- 15 Jun, 2023 13 commits
-
-
Christian Marangi authored
Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails. It's also needed to free everything allocated by stmmac_setup_dma_desc and not just the dma_conf struct. Drop free_dma_desc_resources from __stmmac_open and correctly call free_dma_desc_resources on each user of __stmmac_open on error. Reported-by:
Jose Abreu <Jose.Abreu@synopsys.com> Fixes: ba39b344 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open") Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Lin Ma authored
According to nla_parse_nested_deprecated(), the tb[] is supposed to the destination array with maxtype+1 elements. In current tipc_nl_media_get() and __tipc_nl_media_set(), a larger array is used which is unnecessary. This patch resize them to a proper size. Fixes: 1e55417d ("tipc: add media set to new netlink api") Fixes: 46f15c67 ("tipc: add media get/dump to new netlink api") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Reviewed-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20230614120604.1196377-1-linma@zju.edu.cnSigned-off-by:
-
Íñigo Huguet authored
In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not changed to a proper default value. This was leading to the driver thinking that it has dedicated XDP queues, when it didn't. Fix it by setting xdp_txq_queues_mode to the correct value if the driver fallbacks to MSI or legacy IRQ mode. The correct value is EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues. The issue can be easily visible if the kernel is started with pci=nomsi, then a call trace is shown. It is not shown only with sfc's modparam interrupt_mode=2. Call trace example: WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc] [...skip...] Call Trace: <TASK> efx_set_channels+0x5c/0xc0 [sfc] efx_probe_nic+0x9b/0x15a [sfc] efx_probe_all+0x10/0x1a2 [sfc] efx_pci_probe_main+0x12/0x156 [sfc] efx_pci_probe_post_io+0x18/0x103 [sfc] efx_pci_probe.cold+0x154/0x257 [sfc] local_pci_probe+0x42/0x80 Fixes: 6215b608 ("sfc: last resort fallback for lack of xdp tx queues") Reported-by:
Yanghang Liu <yanghliu@redhat.com> Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fedor Pchelkin authored
Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and macsec->stats on some of the memory allocation failure paths. However, the net_device is already registered to that moment: in macsec_newlink(), just before calling macsec_add_dev(). This means that during unregister process its priv_destructor - macsec_free_netdev() - will be called and will free the stats again. Remove freeing percpu stats inside macsec_add_dev() because macsec_free_netdev() will correctly free the already allocated ones. The pointers to unallocated stats stay NULL, and free_percpu() treats that correctly. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 0a28bfd4 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Eric Dumazet authored
It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
-
Jan Karcher authored
adding three people from Alibaba as reviewers for SMC. They are currently working on improving SMC on other architectures than s390 and help with reviewing patches on top. Thank you D. Wythe, Tony Lu and Wen Gu for your contributions and collaboration and welcome on board as reviewers! Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by:
Jan Karcher <jaka@linux.ibm.com> Acked-by:
Tony Lu <tonylu@linux.alibaba.com> Acked-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Julian Ruess authored
This patch prevents the system from crashing when unloading the ISM module. How to reproduce: Attach an ISM device and execute 'rmmod ism'. Error-Log: - Trying to free already-free IRQ 0 - WARNING: CPU: 1 PID: 966 at kernel/irq/manage.c:1890 free_irq+0x140/0x540 After calling ism_dev_exit() for each ISM device in the exit routine, pci_unregister_driver() will execute ism_remove() for each ISM device. Because ism_remove() also calls ism_dev_exit(), free_irq(pci_irq_vector(pdev, 0), ism) is called twice for each ISM device. This results in a crash with the error 'Trying to free already-free IRQ'. In the exit routine, it is enough to call pci_unregister_driver() because it ensures that ism_dev_exit() is called once per ISM device. Cc: <stable@vger.kernel.org> # 6.3+ Fixes: 89e7d2ba ("net/ism: Add new API for client registration") Reviewed-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Julian Ruess <julianr@linux.ibm.com> Signed-off-by:
-
Vladimir Oltean authored
The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535. Plus 2 * VLAN_HLEN (4), that is up to 65543. The picos_per_byte variable is the largest when "speed" is lowest - SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000. Their product - 52434400000 - exceeds 32 bits, which is a problem, because apparently, a multiplication between two 32-bit factors is evaluated as 32-bit before being assigned to a 64-bit variable. In fact it's a problem for any MTU value larger than 5368. Cast one of the factors of the multiplication to u64 to force the multiplication to take place on 64 bits. Issue found by Coverity. Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Vlad Buslov authored
Mingshuai Ren reports: When a new chain is added by using tc, one soft lockup alarm will be generated after delete the prio 0 filter of the chain. To reproduce the problem, perform the following steps: (1) tc qdisc add dev eth0 root handle 1: htb default 1 (2) tc chain add dev eth0 (3) tc filter del dev eth0 chain 0 parent 1: prio 0 (4) tc filter add dev eth0 chain 0 parent 1: Fix the issue by accounting for additional reference to chains that are explicitly created by RTM_NEWCHAIN message as opposed to implicitly by RTM_NEWTFILTER message. Fixes: 726d0612 ("net: sched: prevent insertion of new classifiers during chain flush") Reported-by:
Mingshuai Ren <renmingshuai@huawei.com> Closes: https://lore.kernel.org/lkml/87legswvi3.fsf@nvidia.com/T/Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20230612093426.2867183-1-vladbu@nvidia.comSigned-off-by:
-
Jakub Buchocki authored
Clearing the interrupt scheme before PFR reset, during the removal routine, could cause the hardware errors and possibly lead to system reboot, as the PF reset can cause the interrupt to be generated. Place the call for PFR reset inside ice_deinit_dev(), wait until reset and all pending transactions are done, then call ice_clear_interrupt_scheme(). This introduces a PFR reset to multiple error paths. Additionally, remove the call for the reset from ice_load() - it will be a part of ice_unload() now. Error example: [ 75.229328] ice 0000:ca:00.1: Failed to read Tx Scheduler Tree - User Selection data from flash [ 77.571315] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 77.571418] {1}[Hardware Error]: event severity: recoverable [ 77.571459] {1}[Hardware Error]: Error 0, type: recoverable [ 77.571500] {1}[Hardware Error]: section_type: PCIe error [ 77.571540] {1}[Hardware Error]: port_type: 4, root port [ 77.571580] {1}[Hardware Error]: version: 3.0 [ 77.571615] {1}[Hardware Error]: command: 0x0547, status: 0x4010 [ 77.571661] {1}[Hardware Error]: device_id: 0000:c9:02.0 [ 77.571703] {1}[Hardware Error]: slot: 25 [ 77.571736] {1}[Hardware Error]: secondary_bus: 0xca [ 77.571773] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a [ 77.571821] {1}[Hardware Error]: class_code: 060400 [ 77.571858] {1}[Hardware Error]: bridge: secondary_status: 0x2800, control: 0x0013 [ 77.572490] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020 [ 77.572870] pcieport 0000:c9:02.0: [21] ACSViol (First) [ 77.573222] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID [ 77.573554] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010 [ 77.691273] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 77.691738] {2}[Hardware Error]: event severity: recoverable [ 77.691971] {2}[Hardware Error]: Error 0, type: recoverable [ 77.692192] {2}[Hardware Error]: section_type: PCIe error [ 77.692403] {2}[Hardware Error]: port_type: 4, root port [ 77.692616] {2}[Hardware Error]: version: 3.0 [ 77.692825] {2}[Hardware Error]: command: 0x0547, status: 0x4010 [ 77.693032] {2}[Hardware Error]: device_id: 0000:c9:02.0 [ 77.693238] {2}[Hardware Error]: slot: 25 [ 77.693440] {2}[Hardware Error]: secondary_bus: 0xca [ 77.693641] {2}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a [ 77.693853] {2}[Hardware Error]: class_code: 060400 [ 77.694054] {2}[Hardware Error]: bridge: secondary_status: 0x0800, control: 0x0013 [ 77.719115] pci 0000:ca:00.1: AER: can't recover (no error_detected callback) [ 77.719140] pcieport 0000:c9:02.0: AER: device recovery failed [ 77.719216] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020 [ 77.719390] pcieport 0000:c9:02.0: [21] ACSViol (First) [ 77.719557] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID [ 77.719723] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010 Fixes: 5b246e53 ("ice: split probe into smaller functions") Signed-off-by:Jakub Buchocki <jakubx.buchocki@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-12 (igc, igb) This series contains updates to igc and igb drivers. Husaini clears Tx rings when interface is brought down for igc. Vinicius disables PTM and PCI busmaster when removing igc driver. Alex adds error check and path for NVM read error on igb. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igb: fix nvm.ops.read() error handling igc: Fix possible system crash when loading module igc: Clean the TX buffer and TX descriptor ring ==================== Link: https://lore.kernel.org/r/20230612205208.115292-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Lin Ma authored
A reference underflow is found in TLS handshake subsystem that causes a direct use-after-free. Part of the crash log is like below: [ 2.022114] ------------[ cut here ]------------ [ 2.022193] refcount_t: underflow; use-after-free. [ 2.022288] WARNING: CPU: 0 PID: 60 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 [ 2.022432] Modules linked in: [ 2.022848] RIP: 0010:refcount_warn_saturate+0xbe/0x110 [ 2.023231] RSP: 0018:ffffc900001bfe18 EFLAGS: 00000286 [ 2.023325] RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00000000ffffdfff [ 2.023438] RDX: 0000000000000000 RSI: 00000000ffffffea RDI: 0000000000000001 [ 2.023555] RBP: ffff888004c20098 R08: ffffffff82b392c8 R09: 00000000ffffdfff [ 2.023693] R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888004c200d8 [ 2.023813] R13: 0000000000000000 R14: ffff888004c20000 R15: ffffc90000013ca8 [ 2.023930] FS: 0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 2.024062] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.024161] CR2: ffff888003601000 CR3: 0000000002a2e000 CR4: 00000000000006f0 [ 2.024275] Call Trace: [ 2.024322] <TASK> [ 2.024367] ? __warn+0x7f/0x130 [ 2.024430] ? refcount_warn_saturate+0xbe/0x110 [ 2.024513] ? report_bug+0x199/0x1b0 [ 2.024585] ? handle_bug+0x3c/0x70 [ 2.024676] ? exc_invalid_op+0x18/0x70 [ 2.024750] ? asm_exc_invalid_op+0x1a/0x20 [ 2.024830] ? refcount_warn_saturate+0xbe/0x110 [ 2.024916] ? refcount_warn_saturate+0xbe/0x110 [ 2.024998] __tcp_close+0x2f4/0x3d0 [ 2.025065] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [ 2.025168] tcp_close+0x1f/0x70 [ 2.025231] inet_release+0x33/0x60 [ 2.025297] sock_release+0x1f/0x80 [ 2.025361] handshake_req_cancel_test2+0x100/0x2d0 [ 2.025457] kunit_try_run_case+0x4c/0xa0 [ 2.025532] kunit_generic_run_threadfn_adapter+0x15/0x20 [ 2.025644] kthread+0xe1/0x110 [ 2.025708] ? __pfx_kthread+0x10/0x10 [ 2.025780] ret_from_fork+0x2c/0x50 One can enable CONFIG_NET_HANDSHAKE_KUNIT_TEST config to reproduce above crash. The root cause of this bug is that the commit 1ce77c99 ("net/handshake: Unpin sock->file if a handshake is cancelled") adds one additional fput() function. That patch claims that the fput() is used to enable sock->file to be freed even when user space never calls DONE. However, it seems that the intended DONE routine will never give an additional fput() of ths sock->file. The existing two of them are just used to balance the reference added in sockfd_lookup(). This patch revert the mentioned commit to avoid the use-after-free. The patched kernel could successfully pass the KUNIT test and boot to shell. [ 0.733613] # Subtest: Handshake API tests [ 0.734029] 1..11 [ 0.734255] KTAP version 1 [ 0.734542] # Subtest: req_alloc API fuzzing [ 0.736104] ok 1 handshake_req_alloc NULL proto [ 0.736114] ok 2 handshake_req_alloc CLASS_NONE [ 0.736559] ok 3 handshake_req_alloc CLASS_MAX [ 0.737020] ok 4 handshake_req_alloc no callbacks [ 0.737488] ok 5 handshake_req_alloc no done callback [ 0.737988] ok 6 handshake_req_alloc excessive privsize [ 0.738529] ok 7 handshake_req_alloc all good [ 0.739036] # req_alloc API fuzzing: pass:7 fail:0 skip:0 total:7 [ 0.739444] ok 1 req_alloc API fuzzing [ 0.740065] ok 2 req_submit NULL req arg [ 0.740436] ok 3 req_submit NULL sock arg [ 0.740834] ok 4 req_submit NULL sock->file [ 0.741236] ok 5 req_lookup works [ 0.741621] ok 6 req_submit max pending [ 0.741974] ok 7 req_submit multiple [ 0.742382] ok 8 req_cancel before accept [ 0.742764] ok 9 req_cancel after accept [ 0.743151] ok 10 req_cancel after done [ 0.743510] ok 11 req_destroy works [ 0.743882] # Handshake API tests: pass:11 fail:0 skip:0 total:11 [ 0.744205] # Totals: pass:17 fail:0 skip:0 total:17 Acked-by:
Chuck Lever <chuck.lever@oracle.com> Fixes: 1ce77c99 ("net/handshake: Unpin sock->file if a handshake is cancelled") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== A couple of straggler fixes, mostly in the stack: - fix fragmentation for multi-link related elements - fix callback copy/paste error - fix multi-link locking - remove double-locking of wiphy mutex - transmit only on active links, not all - activate links in the correct order - don't remove links that weren't added - disable soft-IRQs for LQ lock in iwlwifi * tag 'wireless-2023-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression wifi: mac80211: fragment per STA profile correctly wifi: mac80211: Use active_links instead of valid_links in Tx wifi: cfg80211: remove links only on AP wifi: mac80211: take lock before setting vif links wifi: cfg80211: fix link del callback to call correct handler wifi: mac80211: fix link activation settings order wifi: cfg80211: fix double lock bug in reg_wdev_chan_valid() ==================== Link: https://lore.kernel.org/r/20230614075502.11765-1-johannes@sipsolutions.netSigned-off-by:
-
- 14 Jun, 2023 12 commits
-
-
Danielle Ratson authored
Setting the IPv6 address generation mode of a net device during its creation never worked, but after commit b0ad3c17 ("rtnetlink: call validate_linkmsg in rtnl_create_link") it explicitly fails [1]. The failure is caused by the fact that validate_linkmsg() is called before the net device is registered, when it still does not have an 'inet6_dev'. Likewise, raising the net device before setting the address generation mode is meaningless, because by the time the mode is set, the address has already been generated. Therefore, fix the test to first create the net device, then set its IPv6 address generation mode and finally bring it up. [1] # ip link add name mydev addrgenmode eui64 type dummy RTNETLINK answers: Address family not supported by protocol Fixes: ba95e793 ("selftests: forwarding: hw_stats_l3: Add a new test") Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/f3b05d85b2bc0c3d6168fe8f7207c6c8365703db.1686580046.git.petrm@nvidia.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Peilin Ye says: ==================== net/sched: Fix race conditions in mini_qdisc_pair_swap() These 2 patches fix race conditions for ingress and clsact Qdiscs as reported [1] by syzbot, split out from another [2] series (last 2 patches of it). Per-patch changelog omitted. Patch 1 hasn't been touched since last version; I just included everybody's tag. Patch 2 bases on patch 6 v1 of [2], with comments and commit log slightly changed. We also need rtnl_dereference() to load ->qdisc_sleeping since commit d636fc5d ("net: sched: add rcu annotations around qdisc->qdisc_sleeping"), so I changed that; please take yet another look, thanks! Patch 2 has been tested with the new reproducer Pedro posted [3]. [1] https://syzkaller.appspot.com/bug?extid=b53a9c0d1ea4ad62da8b [2] https://lore.kernel.org/r/cover.1684887977.git.peilin.ye@bytedance.com/ [3] https://lore.kernel.org/r/7879f218-c712-e9cc-57ba-665990f5f4c9@mojatatu.com/ ==================== Link: https://lore.kernel.org/r/cover.1686355297.git.peilin.ye@bytedance.comSigned-off-by:
-
Peilin Ye authored
mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs access this per-net_device pointer in mini_qdisc_pair_swap(). Similar for clsact Qdiscs and miniq_egress. Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER requests (thanks Hillf Danton for the hint), when replacing ingress or clsact Qdiscs, for example, the old Qdisc ("@old") could access the same miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"), causing race conditions [1] including a use-after-free bug in mini_qdisc_pair_swap() reported by syzbot: BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573 Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319 print_report mm/kasan/report.c:430 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:536 mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573 tcf_chain_head_change_item net/sched/cls_api.c:495 [inline] tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509 tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline] tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline] tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266 ... @old and @new should not affect each other. In other words, @old should never modify miniq_{in,e}gress after @new, and @new should not update @old's RCU state. Fixing without changing sch_api.c turned out to be difficult (please refer to Closes: for discussions). Instead, make sure @new's first call always happen after @old's last call (in {ingress,clsact}_destroy()) has finished: In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests, and call qdisc_destroy() for @old before grafting @new. Introduce qdisc_refcount_dec_if_one() as the counterpart of qdisc_refcount_inc_nz() used for filter requests. Introduce a non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check, just like qdisc_put() etc. Depends on patch "net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs". [1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under TC_H_ROOT (no longer possible after commit c7cfbd11 ("net/sched: sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8 transmission queues: Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2), then adds a flower filter X to A. Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and b2) to replace A, then adds a flower filter Y to B. Thread 1 A's refcnt Thread 2 RTM_NEWQDISC (A, RTNL-locked) qdisc_create(A) 1 qdisc_graft(A) 9 RTM_NEWTFILTER (X, RTNL-unlocked) __tcf_qdisc_find(A) 10 tcf_chain0_head_change(A) mini_qdisc_pair_swap(A) (1st) | | RTM_NEWQDISC (B, RTNL-locked) RCU sync 2 qdisc_graft(B) | 1 notify_and_destroy(A) | tcf_block_release(A) 0 RTM_NEWTFILTER (Y, RTNL-unlocked) qdisc_destroy(A) tcf_chain0_head_change(B) tcf_chain0_head_change_cb_del(A) mini_qdisc_pair_swap(B) (2nd) mini_qdisc_pair_swap(A) (3rd) | ... ... Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress packets on eth0 will not find filter Y in sch_handle_ingress(). This is just one of the possible consequences of concurrently accessing miniq_{in,e}gress pointers. Fixes: 7a096d57 ("net: sched: ingress: set 'unlocked' flag for Qdisc ops") Fixes: 87f37392 ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops") Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/ Cc: Hillf Danton <hdanton@sina.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by:Peilin Ye <peilin.ye@bytedance.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Peilin Ye authored
Grafting ingress and clsact Qdiscs does not need a for-loop in qdisc_graft(). Refactor it. No functional changes intended. Tested-by:
Pedro Tammela <pctammela@mojatatu.com> Acked-by:
-
Paul Blakey authored
Currently UNREPLIED and UNASSURED connections are added to the nf flow table. This causes the following connection packets to be processed by the flow table which then skips conntrack_in(), and thus such the connections will remain UNREPLIED and UNASSURED even if reply traffic is then seen. Even still, the unoffloaded reply packets are the ones triggering hardware update from new to established state, and if there aren't any to triger an update and/or previous update was missed, hardware can get out of sync with sw and still mark packets as new. Fix the above by: 1) Not skipping conntrack_in() for UNASSURED packets, but still refresh for hardware, as before the cited patch. 2) Try and force a refresh by reply-direction packets that update the hardware rules from new to established state. 3) Remove any bidirectional flows that didn't failed to update in hardware for re-insertion as bidrectional once any new packet arrives. Fixes: 6a9bad00 ("net/sched: act_ct: offload UDP NEW connections") Co-developed-by:
Paul Blakey <paulb@nvidia.com> Reviewed-by:
-
Hugh Dickins authored
Lockdep on 6.4-rc on ThinkPad X1 Carbon 5th says ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.4.0-rc5 #1 Not tainted ----------------------------------------------------- kworker/3:1/49 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff8881066fa368 (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}, at: rs_drv_get_rate+0x46/0xe7 and this task is already holding: ffff8881066f80a8 (&sta->rate_ctrl_lock){+.-.}-{2:2}, at: rate_control_get_rate+0xbd/0x126 which would create a new lock dependency: (&sta->rate_ctrl_lock){+.-.}-{2:2} -> (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2} but this new dependency connects a SOFTIRQ-irq-safe lock: (&sta->rate_ctrl_lock){+.-.}-{2:2} etc. etc. etc. Changing the spin_lock() in rs_drv_get_rate() to spin_lock_bh() was not enough to pacify lockdep, but changing them all on pers.lock has worked. Fixes: a8938bc8 ("wifi: iwlwifi: mvm: Add locking to the rate read flow") Signed-off-by:Hugh Dickins <hughd@google.com> Link: https://lore.kernel.org/r/79ffcc22-9775-cb6d-3ffd-1a517c40beef@google.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Jakub Kicinski authored
Vlad Buslov says: ==================== Fix small bugs and annoyances in tc-testing ==================== Link: https://lore.kernel.org/r/20230612075712.2861848-1-vladbu@nvidia.comSigned-off-by:
-
Vlad Buslov authored
Some qdiscs and classifiers have recently been retired from kernel. However, tc-testing config is still cluttered with them which causes noise when using merge_config.sh script to update existing config for tc-testing compatibility. Remove the config settings for affected qdiscs and classifiers. Fixes: fb38306c ("net/sched: Retire ATM qdisc") Fixes: 051d4420 ("net/sched: Retire CBQ qdisc") Fixes: bbe77c14 ("net/sched: Retire dsmark qdisc") Fixes: 265b4da8 ("net/sched: Retire rsvp classifier") Fixes: 8c710f75 ("net/sched: Retire tcindex classifier") Signed-off-by:
-
Vlad Buslov authored
Setting very small value of db like 10ms introduces rounding errors when converting to/from jiffies on some kernel configs. For example, on 250hz the actual value will be set to 12ms which causes the test to fail: # $ sudo ./tdc.py -d eth2 -e 3410 # -- ns/SubPlugin.__init__ # Test 3410: Create SFB with db setting # # All test results: # # 1..1 # not ok 1 3410 - Create SFB with db setting # Could not match regex pattern. Verify command output: # qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p Set the value to 100ms instead which currently seem to work on 100hz, 250hz, 300hz and 1000hz kernel configs. Fixes: 6ad92dc5 ("selftests/tc-testing: add selftests for sfb qdisc") Signed-off-by:
-
Vlad Buslov authored
Add missing netfilter config dependency. Fixes following example error when running tests via tdc.sh for all XT tests: # $ sudo ./tdc.py -d eth2 -e 2029 # Test 2029: Add xt action with log-prefix # exit: 255 # exit: 0 # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # -----> teardown stage *** Could not execute: "$TC actions flush action xt" # # -----> teardown stage *** Error message: "Error: Cannot flush unknown TC action. # We have an error flushing # " # returncode 1; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', ' failed to find target LOG\n\nbad action parsing\nparse_action: bad value (7:xt)!\nIllegal "action"\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 2029 Add xt action with log-prefix stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # --------------- # # All test results: # # 1..1 # ok 1 2029 - Add xt action with log-prefix # skipped - "-----> teardown stage" did not complete successfully Fixes: 910d504b ("selftests/tc-testings: add selftests for xt action") Signed-off-by: -
Vlad Buslov authored
