- 02 Aug, 2018 4 commits
-
-
Steve Longerbeam authored
Adds crtc page-flip support by passing the new requested framebuffer to vbox_crtc_do_set_base(). Note there is no attempt to support vblank interrupts, it's not not known how to do this in VBOX or if it is even possible. Since this page-flip implementation does not try to sync the page-flip to vertical blanking, tearing effects are possible. Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve Longerbeam authored
This modifies vbox_crtc_do_set_base() to take a new framebuffer to be activated, instead of the existing framebuffer attached to the crtc. This change allows the function to be given the new framebuffer from a page-flip request. Signed-off-by:
-
Ivan Bornyakov authored
Add handling of possible allocation failure. Reported by smatch: drivers/staging/gasket/gasket_sysfs.c:105 put_mapping() error: potential null dereference 'files_to_remove'. (kcalloc returns null) Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.19c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of IIO new device support, cleanups and features for the 4.19 cycle. This is a somewhat sneaky late pull request given Linus has announced a likely 1 week delay. If it is too late I'll resend after the merge window. I merged in the fixes branch as those are primarily around things queued for the merge window. Particulary good to see the output of our Himanshu Jha, a GSOC student who developed the bme680 driver. New device support: * bme680 gas sensor (with temperature, humidity and pressure) - new driver to support this device * vcn4000 - support vcnl4200 (lots of rework to allow this) - ids added for VCNL4010 and VCNL4020 sensors New features: * ad9523 - support the various external signal options via gpios. Cleanups and fixes * ad_sigma_delta - unsigned long for a timeout. * ad9523 - fix a wrong return value that was indicating successful write failed and might lead to an infinite loop. * si1133 - fix an impossible test. - fix an uninitialsed variable by reading from the device in all paths. * xilinx xadc - check for return values in clk related functions - limit the pcap clock frequency to supported ranges. - stash the irq to avoid calling platform_get_irq from the remove path. - ensure the irq is actually requested before we enable the hardware to output it.
-
- 01 Aug, 2018 21 commits
-
-
Todd Poynor authored
The include guard symbol for gasket_page_table.h is out-of-date. Signed-off-by:
Todd Poynor <toddpoynor@google.com> Signed-off-by:
-
Todd Poynor authored
gasket_free_dev() is called only from driver PCI probe and remove function. It is guaranteed that that pci_dev structure is not going anywhere during that time; there is no need to take this additional reference. This reverts commit dd9d1502. Reported-by:
Dmitry Torokhov <dtor@chromium.org> Signed-off-by:
-
Todd Poynor authored
When gasket core was converted from using capable() to use ns_capable() instead, the type of the variable holding the result should have been converted from int to bool. Reported-by:
-
Todd Poynor authored
apex.h is supposed to contain kernel-userspace interface definitions, but has a number of defines that are only used by apex_driver.c or are not used at all. Move driver implementation defines not shared with userspace to the driver source. Remove unused defines. Signed-off-by:
-
Todd Poynor authored
Multi-line alignment formatting issues fixed, remove the TODO entry for this. Signed-off-by:
-
Todd Poynor authored
Fix multi-line alignment formatting to look like: int ret = long_function_name(device, VARIABLE1, VARIABLE2, VARIABLE3, VARIABLE4); Signed-off-by: -
Todd Poynor authored
Fix multi-line alignment formatting to look like: int ret = long_function_name(device, VARIABLE1, VARIABLE2, VARIABLE3, VARIABLE4); Signed-off-by: -
Todd Poynor authored
Fix multi-line alignment formatting to look like: int ret = long_function_name(device, VARIABLE1, VARIABLE2, VARIABLE3, VARIABLE4); Many of these TODO items were previously cleaned up during the conversion to standard logging functions. Signed-off-by: -
Todd Poynor authored
Fix multi-line alignment formatting to look like: int ret = long_function_name(device, VARIABLE1, VARIABLE2, VARIABLE3, VARIABLE4); Many of these TODO items were previously cleaned up during the conversion to standard logging functions. Signed-off-by: -
Todd Poynor authored
Fix multi-line alignment formatting to look like: int ret = long_function_name(device, VARIABLE1, VARIABLE2, VARIABLE3, VARIABLE4); Signed-off-by: -
Todd Poynor authored
The static function declarations are removed, remove the TODO file entry for this. Signed-off-by:
-
Todd Poynor authored
Remove forward declarations of static functions, move code to avoid forward references, for kernel style. Signed-off-by:
