- 01 Mar, 2018 37 commits
-
-
Laurent Pinchart authored
The dss_mgr_*() functions take a channel argument to identify the channel they operate on. This prevents the functions from accessing driver data structures without resorting to global variables. In an effort to remove global variables, pass the omap_dss_device pointer associated with the channel instead. This will be used to look up the omap_drm_private data structure to pass to the dss_mgr_ops. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The dsi_display_init_dispc() and dsi_display_uninit_dispc() functions take a channel argument that is reduntant as it is always identical to the dsi->output.dispc_channel. Remove the argument and use the field directly in the functions to avoid misuse. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The dsi_data structure stores a pointer to a struct platform_device. The driver only uses the dev member of the platform device structure. Store the struct device pointer instead and use it directly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The dsi_bind() function receives a pointer to a struct device that it casts to a struct platform_device, only to use the platform device's dev field through the code. Use the dev pointer directly. While at it rename the struct platform_device pointer dsidev to pdev to make it more explicit. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The dsi_get_dsidrv_data() and dsi_get_dsidev_from_dssdev() inline functions convert a struct omap_dss_device pointer to the corresponding struct platform_device, and a struct platform_device pointer to the corresponding struct dsi_data. They are nearly always called together without any use of the intermediate platform_device, so combine them into a single function. In the three locations where only dsi_get_dsidrv_data() is used, call dev_get_drvdata() directly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
Internal dsi functions take a pointer to the DSI platform_device and then cast it to a dsi_data pointer. That's pointless as the caller already has the dsi_data pointer. Pass it directly instead of the platform_device pointer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The dss_unbind() function casts the struct device pointer to a struct platform_device, only to later use the struct device pointer from platform_device. Don't cast at all. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
As part of an effort to remove the usage of global variables in the driver, store the debugfs root directory in the dss_device structure instead of a global variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
As part of an effort to remove the usage of global variables in the driver, store the registered plls array in the dss_device structure instead of a global variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
To simplify implementation of debugfs seq_file show handlers, the driver passes the pointer to the show function through the debugfs_create_file data pointer. This prevents using the pointer to pass driver private data to the show handler, and requires all handlers to use global variables to access private data. To prepare for the removal of global private data in the driver, rework the debugfs infrastructure to allow passing a private data pointer to show handlers. The price to pay is explicit removal of debugfs files to free the internally allocated memory. This is desirable anyway as debugfs entries should be removed when a component driver is unbound, otherwise crashes will occur due to access to freed memory when the components will be dynamically allocated instead of stored in global variables. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The DSS private data structure is currently stored as a global variable. While no platform with multiple DSS devices currently exists nor is planned, this doesn't comply with the kernel device model and should thus be fixed. Allocate the DSS private data structure dynamically for each DSS instance and remove the global variable. All code that need access to the structure now retrieves it dynamically so we can remove the global variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
This removes the need to access the global DSS private data in those functions (both for the current accesses and the future ones that will be introduced when allocating the DSS device dynamically). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
This removes the need to access the global DSS private data in those functions (both for the current accesses and the future ones that will be introduced when allocating the DSS device dynamically). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
This removes the need to access the global DSS private data in those functions (both for the current accesses and the future ones that will be introduced when allocating the DSS device dynamically). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
This removes the need to access the global DSS private data in those functions (both for the current accesses and the future ones that will be introduced when allocating the DSS device dynamically). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
This removes the need to access the global DSS private data in those functions (both for the current accesses and the future ones that will be introduced when allocating the DSS device dynamically). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
This will allow accessing the PLL data to get the DSS device pointer, removing the need to access the global DSS private data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
To prepare for the removal of the global variable storing DSS private data, pass its pointer to the dss_runtime_{get,put}() functions. As this requires getting hold of the dss_device structure in the callers, we add a new dss_get_device() function to retrieve it. The function currently returns a pointer to the global data structure, and will later be updated to get the pointer from device driver data when the DSS private structure will be allocated dynamically. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The anoonymous dss structure in dss.c is the top-level component in the omapdss driver. As such it should store all internal instance-specific data that is currently stored in global variables. This however requires both naming the structure to pass it around functions, and accessing it from various locations in the omapdss driver. While we could implement get and set functions for every field that needs to be accessed outside of dss.c, that would introduce overhead and complexity that we could avoid by exposing the structure to internal components of the omapdss driver. Do so to prepare for removal of global variables. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
When merging the omapdrm and omapdss drivers there will be not omapdrm platform device anymore, and thus no associated probe and remove functions. To prepare for that, split all the initialization code from the probe function to make it usable without a platform device. Similarly, split the cleanup code from the remove function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Laurent Pinchart authored
The wait_for_bit_change() function returns the value of the bit it polls. This requires the caller to compare the return value to the expected bit value. As all the existing callers need is to check whether the bit has reached the expected value, it's easier to return a boolean status from the function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omap_dss_register_driver(), omap_dss_unregister_driver() and dispc_enable_gamma_table() functions don't exist anymore, remove their prototypes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The function is unused, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
