Pull x86 cpuid updates from Borislav Petkov:

 - Enable the short string copies for CPUs which support them, in
   copy_user_enhanced_fast_string()

 - Avoid writing MSR_CSTAR on Intel due to TDX guests raising a #VE trap

* tag 'x86_cpu_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib: Add fast-short-rep-movs check to copy_user_enhanced_fast_string()
  x86/cpu: Don't write CSTAR MSR on Intel CPUs

Pull x86 cleanups from Borislav Petkov:
 "The mandatory set of random minor cleanups all over tip"

* tag 'x86_cleanups_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/events/amd/iommu: Remove redundant assignment to variable shift
  x86/boot/string: Add missing function prototypes
  x86/fpu: Remove duplicate copy_fpstate_to_sigframe() prototype
  x86/uaccess: Move variable into switch case statement

Pull misc x86 updates from Borislav Petkov:
 "The pile which we cannot find the proper topic for so we stick it in
  x86/misc:

   - Add support for decoding instructions which do MMIO accesses in
     order to use it in SEV and TDX guests

   - An include fix and reorg to allow for removing set_fs in UML later"

* tag 'x86_misc_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mtrr: Remove the mtrr_bp_init() stub
  x86/sev-es: Use insn_decode_mmio() for MMIO implementation
  x86/insn-eval: Introduce insn_decode_mmio()
  x86/insn-eval: Introduce insn_get_modrm_reg_ptr()
  x86/insn-eval: Handle insn_get_opcode() failure

Pull x86 mm updates from Borislav Petkov:

 - Flush *all* mappings from the TLB after switching to the trampoline
   pagetable to prevent any stale entries' presence

 - Flush global mappings from the TLB, in addition to the CR3-write,
   after switching off of the trampoline_pgd during boot to clear the
   identity mappings

 - Prevent instrumentation issues resulting from the above changes

* tag 'x86_mm_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Prevent early boot triple-faults with instrumentation
  x86/mm: Include spinlock_t definition in pgtable.
  x86/mm: Flush global TLB when switching to trampoline page-table
  x86/mm/64: Flush global TLB on boot and AP bringup
  x86/realmode: Add comment for Global bit usage in trampoline_pgd
  x86/mm: Add missing <asm/cpufeatures.h> dependency to <asm/page_64.h>

Pull x86 SGX updates from Borislav Petkov:

 - Add support for handling hw errors in SGX pages: poisoning,
   recovering from poison memory and error injection into SGX pages

 - A bunch of changes to the SGX selftests to simplify and allow of SGX
   features testing without the need of a whole SGX software stack

 - Add a sysfs attribute which is supposed to show the amount of SGX
   memory in a NUMA node, similar to what /proc/meminfo is to normal
   memory

 - The usual bunch of fixes and cleanups too

* tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/sgx: Fix NULL pointer dereference on non-SGX systems
  selftests/sgx: Fix corrupted cpuid macro invocation
  x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
  x86/sgx: Fix minor documentation issues
  selftests/sgx: Add test for multiple TCS entry
  selftests/sgx: Enable multiple thread support
  selftests/sgx: Add page permission and exception test
  selftests/sgx: Rename test properties in preparation for more enclave tests
  selftests/sgx: Provide per-op parameter structs for the test enclave
  selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed
  selftests/sgx: Move setup_test_encl() to each TEST_F()
  selftests/sgx: Encpsulate the test enclave creation
  selftests/sgx: Dump segments and /proc/self/maps only on failure
  selftests/sgx: Create a heap for the test enclave
  selftests/sgx: Make data measurement for an enclave segment optional
  selftests/sgx: Assign source for each segment
  selftests/sgx: Fix a benign linker warning
  x86/sgx: Add check for SGX pages to ghes_do_memory_failure()
  x86/sgx: Add hook to error injection address validation
  x86/sgx: Hook arch_memory_failure() into mainline code
  ...

