Use a single long value instead of a single element array to represent
the core mask. The array is a leftover from 32/31 bit code so we were
able to use bitops helper functions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The s390 specific little endian bitop macros are gone since a long time.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

page_table_alloc then uses the flag for a single page allocation. This
means that this flag has never been actually useful here because it has
always been used only for PAGE_ALLOC_COSTLY requests.

An earlier attempt to remove the flag 10d58bf2 ("s390: get rid of
superfluous __GFP_REPEAT") has missed this one but the situation is very
same here.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add a new line to /proc/cpuinfo which shows all available facilities
as reported by the stfle instruction:

> cat /proc/cpuinfo
...
facilities      : 0 1 2 3 4 6 7 ...
...
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Same helper function like for_each_set_bit in generic code.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

the KVM tree easier.

When a secure key with an old Master Key Verification
Pattern was given to the pkey_findcard function, there was
no responsible card found because only the current MKVP of
each card was compared. With this fix also the old MKVP
values are considered and so a matching card able to handle
the key is reported back to the caller.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Commit af51160e ("s390/smp: initialize cpu_present_mask in
setup_arch") initializes the cpu_present_mask much earlier than
before. However the cpu detection code relies on the fact that iff
logical cpu 0 is marked present then also the corresponding physical
cpu address within the pcpu_devices array slot is valid.

Since commit 44fd2299 ("[PATCH] Register the boot-cpu in the cpu
maps earlier") this assumption is not true anymore. The patch marks
logical cpu 0 as present in common code without that architecture code
had a chance to setup the logical to physical map.

With that change the cpu detection code assumes that the physical cpu
address of cpu 0 is also 0, which is not necessarily true.
Subsequently the physical cpu address of the ipl cpu will be mapped to
a different logical cpu. If that cpu is brought online later the ipl
cpu will send itself an initial cpu reset sigp signal. This in turn
completely resets the ipl cpu and the system stops working.

A dump of such a system looks like a "store status" has been
forgotten. But actually the kernel itself removed all traces which
would allow to easily tell what went wrong.

To fix this initialize the logical to physical cpu address already in
smp_setup_processor_id(). In addition remove the initialization of the
cpu_present_mask and cpu_online_mask for cpu 0, since that has already
been done. Also add a sanity check, just in case common code will be
changed again...

The problem can be easily reproduced within a z/VM guest:

> chcpu -d 0
> vmcp ipl

Fixes: af51160e ("s390/smp: initialize cpu_present_mask in setup_arch")
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Reorder the operations in decompress_kernel() to ensure initrd is moved
to a safe location before the bss section is zeroed.

During decompression bss can overlap with the initrd and this can
corrupt the initrd contents depending on the size of the compressed
kernel (which affects where the initrd is placed by the bootloader) and
the size of the bss section of the decompressor.

Also use the correct initrd size when checking for overlaps with
parmblock.

Fixes: 06c0dd72 ([S390] fix boot failures with compressed kernels)
Cc: stable@vger.kernel.org
Reviewed-by: Joy Latten <joy.latten@canonical.com>
Reviewed-by: Vineetha HariPai <vineetha.hari.pai@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This adds a new system call to enable the use of guarded storage for
user space processes. The system call takes two arguments, a command
and pointer to a guarded storage control block:

    s390_guarded_storage(int command, struct gs_cb *gs_cb);

The second argument is relevant only for the GS_SET_BC_CB command.

The commands in detail:

0 - GS_ENABLE
    Enable the guarded storage facility for the current task. The
    initial content of the guarded storage control block will be
    all zeros. After the enablement the user space code can use
    load-guarded-storage-controls instruction (LGSC) to load an
    arbitrary control block. While a task is enabled the kernel
    will save and restore the current content of the guarded
    storage registers on context switch.
1 - GS_DISABLE
    Disables the use of the guarded storage facility for the current
    task. The kernel will cease to save and restore the content of
    the guarded storage registers, the task specific content of
    these registers is lost.
2 - GS_SET_BC_CB
    Set a broadcast guarded storage control block. This is called
    per thread and stores a specific guarded storage control block
    in the task struct of the current task. This control block will
    be used for the broadcast event GS_BROADCAST.
3 - GS_CLEAR_BC_CB
    Clears the broadcast guarded storage control block. The guarded-
    storage control block is removed from the task struct that was
    established by GS_SET_BC_CB.
4 - GS_BROADCAST
    Sends a broadcast to all thread siblings of the current task.
    Every sibling that has established a broadcast guarded storage
    control block will load this control block and will be enabled
    for guarded storage. The broadcast guarded storage control block
    is used up, a second broadcast without a refresh of the stored
    control block with GS_SET_BC_CB will not have any effect.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Before commit 452b94b8 ("mm/swap: don't BUG_ON() due to
uninitialized swap slot cache"), the following bug is reported,

