- 22 Jul, 2014 12 commits
-
-
Russell King authored
Regular randconfig nightly testing has detected problems with omapdrm. omapdrm fails to build when the kernel is built to support 64-bit DMA addresses and/or 64-bit physical addresses due to an assumption about the width of these types. Use %pad to print DMA addresses, rather than %x or %Zx (which is even more wrong than %x). Avoid passing a uint32_t pointer into a function which expects dma_addr_t pointer. drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1 drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr': drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe': drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init': drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append': drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror] make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1 make[5]: Target `__build' not remade because of errors. make[4]: *** [drivers/gpu/drm/omapdrm] Error 2 Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Russell King authored
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/bochs/bochs_drv.c:100:12: warning: 'bochs_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/bochs/bochs_drv.c:117:12: warning: 'bochs_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by:
-
Russell King authored
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/cirrus/cirrus_drv.c:79:12: warning: 'cirrus_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/cirrus/cirrus_drv.c:96:12: warning: 'cirrus_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by:
-
Russell King authored
drivers/gpu/drm/shmobile/shmob_drm_drv.c:300:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by:
-
Russell King authored
drivers/gpu/drm/rcar-du/rcar_du_drv.c:190:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by:
-
Jean-Francois Moine authored
In tda998x_encoder_destroy(), priv->cec is never NULL, so, remove its test. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Dave Airlie authored
Merge branch 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux into drm-next Evil super powers maintainer abuse, get i915 mst support into -next. * 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux: drm/i915: mst topology dumper in debugfs (v0.2) drm/i915: add DP 1.2 MST support (v0.7) drm/i915: split conversion function out into separate function drm/i915: check connector->encoder before using it. i915: split some DP modesetting code into a separate function drm/i915: add some registers need for displayport MST support.
-
Dave Airlie authored
use the mst helper code to dump the topology in debugfs. v0.2: drop is_mst check - as we want to dump other info Reviewed-by:
Todd Previte <tprevite@gmail.com> Signed-off-by:
-
Dave Airlie authored
This adds DP 1.2 MST support on Haswell systems. Notes: a) this reworks irq handling for DP MST ports, so that we can avoid the mode config locking in the current hpd handlers, as we need to process up/down msgs at a better time. Changes since v0.1: use PORT_PCH_HOTPLUG to detect short vs long pulses add a workqueue to deal with digital events as they can get blocked on the main workqueue beyong mode_config mutex fix a bunch of modeset checker warnings acks irqs in the driver cleanup the MST encoders Changes since v0.2: check irq status again in work handler move around bring up and tear down to fix DPMS on/off use path properties. Changes since v0.3: updates for mst apis more state checker fixes irq handling improvements fbcon handling support improved reference counting of link - fixes redocking. Changes since v0.4: handle gpu reset hpd reinit without oopsing check link status on HPD irqs fix suspend/resume Changes since v0.5: use proper functions to get max link/lane counts fix another checker backtrace - due to connectors disappearing. set output type in more places fro, unknown->displayport don't talk to devices if no HPD asserted check mst on short irqs only check link status properly rebase onto prepping irq changes. drop unsued force_act Changes since v0.6: cleanup unused struct entry. [airlied: fix some sparse warnings]. Reviewed-by:
-
Thierry Reding authored
sparse complains about these functions missing a prototype, but looking closer they aren't (and likely not supposed to be) used outside of this source file, so they can be made static. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Thierry Reding authored
The final parameter to ttm_bo_reserve() is a pointer, therefore callers should use NULL instead of 0. Fixes a bunch of sparse warnings of this type: warning: Using plain integer as NULL pointer Signed-off-by:
-
Thierry Reding authored
