- 04 Sep, 2019 40 commits
-
-
Stephen Boyd authored
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-45-swboyd@chromium.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Smirnov authored
Last steps of .shutdown() code are identical for lpuart and lpuart32 cases, so move it all into a standalone subroutine. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-imx@nxp.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190729195226.8862-19-andrew.smirnov@gmail.comSigned-off-by:
-
Andrey Smirnov authored
By the time lpuart_shutdown() calls lpuart_stop_tx() UARTCR2_TE and UARTCR2_TIE (which the latter will clear) are already cleared, so that function call should effectively be a no-op. Moreso, lpuart_stop_tx() is expected to be executed with port spinlock held, which the caller doesn't. Given all that, drop the call to lpuart_stop_tx() in lpuart_shutdown(). In case of lpuart32_shutdown()/lpuart32_stop_tx(), TIE won't even be set if lpuart_dma_tx_use is true. Drop it there as well. Signed-off-by:
-
Andrey Smirnov authored
The check for uart_circ_empty(xmit) || uart_tx_stopped(&sport->port) appears in multiple places in the driver. Move it into a helper function. Signed-off-by: -
Andrey Smirnov authored
Use cpu_relax() instead of barrier() in a tight polling loops to make them a bit more idiomatic. Should also improve things on ARM64 a bit since cpu_relax() will expand into "yield" instruction there. Signed-off-by:
-
Andrey Smirnov authored
Busy polling on a bit in a register is used in multiple places in the driver. Move it into a shared function. Signed-off-by:
-
Andrey Smirnov authored
When dealing with 32-bit variant of LPUART IP block appropriate I/O helpers have to be used to properly deal with endianness differences. Change all of the offending code to do that. Fixes: a5fa2660 ("tty/serial/fsl_lpuart: Add CONSOLE_POLL support for lpuart32.") Signed-off-by:
-
Andrey Smirnov authored
Clearing CSTOPB bit if it is set is functionally equivalent to jsut clearing it unconditionally. Drop unnecessary check. Signed-off-by:
-
Andrey Smirnov authored
Drop unnecessary extra parenthesis in the driver. Signed-off-by:
-
Andrey Smirnov authored
The check for termios->c_cflag & CRTSCTS ensure that if we reach else branch, CRTSCTS in termios->c_cflag is already going to be cleard. Doing so explicitly there is not necessary. Drop it. Signed-off-by:
-
Andrey Smirnov authored
While sharing code for Tx interrupt handler between 8 and 32 bit variant of the peripheral saves a bit of code duplication it also adds quite a number of lpuart_is_32() checks which makes it harder to understand. Move shared bits back into corresponding lpuart*_transmit_buffer functions, split lpuart_txint into lpuart_txint and lpuart32_txint so we can drop all extra lpuart_is_32() check and make the code flow more linear. Signed-off-by:
-
Andrey Smirnov authored
Although I haven't observed this bug in practice, it seems that the code for handling x_char of LPUART is pretty much identical to that of i.MX. So the fix found in commit 7e2fb5aa ("serial: imx: Fix issue in software flow control"): serial: imx: Fix issue in software flow control After send out x_char in UART driver, x_char needs to be cleared by UART driver itself, otherwise data in TXFIFO can no longer be sent out. Also tx counter needs to be increased to keep track of correct number of transmitted data. Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Signed-off-by:
-
Andrey Smirnov authored
Uart_write_wakeup() will already be called as a part of lpuart*_transmit_buffer() call, so there doesn't seem to be a reason to call it again right after. It also appears that second uart_write_wakeup() might potentially cause unwanted write wakeup when transmitting an x_char. See commit 5e42e9a3 ("serial: imx: Fix x_char handling and tx flow control") where this problem was fixed in a very similarly structured i.MX UART driver. Signed-off-by:
-
Andrey Smirnov authored
Fix bogus indentation in rx_dma_timer_init(). Signed-off-by:
-
Andrey Smirnov authored
It appears that lpuart_rxint, lpuart_txint and lpuart32_rxint were modelled after identical function found in UART driver for i.MX. However, while said functions are used as individual IRQ handlers in i.MX driver (in case of i.MX1), it is not the case for LPUART. Given that, there's no need for us to restrict the prototype of the handler to irqreturn_t foo(int, void *) and we can drop all of uneened boilerplate code by changing it void foo(struct lpuart_port *). Signed-off-by:
-
Andrey Smirnov authored
Switching baud rate might cause bogus data to appear in HW FIFO. Add code to do a HW FIFO flush to .flush_buffer callback to avoid that. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Stefan Agner authored
After overruns the FIFO pointers become misaligned. This typically shows by characters still being stuck in the FIFO despite the empty flag being asserted. After the first assertion of the overrun flag the empty flag still seems to indicate FIFO state correctly and all data can be read. However, after another overrun assertion the FIFO seems to be off by one such that the last received character is still in the FIFO (despite the empty flag being asserted). Flushing the receive FIFO reinitializes pointers. Hence it is recommended to flush the FIFO after overruns, see also: https://community.nxp.com/thread/321175 Hence, on assertion of the overrun flag read the remaining data from the FIFO and flush buffers. Signed-off-by:
Stefan Agner <stefan.agner@toradex.com> Acked-by:
Max Krummenacher <max.krummenacher@toradex.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-imx@nxp.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190729195226.8862-3-andrew.smirnov@gmail.comSigned-off-by:
-
Stefan Agner authored