Pull x86 resource control fixlet from Borislav Petkov:
 "A minor code cleanup removing a redundant assignment"

* tag 'x86_cache_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Remove redundant assignment to variable chunks

Pull x86 SEV updates from Borislav Petkov:
 "The accumulated pile of x86/sev generalizations and cleanups:

   - Share the SEV string unrolling logic with TDX as TDX guests need it
     too

   - Cleanups and generalzation of code shared by SEV and TDX"

* tag 'x86_sev_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Move common memory encryption code to mem_encrypt.c
  x86/sev: Rename mem_encrypt.c to mem_encrypt_amd.c
  x86/sev: Use CC_ATTR attribute to generalize string I/O unroll
  x86/sev: Remove do_early_exception() forward declarations
  x86/head64: Carve out the guest encryption postprocessing into a helper
  x86/sev: Get rid of excessive use of defines
  x86/sev: Shorten GHCB terminate macro names

Pull x86 platform fix from Borislav Petkov:
 "A single DT compatibility fix for the Intel media processor CE4100
  driver"

* tag 'x86_platform_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"

Pull x86 paravirtualization fix from Borislav Petkov:
 "Define the INTERRUPT_RETURN macro only when CONFIG_XEN_PV is enabled
  as it is its only user"

* tag 'x86_paravirt_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/paravirt: Fix build PARAVIRT_XXL=y without XEN_PV

Pull x86 fpu update from Borislav Petkov:
 "A single x86/fpu update for 5.17:

   - Exclude AVX opmask registers use from AVX512 state tracking as they
     don't contribute to frequency throttling"

* tag 'x86_fpu_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Correct AVX512 state tracking

Pull m68k updates from Geert Uytterhoeven:

 - enable memtest functionality

 - defconfig updates

* tag 'm68k-for-v5.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v5.16-rc1
  m68k: Enable memtest functionality

Pull s390 updates from Heiko Carstens:
 "Besides all the small improvements and cleanups the most notable part
  is the fast vector/SIMD implementation of the ChaCha20 stream cipher,
  which is an adaptation of Andy Polyakov's code for the kernel.

  Summary:

   - add fast vector/SIMD implementation of the ChaCha20 stream cipher,
     which mainly adapts Andy Polyakov's code for the kernel

   - add status attribute to AP queue device so users can easily figure
     out its status

   - fix race in page table release code, and and lots of documentation

   - remove uevent suppress from cio device driver, since it turned out
     that it generated more problems than it solved problems

   - quite a lot of virtual vs physical address confusion fixes

   - various other small improvements and cleanups all over the place"

* tag 's390-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
  s390/dasd: use default_groups in kobj_type
  s390/sclp_sd: use default_groups in kobj_type
  s390/pci: simplify __pciwb_mio() inline asm
  s390: remove unused TASK_SIZE_OF
  s390/crash_dump: fix virtual vs physical address handling
  s390/crypto: fix compile error for ChaCha20 module
  s390/mm: check 2KB-fragment page on release
  s390/mm: better annotate 2KB pagetable fragments handling
  s390/mm: fix 2KB pgtable release race
  s390/sclp: release SCLP early buffer after kernel initialization
  s390/nmi: disable interrupts on extended save area update
  s390/zcrypt: CCA control CPRB sending
  s390/disassembler: update opcode table
  s390/uv: fix memblock virtual vs physical address confusion
  s390/smp: fix memblock_phys_free() vs memblock_free() confusion
  s390/sclp: fix memblock_phys_free() vs memblock_free() confusion
  s390/exit: remove dead reference to do_exit from copy_thread
  s390/ap: add missing virt_to_phys address conversion
  s390/pgalloc: use pointers instead of unsigned long values
  s390/pgalloc: add virt/phys address handling to base asce functions
  ...

Pull arm64 updates from Catalin Marinas:

 - KCSAN enabled for arm64.

 - Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.

 - Some more SVE clean-ups and refactoring in preparation for SME
   support (scalable matrix extensions).

 - BTI clean-ups (SYM_FUNC macros etc.)

 - arm64 atomics clean-up and codegen improvements.

