- 10 Mar, 2018 11 commits
-
-
Brian Masney authored
The bits for setting up the proximity diode were not setup correctly and this was causing the proximity sensor to not function correctly. This patch sets up the correct bit mask in tsl2x7x_chip_on() based on what the data sheet expects. From page 35 of the TSL2771 data sheet: https://ams.com/eng/content/download/250264/976045/file/TSL2771_DS000105_3-00.pdf - Bits 0-1 is the ALS gain control - Bits 2-3 is reserved (The proximity gain control on other tsl2x7x chips) - Bits 4-5 is the proximity diode select - Bits 6-7 is the LED drive strength tsl2x7x_chip_on() had the power and diode hardcoded, so these are extracted out into the settings so that these fields can be configured in the platform data. The default prox_gain is changed from 1 (2X gain) to 0 (1X gain) since the proximity gain control on the TSL2771, TMD2771, and other chips have these fields listed as reserved, and to write 0 into those bits. Verified that the proximity sensor now works correctly on a TSL2771 hooked up to a Raspberry Pi 2. Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Brian Masney authored
The tsl2771 and tmd2771 devices create the in_proximity0_calibscale_available sysfs attribute. These two particular devices do not support changing the proximity gain value on the chip so this patch removes that sysfs attribute. As expected, these two devices already did not create the IIO_CHAN_INFO_CALIBSCALE channel and proximity0_calibrate sysfs attribute. Page 38 of the tsl2772 data sheet shows that the proximity gain can be adjusted with bits 2-3 on the control register: https://ams.com/eng/content/download/291503/1066377/file/TSL2772_DS000181_2-00.pdf Page 35 of the tsl2771 and tmd2771 data sheets shows that bits 2-3 on the control register are reserved and changing the proximity gain is not supported: https://ams.com/eng/content/download/250264/976045/file/TSL2771_DS000105_3-00.pdf https://ams.com/eng/content/download/250283/976077/file/TMD2771_DS000177_2-00.pdfSigned-off-by:
-
Brian Masney authored
The functions in_illuminance0_calibrate_store() and in_illuminance0_lux_table_store() did not have complete error handling in place. This patch adds the missing error handling. Signed-off-by:
-
Brian Masney authored
tsl2x7x_prox_cal() did not have any error checks. This patch adds the missing error handling and ensures that any errors are reported to user space via in_proximity0_calibrate_store(). Signed-off-by:
-
Brian Masney authored
The statP and calP variables triggered an 'Avoid CamelCase' warning from checkpatch.pl. This patch renames these variables to stat and cal to fix this warning. Signed-off-by:
-
Brian Masney authored
Not all errors that occurred in tsl2x7x_get_prox() were correctly reported in the return value. This patch changes the error handling so that errors are now returned properly. Note that the ret variable is from the call to tsl2x7x_read_status(), and it already has the correct error check. The -EINVAL error code is for an unexpected value in the register. This patch also corrects an unnecessary word wrap in the call to le16_to_cpup() while changes are being made to this code. Signed-off-by:
-
Brian Masney authored
The driver uses mutex_lock() and mutex_trylock() in several places. Convert the mutex_trylock() to mutex_lock() for consistency with other IIO light drivers in mainline. Signed-off-by:
-
Brian Masney authored
There were four places where the same chunk of code was used to write to the control register. This patch creates a common function tsl2x7x_write_control_reg() to reduce duplicate code. The function tsl2x7x_chip_off() did not correctly return an error code so this patch also corrects that issue. Signed-off-by:
-
Brian Masney authored
There were three places where the same chunk of code was used to read the chip status. This patch creates a common function tsl2x7x_read_status() to reduce duplicate code. This patch also corrects tsl2x7x_event_handler() to properly check for an error after reading the chip status. Signed-off-by:
-
Brian Masney authored
There were three places where the same chunk of code was used to clear interrupts. This patch creates a common function tsl2x7x_clear_interrupts() to reduce duplicate code. Signed-off-by:
-
Brian Masney authored
The tsl2X7X_platform_data structure contains the platform_power, power_on, and power_off function pointers. These power management functions should not be in the platform data. These functions were likely used before the regulator framework was put in place. There are no users of these functions in the mainline kernel. Signed-off-by:
-