The drm_copy_field() function copies strings into userspace buffers, so the first parameter needs to have a __user annotation to avoid warnings from the sparse checker. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
- 21 Jul, 2014 6 commits
-
-
Dave Airlie authored
for MST I need to reuse this, so just move it now. Signed-off-by: -
Dave Airlie authored
DP MST will need connectors that aren't connected to specific encoders, add some checks in advance to avoid oopses. Reviewed-by:
-
Dave Airlie authored
this is just prep work for mst support. Reviewed-by:
-
Dave Airlie authored
These are just from the Haswell spec. Reviewed-by:
-
Sachin Kamat authored
Makes the code a bit more readable. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Sachin Kamat <sachin.kamat@samsung.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dave Airlie authored
Not enough brown paper bags, you'll have to share one. (oops below). The initial match condition code was racy (locking is coming I hear). then along came: cd234b0b drm/i915: Do not dereference NULL crtc or fb until after checking Chris made an attempt to fix it, Ben "reviewed" it. Daniel merged it. Then drm/i915: Make use of intel_fb_obj() (v2) 2ff8fde1 made it worse by removing the obj check later. All in all, my laptop can't barely turn off the display without hitting this. Posted to #intel-gfx out of niceness, but I've merged this already into drm-next. Here's an oops. [ 11.528185] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [ 11.528233] IP: [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.528294] PGD 35bc0067 PUD c997c067 PMD 0 [ 11.528321] Oops: 0000 [#1] SMP [ 11.528916] CPU: 3 PID: 244 Comm: kworker/3:2 Not tainted 3.16.0-rc4+ #17 [ 11.528949] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET72WW (2.22 ) 02/21/2014 [ 11.529004] Workqueue: events intel_edp_psr_work [i915] [ 11.529031] task: ffff8803079fdaa0 ti: ffff8803079c4000 task.ti: ffff8803079c4000 [ 11.529067] RIP: 0010:[<ffffffffa0161fde>] [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.529129] RSP: 0018:ffff8803079c7d40 EFLAGS: 00010246 [ 11.529155] RAX: 0000000000000000 RBX: ffff88030c11c000 RCX: c000000000000000 [ 11.529189] RDX: 0000000000000001 RSI: 1df0000000000000 RDI: ffff88030c1190d8 [ 11.529222] RBP: ffff8803079c7d60 R08: ffffffff82691140 R09: 0000000000000000 [ 11.529256] R10: ffff8803079fdaa0 R11: 3e00000000000000 R12: ffff88030c11c728 [ 11.529290] R13: ffff88030c1190d8 R14: ffff88031e2d8e00 R15: 00000000000000c0 [ 11.529324] FS: 0000000000000000(0000) GS:ffff88031e2c0000(0000) knlGS:0000000000000000 [ 11.529361] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.529389] CR2: 00000000000000d0 CR3: 00000000c8d9d000 CR4: 00000000001407e0 [ 11.529423] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 11.529457] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 11.529489] Stack: [ 11.529500] ffff88030c119000 ffff88030c11c728 ffff88030c1190d8 ffff88031e2d8e00 [ 11.529541] ffff8803079c7d88 ffffffffa01679b2 ffff880035b29a80 ffff880307909f00 [ 11.529583] ffff88031e2d4740 ffff8803079c7df8 ffffffff810a78ab ffffffff810a7849 [ 11.529624] Call Trace: [ 11.529654] [<ffffffffa01679b2>] intel_edp_psr_work+0x52/0x90 [i915] [ 11.529689] [<ffffffff810a78ab>] process_one_work+0x1db/0x540 [ 11.529719] [<ffffffff810a7849>] ? process_one_work+0x179/0x540 [ 11.529750] [<ffffffff810a81ed>] worker_thread+0x11d/0x520 [ 11.529779] [<ffffffff810a80d0>] ? create_and_start_worker+0x60/0x60 [ 11.529810] [<ffffffff810aeb04>] kthread+0xe4/0x100 [ 11.529836] [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200 [ 11.529870] [<ffffffff81705ebc>] ret_from_fork+0x7c/0xb0 [ 11.529896] [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200 [ 11.529926] Code: ba 31 13 f0 c9 85 f6 75 84 eb d0 66 90 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 48 8b 87 68 ff ff ff 48 8b 9f 28 ff ff ff <48> 8b 80 d0 00 00 00 4c 8b 63 28 48 8b 40 48 48 85 c0 0f 84 1a [ 11.530110] RIP [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.530163] RSP <ffff8803079c7d40> [ 11.530180] CR2: 00000000000000d0 Signed-off-by:
-
- 19 Jul, 2014 2 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
misc core patches. * tag 'topic/core-stuff-2014-07-18' of git://anongit.freedesktop.org/drm-intel: drm: Check for connection_mutex in drm_select_eld drm/dp-mst-helper: Don't use uninitialized fields of the sideband message header drm/dp-mst-helper: Avoid reading uninitialized value drm/plane-helper: Use proper plane init function drivers/gpu/drm/drm_buffer.c: remove unnecessary null test before kfree drm: Fix function names in kerneldoc