 - HWCAPs for FEAT_AFP (alternate floating point behaviour) and
   FEAT_RPRESS (increased precision of reciprocal estimate and
   reciprocal square root estimate).

 - Use SHA3 instructions to speed-up XOR.

 - arm64 unwind code refactoring/unification.

 - Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
   1 (potentially set by a hypervisor; user-space already does this).

 - Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
   Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.

 - Other fixes and clean-ups; highlights: fix the handling of erratum
   1418040, correct the calculation of the nomap region boundaries,
   introduce io_stop_wc() mapped to the new DGH instruction (data
   gathering hint).

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  arm64: Use correct method to calculate nomap region boundaries
  arm64: Drop outdated links in comments
  arm64: perf: Don't register user access sysctl handler multiple times
  drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
  perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
  arm64: errata: Fix exec handling in erratum 1418040 workaround
  arm64: Unhash early pointer print plus improve comment
  asm-generic: introduce io_stop_wc() and add implementation for ARM64
  arm64: Ensure that the 'bti' macro is defined where linkage.h is included
  arm64: remove __dma_*_area() aliases
  docs/arm64: delete a space from tagged-address-abi
  arm64: Enable KCSAN
  kselftest/arm64: Add pidbench for floating point syscall cases
  arm64/fp: Add comments documenting the usage of state restore functions
  kselftest/arm64: Add a test program to exercise the syscall ABI
  kselftest/arm64: Allow signal tests to trigger from a function
  kselftest/arm64: Parameterise ptrace vector length information
  arm64/sve: Minor clarification of ABI documentation
  arm64/sve: Generalise vector length configuration prctl() for SME
  arm64/sve: Make sysctl interface for SVE reusable by SME
  ...

Pull asm-generic cleanups from Arnd Bergmann:
 "A few minor cleanups for cross-architecture code: Alexandre Ghiti
  deals with removing some leftovers from drivers and features that have
  been removed, and Wasin Thonkaew has a cosmetic change"

* tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/error-injection.h: fix a spelling mistake, and a coding style issue
  arch: Remove leftovers from prism54 wireless driver
  arch: Remove leftovers from mandatory file locking
  Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
  Documentation, arch: Remove leftovers from raw device

Pull RISC-V SoC updates from Arnd Bergmann:
 "Add support for StarFive JH7100 RISC-V SoC

  This adds support for the StarFive JH7100, including the necessary
  device drivers and DT files for the BeagleV Starlight prototype board,
  with additional boards to be added later. This SoC promises to be the
  first usable low-cost platform for RISC-V.

  I've taken this through the SoC tree in the anticipation of adding a
  few other Arm based SoCs as well, but those did not pass the review in
  time, so it's only this one"

* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  reset: starfive-jh7100: Fix 32bit compilation
  RISC-V: Add BeagleV Starlight Beta device tree
  RISC-V: Add initial StarFive JH7100 device tree
  serial: 8250_dw: Add StarFive JH7100 quirk
  dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
  pinctrl: starfive: Add pinctrl driver for StarFive SoCs
  dt-bindings: pinctrl: Add StarFive JH7100 bindings
  dt-bindings: pinctrl: Add StarFive pinctrl definitions
  reset: starfive-jh7100: Add StarFive JH7100 reset driver
  dt-bindings: reset: Add Starfive JH7100 reset bindings
  dt-bindings: reset: Add StarFive JH7100 reset definitions
  clk: starfive: Add JH7100 clock generator driver
  dt-bindings: clock: starfive: Add JH7100 bindings
  dt-bindings: clock: starfive: Add JH7100 clock definitions
  dt-bindings: interrupt-controller: Add StarFive JH7100 plic
  dt-bindings: timer: Add StarFive JH7100 clint
  RISC-V: Add StarFive SoC Kconfig option

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "As usual, this is the bulk of the updates for the SoC tree, adding
  more devices to existing files, addressing issues from ever improving
  automated checking, and fixing minor issues.

  The most interesting bits as usual are the new platforms. All the
  newly supported SoCs belong into existing families this time:

   - Qualcomm gets support for two newly announced platforms, both of
     which can now work in production environments: the SDX65 5G modem
     that can run a minimal Linux on its Cortex-A7 core, and the
     Snapdragon 8 Gen 1, their latest high-end phone SoC.

