw: fix memory corruptions on spectrum-4 systems

   - eth: ionic: use dev_consume_skb_any outside of napi

  Previous releases - always broken:

   - netfilter: fully validate NFT_DATA_VALUE on store to data registers

   - unix: several fixes for OoB data

   - tcp: fix race for duplicate reqsk on identical SYN

   - bpf:
       - fix may_goto with negative offset
       - fix the corner case with may_goto and jump to the 1st insn
       - fix overrunning reservations in ringbuf

   - can:
       - j1939: recover socket queue on CAN bus error during BAM
         transmission
       - mcp251xfd: fix infinite loop when xmit fails

   - dsa: microchip: monitor potential faults in half-duplex mode

   - eth: vxlan: pull inner IP header in vxlan_xmit_one()

   - eth: ionic: fix kernel panic due to multi-buffer handling

  Misc:

   - selftest: unix tests refactor and a lot of new cases added"

* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  net: mana: Fix possible double free in error handling path
  selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
  af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
  selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
  selftest: af_unix: Check SIGURG after every send() in msg_oob.c
  selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
  af_unix: Don't stop recv() at consumed ex-OOB skb.
  selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
  af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
  af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
  selftest: af_unix: Add msg_oob.c.
  selftest: af_unix: Remove test_unix_oob.c.
  tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  net: usb: qmi_wwan: add Telit FN912 compositions
  tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
  ionic: use dev_consume_skb_any outside of napi
  net: dsa: microchip: fix wrong register write when masking interrupt
  Fix race for duplicate reqsk on identical SYN
  ibmvnic: Add tx check to prevent skb leak
  ...

Pull sound fixes from Takashi Iwai:
 "This became bigger than usual, as it receives a pile of pending ASoC
  fixes. Most of changes are for device-specific issues while there are
  a few core fixes that are all rather trivial:

   - DMA-engine sync fixes

   - Continued MIDI2 conversion fixes

   - Various ASoC Intel SOF fixes

   - A series of ASoC topology fixes for memory handling

   - AMD ACP fix, curing a recent regression, too

   - Platform / codec-specific fixes for mediatek, atmel, realtek, etc"

* tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits)
  ASoC: rt5645: fix issue of random interrupt from push-button
  ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
  ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.
  ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
  ALSA: dmaengine_pcm: terminate dmaengine before synchronize
  ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx
  ALSA: PCM: Allow resume only for suspended streams
  ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages
  ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
  ASoC: fsl-asoc-card: set priv->pdev before using it
  ASoC: amd: acp: move chip->flag variable assignment
  ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
  ASoC: amd: acp: add a null check for chip_pdev structure
  ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64
  ASoC: q6apm-lpass-dai: close graph on prepare errors
  ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
  ASoC: topology: Fix route memory corruption
  ASoC: rt722-sdca-sdw: add debounce time for type detection
  ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback
  ...

Building with W=1 in some configurations produces a false positive
warning for kallsyms:

kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
  503 |                 strcpy(buffer, name);
      |                 ^~~~~~~~~~~~~~~~~~~~

This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.

The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.

Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.

Link: https://lore.kernel.org/lkml/20200107214042.855757-1-arnd@arndb.de/
Link: https://lore.kernel.org/lkml/20240326130647.7bfb1d92@gandalf.local.home/Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.

Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.

For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.

Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.

Fixes: a54756cb ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.

Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.

For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.

Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.

And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.

Fixes: e588bb1e ("gpio: add new SET_CONFIG ioctl() to gpio chardev")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-2-warthog618@gmail.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains two Netfilter fixes for net:

Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
	 to move the sysctl toggle to enable SRv6 netfilter hooks from
	 nf_conntrack to the core, from Jianguo Wu.

Patch #2 fixes a possible pointer leak to userspace due to insufficient
	 validation of NFT_DATA_VALUE.

Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.

netfilter pull request 24-06-27

* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================

Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.

Fixes: a69839d4 ("net: mana: Add support for auxiliary device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Kuniyuki Iwashima says:

====================
af_unix: Fix bunch of MSG_OOB bugs and add new tests.

