- 26 Jul, 2019 40 commits
-
-
Taehee Yoo authored
[ Upstream commit a2bed907 ] Current gtp_newlink() could be called after unregister_pernet_subsys(). gtp_newlink() uses gtp_net but it can be destroyed by unregister_pernet_subsys(). So unregister_pernet_subsys() should be called after rtnl_link_unregister(). Test commands: #SHELL 1 while : do for i in {1..5} do ./gtp-link add gtp$i & done killall gtp-link done #SHELL 2 while : do modprobe -rv gtp done Splat looks like: [ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp] [ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126 [ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50 [ 753.185801] Call Trace: [ 753.186264] dump_stack+0x7c/0xbb [ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.187583] print_address_description+0xc7/0x240 [ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189846] __kasan_report+0x12a/0x16f [ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.191298] kasan_report+0xe/0x20 [ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp] [ 753.192580] ? __netlink_ns_capable+0xc3/0xf0 [ 753.193370] __rtnl_newlink+0xb9f/0x11b0 [ ... ] [ 753.241201] Allocated by task 7186: [ 753.241844] save_stack+0x19/0x80 [ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 753.243192] __kmalloc+0x13e/0x300 [ 753.243764] ops_init+0xd6/0x350 [ 753.244314] register_pernet_operations+0x249/0x6f0 [ ... ] [ 753.251770] Freed by task 7178: [ 753.252288] save_stack+0x19/0x80 [ 753.252833] __kasan_slab_free+0x111/0x150 [ 753.253962] kfree+0xc7/0x280 [ 753.254509] ops_free_list.part.11+0x1c4/0x2d0 [ 753.255241] unregister_pernet_operations+0x262/0x390 [ ... ] [ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next. [ 753.287241] ------------[ cut here ]------------ [ 753.287794] kernel BUG at lib/list_debug.c:25! [ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50 [ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0 [ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b [ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286 [ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000 [ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69 [ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21 [ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878 [ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458 [ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0 [ 753.302183] Call Trace: [ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp] [ 753.303037] ? __netlink_ns_capable+0xc3/0xf0 [ 753.303576] __rtnl_newlink+0xb9f/0x11b0 [ 753.304092] ? rtnl_link_unregister+0x230/0x230 Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit 1788b856 ] gtp_encap_destroy() is called twice. 1. When interface is deleted. 2. When udp socket is destroyed. either gtp->sk0 or gtp->sk1u could be freed by sock_put() in gtp_encap_destroy(). so, when gtp_encap_destroy() is called again, it would uses freed sk pointer. patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected by rtnl_lock. so, rtnl_lock() is added. Test command: gtp-link add gtp1 & killall gtp-link ip link del gtp1 Splat looks like: [ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0 [ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008 [ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50 [ 83.188469] Call Trace: [ ... ] [ 83.200126] lock_acquire+0x141/0x380 [ 83.200575] ? lock_sock_nested+0x3a/0xf0 [ 83.201069] _raw_spin_lock_bh+0x38/0x70 [ 83.201551] ? lock_sock_nested+0x3a/0xf0 [ 83.202044] lock_sock_nested+0x3a/0xf0 [ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp] [ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp] [ 83.203687] gtp_dellink+0x56/0x170 [gtp] [ 83.204190] rtnl_delete_link+0xb4/0x100 [ ... ] [ 83.236513] Allocated by task 976: [ 83.236925] save_stack+0x19/0x80 [ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 83.237894] kmem_cache_alloc+0xd8/0x280 [ 83.238360] sk_prot_alloc.isra.42+0x50/0x200 [ 83.238874] sk_alloc+0x32/0x940 [ 83.239264] inet_create+0x283/0xc20 [ 83.239684] __sock_create+0x2dd/0x540 [ 83.240136] __sys_socket+0xca/0x1a0 [ 83.240550] __x64_sys_socket+0x6f/0xb0 [ 83.240998] do_syscall_64+0x9c/0x450 [ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 83.242061] [ 83.242249] Freed by task 0: [ 83.242616] save_stack+0x19/0x80 [ 83.243013] __kasan_slab_free+0x111/0x150 [ 83.243498] kmem_cache_free+0x89/0x250 [ 83.244444] __sk_destruct+0x38f/0x5a0 [ 83.245366] rcu_core+0x7e9/0x1c20 [ 83.245766] __do_softirq+0x213/0x8fa Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 3f167e19 ] ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ #50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit e198987e ] gtp_encap_enable_socket() and gtp_encap_destroy() are not protected by rcu_read_lock(). and it's not safe to write sk->sk_user_data. This patch make these functions to use lock_sock() instead of rcu_dereference_sk_user_data(). Test commands: gtp-link add gtp1 Splat looks like: [ 83.238315] ============================= [ 83.239127] WARNING: suspicious RCU usage [ 83.239702] 5.2.0-rc6+ #49 