   - Renesas adds support for R-Car S4-8, the most recent automotive
     Server/Communication SoC.

   - TI adds support for J721s2, a new automotive SoC in the K3 family.

   - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
     generation following their popular MT76xx series. Only basic
     support is added for now.

   - NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
     series.

   - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
     have supported for a long time.

  New boards with the existing SoCs include

   - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers

   - AT91/SAMA5 based evaluation board

   - NXP gains twenty new development and industrial boards for their
     i.MX and Layerscape SoCs

   - Intel IXP4xx now supports the final two machines in device tree
     that were previously only supported in old style board files.

   - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
     MT8183 is used in the Acer Chromebook 314.

   - Qualcomm gains support for the reference machines using the two new
     SoCs, plus a number of Chromebook variants and phones based on the
     Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
     devices and the Microsoft Surface Duo 2.

   - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.

   - Tegra now boots various older Android devices based on 32-bit chips
     out of the box, including a number of ASUS Transformer tablets.

     There is also a new Jetson AGX Orin developer kit.

   - Apple support adds the missing device trees for all the remaining
     M1 Macbook and iMac variants, though not yet the M1 Pro/Max
     versions.

   - Allwinner now supports another version of the Tanix TX6 set-top box
     based on the H6 SoC.

   - Broadcom gains support for the Netgear RAXE500 Wireless router
     based on BCM4908"

* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
  Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
  arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
  arm64: dts: qcom: sm8450-qrd: Enable USB nodes
  arm64: dts: qcom: sm8450: Add usb nodes
  ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
  dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
  ARM: dts: aspeed: add LCLK setting into LPC IBT node
  ARM: dts: aspeed: p10: Add TPM device
  ARM: dts: aspeed: p10: Enable USB host ports
  ARM: dts: aspeed: Add TYAN S8036 BMC machine
  ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
  ARM: dts: aspeed: Adding Facebook Bletchley BMC
  ARM: dts: aspeed: g220a: Enable secondary flash
  ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
  ARM: dts: aspeed: Add secure boot controller node
  dt-bindings: aspeed: Add Secure Boot Controller bindings
  ARM: dts: Remove "spidev" nodes
  dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
  dt-bindings: arm: samsung: Document E850-96 board binding
  dt-bindings: Add vendor prefix for WinLink
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are cleanups and minor bugfixes across several SoC specific
  drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
  Renesas, ZynqMP

  Noteworthy new features are:

   - The op-tee firmware driver gains support for asynchronous
     notifications from secure-world firmware.

   - Qualcomm platforms gain support for new SoC types in various
     drivers: power domain, cache controller, RPM sleep, soc-info

   - Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
     well as a new USIv2 driver that handles various types of serial
     communiction (uart, i2c, spi)

   - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
     as well as memory controller support for RZ/G2L (R9A07G044).

   - Apple M1 gains support for the PMGR power management driver"

* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
  soc: qcom: rpmh-rsc: Fix typo in a comment
  soc: qcom: socinfo: Add SM6350 and SM7225
  dt-bindings: arm: msm: Don't mark LLCC interrupt as required
  dt-bindings: firmware: scm: Add SM6350 compatible
  dt-bindings: arm: msm: Add LLCC for SM6350
  soc: qcom: rpmhpd: Sort power-domain definitions and lists
  soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
  soc: qcom: rpmhpd: Rename rpmhpd struct names
  soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
  soc: qcom: socinfo: add SM8450 ID
  soc: qcom: rpmhpd: Add SM8450 power domains
  dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
  soc: qcom: smem: Update max processor count
  dt-bindings: arm: qcom: Document SM8450 SoC and boards
  dt-bindings: firmware: scm: Add SM8450 compatible
  dt-bindings: arm: cpus: Add kryo780 compatible
  soc: qcom: rpmpd: Add support for sm6125
  dt-bindings: qcom-rpmpd: Add sm6125 power domains
  soc: qcom: aoss: constify static struct thermal_cooling_device_ops
  PM: AVS: qcom-cpr: Use div64_ul instead of do_div
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "These are the usual changes to enable newly added driver by default,
  and to do some housekeeping around changing Kconfig symbols"