- 07 Mar, 2018 12 commits
-
-
Shreeya Patel authored
Use sign_extend32 function instead of manually coding it. Signed-off-by:
Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by:
-
Shreeya Patel authored
Adjust a switch block to explicitly match channels and return -EINVAL as default case which makes the code semantically more clear. Signed-off-by:
-
Shreeya Patel authored
Make some of the macro names according to the names given in the datasheet of the adis16209 driver. Signed-off-by:
-
Shreeya Patel authored
Remove some unnecessay comments and group the control register and register field macros together. Some of the register names does not make it's puporse very clear and hence, add some comments for more information. Also there are certain unit based comments which are not providing sufficient information, so expand those comments. Signed-off-by:
-
Himanshu Jha authored
Adding a blank space before/after some returns improves readability. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Himanshu Jha authored
Arrange header files in alphabetical sequence to improve readability. Signed-off-by:
-
Rodrigo Siqueira authored
Usually, functions responsible for reading raw data typically relies on values from iio_chan_info_enum to correctly identify the type of data to be read. There is a set of a device driver that uses the magic number 0 instead of IIO_CHAN_INFO_RAW. This patch improves the readability by replaces the magic number 0 for the appropriate IIO_CHAN_INFO_RAW in six devices driver in the IIO subsystem. Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl checks: staging/iio/meter/ade7854-spi.c:19: CHECK: Alignment should match open parenthesis staging/iio/meter/ade7854-spi.c:44: CHECK: Alignment should match open parenthesis staging/iio/meter/ade7854-spi.c:70: CHECK: Alignment should match open parenthesis staging/iio/meter/ade7854-spi.c:97: CHECK: Alignment should match open parenthesis staging/iio/meter/ade7854-spi.c:125: CHECK: Alignment should match open parenthesis ... Signed-off-by:
-
Rodrigo Siqueira authored
This patch removes the macro IIO_DEV_ATTR_CH_OFF. The macro IIO_DEV_ATTR_CH_OFF is not required, due to the replace of it by the direct use of IIO_DEVICE_ATTR in files staging/iio/meter/ade7759.c and staging/iio/meter/ade7753.c. Signed-off-by:
-
Rodrigo Siqueira authored
The macro IIO_DEV_ATTR_CH_OFF is a wrapper for IIO_DEVICE_ATTR, with a tiny change in the name definition. This extra macro does not improve the readability and also creates some checkpatch errors. This patch fixes the checkpatch.pl errors: staging/iio/meter/ade7753.c:391: ERROR: Use 4 digit octal (0777) not decimal permissions staging/iio/meter/ade7753.c:395: ERROR: Use 4 digit octal (0777) not decimal permissions staging/iio/meter/ade7759.c:331: ERROR: Use 4 digit octal (0777) not decimal permissions staging/iio/meter/ade7759.c:335: ERROR: Use 4 digit octal (0777) not decimal permissions Signed-off-by:
-
HariPrasath Elango authored
dev_dbg includes the function name & line number by default when dynamic debugging is enabled. Hence__func__ is reduntant here and removed. Signed-off-by:
HariPrasath Elango <hariprasath.elango@gmail.com> Signed-off-by:
-
Arushi Singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by:
Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by:
-
- 03 Mar, 2018 10 commits
-
-
Shreeya Patel authored
The defined names for registers does not make it very clear that they are registers and hence, add _REG postfix. This improves the readability of the code. Signed-off-by:
-
Shreeya Patel authored
The change in the definition name makes it then obvious what the units are throughout the driver and there will be no need of the comment. Signed-off-by:
-
Shreeya Patel authored
Arrange the headers in alphabetical order for cleanup purpose. Signed-off-by:
-
Rodrigo Siqueira authored
The function magn_3d_read_raw has a switch statement handling multiple cases per channel. The first case statement uses the magic number 0, which means IIO_CHAN_INFO_RAW. Additionally, the iio_chan_spec for magn_3d_channels is configured to be IIO_CHAN_INFO_RAW. Therefore, this patch replaces the magic number 0 for the appropriate IIO_CHAN_INFO_RAW. Signed-off-by:
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl warning: drivers/iio/dummy/Kconfig:21: WARNING: please write a paragraph that describes the config symbol fully drivers/iio/dummy/Kconfig:27: WARNING: please write a paragraph that describes the config symbol fully This patch expands the explanation about IIO_DUMMY_EVGEN by using the code documentation found in iio/dummy/iio_dummy_evgen.c. In the same way, the information related to IIO_SIMPLE_DUMMY_BUFFER was extracted from file iio_simple_dummy_buffer.c. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Rodrigo Siqueira authored