Not tainted [ 83.240268] ----------------------------- [ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage! [ 83.243828] [ 83.243828] other info that might help us debug this: [ 83.243828] [ 83.246325] [ 83.246325] rcu_scheduler_active = 2, debug_locks = 1 [ 83.247314] 1 lock held by gtp-link/1008: [ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0 [ 83.251503] [ 83.251503] stack backtrace: [ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49 [ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 83.254562] Call Trace: [ 83.254995] dump_stack+0x7c/0xbb [ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp] [ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp] [ 83.257161] ? memset+0x1f/0x40 [ 83.257843] gtp_newlink+0x90/0xa21 [gtp] [ 83.258497] ? __netlink_ns_capable+0xc3/0xf0 [ 83.259260] __rtnl_newlink+0xb9f/0x11b0 [ 83.260022] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by:
-
csonsino authored
[ Upstream commit c49a8682 ] Problem: The Linux Bluetooth stack yields complete control over the BLE connection interval to the remote device. The Linux Bluetooth stack provides access to the BLE connection interval min and max values through /sys/kernel/debug/bluetooth/hci0/ conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval. These values are used for initial BLE connections, but the remote device has the ability to request a connection parameter update. In the event that the remote side requests to change the connection interval, the Linux kernel currently only validates that the desired value is within the acceptable range in the Bluetooth specification (6 - 3200, corresponding to 7.5ms - 4000ms). There is currently no validation that the desired value requested by the remote device is within the min/max limits specified in the conn_min_interval/conn_max_interval configurations. This essentially leads to Linux yielding complete control over the connection interval to the remote device. The proposed patch adds a verification step to the connection parameter update mechanism, ensuring that the desired value is within the min/max bounds of the current connection. If the desired value is outside of the current connection min/max values, then the connection parameter update request is rejected and the negative response is returned to the remote device. Recall that the initial connection is established using the local conn_min_interval/conn_max_interval values, so this allows the Linux administrator to retain control over the BLE connection interval. The one downside that I see is that the current default Linux values for conn_min_interval and conn_max_interval typically correspond to 30ms and 50ms respectively. If this change were accepted, then it is feasible that some devices would no longer be able to negotiate to their desired connection interval values. This might be remedied by setting the default Linux conn_min_interval and conn_max_interval values to the widest supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same behavior as the current implementation, where the remote device could request to change the connection interval value to any value that is permitted by the Bluetooth specification, and Linux would accept the desired value. Signed-off-by:
Carey Sonsino <csonsino@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit e30155fd ] If an invalid role is sent from user space, gtp_encap_enable() will fail. Then, it should call gtp_encap_disable_sock() but current code doesn't. It makes memory leak. Fixes: 91ed81f9 ("gtp: support SGSN-side tunnels") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit dcae9052 ] This change is similar to commit a1616a5a ("Bluetooth: hidp: fix buffer overflow") but for the compat ioctl. We take a string from the user and forgot to ensure that it's NUL terminated. I have also changed the strncpy() in to strscpy() in hidp_setup_hid(). The difference is the strncpy() doesn't necessarily NUL terminate the destination string. Either change would fix the problem but it's nice to take a belt and suspenders approach and do both. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Matias Karhumaa authored
[ Upstream commit 28261da8 ] Because of both sides doing L2CAP disconnection at the same time, it was possible to receive L2CAP Disconnection Response with CID that was already freed. That caused problems if CID was already reused and L2CAP Connection Request with same CID was sent out. Before this patch kernel deleted channel context regardless of the state of the channel. Example where leftover Disconnection Response (frame #402) causes local device to delete L2CAP channel which was not yet connected. This in turn confuses remote device's stack because same CID is re-used without properly disconnecting. Btmon capture before patch: ** snip ** > ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499 L2CAP: Disconnection Request (0x06) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548 L2CAP: Disconnection Response (0x07) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 = bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447 > HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397 L2CAP: Connection Request (0x02) ident 27 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441 L2CAP: Connection Response (0x03) ident 27 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449 L2CAP: Configure Request (0x04) ident 19 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Similar case after the patch: *snip* > ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143 L2CAP: Disconnection Request (0x06) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073 L2CAP: Connection Request (0x02) ident 12 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371 L2CAP: Disconnection Response (0x07) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196 L2CAP: Configure Request (0x04) ident 13 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804 L2CAP: Connection Response (0x03) ident 12 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Fix is to check that channel is in state BT_DISCONN before deleting the channel. This bug was found while fuzzing Bluez's OBEX implementation using Synopsys Defensics. Reported-by:
Matti Kamunen <matti.kamunen@synopsys.com> Reported-by:
Ari Timonen <ari.timonen@synopsys.com> Signed-off-by:
Matias Karhumaa <matias.karhumaa@gmail.com> Signed-off-by:
-
Seeteena Thoufeek authored
[ Upstream commit bff5a556 ] 'probe libc's inet_pton & backtrace it with ping' testcase sometimes fails on powerpc because distro ping binary does not have symbol information and thus it prints "[unknown]" function name in the backtrace. Accept "[unknown]" as valid function name for powerpc as well. # perf test -v "probe libc's inet_pton & backtrace it with ping" Before: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79695 ping 79718 [077] 96483.787025: probe_libc:inet_pton: (7fff83a754c8) 7fff83a754c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fff83a2b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fff83a2c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 1171830f4 [unknown] (/usr/bin/ping) FAIL: expected backtrace entry ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" got "1171830f4 [unknown] (/usr/bin/ping)" test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! After: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79085 ping 79108 [045] 96400.214177: probe_libc:inet_pton: (7fffbb9654c8) 7fffbb9654c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fffbb91b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fffbb91c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 132e830f4 [unknown] (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok Signed-off-by:
Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Reviewed-by:
Kim Phillips <kim.phillips@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan@linux.ibm.com> Fixes: 16329364 ("perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo") Link: http://lkml.kernel.org/r/1561630614-3216-1-git-send-email-s1seetee@linux.vnet.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Shijith Thotton authored
[ Upstream commit c09cb129 ] The NMI handlers handle_percpu_devid_fasteoi_nmi() and handle_fasteoi_nmi() do not update the interrupt counts. Due to that the NMI interrupt count does not show up correctly in /proc/interrupts. Add the statistics and treat the NMI handlers in the same way as per cpu interrupts and prevent them from updating irq_desc::tot_count as this might be corrupted due to concurrency. [ tglx: Massaged changelog ] Fixes: 2dcf1fbc ("genirq: Provide NMI handlers") Signed-off-by:
Shijith Thotton <sthotton@marvell.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562313336-11888-1-git-send-email-sthotton@marvell.comSigned-off-by:
-
Josua Mayer authored
[ Upstream commit b188b032 ] Handle overlooked case where the target address is assigned to a peer and neither route nor gateway exist. For one peer, no checks are performed to see if it is meant to receive packets for a given address. As soon as there is a second peer however, checks are performed to deal with routes and gateways for handling complex setups with multiple hops to a target address. This logic assumed that no route and no gateway imply that the destination address can not be reached, which is false in case of a direct peer. Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by:
Michael Scott <mike@foundries.io> Signed-off-by:
Josua Mayer <josua.mayer@jm0.eu> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit 881cec4f ] Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3501 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit 44d34af2 ] Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3491 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
-
Tomas Bortoli authored
[ Upstream commit 4ce9146e ] Syzkaller found that it is possible to provoke a memory leak by never freeing rx_skb in struct bcsp_struct. Fix by freeing in bcsp_close() Signed-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com Signed-off-by:
-
Jian Shen authored