  ------------[ cut here ]------------
  kernel BUG at mm/swap_slots.c:270!
  invalid opcode: 0000 [#1] SMP
  CPU: 5 PID: 1745 Comm: (sd-pam) Not tainted 4.11.0-rc1-00243-g24c534bb #1
  Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016
  RIP: 0010:free_swap_slot+0xba/0xd0
  Call Trace:
   swap_free+0x36/0x40
   do_swap_page+0x360/0x6d0
   __handle_mm_fault+0x880/0x1080
   handle_mm_fault+0xd0/0x240
   __do_page_fault+0x232/0x4d0
   do_page_fault+0x20/0x70
   page_fault+0x22/0x30
  ---[ end trace aefc9ede53e0ab21 ]---

This is raised by the BUG_ON(!swap_slot_cache_initialized) in
free_swap_slot().  This is incorrect, because even if the swap slots
cache fails to be initialized, the swap should operate properly without
the swap slots cache.  And the use_swap_slot_cache check later in the
function will protect the uninitialized swap slots cache case.

In commit 452b94b8, the BUG_ON() is replaced by WARN_ON_ONCE().  In
the patch, the WARN_ON_ONCE() is removed too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "Nine small fixes: the biggest is probably finally sorting out Kconfig
  issues with lpfc nvme.  There are some performance fixes for megaraid
  and hpsa and a static checker fix"

[ Johannes Thumshirn points out that there still seems to be more lpfc
  vs nvme config issues.  Oh well.   - Linus ]

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Finalize Kconfig options for nvme
  scsi: ufs: don't check unsigned type for a negative value
  scsi: hpsa: do not timeout reset operations
  scsi: hpsa: limit outstanding rescans
  scsi: hpsa: update check for logical volume status
  scsi: megaraid_sas: Driver version upgrade
  scsi: megaraid_sas: raid6 also require cpuSel check same as raid5
  scsi: megaraid_sas: add correct return type check for ldio hint logic for raid1
  scsi: megaraid_sas: enable intx only if msix request fails

Pull HID fixes from Jiri Kosina:

 - regression fixes for Wacom devices, from Aaron Armstrong Skomra and
   Ping Cheng

 - memory leak in hid-sony driver from Roderick Colenbrander

 - new device IDs support from Oscar Campos and Daniel Drake

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: generic: Wacom mouse is only provided for opaque tablets
  HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to hid-corsair
  HID: corsair: support for K65-K70 Rapidfire and Scimitar Pro RGB
  HID: wacom: don't manually release resources for the EKR
  HID: wacom: Correct Intuos Pro 2 resolution
  HID: sony: Fix input device leak when connecting a DS4 twice using USB/BT
  HID: chicony: Add support for another ASUS Zen AiO keyboard

Pull GPIO fixes from Linus Walleij:
 "Here is the first set of GPIO fixes for 4.11. It was delayed a bit
  beacuse I was chicken when linux-next was not rotating last week.

  This hits the ST serial driver in drivers/tty/serial and that has an
  ACK from Greg, he suggested to keep the old GPIO fwnode API around to
  smoothen things in the merge Windod and those have now served their
  purpose so we take them out and convert the last driver to the new
  API.

  Apart from that it's fixes as usual.

  Summary:

   - set the parent on the Altera A10SR driver, also fix high level
     IRQs.

   - fix error path on the mockup driver.

   - compilation noise about unused functions fixed.

   - fix missed interrupts on the MCP23S08 expander, this is also tagged
     for stable.

   - retire the interrim helpers devm_get_gpiod_from_child() used to
     smoothen merging in the merge window"

* tag 'gpio-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio:mcp23s08 Fixed missing interrupts
  serial: st-asc: Use new GPIOD API to obtain RTS pin
  gpio: altera: Use handle_level_irq when configured as a level_high
  gpio: xgene: mark PM functions as __maybe_unused
  gpio: mockup: return -EFAULT if copy_from_user() fails
  gpio: altera-a10sr: Set gpio_chip parent property

Pull remoteproc fix from Bjorn Andersson:
 "This fixes a Kbuild dependency issue related to the Qualcomm
  remoteproc drivers"

* tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteproc:
  remoteproc: qcom: fix QCOM_SMD dependencies

Pull f2fs fixes from Jaegeuk Kim:

 - fix performance regression reported by lkp-rebot

 - fix potential data lost after power-cut due to SSR reallocation

* tag 'for-f2fs-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: combine nat_bits and free_nid_bitmap cache
  f2fs: skip scanning free nid bitmap of full NAT blocks
  f2fs: use __set{__clear}_bit_le
  f2fs: declare static functions
  f2fs: don't overwrite node block by SSR

Commit f85c9dc6 ("Support tool ID and additional tool types") introduced mouse
and lens cursor tools to generic codepath, which covers both display (direct)
and opaque tablets (indirect devices). However, mouse and lens cursor tools are
only provided for opaque tablets. This patch ignores mouse and lens cursor tools
if the device is a display tablet.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This mouse sold by Corsair as Scimitar PRO RGB defines two consecutive
Logical Minimum items in its Application (Consumer.0001) report making
it non parseable. This patch fixes the report descriptor overriding
byte 77 in rdesc from 0x16 (Logical Minimum with 16 bits value) to 0x26
(Logical Maximum with 16 bits value).
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add quirks for several corsair gaming devices to avoid long delays on
report initialization

Supported devices:

 - Corsair K65RGB Rapidfire Gaming Keyboard
 - Corsair K70RGB Rapidfire Gaming Keyboard
 - Corsair Scimitar Pro RGB Gaming Mouse
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Commit 5b779fc5 introduces the manual release of resources in wacom_remove() as
an addition to the driver's use of devm.  The EKR resources can only be
released through wacom_remote_destroy_one() so we skip the manual release for
it.

Fixes: 5b779fc5 ("HID: wacom: release the resources before leaving despite devm")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The features struct for the second gen Intuos Pro uses the wrong constant for
the resolution. This fix is for commit 4922cd26.

Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

qcom_smd_register_edge() is provided by either QCOM_SMD or RPMSG_QCOM_SMD,
and if both of them are disabled, it does nothing.

The check for the PIL drivers however only checks for QCOM_SMD, so it breaks
with QCOM_SMD=n && RPMSG_QCOM_SMD=m:

drivers/remoteproc/built-in.o: In function `smd_subdev_remove':
qcom_wcnss_iris.c:(.text+0x231c): undefined reference to `qcom_smd_unregister_edge'
drivers/remoteproc/built-in.o: In function `smd_subdev_probe':
qcom_wcnss_iris.c:(.text+0x2344): undefined reference to `qcom_smd_register_edge'
drivers/remoteproc/built-in.o: In function `smd_subdev_probe':
qcom_q6v5_pil.c:(.text+0x3538): undefined reference to `qcom_smd_register_edge'
qcom_q6v5_pil.c:(.text+0x3538): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_smd_register_edge'

This clarifies the Kconfig dependency.

Fixes: 4b48921a ("remoteproc: qcom: Use common SMD edge handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Both nat_bits cache and free_nid_bitmap cache provide same functionality
as a intermediate cache between free nid cache and disk, but with
different granularity of indicating free nid range, and different
persistence policy. nat_bits cache provides better persistence ability,
and free_nid_bitmap provides better granularity.

In this patch we combine advantage of both caches, so finally policy of
the intermediate cache would be:
- init: load free nid status from nat_bits into free_nid_bitmap
- lookup: scan free_nid_bitmap before load NAT blocks
- update: update free_nid_bitmap in real-time
- persistence: udpate and persist nat_bits in checkpoint

This patch also resolves performance regression reported by lkp-robot.

commit:
  4ac91242 ("f2fs: introduce free nid bitmap")
  d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le")
  1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache")

4ac91242 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15
---------------- -------------------------- --------------------------
         %stddev     %change         %stddev     %change         %stddev
             \          |                \          |                \
     77863 ±  0%      +2.1%      79485 ±  1%     +50.8%     117404 ±  0%  aim7.jobs-per-min
    231.63 ±  0%      -2.0%     227.01 ±  1%     -33.6%     153.80 ±  0%  aim7.time.elapsed_time
    231.63 ±  0%      -2.0%     227.01 ±  1%     -33.6%     153.80 ±  0%  aim7.time.elapsed_time.max
    896604 ±  0%      -0.8%     889221 ±  3%     -20.2%     715260 ±  1%  aim7.time.involuntary_context_switches
      2394 ±  1%      +4.6%       2503 ±  1%      +3.7%       2481 ±  2%  aim7.time.maximum_resident_set_size
      6240 ±  0%      -1.5%       6145 ±  1%     -14.1%       5360 ±  1%  aim7.time.system_time
   1111357 ±  3%      +1.9%    1132509 ±  2%      -6.2%    1041932 ±  2%  aim7.time.voluntary_context_switches
...
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds to account free nids for each NAT blocks, and while
scanning all free nid bitmap, do check count and skip lookuping in
full NAT block.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch uses __set{__clear}_bit_le for highter speed.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This is to avoid build warning reported by kbuild test robot.
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch fixes that SSR can overwrite previous warm node block consisting of
a node chain since the last checkpoint.