Kconfig from iio/dummy does not follow the coding style recommendations. According to the coding-style, Lines under a config definition are indented with one tab, while help text is indented an additional two spaces. This patch adds the proper tabulation and space. Signed-off-by:
-
Jeff LaBundy authored
This patch adds support for the On Semiconductor LV0104CS ambient light sensor. Signed-off-by:
Jeff LaBundy <jeff@labundy.com> Signed-off-by:
-
Andy Shevchenko authored
In order to satisfy GPIO ACPI library requirements convert users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Fabrice Gasnier authored
- Add missing pinctrl description. Support is made optional as dfsdm may use internal sources (e.g. via registers) - Fix typo in IIO STM32 DFSDM filter "MANCH_F" description. Basically, this should be "falling edge = logic 0", not "1" that applies to "MANCH_R". BTW, make the description complete by describing both rising/falling edges as described in reference manuals. Fixes: 6c82f947 ("IIO: add DT bindings for stm32 DFSDM filter") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Gwendal Grignou authored
If an application set a tight sampling frequency, given the interrupt use is a wakeup source, suspend will not happen: the kernel will receive a wake up interrupt and will cancel the suspend process. Given cros_ec sensors type is non wake up, this patch adds prepare and complete callbacks to set 1s sampling period just before suspend. This ensures the sensor hub will not be a source of interrupt during the suspend process. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by:
-
- 24 Feb, 2018 5 commits
-
-
Rodrigo Siqueira authored
This patch fixes the checkpatch.pl warning: drivers/staging/iio/meter/ade7854.h:157: WARNING: function definition argument 'struct device *' should also have an identifier name... This commit adds arguments names to the signature declared in the ade7854_state struct. For consistency reason, It also renames all arguments in function definitions. Signed-off-by:
-
Dan Carpenter authored
This shouldn't affect runtime at all, but Smatch complains that we should check if mlx90632_read_ambient_raw() otherwise we "ambient_new_raw" can be uninitialized. drivers/iio/temperature/mlx90632.c:509 mlx90632_calc_ambient_dsp105() error: uninitialized symbol 'ambient_new_raw'. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Crt Mori <cmo@melexis.com> Signed-off-by:
-
Andy Shevchenko authored
Dynamic debug has a run time knob to enable function name printing. Remove this from dev_dbg() calls. Furthermore, functional tracing when enabled can show what function is called, therefore remove empty dev_dbg() calls. Signed-off-by:
-
Quentin Schulz authored
!!'s behaviour isn't that obvious and sparse complained about it, so let's replace it with a ternary condition. Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by:
-
Richard Lai authored
The resistance member in ccs811_reading struct is an unsigned 16-bit integer variable used to store RAW_DATA register bytes read from CCS811. It is kind of misleading to name this struct member as resistance. About the RAW_DATA register bytes, the CCS811 datasheet states that: ----- Two byte read only register which contains the latest readings from the sense resistor. The most significant 6 bits of the Byte 0 contain the value of the current through the sensor (0μA to 63μA). The lower 10 bits contain (as computed from the ADC) the readings of the voltage across the sensor with the selected current (1023 = 1.65V)" ----- Hence, the RAW_DATA register byte contains information about electric current and voltage of the CCS811 sensor. Calling this struct member 'resistance' is kind of misleading, although both electric current and voltage are needed to calculate the electrical resistance of the sensor using Ohm's law, V = I x R, in which a new channel type of IIO_RESISTANCE may be added to the driver in the future. Signed-off-by:
Richard Lai <richard@richardman.com> Signed-off-by:
-
- 23 Feb, 2018 2 commits
-
-
Santha Meena Ramamoorthy authored
Remove blank space after a cast to conform to Linux kernel coding style. Problem found using checkpatch. Signed-off-by:
Santha Meena Ramamoorthy <santhameena13@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Santha Meena Ramamoorthy authored
Match alignment with open parenthesis to conform to Linux kernel coding style. Problem found using checkpatch. Signed-off-by:
-