This series rewrites the selftest for AF_UNIX MSG_OOB and fixes
bunch of bugs that AF_UNIX behaves differently compared to TCP.

Note that the test discovered few more bugs in TCP side, which
will be fixed in another series.
====================

Link: https://lore.kernel.org/r/20240625013645.45034-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.

Without fix:

  #  RUN           msg_oob.no_peek.oob ...
  # msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
  # oob: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.oob
  not ok 2 msg_oob.no_peek.oob

With fix:

  #  RUN           msg_oob.no_peek.oob ...
  #            OK  msg_oob.no_peek.oob
  ok 2 msg_oob.no_peek.oob

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.

This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).

This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.

This patch adds some test cases for SO_OOBINLINE.

Note the new test cases found two bugs in TCP.

  1) After reading OOB data with non-inline mode, we can re-read
     the data by setting SO_OOBINLINE.

  #  RUN           msg_oob.no_peek.inline_oob_ahead_break ...
  # msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
  # msg_oob.c:147:inline_oob_ahead_break:TCP     :oworld
  #            OK  msg_oob.no_peek.inline_oob_ahead_break
  ok 14 msg_oob.no_peek.inline_oob_ahead_break

  2) The head OOB data is dropped if SO_OOBINLINE is disabled
     if a new OOB data is queued.

  #  RUN           msg_oob.no_peek.inline_ex_oob_drop ...
  # msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
  # msg_oob.c:172:inline_ex_oob_drop:TCP     :y
  # msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:inline_ex_oob_drop:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.inline_ex_oob_drop
  ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.

  >>> from socket import *
  >>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
  >>> c1.send(b'hellowor', MSG_OOB)
  8
  >>> c2.recv(1, MSG_OOB)  # consume OOB data stays at middle of recvq.
  b'r'
  >>> c1.send(b'ld', MSG_OOB)
  2
  >>> c2.recv(10)          # recv() stops at the old consumed OOB
  b'hellowo'               # should be 'hellowol'

manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.

Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
  # msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
  # msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
  # ex_oob_ahead_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_ahead_break
  not ok 11 msg_oob.no_peek.ex_oob_ahead_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
  # msg_oob.c:147:ex_oob_ahead_break:TCP     :helloworl
  #            OK  msg_oob.no_peek.ex_oob_ahead_break
  ok 11 msg_oob.no_peek.ex_oob_ahead_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

While testing, I found some weird behaviour on the TCP side as well.

For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.

  #  RUN           msg_oob.no_peek.ex_oob_drop ...
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop:TCP     :Resource temporarily unavailable
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:ex_oob_drop:TCP     :Invalid argument
  #            OK  msg_oob.no_peek.ex_oob_drop
  ok 9 msg_oob.no_peek.ex_oob_drop

  #  RUN           msg_oob.no_peek.ex_oob_drop_2 ...
  # msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop_2:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.ex_oob_drop_2
  ok 10 msg_oob.no_peek.ex_oob_drop_2

This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX)
  >>> c1.send(b'hello', MSG_OOB)
  5
  >>> c1.send(b'world')
  5

and its peer recv()s "hell" and "o".

  >>> c2.recv(10)
  b'hell'
  >>> c2.recv(1, MSG_OOB)
  b'o'

Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.

Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.

  >>> c2.setblocking(False)  # This causes -EAGAIN even with available data
  >>> c2.recv(5)
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  BlockingIOError: [Errno 11] Resource temporarily unavailable

However, next recv() will return the following available data, "world".

  >>> c2.recv(5)
  b'world'

When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.

Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().

This patch also adds a test case that covers the issue.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  # msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
  # msg_oob.c:135:ex_oob_break:Expected:ld
  # msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
  # ex_oob_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_break
  not ok 8 msg_oob.no_peek.ex_oob_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  #            OK  msg_oob.no_peek.ex_oob_break
  ok 8 msg_oob.no_peek.ex_oob_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.

Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX)
  >>> c1.send(b'hello', MSG_OOB)
  5
  >>> c1.send(b'world')
  5
  >>> c2.recv(1, MSG_OOB)
  b'o'
  >>> c2.recv(9, MSG_PEEK)  # This should return b'hell'
  b'hellworld'              # even with enough buffer.

Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.

This patch also adds test cases that add recv(MSG_PEEK) before each recv().

Without fix:

  #  RUN           msg_oob.peek.oob_ahead_break ...
  # msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
  # msg_oob.c:135:oob_ahead_break:Expected:hell
  # msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
  # oob_ahead_break: Test terminated by assertion
  #          FAIL  msg_oob.peek.oob_ahead_break
  not ok 13 msg_oob.peek.oob_ahead_break

With fix:

  #  RUN           msg_oob.peek.oob_ahead_break ...
  #            OK  msg_oob.peek.oob_ahead_break
  ok 13 msg_oob.peek.oob_ahead_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.

The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.

This patch adds only a few tests with basic send() and recv() that
do not fail.

The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.

Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.

Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from

 qdisc->dev_queue->dev <NULL> ->name

This situation simulated from bunch of veths and Bluetooth disconnection
and reconnection.

During qdisc initialization, qdisc was being set to noop_queue.
In veth_init_queue, the initial tx_num was reduced back to one,
causing the qdisc reset to be called with noop, which led to the kernel
panic.

I've attached the GitHub gist link that C converted syz-execprogram
source code and 3 log of reproduced vmcore-dmesg.

 https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740

Yeoreum and I use two fuzzing tool simultaneously.

One process with syz-executor : https://github.com/google/syzkaller

 $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \
    -enable=none -collide=false log1

The other process with perf fuzzer:
 https://github.com/deater/perf_event_tests/tree/master/fuzzer

 $ perf_event_tests/fuzzer/perf_fuzzer

I think this will happen on the kernel version.

 Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10.

This occurred from 51270d57. I think this patch is absolutely
necessary. Previously, It was showing not intended string value of name.

I've reproduced 3 time from my fedora 40 Debug Kernel with any other module
or patched.

 version: 6.10.0-0.rc2.20240608gitdc772f82.29.fc41.aarch64+debug

[ 5287.164555] veth0_vlan: left promiscuous mode
[ 5287.164929] veth1_macvtap: left promiscuous mode
[ 5287.164950] veth0_macvtap: left promiscuous mode
[ 5287.164983] veth1_vlan: left promiscuous mode
[ 5287.165008] veth0_vlan: left promiscuous mode
[ 5287.165450] veth1_macvtap: left promiscuous mode
[ 5287.165472] veth0_macvtap: left promiscuous mode
[ 5287.165502] veth1_vlan: left promiscuous mode
…
[ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state
[ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0
[ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state
[ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0
[ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state
…
[ 5298.002798] bridge_slave_0: left promiscuous mode
[ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[ 5298.320207] bond0 (unregistering): Released all slaves
[ 5298.354296] hsr_slave_0: left promiscuous mode
[ 5298.360750] hsr_slave_1: left promiscuous mode
[ 5298.374889] veth1_macvtap: left promiscuous mode
[ 5298.374931] veth0_macvtap: left promiscuous mode
[ 5298.374988] veth1_vlan: left promiscuous mode
[ 5298.375024] veth0_vlan: left promiscuous mode
[ 5299.109741] team0 (unregistering): Port device team_slave_1 removed
[ 5299.185870] team0 (unregistering): Port device team_slave_0 removed
…
[ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
….
[ 5301.075531] team0: Port device team_slave_1 added
[ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5301.085588] bridge_slave_0: entered allmulticast mode
[ 5301.085800] bridge_slave_0: entered promiscuous mode
[ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state
…
[ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.193481] hsr_slave_0: entered promiscuous mode
[ 5301.204425] hsr_slave_1: entered promiscuous mode
[ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.210185] Cannot create hsr debugfs directory
[ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.255934] team0: Port device team_slave_0 added
[ 5301.256480] team0: Port device team_slave_1 added
[ 5301.256948] team0: Port device team_slave_0 added
…
[ 5301.435928] hsr_slave_0: entered promiscuous mode
[ 5301.446029] hsr_slave_1: entered promiscuous mode
[ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.455884] Cannot create hsr debugfs directory
[ 5301.502664] hsr_slave_0: entered promiscuous mode
[ 5301.513675] hsr_slave_1: entered promiscuous mode
[ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.526164] Cannot create hsr debugfs directory
[ 5301.563662] hsr_slave_0: entered promiscuous mode
[ 5301.576129] hsr_slave_1: entered promiscuous mode
[ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.580270] Cannot create hsr debugfs directory
[ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0

[ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137]
[ 5301.595877] Mem abort info:
[ 5301.595881]   ESR = 0x0000000096000006
[ 5301.595885]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 5301.595889]   SET = 0, FnV = 0
[ 5301.595893]   EA = 0, S1PTW = 0
[ 5301.595896]   FSC = 0x06: level 2 translation fault
[ 5301.595900] Data abort info:
[ 5301.595903]   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 5301.595907]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 5301.595911]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 5301.595915] [dfff800000000026] address between user and kernel address ranges
[ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP
…
[ 5301.596076] CPU: 2 PID: 102769 Comm:
syz-executor.3 Kdump: loaded Tainted:
 G        W         -------  ---  6.10.0-0.rc2.20240608gitdc772f82.29.fc41.aarch64+debug #1
[ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA,
 BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023
[ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 5301.596085] pc : strnlen+0x40/0x88
[ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596124] sp : ffff8000beef6b40
[ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001
[ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00
[ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140
[ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8
[ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006
[ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5
[ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec
[ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200
[ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1
[ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130
[ 5301.596166] Call trace:
[ 5301.596175]  strnlen+0x40/0x88
[ 5301.596179]  trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596182]  perf_trace_qdisc_reset+0xb0/0x538
[ 5301.596184]  __traceiter_qdisc_reset+0x68/0xc0
[ 5301.596188]  qdisc_reset+0x43c/0x5e8
[ 5301.596190]  netif_set_real_num_tx_queues+0x288/0x770
[ 5301.596194]  veth_init_queues+0xfc/0x130 [veth]
[ 5301.596198]  veth_newlink+0x45c/0x850 [veth]
[ 5301.596202]  rtnl_newlink_create+0x2c8/0x798
[ 5301.596205]  __rtnl_newlink+0x92c/0xb60
[ 5301.596208]  rtnl_newlink+0xd8/0x130
[ 5301.596211]  rtnetlink_rcv_msg+0x2e0/0x890
[ 5301.596214]  netlink_rcv_skb+0x1c4/0x380
[ 5301.596225]  rtnetlink_rcv+0x20/0x38
[ 5301.596227]  netlink_unicast+0x3c8/0x640
[ 5301.596231]  netlink_sendmsg+0x658/0xa60
[ 5301.596234]  __sock_sendmsg+0xd0/0x180
[ 5301.596243]  __sys_sendto+0x1c0/0x280
[ 5301.596246]  __arm64_sys_sendto+0xc8/0x150
[ 5301.596249]  invoke_syscall+0xdc/0x268
[ 5301.596256]  el0_svc_common.constprop.0+0x16c/0x240
[ 5301.596259]  do_el0_svc+0x48/0x68
[ 5301.596261]  el0_svc+0x50/0x188
[ 5301.596265]  el0t_64_sync_handler+0x120/0x130
[ 5301.596268]  el0t_64_sync+0x194/0x198
[ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842)
[ 5301.596285] SMP: stopping secondary CPUs
[ 5301.597053] Starting crashdump kernel...
[ 5301.597057] Bye!

After applying our patch, I didn't find any kernel panic errors.

We've found a simple reproducer

 # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable

 # ip link add veth0 type veth peer name veth1

 Error: Unknown device type.

However, without our patch applied, I tested upstream 6.10.0-rc3 kernel
using the qdisc_reset event and the ip command on my qemu virtual machine.

This 2 commands makes always kernel panic.