[ Upstream commit 2d5066fc ] For revision 0x20, the broadcast promisc is enabled by firmware, it's unnecessary to enable it when initializing VF. For revision 0x21, it's necessary to enable broadcast promisc mode when initializing or re-initializing VF, otherwise, it will be unable to send and receive promisc packets. Fixes: f01f5559 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit aa52bcbe ] Michael reported crash with by bpf program in json mode on powerpc: # bpftool prog -p dump jited id 14 [{ "name": "0xd00000000a9aa760", "insns": [{ "pc": "0x0", "operation": "nop", "operands": [null ] },{ "pc": "0x4", "operation": "nop", "operands": [null ] },{ "pc": "0x8", "operation": "mflr", Segmentation fault (core dumped) The code is assuming char pointers in format, which is not always true at least for powerpc. Fixing this by dumping the whole string into buffer based on its format. Please note that libopcodes code does not check return values from fprintf callback, but as per Jakub suggestion returning -1 on allocation failure so we do the best effort to propagate the error. Fixes: 107f0412 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command") Reported-by:
Michael Petlan <mpetlan@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 1bcc1fd6 ] After calling of_node_put() on the codec_ep and codec_port variables, they are still being used, which may result in use-after-free. We fix this issue by calling of_node_put() after the last usage. Fixes: fce9b90c ("ASoC: audio-graph-card: cleanup DAI link loop method - step2") Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562229530-8121-1-git-send-email-wen.yang99@zte.com.cnSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 3285170f ] Commit 372e722e ("gpiolib: use descriptors internally") renamed the functions to use a "gpiod" prefix, and commit 79a9becd ("gpiolib: export descriptor-based GPIO interface") introduced the "raw" variants, but both changes forgot to update the comments. Readd a similar reference to gpiod_set_value(), which was accidentally removed by commit 1e77fc82 ("gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()"). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.beSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 9d1bc24b ] bond_xmit_roundrobin() checks for IGMP packets but it parses the IP header even before checking skb->protocol. We should validate the IP header with pskb_may_pull() before using iph->protocol. Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com Fixes: a2fd940f ("bonding: fix broken multicast with round-robin mode") Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jiri Benc authored
[ Upstream commit 11aca65e ] Selftests are reporting this failure in test_lwt_seg6local.sh: + ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2 Error fetching program/map! Failed to parse eBPF program: Operation not permitted The problem is __attribute__((always_inline)) alone is not enough to prevent clang from inserting those functions in .text. In that case, .text is not marked as relocateable. See the output of objdump -h test_lwt_seg6local.o: Idx Name Size VMA LMA File off Algn 0 .text 00003530 0000000000000000 0000000000000000 00000040 2**3 CONTENTS, ALLOC, LOAD, READONLY, CODE This causes the iproute bpf loader to fail in bpf_fetch_prog_sec: bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no relocateable .text section in the file. To fix this, convert to 'static __always_inline'. v2: Use 'static __always_inline' instead of 'static inline __attribute__((always_inline))' Fixes: c99a84ea ("selftests/bpf: test for seg6local End.BPF action") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Leo Yan authored
[ Upstream commit 33bae185 ] Based on the following report from Smatch, fix the potential NULL pointer dereference check: tools/lib/bpf/libbpf.c:3493 bpf_prog_load_xattr() warn: variable dereferenced before check 'attr' (see line 3483) 3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr, 3480 struct bpf_object **pobj, int *prog_fd) 3481 { 3482 struct bpf_object_open_attr open_attr = { 3483 .file = attr->file, 3484 .prog_type = attr->prog_type, ^^^^^^ 3485 }; At the head of function, it directly access 'attr' without checking if it's NULL pointer. This patch moves the values assignment after validating 'attr' and 'attr->file'. Signed-off-by:
Leo Yan <leo.yan@linaro.org> Acked-by:
-
Andrii Nakryiko authored
