- 20 Apr, 2010 1 commit
-
-
Paul Mundt authored
Previously the struct module definition was pulled in from other headers, but we want the reference to be explicit. Fixes up randconfig build issues. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 19 Apr, 2010 2 commits
-
-
Paul Mundt authored
This enables support for the hardware synonym avoidance handling on SH-X3 CPUs for the case where dcache aliases are possible. icache handling is retained, but we flip on broadcasting of the block invalidations due to the lack of coherency otherwise on SMP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This wires up power-off support for the SDK7786 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 15 Apr, 2010 2 commits
-
-
Paul Mundt authored
This implements support for hardware-managed IRQ balancing as implemented by SH-X3 cores (presently only hooked up for SH7786, but can probably be carried over to other SH-X3 cores, too). CPUs need to specify their distribution register along with the mask definitions, as these follow the same format. Peripheral IRQs that don't opt out of balancing will be automatically distributed at the whim of the hardware block, while each CPU needs to verify whether it is handling the IRQ or not, especially before clearing the mask. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Make sure that the timer IRQs and IPIs aren't enabled for IRQ balancing. IPIs are disabled as a result of being percpu while the timers simply disable balancing outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 13 Apr, 2010 4 commits
-
-
Paul Mundt authored
This adds support for hardware-assisted userspace irq masking for special priority levels. Due to the SR.IMASK interactivity, only some platforms implement this in hardware (including but not limited to SH-4A interrupt controllers, and ARM-based SH-Mobile CPUs). Each CPU needs to wire this up on its own, for now only SH7786 is wired up as an example. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The printk loglevels are all over the place, make them a bit more coherent, and add some registration notification while we're at it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Presently the sysdevs are simply numbered based on the list position, without having any direct way of figuring out which controller these are actually mapping to. This provides a name attr for mapping out the chip name. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Hook up DMAC0 on SH7786. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 07 Apr, 2010 1 commit
-
-
Paul Mundt authored
Presently address translation is default-enabled regardless of whether CONFIG_MMU is set or not in the SH-4 case, this fixes it up, and also makes the control init word a bit more readable in the process. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 05 Apr, 2010 1 commit
-
-
Paul Mundt authored
-
- 04 Apr, 2010 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunxvr500: Ignore secondary output PCI devices. sparc64: Implement perf_arch_fetch_caller_regs sparc64: Update defconfig. sparc64: Fix array size reported by vmemmap_populate() sparc: Fix regset register window handling. drivers/serial/sunsu.c: Correct use after free
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Always build the powerpc perf_arch_fetch_caller_regs version perf: Always build the stub perf_arch_fetch_caller_regs version perf, probe-finder: Build fix on Debian perf/scripts: Tuple was set from long in both branches in python_process_event() perf: Fix 'perf sched record' deadlock perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernels perf, x86: Fix AMD hotplug & constraint initialization x86: Move notify_cpu_starting() callback to a later stage x86,kgdb: Always initialize the hw breakpoint attribute perf: Use hot regs with software sched switch/migrate events perf: Correctly align perf event tracing buffer
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: set_cpus_allowed_ptr(): Don't use rq->migration_thread after unlock sched: Fix proc_sched_set_task()
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring-buffer: Add missing unlock tracing: Fix lockdep warning in global_clock()
-
KAMEZAWA Hiroyuki authored
In initial design, walk_page_range() was designed just for walking page table and it didn't require mmap_sem. Now, find_vma() etc.. are used in walk_page_range() and we need mmap_sem around it. This patch adds mmap_sem around walk_page_range(). Because /proc/<pid>/pagemap's callback routine use put_user(), we have to get rid of it to do sane fix. Changelog: 2010/Apr/2 - fixed start_vaddr and end overflow Changelog: 2010/Apr/1 - fixed start_vaddr calculation - removed unnecessary cast. - removed unnecessary change in smaps. - use GFP_TEMPORARY instead of GFP_KERNEL Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Matt Mackall <mpm@selenic.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: San Mehat <san@google.com> Cc: Brian Swetland <swetland@google.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> [ Fixed kmalloc failure return code as per Matt ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
These just represent the secondary and further heads attached to the card, and they have different sets of PCI bar registers to map. So don't try to drive them in the main driver. Reported-by: Frans van Berckel <fberckel@xs4all.nl> Tested-by: Frans van Berckel <fberckel@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We provide regs->tstate, regs->tpc, regs->tnpc and regs->u_regs[UREG_FP]. regs->tstate is necessary for: user_mode() (via perf_exclude_event()) perf_misc_flags() (via perf_prepare_sample()) regs->tpc is necessary for: perf_instruction_pointer() (via perf_prepare_sample()) and regs->u_regs[UREG_FP] is necessary for: perf_callchain() (via perf_prepare_sample()) The regs->tnpc value is provided just to be tidy. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Apr, 2010 12 commits
-
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Ben Hutchings authored
vmemmap_populate() attempts to report the used index and total size of vmemmap_table, but it wrongly shifts the total size so that it is always shown as 0. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frederic Weisbecker authored
Now that software events use perf_arch_fetch_caller_regs() too, we need the powerpc version to be always built. Fixes the following build error: (.text+0x3210): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x3324): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x33bc): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x33ec): undefined reference to `perf_arch_fetch_caller_regs' (.text+0xd4a0): undefined reference to `perf_arch_fetch_caller_regs' arch/powerpc/kernel/built-in.o:(.text+0xd528): more undefined references to `perf_arch_fetch_caller_regs' follow make[1]: *** [.tmp_vmlinux1] Error 1 make: *** [sub-make] Error 2 Reported-by: Michael Ellerman <michael@ellerman.id.au> Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org>