When using DMA framing error get cleared properly. However, due to the additional read from the data register, an underflow in the receive FIFO buffer occurs (the FIFO pointer gets out of sync). Clear the FIFO in case an underflow has occurred. Also disable the receiver during this operation and when reading the data register to minimize potential interference. Signed-off-by:
-
Sergey Organov authored
Called in only one place, for RS232, it only obscures things, as it doesn't go well with 2 similar named functions, imx_uart_rts_inactive() and imx_uart_rts_active(), that both are RS485-specific. Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1564167161-3972-4-git-send-email-sorganov@gmail.comSigned-off-by:
-
Sergey Organov authored
imx_uart_set_mctrl() happened to set UCR2_CTSC bit whenever TIOCM_RTS was set, no matter if RTS/CTS handshake is enabled or not. Now fixed by turning handshake on only when CRTSCTS bit for the port is set. Reviewed-by:
-
Sergey Organov authored
Don't let receiver hardware automatically control RTS output if it was requested to be inactive. To ensure this, set_termios() shouldn't set UCR2_CTSC bit if UCR2_CTS (=TIOCM_RTS) is cleared. Added corresponding check in imx_uart_rts_auto() to fix this. Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
-
Andy Shevchenko authored
The established way to provide PM callbacks is through struct dev_pm_ops which is more generic. Convert driver to use it instead of legacy approach. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190726172817.73253-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Je Yen Tam authored
Add support for NI-Serial PXIe-RS232, PXI-RS485 and PXIe-RS485 devices. Signed-off-by:
Je Yen Tam <je.yen.tam@ni.com> Link: https://lore.kernel.org/r/20190726074012.2590-1-je.yen.tam@ni.comSigned-off-by:
-
Erwan Le Ray authored
Use __maybe_unused for power management related functionsinstead of fixes: 270e5a74 ("serial: stm32: add wakeup mechanism") Signed-off-by:
Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/1560433800-12255-6-git-send-email-erwan.leray@st.comSigned-off-by:
-
Erwan Le Ray authored
Use pm_runtime for clock management. Signed-off-by:
Bich Hemon <bich.hemon@st.com> Signed-off-by:
-
Erwan Le Ray authored
Select either pinctrl sleep state in suspend function or default state in resume function. Signed-off-by:
-
Erwan Le Ray authored
Add a note for enabling wakeup capabilities of usart Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1560433800-12255-2-git-send-email-erwan.leray@st.comSigned-off-by:
-
Navid Emamdoost authored
pci_ioremap_bar may return null. This is eventually de-referenced at drivers/dma/dw/core.c:1154 and drivers/dma/dw/core.c:1168. A null check is needed to prevent null de-reference. I am adding the check and in case of failure. Thanks to Andy Shevchenko for the hint on the necessity of pci_iounmap when exiting. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20190719174848.24216-1-navid.emamdoost@gmail.comSigned-off-by:
-
Fugang Duan authored
VF610/LS1021a/i.MX7ULP/i.MX8QXP reference manual describe the TXFIFOSIZE/RXFIFOSIZE field as below. 000b - FIFO/Buffer depth = 1 dataword. 001b - FIFO/Buffer depth = 4 datawords. 010b - FIFO/Buffer depth = 8 datawords. 011b - FIFO/Buffer depth = 16 datawords. 100b - FIFO/Buffer depth = 32 datawords. 101b - FIFO/Buffer depth = 64 datawords. 110b - FIFO/Buffer depth = 128 datawords. 111b - FIFO/Buffer depth = 256 datawords. (Reserved for VF610) So the FIFO depth should be: 0x1 << (val ? (val + 1) : 0) Signed-off-by:
-
Fugang Duan authored
Since .sg_init_one() already set sg entry page like below code. sg_init_one() sg_init_table(sg, 1); sg_set_buf(sg, buf, buflen); So it should not set sg entry page again, remove the redundant code. Signed-off-by:
-
Fugang Duan authored
Use kzalloc() instead of kmalloc() to get clean rx buffer that is useful for DMA mode debug to check the data moving validity. Signed-off-by:
-
Fugang Duan authored
Add earlycon support for imx8qxp platform. Signed-off-by:
-
Fugang Duan authored
By default, .of_dma_configure() init dev.coherent_dma_mask to BIT(32) that match the eDMA address range. If re-init dev.coherent_dma_mask to zero, then streaming dma mapping will go swiotlb dma_map, if swiotlb is not initalized then it causes mapping failed. Signed-off-by:
-
Andy Shevchenko authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Signed-off-by:
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20190724131825.1875-1-hslester96@gmail.comSigned-off-by:
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
-
Colin Ian King authored
The variable word_count is being assigned a value that is never read before a return, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20190723150314.14513-1-colin.king@canonical.comSigned-off-by:
-
Fuqian Huang authored
pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190715032001.7212-1-huangfq.daxian@gmail.comSigned-off-by:
-
Joe Perches authored
Use the typical style of array, not the equivalent &array[0]. Signed-off-by:
Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/1be432798311378947ec4e6051cad1235b6eccbb.1562283944.git.joe@perches.comSigned-off-by:
-
Tony Lindgren authored
For many years omap variants have been setting the runtime PM autosuspend delay to -1 to prevent unsafe policy with lossy first character on wake-up. The user must specifically enable the timeout for UARTs if desired. We must not enable the workaround for serdev devices though. It leads into UARTs not idling if no serdev devices are loaded and there is no sysfs entry to configure the UART in that case. And this means that my PM may not work unless the serdev modules are loaded. We can detect a serdev device being configured based on a dts child node, and we can simply skip the workround in that case. And the serdev driver can idle the port during runtime when suitable if an out-of-band wake-up GPIO line exists for example. Let's also add some comments to the workaround while at it. Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20190723115400.46432-1-tony@atomide.comSigned-off-by:
-