-
Todd Poynor authored
Remove forward declarations of static functions, move code to avoid forward references, for kernel style. Signed-off-by:
-
Todd Poynor authored
Remove forward declarations of static functions, move code to avoid forward references, for kernel style. Signed-off-by:
-
Todd Poynor authored
Remove forward declarations of static functions, move code to avoid forward references, for kernel style. Signed-off-by:
-
Maxime Roussin-Bélanger authored
Read response register to detect any error. Signed-off-by:
Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
zhong jiang authored
we prefer to use dma_zalloc_coherent rather than dam_alloc_coherent+memset Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Jonathan Cameron authored
-
Greg Kroah-Hartman authored
There's not been any work on this driver since it was originally merged, and it really needs to be rewritten to use the serdev layer instead if people really need/want it. Reported-by:
Christoph Hellwig <hch@lst.de> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Gao Xiang authored
There is no need to '#if CONFIG_EROFS_FS_XATTR' in xattr.c, let's remove it. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Gao Xiang authored
This patch adds a missing break after adding the default case. Reviewed-by:
-
- 30 Jul, 2018 15 commits
-
-
Colin Ian King authored
The current check on val always results in true and so the call to sii1133_update_adcsens never gets called. Fix this check so it returns with -EINVAL only when val is not zero and not one. Detected by CoverityScan, CID#1472099 ("Logically dead code") Fixes: e01e7eaf ("iio: light: introduce si1133") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
John Whitmore authored
The enumerated type DM_CCK_Rx_Path_Method is used as a container for constant definitions, rather then an enumerated type enabling compiler type checking. To correct this, the variable which uses the constants, defined by the enumeration, has had its type changed from a u8 to the enumeration. Additionally the type has been moved above the structure where the type is used, to avoid compiler error. The typedef has been removed from the enumerated type to clear the checkpatch issue with defining new types. The name of the type has been changed to cck_rx_path_method to clear the checkpatch issue with CamelCase naming. And the enumerated constant CCK_Rx_Version_MAX has been removed, since it is never used in code. The changes are all coding style in nature and so should have no impact on runtime code execution. Signed-off-by:
John Whitmore <johnfwhitmore@gmail.com> Signed-off-by:
-
John Whitmore authored
The enumerated type dm_dig_cs_ratio_e is never actually used as a type, but only as a collection of related constants. This is because the variables, which use the defined constant values, are defined as being of type u8 rather then tne enumerated type. This omission negates the possibility of taking advantage of compiler type checking. To enable the use of compiler type checking of the enumeration the two variables, (curcs_ratio_state & precs_ratio_state), which use the type's constants have their types changed from u8 to enum dig_cck_cs_ratio_state. Additionally the types declaration has been moved above the dig structure, where the type is used. The 'typedef' keyword has been removed from the type to clear the checkpatch issue with defining new types. And the constant DIG_CS_MAX has been removed since this is never used in the code. These changes are purely coding style changes and should not impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
The enumerated type dm_dig_pd_th_e is never actually used as the type for the two variables which use the constants, which the enumeration defines. This omission removes the possibility of taking advantage of compiler type checking. To correct this the two member variables, (curpd_thstate & prepd_thstate) have been changed to use the type enum dig_pkt_detection_threshold rather then u8. Additionally the enum's declaration has been moved above the dig structure, where the type is used, the 'typedef' has been removed to clear the checkpatch issue with defining new types, and the value 'DIG_PD_MAX' has been removed from the enumeration, since it is never used in code. Signed-off-by:
-
John Whitmore authored
The enumerated type dm_dig_connect_e is only used to group constant values, as the actual type is never used as the type for the variables which use the defined constants (cur_connect_state and pre_connect_state). These two member variables have had there defined types changed to properly reflect there usage and to permit compiler type checks to be performed. In addition the definition of the enumerated type has been moved above the structure which uses the type. The typedef of the enumerated type has been removed to clear the checkpatch issue with defining new types and the enumerated value DIG_CONNECT_MAX has been removed since it is never used in code. The resulting changes are all coding style in nature and should not impact runtime code execution. Signed-off-by:
-
John Whitmore authored
The enumerated type dm_dig_dbg_e is never used in code so has simply been removed from the source code. this is a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
The enumerated type dm_dig_alg_e is only used by one variable in the code, 'dig_algorithm', a member variable of the structure dig. That member variable was defined to be of type 'u8' thus negating any advantage of the use of an enumerated type, (compiler type-checking). The type of the variable 'dig_algorithm' has been change to reflect its use of the enumeration and the enumerated type moved in the file so that it appears before it is used in the file. Additionally the 'typedef' has been removed to clear the checkpatch issue with defining new types, and the type renamed to enum dig_algorithm. The enumerated constant DIG_ALGO_MAX has been removed from the type since it is never used in the code. These changes are all coding style in nature and as such should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove the enumerated type dm_dig_op_e. The type is only used as a parameter to the function dm_change_dynamic_initgain_thresh(), but that function is never referenced in the code at all. I would consider this to be a coding style change as the function is never referenced and as a result the enumeration is never used. In any case there should be no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
The enumerated type dm_ratr_sta_e was defined in the file drivers/staging/rtl8192u/r8192U_dm.h but never actually used in that file. The only variable which uses this enumerated type is 'ratr_state', a member variable of the _rate_adaptive structure defined in the file drivers/staging/rtl8192u/r8192U.h. To clarify and place the enumerated type close to where it is used the type was moved to the drivers/staging/rtl8192u/r8192U.h file. In addition the member variable 'ratr_state' which uses the enumerated constants was declared as being of type 'u8'. This negates any advantage of the enumerated type, compiler type-checking, so that member variable's type has been changed to being of the enumerated type. The typedef from the enumerated type has been removed to clear the checkpatch issue with defining new types. Additionally the name of the type has been left as enum dynamic_ratr_state This is a coding style change and should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Refactor the use of the enumerated type dm_dig_sta_e, which is not actually used for type checking by the compiler. The typedef of dm_dig_sta_e is removed to clear the checkpatch issue with defining new types, and the enumerated type is left with the name enum dynamic_init_gain_state The enumerated type defines values for the enumeration, which are used by both dig_state and dig_highpwr_state, (members of the struct dig). Both of those variables were defined as being of type u8. This negates any usefulness of the use of the enumeration, (compiler type checking). To make use of the compiler's type-checking the two member variables, dig_state and dig_highpwr_state have been changed to being of type enum dynamic_init_gain_state. The enumerated type has been moved above the struct dig definition so that the enumeration is already defined when the compiler reaches the two types using the enumerated type. These changes, whilst convoluted, are purely coding style in nature and should not impact runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove the typedef from cmpk_set_cfg_t, leaving the structure as struct cmd_pkt_set_configuration. This change clears the checkpatch issue with defining new types. The change is purely a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove the typedef of struct cmpk_intr_sta_t, the name of the structure has been left as cmd_pkt_interrupt_status. This clears the checkpatch issue with creating new types in code. The change is purely a coding style change and should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Correct the spelling of a number of comments, which cause a checkpatch issue. This is purely a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove the unused macro definition CMPK_RX_DBG_MSG_SIZE. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove the unused macro CMPK_TX_SET_CONFIG_SIZE. This is a coding style change which should not impact runtime code execution. Signed-off-by:
-