Linux version: 6.10.0-rc3

[    0.000000] Linux version 6.10.0-rc3-00164-g44ef20ba-dirty
(paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld
version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024

Kernel panic message:

[  615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[  615.237250] Dumping ftrace buffer:
[  615.237679]    (ftrace buffer empty)
[  615.238097] Modules linked in: veth crct10dif_ce virtio_gpu
virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can
xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga
uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev
videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can
omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi
lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap
stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br
dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp
llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio
ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6
Jun 22 02:36:5[3   6k152.62-4sm98k4-0k]v  kCePUr:n e1l :P IUDn:a b4le6
8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0
1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08
  615.252376] Hardware name: linux,dummy-virt (DT)
[  615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[  615.254433] pc : strnlen+0x6c/0xe0
[  615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[  615.256088] sp : ffff800080b269a0
[  615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27:
0000000000000001
[  615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24:
ffffc070f619cf60
[  615.259020] x23: 0000000000000128 x22: 0000000000000138 x21:
dfff800000000000
[  615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18:
ffffc070f448b800
[  615.261454] x17: 0000000000000000 x16: 0000000000000001 x15:
ffffc070f4ba2a90
[  615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12:
1ffff00010164d72
[  615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 :
ffffc070e85d6184
[  615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 :
000000001504a6d3
[  615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 :
0000000000000000
[  615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 :
0000000000000000
[  615.268747] Call trace:
[  615.269180]  strnlen+0x6c/0xe0
[  615.269767]  trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[  615.270716]  trace_event_raw_event_qdisc_reset+0xe8/0x4e8
[  615.271667]  __traceiter_qdisc_reset+0xa0/0x140
[  615.272499]  qdisc_reset+0x554/0x848
[  615.273134]  netif_set_real_num_tx_queues+0x360/0x9a8
[  615.274050]  veth_init_queues+0x110/0x220 [veth]
[  615.275110]  veth_newlink+0x538/0xa50 [veth]
[  615.276172]  __rtnl_newlink+0x11e4/0x1bc8
[  615.276944]  rtnl_newlink+0xac/0x120
[  615.277657]  rtnetlink_rcv_msg+0x4e4/0x1370
[  615.278409]  netlink_rcv_skb+0x25c/0x4f0
[  615.279122]  rtnetlink_rcv+0x48/0x70
[  615.279769]  netlink_unicast+0x5a8/0x7b8
[  615.280462]  netlink_sendmsg+0xa70/0x1190

Yeoreum and I don't know if the patch we wrote will fix the underlying
cause, but we think that priority is to prevent kernel panic happening.
So, we're sending this patch.

Fixes: 51270d57 ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string")
Link: https://lore.kernel.org/lkml/20240229143432.273b4871@gandalf.local.home/t/
Cc: netdev@vger.kernel.org
Tested-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20240624173320.24945-4-yskelg@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'amd-drm-fixes-6.10-2024-06-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-06-26:

amdgpu:
- SMU 14.x fix
- vram info parsing fix
- mode1 reset fix
- LTTPR fix
- Virtual display fix
- Avoid spurious error in PSP init
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626221408.2019633-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2024-06-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-fixes for v6.10-rc6:
- nouveau tv mode fixes.
- Add KOE TX26D202VM0BWA timings.
- Fix fb_info when vmalloc is used, regression from
  CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e596c1e-9389-43c2-a029-06fe741c44c3@linux.intel.com

Merge tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "13 hotfixes, 7 are cc:stable.

  All are MM related apart from a MAINTAINERS update. There is no
  identifiable theme here - just singleton patches in various places"

* tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/memory: don't require head page for do_set_pmd()
  mm/page_alloc: Separate THP PCP into movable and non-movable categories
  nfs: drop the incorrect assertion in nfs_swap_rw()
  mm/migrate: make migrate_pages_batch() stats consistent
  MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
  selftests/mm:fix test_prctl_fork_exec return failure
  mm: convert page type macros to enum
  ocfs2: fix DIO failure due to insufficient transaction credits
  kasan: fix bad call to unpoison_slab_object
  mm: handle profiling for fake memory allocations during compaction
  mm/slab: fix 'variable obj_exts set but not used' warning
  /proc/pid/smaps: add mseal info for vma
  mm: fix incorrect vbq reference in purge_fragmented_block

register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.

Fixes: 96518518 ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>