* tag 'defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: defconfig: Enable Samsung I2C driver
  ARM: configs: at91: Enable crypto software implementations
  ARM: configs: at91: sama7: Enable SPI NOR and QSPI controller
  ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
  ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
  ARM: tegra_defconfig: Enable S/PDIF driver
  ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
  ARM: config: multi v7: Enable display drivers used by Tegra devices
  ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets
  ARM: configs: gemini: Activate crypto driver
  arm64: defconfig: enable drivers for booting i.MX8ULP
  arm64: defconfig: Enable R-Car S4-8
  arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
  arm64: defconfig: Enable OV5640
  arm64: defconfig: Enable VIDEO_IMX_MEDIA

Pull ARM SoC updates from Arnd Bergmann:
 "These are all minor bug fixes and cleanups to code in arch/arm and
  arch/arm64 that is specific to one SoC, updating Kconfig symbols, the
  MAINTAINERS file, and removing some dead code"

* tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: exynos: Enable Exynos Multi-Core Timer driver
  ARM: ixp4xx: remove unused header file pata_ixp4xx_cf.h
  ARM: ixp4xx: remove dead configs CPU_IXP43X and CPU_IXP46X
  MAINTAINERS: Add Florian as BCM5301X and BCM53573 maintainer
  ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
  ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
  ARM: imx: remove dead left-over from i.MX{27,31,35} removal
  ARM: s3c: add one more "fallthrough" statement in Jive
  ARM: s3c: include header for prototype of s3c2410_modify_misccr
  ARM: shmobile: rcar-gen2: Add missing of_node_put()

Pull input fix from Dmitry Torokhov:
 "A small fixup to the Zinitix touchscreen driver to avoid enabling the
  IRQ line before we successfully requested it"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: zinitix - make sure the IRQ is allocated before it gets enabled

Pull ARM SoC fix from Olof Johansson:
 "One more fix for 5.16

  I had missed one patch when I sent up what I thought was the last
  batch of fixes for this release. This one fixes issues on the
  Raspberry Pi platforms due to gpio init changes this release, so
  hopefully we can get it merged before final release is cut"

* tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: gpio-ranges property is now required

Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Revert "libtraceevent: Increase libtraceevent logging when verbose",
   breaks the build with libtraceevent-1.3.0, i.e. when building with
   'LIBTRACEEVENT_DYNAMIC=1'.

 - Avoid early exit in 'perf trace' due to running SIGCHLD handler
   before it makes sense to. It can happen when using a BPF source code
   event that have to be first built into an object file.

* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  Revert "libtraceevent: Increase libtraceevent logging when verbose"
  perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to

This reverts commit f7d6779d.

This bisected regression has impacted suspend-resume stability
since 5.15-rc1. It regressed -stable via 5.14.10.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315
Fixes: f7d6779d ("drm/amdgpu: stop scheduler when calling hw_fini (v2)")
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since irq request is the last thing in the driver probe, it happens
later than the input device registration. This means that there is a
small time window where if the open method is called the driver will
attempt to enable not yet available irq.

Fix that by moving the irq request before the input device registration.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 26822652 ("Input: add zinitix touchscreen driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ruSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.

[1] commit 2ab73c6d ("gpio: Support GPIO controllers without
    pin-ranges")

Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e6 ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes have come in, nothing overly severe but would be good
  to get in by final release:

   - More specific compatible fields on the qspi controller for socfpga,
     to enable quirks in the driver

   - A runtime PM fix for Renesas to fix mismatched reference counts on
     errors"

* tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
  dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
  reset: renesas: Fix Runtime PM usage

Pull i2c fixes from Wolfram Sang:
 "Fix the regression with AMD GPU suspend by reverting the
  handling of bus regulators in the I2C core.