There's no reason to delay initialization of most of the driver (such as mapping memory I/O, getting clocks or enabling runtime PM) to the component master bind handler. This additionally fixes a real PM issue caused enabling runtime PM in the bind handler. The bind handler performs the following sequence of PM operations: pm_runtime_enable(dev); pm_runtime_get_sync(dev); ... (access the hardware to read the device revision) ... pm_runtime_put_sync(dev); If a failure occurs at this point, the error path calls pm_runtime_disable() to balance the pm_runtime_enable() call. To understand the problem, it should be noted that the bind handler is called when one of the component registers itself, which happens in the component's probe handler. Furthermore, as the components are children of the DSS, the device core calls pm_runtime_get_sync() on the DSS platform device before calling the component's probe handler. This increases the DSS power usage count but doesn't runtime resume the device, as runtime PM is disabled at that point. The bind handler is thus called with runtime PM disabled, with the device runtime suspended, but with the power usage count larger than 0. The pm_runtime_get_sync() call will thus further increase the power usage count and runtime resume the device. The pm_runtime_put_sync() handler will decrease the power usage count to a non-zero value and will thus not suspend the device. Finally, the pm_runtime_disable() call will disable runtime PM, preventing the pm_runtime_put() call in the device core from runtime suspending the device. The DSS device is thus left powered on. To fix this, move the initialization code from the bind handler to the probe handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
A few functions defined in omapdss-base are internal to the module. Don't export them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The function isn't used outside of its compilation unit, make it static. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The encoder drivers need a handle to the source they are connected to in order to control the source. All drivers get that handle at probe time, resulting in probe deferral when the source hasn't been probed yet. However they don't need the handle until their connect handler is called. Move retrieval of the source handle to the connect handler to avoid probe deferrals. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The connector drivers need a handle to the source they are connected to in order to control the source. All drivers get that handle at probe time, resulting in probe deferral when the source hasn't been probed yet. However they don't need the handle until their connect handler is called. Move retrieval of the source handle to the connect handler to avoid probe deferrals. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The connector drivers need a handle to the source they are connected to in order to control the source. All drivers get that handle at probe time, resulting in probe deferral when the source hasn't been probed yet. However they don't need the handle until their connect handler is called. Move retrieval of the source handle to the connect handler to avoid probe deferrals. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
No panel is instantiated through platform data anymore, there is no need to check for OF node presence. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
No encoder is instantiated through platform data anymore, there is no need to check for OF node presence. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
No connector is instantiated through platform data anymore, there is no need to check for OF node presence. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The tvc_of_match variable is never referenced before its definition. Remove the forward declaration. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The kernel favours 'unsigned int' over plain 'unsigned'. Replace all occurences of the latter by the former. This avoid lots of checkpatch complaints in patches that touch lines where a plain 'unsigned' is used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The standard kernel integer types are [us]{8,16,32}. Use them instead of the u?int{8,16,32}_t types. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Driver Changes: - Lift alpha_support protection from Cannonlake (Rodrigo) * Meaning the driver should mostly work for the hardware we had at our disposal when testing * Used to be preliminary_hw_support - Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo) - Cannonlake port register fix (Mahesh) - Fix Dell Venue 8 Pro black screen after modeset (Hans) - Fix for always returning zero out-fence from execbuf (Daniele) - Fix HDMI audio when no no relevant video output is active (Jani) - Fix memleak of VBT data on driver_unload (Hans) - Fix for KASAN found locking issue (Maarten) - RCU barrier consolidation to improve igt/gem_sync/idle (Chris) - Optimizations to IRQ handlers (Chris) - vblank tracking improvements (64-bit resolution, PM) (Dhinakaran) - Pipe select bit corrections (Ville) - Reduce runtime computed device_info fields (Chris) - Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris) - A bunch of kerneldoc warning fixes (Chris) * tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits) drm/i915: Update DRIVER_DATE to 20180221 drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning drm/i915: Move the policy for placement of the GGTT vma into the caller drm/i915: Also check view->type for a normal GGTT view drm/i915: Drop WaDoubleCursorLP3Latency:ivb drm/i915: Set the primary plane pipe select bits on gen4 drm/i915: Don't set cursor pipe select bits on g4x+ drm/i915: Assert that we don't overflow frontbuffer tracking bits drm/i915: Track number of pending freed objects drm/i915/: Initialise trans_min for skl_compute_transition_wm() drm/i915: Clear the in-use marker on execbuf failure drm/i915: Prune gen8_gt_irq_handler drm/i915: Track GT interrupt handling using the master iir drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use drm: intel_dpio_phy: fix kernel-doc comments at nested struct drm/i915: Release connector iterator on a digital port conflict. drm/i915/execlists: Remove too early assert drm/i915: Assert that we always complete a submission to guc/execlists drm: move read_domains and write_domain into i915 ...
-
https://github.com/jsarha/linuxDave Airlie authored
drm/tilcdc changes to v4.17 * tag 'tilcdc-4.17' of https://github.com/jsarha/linux: drm/tilcdc: tilcdc_panel: Rename device from "panel" to "tilcdc-panel" drm/tilcdc: Add support for drm panels drm/tilcdc: panel: Use common error handling code in of_get_panel_info() drm/tilcdc: Delete an error message for a failed memory allocation in seven functions
-
- 28 Feb, 2018 3 commits
-
-
Jyri Sarha authored
Rename the bundled tilcdc_panel driver from just "panel" to "tilcdc-panel" to avoid noisy error messages from the driver trying to probe all device nodes named "panel". Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Jyri Sarha authored
Add support for drm panels to tilcdc. Adding the support on top of the existing bridge support needs only couple of lines of code when using using the drm panel bridge helpers. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Markus Elfring authored
Add a jump target so that a bit of exception handling can be better reused at the end of this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jyri Sarha <jsarha@ti.com>
-