-
Frederic Weisbecker authored
Now that software events use perf_arch_fetch_caller_regs() too, we need the stub version to be always built in for archs that don't implement it. Fixes the following build error in PARISC: kernel/built-in.o: In function `perf_event_task_sched_out': (.text.perf_event_task_sched_out+0x54): undefined reference to `perf_arch_fetch_caller_regs' Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5965/1: Fix soft lockup in at91 udc driver ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds ARM: 6005/1: arm: kprobes: fix register corruption with jprobes ARM: 6003/1: removing compilation warning from pl061.h ARM: 6001/1: removing compilation warning comming from clkdev.h ARM: 6000/1: removing compilation warning comming from <asm/irq.h> ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h ARM: 5997/1: ARM: Correct the VFPv3 detection ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4) ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4) ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4) ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them powerpc/fsl: add device tree binding for QE firmware of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree
-
Linus Torvalds authored
Merge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: reiserfs: Fix locking BUG during mount failure
-
Clemens Ladisch authored
The missing initialization of the nb_cntl.strap_msi_enable does not seem to be the only problem that prevents MSI, so that quirk is not sufficient to enable MSI on all machines. To be safe, disable MSI unconditionally for the internal graphics and HDMI audio on these chipsets. [rjw: Added the PCI_VENDOR_ID_AI quirk.] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds authored
* 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: Turn off tracing while in the debugger kgdb: use atomic_inc and atomic_dec instead of atomic_set kgdb: eliminate kgdb_wait(), all cpus enter the same way kgdbts,sh: Add in breakpoint pc offset for superh kgdb: have ebin2mem call probe_kernel_write once
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: Freezer: Fix buggy resume test for tasks frozen with cgroup freezer Freezer: Only show the state of tasks refusing to freeze
-
Oleg Nesterov authored
release_one_tty(tty) can be called when tty still has a reference to pgrp/session. In this case we leak the pid. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Apr, 2010 10 commits
-
-
Borislav Petkov authored
Building chokes with: In file included from /usr/include/gelf.h:53, from /usr/include/elfutils/libdw.h:53, from util/probe-finder.h:61, from util/probe-finder.c:39: /usr/include/libelf.h:98: error: expected specifier-qualifier-list before 'off64_t' [...] Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <20100329164755.GA16034@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Jason Wessel authored
The kernel debugger should turn off kernel tracing any time the debugger is active and restore it on resume. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
-
Jason Wessel authored
Memory barriers should be used for the kgdb cpu synchronization. The atomic_set() does not imply a memory barrier. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
-
Jason Wessel authored
This is a kgdb architectural change to have all the cpus (master or slave) enter the same function. A cpu that hits an exception (wants to be the master cpu) will call kgdb_handle_exception() from the trap handler and then invoke a kgdb_roundup_cpu() to synchronize the other cpus and bring them into the kgdb_handle_exception() as well. A slave cpu will enter kgdb_handle_exception() from the kgdb_nmicallback() and set the exception state to note that the processor is a slave. Previously the salve cpu would have called kgdb_wait(). This change allows the debug core to change cpus without resuming the system in order to inspect arch specific cpu information. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
-
Jason Wessel authored
The kgdb test suite mimics the behavior of gdb. For the sh architecture the pc must be decremented by 2 for software breakpoint. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Paul Mundt <lethal@linux-sh.org>
-
Jason Wessel authored
Rather than call probe_kernel_write() one byte at a time, process the whole buffer locally and pass the entire result in one go. This way, architectures that need to do special handling based on the length can do so, or we only end up calling memcpy() once. [sonic.zhang@analog.com: Reported original problem and preliminary patch] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
-
Tom Zanussi authored
This is a fix to the signed/unsigned field handling in the Python scripting engine, based on a patch from Roel Kluin. Basically, Python wants to use a PyInt (which is internally a long) if it can i.e. if the value will fit into that type. If not, it stores it into a PyLong, which isn't actually a long, but an arbitrary-precision integer variable. The code below is similar to to what Python does internally, and it seems to work as expected on the x86 and x86_64 sytems I tested it on. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: rostedt@goodmis.org LKML-Reference: <1270184305.6422.10.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Oleg Nesterov authored
Trivial typo fix. rq->migration_thread can be NULL after task_rq_unlock(), this is why we have "mt" which should be used instead. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100330165829.GA18284@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Mike Galbraith authored
Latencytop clearing sum_exec_runtime via proc_sched_set_task() breaks task_times(). Other places in kernel use nvcsw and nivcsw, which are being cleared as well, Clear task statistics only. Reported-by: Török Edwin <edwintorok@gmail.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1269940193.19286.14.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Mike Galbraith authored
perf sched record can deadlock a box should the holder of handle->data->lock take an interrupt, and then attempt to acquire an rq lock held by a CPU trying to acquire the same lock. Disable interrupts. CPU0 CPU1 sched event with rq->lock held grab handle->data->lock spin on handle->data->lock interrupt try to grab rq->lock Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Tested-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1269598293.6174.8.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-