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- fbc improvements when stolen memory is tight (Ben) - cdclk handling improvements for vlv/chv (Ville) - proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert Eich) - gen8 hw semaphore support (Ben) - more execlist prep work from Oscar Mateo - locking fixes for primary planes (Matt Roper) - code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but not yet enabled because some fixes from Paulo haven't made the cut - more gpu boost tuning from Chris - as usual piles of little things all over * tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits) drm/i915: Make the RPS interrupt generation mask handle the vlv wa drm/i915: Move RPS evaluation interval counters to i915->rps drm/i915: Don't cast a pointer to void* unnecessarily drm/i915: don't read LVDS regs at compute_config time drm/i915: check the power domains in intel_lvds_get_hw_state() drm/i915: check the power domains in ironlake_get_pipe_config() drm/i915: don't skip shared DPLL assertion on LPT drm/i915: Only touch WRPLL hw state in enable/disable hooks drm/i915: Switch to common shared dpll framework for WRPLLs drm/i915: ->enable hook for WRPLLs drm/i915: ->disable hook for WRPLLs drm/i915: State readout support for WRPLLs drm/i915: add POWER_DOMAIN_PLLS drm/i915: Document that the pll->mode_set hook is optional drm/i915: Basic shared dpll support for WRPLLs drm/i915: Precompute static ddi_pll_sel values in encoders drm/i915: BDW also has special-purpose DP DDI clocks drm/i915: State readout and cross-checking for ddi_pll_sel drm/i915: Move ddi_pll_sel into the pipe config drm/i915: Add a debugfs file for the shared dpll state ...
-
- 18 Jul, 2014 16 commits
-
-
Sean Paul authored
drm_select_eld should check for mode_config.connection_mutex as well as mode_config.mutex: We need that since this function checks conector->encoder links. Signed-off-by:
Sean Paul <seanpaul@chromium.org> [danvet: Pimp commit message slightly.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
We could be using uninitialized fields of the header in drm_dp_encode_sideband_msg_hdr(), for instance hdr->somt is set to 1 in the first patcket but never set to 0 otherwise. Always clear the header at the start then. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Damien Lespiau authored
A static analysis tool tells me that we could try to read an uninitialized 'ret' value. Plug that. Signed-off-by:
-
Matt Roper authored
drm_plane_init() (the legacy plane initialization function) takes a bool as its final parameter; originally this indicated whether a plane was 'private' to the driver (before the DRM core understood non-overlay planes), now it indicates whether the plane is a primary plane (private planes were used by some drivers to represent primary planes internally). The newer drm_universal_plane_init() take an 'enum drm_plane_type' as its final parameter to allow the caller to specify the specific plane type desired (primary, cursor, or overlay). Due to a rebasing mistake, the primary plane helper is currently passing DRM_PLANE_TYPE_PRIMARY (enum value = 1) for drm_plane_init()'s boolean 'is_primary' parameter. This winds up giving the correct behavior since DRM_PLANE_TYPE_PRIMARY evaluates as true, but is confusing to anyone reading the code since we're passing an enum value (one of three possible values) for a boolean parameter. Replace the primary plane helper's call to drm_plane_init() with drm_universal_plane_init() so that the parameter and value types match up as expected. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Fabian Frederick authored
This patch removes special case of last element and loops from idx to 0. Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Thierry Reding authored
The drm_property_create_enum(), drm_property_create_bitmask() and drm_property_create_range() contain the wrong name in the kerneldoc comment. This is probably simply a copy/paste mistake. Signed-off-by:
-
Rob Clark authored
Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
- 10 Jul, 2014 4 commits
-
-
Chris Wilson authored
We can eliminate a lot of special case code by making the computation of the interrupt mask be correct for all callers. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
Place the RPS counters inside the RPS struct. Signed-off-by:
-
Damien Lespiau authored
C is super happy to asign anything pointer to void *. Don't pretend otherwise. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Paulo Zanoni authored
We may reach this point while the machine is still runtime suspended, so we'll hit a WARN. The other encoders also don't touch registers at this point, so instead of waking the machine up, write some code to keep the register always at the same state, including after we runtime suspend/resume. Testcase: igt/pm_rpm Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by:
-