  Also, there is a fix for the MPC driver to prevent an
  out-of-bound-access"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: core: support bus regulator controlling in adapter"
  i2c: mpc: Avoid out of bounds memory access

Pull power supply fixes from Sebastian Reichel:
 "Three fixes for the 5.16 cycle:

   - Avoid going beyond last capacity in the power-supply core

   - Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation
     in LLVM resulting in a build failure

   - Fix ADC measurements in bq25890 charger driver"

* tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: reset: ltc2952: Fix use of floating point literals
  power: bq25890: Enable continuous conversion for ADC at charging
  power: supply: core: Break capacity loop

Pull xfs fix from Darrick Wong:

 - Make the old ALLOCSP ioctl behave in a consistent manner with newer
   syscalls like fallocate.

* tag 'xfs-5.16-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate

There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field.  Move the s390 dasd sysfs code to use default_groups field
which has been the preferred way since commit aa30f47c ("kobject:
Add support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.

Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220106095401.3274637-1-gregkh@linuxfoundation.orgSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field.  Move the sclp_sd sysfs code to use default_groups field which
has been the preferred way since commit aa30f47c ("kobject: Add
support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.

Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220106095252.3273905-1-gregkh@linuxfoundation.orgSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull cgroup fixes from Tejun Heo:
 "This contains the cgroup.procs permission check fixes so that they use
  the credentials at the time of open rather than write, which also
  fixes the cgroup namespace lifetime bug"

* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  selftests: cgroup: Test open-time cgroup namespace usage for migration checks
  selftests: cgroup: Test open-time credential usage for migration checks
  selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
  cgroup: Use open-time cgroup namespace for process migration perm checks
  cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
  cgroup: Use open-time credentials for process migraton perm checks

Pull block fix from Jens Axboe:
 "Just the md bitmap regression this time"

* tag 'block-5.16-2022-01-07' of git://git.kernel.dk/linux-block:
  md/raid1: fix missing bitmap update w/o WriteMostly devices

Pull EDAC fix from Tony Luck:
 "Fix 10nm EDAC driver to release and unmap resources on systems without
  HBM"

* tag 'edac_urgent_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/i10nm: Release mdev/mbase when failing to detect HBM

This largely reverts commit 5a7b95fb. It
breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So,
let's remove the code and go back to the drawing board. We keep the
header extension to not break drivers already populating the regulator.
We expect to re-add the code handling it soon.

Fixes: 5a7b95fb ("i2c: core: support bus regulator controlling in adapter")
Reported-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Link: https://lore.kernel.org/r/1295184560.182511.1639075777725@mail.yahoo.comReported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Link: https://lore.kernel.org/r/7143a7147978f4104171072d9f5225d2ce355ec1.camel@yandex.ru
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1850Tested-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # 5.14+

This reverts commit 08efcb4a.

This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.

This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:

=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
>   243 |                 tep_set_loglevel(TEP_LOG_INFO);
>       |                 ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
>   243 |                 tep_set_loglevel(TEP_LOG_INFO);
>       |                                  ^~~~~~~~~~~~
>       |                                  TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
>   245 |                 tep_set_loglevel(TEP_LOG_DEBUG);
>       |                                  ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
>   247 |                 tep_set_loglevel(TEP_LOG_ALL);
>       |                                  ^~~~~~~~~~~

It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================

The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When running 'perf trace' with an BPF object like:

  # perf trace -e openat,tools/perf/examples/bpf/hello.c

the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.

Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christy Lee <christyc.y.lee@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull kvm fixes from Paolo Bonzini:
 "Two small fixes for x86:

   - lockdep WARN due to missing lock nesting annotation

   - NULL pointer dereference when accessing debugfs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Check for rmaps allocation
  KVM: SEV: Mark nested locking of kvm->lock

Pull drm fixes from Dave Airlie:
 "There is only the amdgpu runtime pm regression fix in here:

  amdgpu:

   - suspend/resume fix

   - fix runtime PM regression"

* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: disable runpm if we are the primary adapter
  fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
  drm/amd/pm: keep the BACO feature enabled for suspend