[ Upstream commit cdfc7f88 ] GCC8 started emitting warning about using strncpy with number of bytes exactly equal destination size, which is generally unsafe, as can lead to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number of bytes to ensure name is always zero-terminated. Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 99f0eae6 ] If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the trace line that rxrpc_extract_header() tries to emit when a protocol error occurs (typically because the packet is short) because the call argument is NULL. Fix this by using ?: to assume 0 as the debug_id if call is NULL. This can then be induced by: echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001 where addr has the following program running on it: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/rxrpc.h> int main(void) { struct sockaddr_rxrpc srx; int fd; memset(&srx, 0, sizeof(srx)); srx.srx_family = AF_RXRPC; srx.srx_service = 0; srx.transport_type = AF_INET; srx.transport_len = sizeof(srx.transport.sin); srx.transport.sin.sin_family = AF_INET; srx.transport.sin.sin_port = htons(0x4e21); fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6); bind(fd, (struct sockaddr *)&srx, sizeof(srx)); sleep(20); return 0; } It results in the following oops. BUG: kernel NULL pointer dereference, address: 0000000000000340 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac ... Call Trace: <IRQ> rxrpc_extract_header+0x86/0x171 ? rcu_read_lock_sched_held+0x5d/0x63 ? rxrpc_new_skb+0xd4/0x109 rxrpc_input_packet+0xef/0x14fc ? rxrpc_input_data+0x986/0x986 udp_queue_rcv_one_skb+0xbf/0x3d0 udp_unicast_rcv_skb.isra.8+0x64/0x71 ip_protocol_deliver_rcu+0xe4/0x1b4 ip_local_deliver+0xf0/0x154 __netif_receive_skb_one_core+0x50/0x6c netif_receive_skb_internal+0x26b/0x2e9 napi_gro_receive+0xf8/0x1da rtl8169_poll+0x303/0x4c4 net_rx_action+0x10e/0x333 __do_softirq+0x1a5/0x38f irq_exit+0x54/0xc4 do_IRQ+0xda/0xf8 common_interrupt+0xf/0xf </IRQ> ... ? cpuidle_enter_state+0x23c/0x34d cpuidle_enter+0x2a/0x36 do_idle+0x163/0x1ea cpu_startup_entry+0x1d/0x1f start_secondary+0x157/0x172 secondary_startup_64+0xa4/0xb0 Fixes: a25e21f0 ("rxrpc, afs: Use debug_ids rather than pointers in traces") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Phong Tran authored
[ Upstream commit 78226f6e ] This is for fixing bug KMSAN: uninit-value in ax88772_bind Tested by https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com syzbot found the following crash on: HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c git tree: kmsan console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000 kernel config: https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a dashboard link: https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e compiler: clang version 9.0.0 (/home/glider/llvm/clang 06d00afa61eef8f7f501ebdb4e8612ea43ec2d78) syz repro: https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000 ================================================================== BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:200 [inline] BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 is_valid_ether_addr include/linux/etherdevice.h:200 [inline] asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728 usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027 generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210 usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432 process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269 process_scheduled_works kernel/workqueue.c:2331 [inline] worker_thread+0x189c/0x2460 kernel/workqueue.c:2417 kthread+0x4b5/0x4f0 kernel/kthread.c:254 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Signed-off-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
-
Guilherme G. Piccoli authored
[ Upstream commit 3c91f25c ] Currently bnx2x ptp worker tries to read a register with timestamp information in case of TX packet timestamping and in case it fails, the routine reschedules itself indefinitely. This was reported as a kworker always at 100% of CPU usage, which was narrowed down to be bnx2x ptp_task. By following the ioctl handler, we could narrow down the problem to an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with RX filter zeroed; this isn't reproducible for example with ptp4l (from linuxptp) since this tool requests a supported RX filter. It seems NIC FW timestamp mechanism cannot work well with RX_FILTER_NONE - driver's PTP filter init routine skips a register write to the adapter if there's not a supported filter request. This patch addresses the problem of bnx2x ptp thread's everlasting reschedule by retrying the register read 10 times; between the read attempts the thread sleeps for an increasing amount of time starting in 1ms to give FW some time to perform the timestamping. If it still fails after all retries, we bail out in order to prevent an unbound resource consumption from bnx2x. The patch also adds an ethtool statistic for accounting the skipped TX timestamp packets and it reduces the priority of timestamping error messages to prevent log flooding. The code was tested using both linuxptp and chrony. Reported-and-tested-by:
Przemyslaw Hausman <przemyslaw.hausman@canonical.com> Suggested-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by:
-
Taehee Yoo authored