Fixes: 5b6c6be2 ("f2fs: use SSR for warm node as well")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check.  The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.

I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there.  I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.

Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more powerpc fixes from Michael Ellerman:
 "A couple of minor powerpc fixes for 4.11:

   - wire up statx() syscall

   - don't print a warning on memory hotplug when HPT resizing isn't
     available

  Thanks to: David Gibson, Chandan Rajendra"

* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Don't give a warning when HPT resizing isn't available
  powerpc: Wire up statx() syscall

Pull parisc fixes from Helge Deller:

 - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
   modules with CONFIG_MODVERSIONS.

 - Dave Anglin optimized the cache flushing for vmap ranges.

 - Arvind Yadav provided a fix for a potential NULL pointer dereference
   in the parisc perf code (and some code cleanups).

 - I wired up the new statx system call, fixed some compiler warnings
   with the access_ok() macro and fixed shutdown code to really halt a
   system at shutdown instead of crashing & rebooting.

* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix system shutdown halt
  parisc: perf: Fix potential NULL pointer dereference
  parisc: Avoid compiler warnings with access_ok()
  parisc: Wire up statx system call
  parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
  parisc: support R_PARISC_SECREL32 relocation in modules

Pull SCSI target fixes from Nicholas Bellinger:
 "The bulk of the changes are in qla2xxx target driver code to address
  various issues found during Cavium/QLogic's internal testing (stable
  CC's included), along with a few other stability and smaller
  miscellaneous improvements.

  There are also a couple of different patch sets from Mike Christie,
  which have been a result of his work to use target-core ALUA logic
  together with tcm-user backend driver.

  Finally, a patch to address some long standing issues with
  pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
  which will make folks using physical (or virtual) magnetic tape happy"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
  qla2xxx: Update driver version to 9.00.00.00-k
  qla2xxx: Fix delayed response to command for loop mode/direct connect.
  qla2xxx: Change scsi host lookup method.
  qla2xxx: Add DebugFS node to display Port Database
  qla2xxx: Use IOCB interface to submit non-critical MBX.
  qla2xxx: Add async new target notification
  qla2xxx: Export DIF stats via debugfs
  qla2xxx: Improve T10-DIF/PI handling in driver.
  qla2xxx: Allow relogin to proceed if remote login did not finish
  qla2xxx: Fix sess_lock & hardware_lock lock order problem.
  qla2xxx: Fix inadequate lock protection for ABTS.
  qla2xxx: Fix request queue corruption.
  qla2xxx: Fix memory leak for abts processing
  qla2xxx: Allow vref count to timeout on vport delete.
  tcmu: Convert cmd_time_out into backend device attribute
  tcmu: make cmd timeout configurable
  tcmu: add helper to check if dev was configured
  target: fix race during implicit transition work flushes
  target: allow userspace to set state to transitioning
  target: fix ALUA transition timeout handling
  ...

Pull device-dax fixes from Dan Williams:
 "The device-dax driver was not being careful to handle falling back to
  smaller fault-granularity sizes.

  The driver already fails fault attempts that are smaller than the
  device's alignment, but it also needs to handle the cases where a
  larger page mapping could be established. For simplicity of the
  immediate fix the implementation just signals VM_FAULT_FALLBACK until
  fault-size == device-alignment.

  One fix is for -stable to address pmd-to-pte fallback from the
  original implementation, another fix is for the new (introduced in
  4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
  ride.

  These have received a build success notification from the kbuild
  robot"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix debug output typo
  device-dax: fix pud fault fallback handling
  device-dax: fix pmd/pte fault fallback handling

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

For target mode, when new scsi command arrive, driver first performs
a look up of the SCSI Host. The current look up method is based on
the ALPA portion of the NPort ID. For Cisco switch, the ALPA can
not be used as the index. Instead, the new search method is based
on the full value of the Nport_ID via btree lib.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

The Mailbox interface is currently over subscribed. We like
to reserve the Mailbox interface for the chip managment and
link initialization. Any non essential Mailbox command will
be routed through the IOCB interface. The IOCB interface is
able to absorb more commands.

Following commands are being routed through IOCB interface

- Get ID List (007Ch)
- Get Port DB (0064h)
- Get Link Priv Stats (006Dh)
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>