Move get_chip_info callback to the start of API.
This should be first check in probe() call.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-4-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove unused variables - i2s_mode, i2s_pin_config_offset from code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-3-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

ACP SOF driver supports different audio configurations.
Explicit condition check for I2S configuration will break
other audio endpoint configurations.

acp_dai_probe() function is not required as we have
machine select logic to select the exact machine.

Remove acp_dai_probe() from existing AMD PCI driver code base.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-2-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

During initial SOF driver bring up on AMD platforms, only DMIC
support was added. As of today, we have a complete SOF solution for
I2S endpoints along with DMIC endpoint.
This code is no longer required.
Remove unused code from RMB and RN platform ACP PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the Maxim Integrated MAX98371 audio codec bindings to DT schema.
Signed-off-by: André Morishita <andremorishita@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230401181930.533067-1-andremorishita@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This model requires an additional detection quirk to enable the internal microphone.
Signed-off-by: Prajna Sariputra <putr4.s@gmail.com>
Link: https://lore.kernel.org/r/2283110.ElGaqSPkdT@n0067ax-linux62Signed-off-by: Mark Brown <broonie@kernel.org>

The file named 'controls' in the DSP's debugfs root contains a
formatted table describing the controls defined within the loaded DSP
firmware, it is of the form

  name: len region:offset addr fwname algid ctltype flags en dirty

Where flags is represented as a character for each flag if set, or '-',
enabled is whether the control is enabled or disabled and dirty is
whether the control value is set in the cache but not the hardware.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230328131018.6820-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Updating the clock source from ACLK to default clock
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230331052102.2211115-1-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add dt-bindings information for Analog Devices MAX98363 SoundWire Amplifier
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330234319.6841-2-ryan.lee.analog@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Added Analog Devices MAX98363 SoundWire Amplifier Driver.
The MAX98363 is a SoundWire peripheral device that supports
MIPI SoundWire v1.2-compatible digital interface for audio and
control data.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230330234319.6841-1-ryan.lee.analog@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Several devices (e.g. SC8280XP and SM8450) expect a NPL (Near Pad Logic)
clock.  Add the clock and customize allowed clocks per each variant.
The clocks are also required by ADSP in all variants.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330113405.55722-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The RX macro codec comes on some platforms in two variants - ADSP
and ADSP bypassed - thus the clock-names varies from 3 to 5.  The clocks
must vary as well:

  sc7280-idp.dtb: codec@3200000: clocks: [[202, 8], [202, 7], [203]] is too short

Fixes: 852fda58 ("ASoC: qcom: dt-bindings: Update bindings for clocks in lpass digital codes")
Cc: <stable@vger.kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330071333.24308-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the ALC5632 audio codec bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Link: https://lore.kernel.org/r/20230327211629.28643-1-danascape@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

Simplify set_stream in SoundWire codecs.

Currently we sequence speakers with line and headphone outputs in DAPM.
This works well when speakers are integrate into a CODEC but when there is
an external speaker driver connected to a line or headphone output it can
mean that the speaker driver ends up getting sequenced such that it picks
up pops and clicks from the CODEC. Mask this by moving speakers after the
other outputs in DAPM.

We may want to consider doing this for headphones too but separate drivers
are less common there and headphone drivers often also function as line
outputs so the situation is less clear.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-asoc-dapm-spk-v1-1-e1f27f766505@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

So they can be used as a basis for new work.

Add the VA macro codec on Qualcomm SM8550, which comes without NPL clock
exposed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230327132254.147975-9-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

On SOF, many topology is assuming dai_link->platform exists, and is
allowed to be overwritten on each link_load().
This patch restore the removed dai_link->platform for SOF, and add
the comment.

Fixes: e7098ba9 ("ASoC: soc-topology.c: remove unnecessary dai_link->platform")
Reported-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87jzz7jczp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ikcsr5.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-14-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-13-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-12-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-11-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-10-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-9-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-8-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-7-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-6-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-5-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-4-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using a dynamic allocation to store a single pointer is not very
efficient/useful.

Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.

And last the API requires the previous stream information to be
cleared when the argument is NULL.

Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-3-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The API requires the stream info to be cleared when the argument is
NULL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-2-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

If an IPC4 topology contains an unsupported widget, its .module_info
field won't be set, then sof_ipc4_route_setup() will cause a kernel
Oops trying to dereference it. Add a check for such cases.

Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230329113828.28562-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for the WSA macro codec on Qualcomm SM8550.  SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-11-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add the WSA macro codec on Qualcomm SM8550, which comes without NPL clock
exposed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230327132254.147975-10-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add the VA macro codec on Qualcomm SM8550, which comes without NPL clock
exposed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230327132254.147975-9-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for the TX macro codec on Qualcomm SM8550.  SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-7-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for the RX macro codec on Qualcomm SM8550.  SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

On SOF, many topology is assuming dai_link->platform exists, and is
allowed to be overwritten on each link_load().
This patch restore the removed dai_link->platform for SOF, and add
the comment.

Fixes: e7098ba9 ("ASoC: soc-topology.c: remove unnecessary dai_link->platform")
Reported-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87jzz7jczp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ikcsr5.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:

Hi,

Dependencies
============
For va-macro bindings:
https://lore.kernel.org/r/20221118071849.25506-2-srinivas.kandagatla@linaro.org

NOT a dependency
================
The patchset can be applied independently of my previous fix:
https://lore.kernel.org/linux-arm-msm/20230310100937.32485-1-krzysztof.kozlowski@linaro.org/T/#u

Logically, better if they were together, but code will work fine other way.

Changes since v1
================
1. Move the flag define to common header.

Best regards,
Krzysztof

Krzysztof Kozlowski (9):
  ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants
  ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro
  ASoC: codecs: lpass-rx-macro: add support for SM8550
  ASoC: dt-bindings: qcom,lpass-tx-macro: narrow clocks per variants
  ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8550 TX macro
  ASoC: codecs: lpass-tx-macro: add support for SM8550
  ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8550 VA macro
  ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8550 WSA macro
  ASoC: codecs: lpass-wsa-macro: add support for SM8550

 .../bindings/sound/qcom,lpass-rx-macro.yaml   | 76 +++++++++++++----
 .../bindings/sound/qcom,lpass-tx-macro.yaml   | 81 +++++++++++++++----
 .../bindings/sound/qcom,lpass-va-macro.yaml   | 18 +++++
 .../bindings/sound/qcom,lpass-wsa-macro.yaml  | 23 +++++-
 sound/soc/codecs/lpass-macro-common.h         |  3 +
 sound/soc/codecs/lpass-rx-macro.c             | 36 +++++++--
 sound/soc/codecs/lpass-tx-macro.c             | 35 ++++++--
 sound/soc/codecs/lpass-wsa-macro.c            | 37 +++++++--
 8 files changed, 252 insertions(+), 57 deletions(-)

--
2.34.1

Support for DMICs was added in commit 97945c46 ("ASoC: WM8903:
Implement DMIC support"). Remove them from the TODO list at the top of
the driver.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230328095819.1632802-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>