[ Upstream commit 7c31e54a ] __vxlan_dev_create() destroys FDB using specific pointer which indicates a fdb when error occurs. But that pointer should not be used when register_netdevice() fails because register_netdevice() internally destroys fdb when error occurs. This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev internally. Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan dev. vxlan_fdb_insert() is called after calling register_netdevice(). This routine can avoid situation that ->ndo_uninit() destroys fdb entry in error path of register_netdevice(). Hence, error path of __vxlan_dev_create() routine can have an opportunity to destroy default fdb entry by hand. Test command ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \ dev enp0s9 dstport 4789 Splat looks like: [ 213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256 [ 213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan] [ 213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d [ 213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202 [ 213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000 [ 213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0 [ 213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000 [ 213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200 [ 213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0 [ 213.402178] FS: 00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 [ 213.402178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0 [ 213.402178] Call Trace: [ 213.402178] __vxlan_dev_create+0x3a9/0x7d0 [vxlan] [ 213.402178] ? vxlan_changelink+0x740/0x740 [vxlan] [ 213.402178] ? rcu_read_unlock+0x60/0x60 [vxlan] [ 213.402178] ? __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 213.402178] vxlan_newlink+0x8d/0xc0 [vxlan] [ 213.402178] ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan] [ 213.554119] ? __netlink_ns_capable+0xc3/0xf0 [ 213.554119] __rtnl_newlink+0xb75/0x1180 [ 213.554119] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 0241b836 ("vxlan: fix default fdb entry netlink notify ordering during netdev create") Suggested-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Andi Kleen authored
[ Upstream commit 2f87f33f ] The metric group code tries to find a group it added earlier in the evlist. Fix the lookup to handle groups with partially overlaps correctly. When a sub string match fails and we reset the match, we have to compare the first element again. I also renamed the find_evsel function to find_evsel_group to make its purpose clearer. With the earlier changes this fixes: Before: % perf stat -M UPI,IPC sleep 1 ... 1,032,922 uops_retired.retire_slots # 1.1 UPI 1,896,096 inst_retired.any 1,896,096 inst_retired.any 1,177,254 cpu_clk_unhalted.thread After: % perf stat -M UPI,IPC sleep 1 ... 1,013,193 uops_retired.retire_slots # 1.1 UPI 932,033 inst_retired.any 932,033 inst_retired.any # 0.9 IPC 1,091,245 cpu_clk_unhalted.thread Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Andi Kleen authored
[ Upstream commit 6c5f4e5c ] Event merging is mainly to collapse similar events in lots of different duplicated PMUs. It can break metric displaying. It's possible for two metrics to have the same event, and when the two events happen in a row the second wouldn't be displayed. This would also not show the second metric. To avoid this don't merge events in the same PMU. This makes sense, if we have multiple events in the same PMU there is likely some reason for it (e.g. using multiple groups) and we better not merge them. While in theory it would be possible to construct metrics that have events with the same name in different PMU no current metrics have this problem. This is the fix for perf stat -M UPI,IPC (needs also another bug fix to completely work) Signed-off-by:
-
Andi Kleen authored
[ Upstream commit e3a94273 ] Since Fixes: 8c5421c0 ("perf pmu: Display pmu name when printing unmerged events in stat") using --no-merge adds the PMU name to the evsel name. This breaks the metric value lookup because the parser doesn't know about this. Remove the extra postfixes for the metric evaluation. Signed-off-by:
-
Andi Kleen authored
[ Upstream commit 145c407c ] After setting up metric groups through the event parser, the metricgroup code looks them up again in the event list. Make sure we only look up events that haven't been used by some other metric. The data structures currently cannot handle more than one metric per event. This avoids problems with multiple events partially overlapping. Signed-off-by:
-
Rander Wang authored
[ Upstream commit 7c2b3629 ] To save power, the hda hdmi driver in ASoC invokes snd_hdac_ext_bus_link_put to disable CORB/RIRB buffers DMA if there is no user of bus and invokes snd_hdac_ext_bus_link_get to set up CORB/RIRB buffers when it is used. Unsolicited responses is disabled in snd_hdac_bus_stop_cmd_io called by snd_hdac_ext_bus_link_put , but it is not enabled in snd_hdac_bus_init_cmd_io called by snd_hdac_ext_bus_link_get. So for put-get sequence, Unsolicited responses is disabled and headphone can't be detected by hda codecs. Now unsolicited responses is only enabled in snd_hdac_bus_reset_link which resets controller. The function is only called for setup of controller. This patch enables Unsolicited responses after RIRB is initialized in snd_hdac_bus_init_cmd_io which works together with snd_hdac_bus_reset_link to set up controller. Tested legacy hda driver and SOF driver on intel whiskeylake. Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit d77b1ad8 ] The current logic assumes that the RDMA driver uses one statistics context adjacent to the ones used by the network driver. This assumption is not true and the statistics context used by the RDMA driver is tied to its MSIX base vector. This wrong assumption can cause RDMA driver failure after changing ethtool rings on the network side. Fix the statistics reservation logic accordingly. Fixes: 780baad4 ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit c20dc142 ] Some chips with older firmware can continue to perform DMA read from context memory even after the memory has been freed. In the PCI shutdown method, we need to call pci_disable_device() to shutdown DMA to prevent this DMA before we put the device into D3hot. DMA memory request in D3hot state will generate PCI fatal error. Similarly, in the driver remove method, the context memory should only be freed after DMA has been shutdown for correctness. Fixes: 98f04cf0 ("bnxt_en: Check context memory requirements from firmware.") Signed-off-by:
-
Shahar S Matityahu authored
[ Upstream commit fc838c77 ] The driver should delay only in recording stop flow between writing to DBGC_IN_SAMPLE register and DBGC_OUT_CTRL register. Any other delay is not needed. Change the following: 1. Remove any unnecessary delays in the flow 2. Increase the delay in the stop recording flow since 100 micro is not enough 3. Use usleep_range instead of delay since the driver is allowed to sleep in this flow. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 5cfe79c8 ("iwlwifi: fw: stop and start debugging using host command") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
He Zhe authored
[ Upstream commit 5d154984 ] Since v5.1-rc1, some types of packets do not get unreachable reply with the following iptables setting. Fox example, $ iptables -A INPUT -p icmp --icmp-type 8 -j REJECT $ ping 127.0.0.1 -c 1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. — 127.0.0.1 ping statistics — 1 packets transmitted, 0 received, 100% packet loss, time 0ms We should have got the following reply from command line, but we did not. From 127.0.0.1 icmp_seq=1 Destination Port Unreachable Yi Zhao reported it and narrowed it down to: 7fc38225 ("netfilter: reject: skip csum verification for protocols that don't support it"), This is because nf_ip_checksum still expects pseudo-header protocol type 0 for packets that are of neither TCP or UDP, and thus ICMP packets are mistakenly treated as TCP/UDP. This patch corrects the conditions in nf_ip_checksum and all other places that still call it with protocol 0. Fixes: 7fc38225 ("netfilter: reject: skip csum verification for protocols that don't support it") Reported-by:
Yi Zhao <yi.zhao@windriver.com> Signed-off-by:
He Zhe <zhe.he@windriver.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Baruch Siach authored
[ Upstream commit 0472301a ] Merge commit 1c8c5a9d ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the fix from commit 36f9814a ("bpf: fix uapi hole for 32 bit compat applications") by taking the gpl_compatible 1-bit field definition from commit b85fab0e ("bpf: Add gpl_compatible flag to struct bpf_prog_info") as is. That breaks architectures with 16-bit alignment like m68k. Add 31-bit pad after gpl_compatible to restore alignment of following fields. Thanks to Dmitry V. Levin his analysis of this bug history. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Acked-by:
Song Liu <songliubraving@fb.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrei Otcheretianski authored
[ Upstream commit ac70499e ] In some buggy scenarios we could possible attempt to transmit frames larger than maximum MSDU size. Since our devices don't know how to handle this, it may result in asserts, hangs etc. This can happen, for example, when we receive a large multicast frame and try to transmit it back to the air in AP mode. Since in a legal scenario this should never happen, drop such frames and warn about it. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
-
Dann Frazier authored
[ Upstream commit 92924064 ] An ipsec structure will not be allocated if the hardware does not support offload. Fixes the following Oops: [ 191.045452] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 191.054232] Mem abort info: [ 191.057014] ESR = 0x96000004 [ 191.060057] Exception class = DABT (current EL), IL = 32 bits [ 191.065963] SET = 0, FnV = 0 [ 191.069004] EA = 0, S1PTW = 0 [ 191.072132] Data abort info: [ 191.074999] ISV = 0, ISS = 0x00000004 [ 191.078822] CM = 0, WnR = 0 [ 191.081780] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000043d9e467 [ 191.088382] [0000000000000000] pgd=0000000000000000 [ 191.093252] Internal error: Oops: 96000004 [#1] SMP [ 191.098119] Modules linked in: vhost_net vhost tap vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter devlink ebtables ip6table_filter ip6_tables iptable_filter bpfilter ipmi_ssif nls_iso8859_1 input_leds joydev ipmi_si hns_roce_hw_v2 ipmi_devintf hns_roce ipmi_msghandler cppc_cpufreq sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 ses enclosure btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c raid1 raid0 multipath linear ixgbevf hibmc_drm ttm [ 191.168607] drm_kms_helper aes_ce_blk aes_ce_cipher syscopyarea crct10dif_ce sysfillrect ghash_ce qla2xxx sysimgblt sha2_ce sha256_arm64 hisi_sas_v3_hw fb_sys_fops sha1_ce uas nvme_fc mpt3sas ixgbe drm hisi_sas_main nvme_fabrics usb_storage hclge scsi_transport_fc ahci libsas hnae3 raid_class libahci xfrm_algo scsi_transport_sas mdio aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [ 191.202952] CPU: 94 PID: 0 Comm: swapper/94 Not tainted 4.19.0-rc1+ #11 [ 191.209553] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.20.01 04/26/2019 [ 191.218064] pstate: 20400089 (nzCv daIf +PAN -UAO) [ 191.222873] pc : ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe] [ 191.228093] lr : ixgbe_msg_task+0x2d0/0x1088 [ixgbe] [ 191.233044] sp : ffff000009b3bcd0 [ 191.236346] x29: ffff000009b3bcd0 x28: 0000000000000000 [ 191.241647] x27: ffff000009628000 x26: 0000000000000000 [ 191.246946] x25: ffff803f652d7600 x24: 0000000000000004 [ 191.252246] x23: ffff803f6a718900 x22: 0000000000000000 [ 191.257546] x21: 0000000000000000 x20: 0000000000000000 [ 191.262845] x19: 0000000000000000 x18: 0000000000000000 [ 191.268144] x17: 0000000000000000 x16: 0000000000000000 [ 191.273443] x15: 0000000000000000 x14: 0000000100000026 [ 191.278742] x13: 0000000100000025 x12: ffff8a5f7fbe0df0 [ 191.284042] x11: 000000010000000b x10: 0000000000000040 [ 191.289341] x9 : 0000000000001100 x8 : ffff803f6a824fd8 [ 191.294640] x7 : ffff803f6a825098 x6 : 0000000000000001 [ 191.299939] x5 : ffff000000f0ffc0 x4 : 0000000000000000 [ 191.305238] x3 : ffff000028c00000 x2 : ffff803f652d7600 [ 191.310538] x1 : 0000000000000000 x0 : ffff000000f205f0 [ 191.315838] Process swapper/94 (pid: 0, stack limit = 0x00000000addfed5a) [ 191.322613] Call trace: [ 191.325055] ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe] [ 191.329927] ixgbe_msg_task+0x2d0/0x1088 [ixgbe] [ 191.334536] ixgbe_msix_other+0x274/0x330 [ixgbe] [ 191.339233] __handle_irq_event_percpu+0x78/0x270 [ 191.343924] handle_irq_event_percpu+0x40/0x98 [ 191.348355] handle_irq_event+0x50/0xa8 [ 191.352180] handle_fasteoi_irq+0xbc/0x148 [ 191.356263] generic_handle_irq+0x34/0x50 [ 191.360259] __handle_domain_irq+0x68/0xc0 [ 191.364343] gic_handle_irq+0x84/0x180 [ 191.368079] el1_irq+0xe8/0x180 [ 191.371208] arch_cpu_idle+0x30/0x1a8 [ 191.374860] do_idle+0x1dc/0x2a0 [ 191.378077] cpu_startup_entry+0x2c/0x30 [ 191.381988] secondary_start_kernel+0x150/0x1e0 [ 191.386506] Code: 6b15003f 54000320 f1404a9f 54000060 (79400260) Fixes: eda0333a ("ixgbe: add VF IPsec management") Signed-off-by:
Dann Frazier <dann.frazier@canonical.com> Acked-by:
Shannon Nelson <snelson@pensando.io> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit bc3781ed ] Local device and link partner config auto-negotiation on both, local device config pause frame use as: rx on/tx off, link partner config pause frame use as: rx off/tx on. We except the result is: Local device: Autonegotiate: on RX: on TX: off RX negotiated: on TX negotiated: off Link partner: Autonegotiate: on RX: off TX: on RX negotiated: off TX negotiated: on But actually, the result of Local device and link partner is both: Autonegotiate: on RX: off TX: off RX negotiated: off TX negotiated: off The root cause is that the supported flag is has only Pause, reference to the function genphy_config_advert(): static int genphy_config_advert(struct phy_device *phydev) { ... linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); ... } The pause frame use of link partner is rx off/tx on, so its advertising only set the bit Asym_Pause, and the supported is only set the bit Pause, so the result of linkmode_and(), is rx off/tx off. This patch adds Asym_Pause to the supported flag to fix it. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Vedang Patel authored
[ Upstream commit 1e08511d ] If a packet which is utilizing the launchtime feature (via SO_TXTIME socket option) also requests the hardware transmit timestamp, the hardware timestamp is not delivered to the userspace. This is because the value in skb->tstamp is mistaken as the software timestamp. Applications, like ptp4l, request a hardware timestamp by setting the SOF_TIMESTAMPING_TX_HARDWARE socket option. Whenever a new timestamp is detected by the driver (this work is done in igb_ptp_tx_work() which calls igb_ptp_tx_hwtstamps() in igb_ptp.c[1]), it will queue the timestamp in the ERR_QUEUE for the userspace to read. When the userspace is ready, it will issue a recvmsg() call to collect this timestamp. The problem is in this recvmsg() call. If the skb->tstamp is not cleared out, it will be interpreted as a software timestamp and the hardware tx timestamp will not be successfully sent to the userspace. Look at skb_is_swtx_tstamp() and the callee function __sock_recv_timestamp() in net/socket.c for more details. Signed-off-by:
Vedang Patel <vedang.patel@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