All TEQL tests assume that sch_teql module is loaded. Load module in tdc.sh before running qdisc tests. Fixes following example error when running tests via tdc.sh for all TEQL tests: # $ sudo ./tdc.py -d eth2 -e 84a0 # -- ns/SubPlugin.__init__ # Test 84a0: Create TEQL with default setting # exit: 2 # exit: 0 # Error: Specified qdisc kind is unknown. # # -----> teardown stage *** Could not execute: "$TC qdisc del dev $DUMMY handle 1: root" # # -----> teardown stage *** Error message: "Error: Invalid handle. # " # returncode 2; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', 'Error: Specified qdisc kind is unknown.\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 84a0 Create TEQL with default setting stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # Error: Specified qdisc kind is unknown. # # --------------- # # All test results: # # 1..1 # ok 1 84a0 - Create TEQL with default setting # skipped - "-----> teardown stage" did not complete successfully Fixes: cc62fbe1 ("selftests/tc-testing: add selftests for teql qdisc") Signed-off-by:Victor Nogueira <victor@mojatatu.com> Reviewed-by:
-
Dan Carpenter authored
This code returns directly but it should instead call of_node_put() to drop some reference counts. Fixes: dab2b265 ("net: ethernet: ti: am65-cpsw: Add support for SERDES configuration") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/e3012f0c-1621-40e6-bf7d-03c276f6e07f@kili.mountainSigned-off-by:
-
- 12 Jun, 2023 15 commits
-
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== selftests: mptcp: skip tests not supported by old kernels (part 3) After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues. Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace. In addition to that, the current MPTCP selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels. To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftest or just some sub-tests before starting them. This cannot be applied in all cases. Similar to the second part, this third one focuses on marking different sub-tests as skipped if some MPTCP features are not supported. This time, only in "mptcp_join.sh" selftest, the remaining one, is modified. Several techniques are used here to achieve this task: - Before starting some tests: - Check if a file (sysctl knob) is present: that's what patch 12/17 is doing for the userspace PM feature. - Check if a required kernel symbol is present in /proc/kallsyms: patches 9, 10, 14 and 15/17 are using this technique. - Check if it is possible to setup a particular network environment requiring Netfilter or TC: if the preparation step fail, the linked sub-test is marked as skipped. Patch 5/17 is doing that. - Check if a MIB counter is available: patches 7 and 13/17 do that. - Check if the kernel version is newer than a specific one: patch 1/17 adds some helpers in mptcp_lib.sh to ease its use. That's not ideal and it is only used as last resort but as mentioned above, it is important to skip tests if they are not supported not to have the whole selftest always being marked as failed on old kernels. Patches 11 and 17/17 are checking the kernel version. An alternative would be to ignore the results for some sub-tests but that's not ideal too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be set to 1 not to skip these tests if the running kernel doesn't have a supported version. - After having launched the tests: - Adapt the expectations depending on the presence of a kernel symbol (patch 6/17) or a kernel version (patch 8/17). - Check is a MIB counter is available and skip the verification if not. Patch 4/17 is using this technique. Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var value is checked: if it is set to 1, the test is marked as "failed" instead of "skipped". MPTCP public CI expects to have all features supported and it sets this env var to 1 to catch regressions in these new checks. Patch 2/17 uses 'iptables-legacy' if available because it might be needed when using an older kernel not supporting iptables-nft. Patch 3/17 adds some helpers used in the other patches mentioned to easily mark sub-tests as skipped. Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code from userspace_pm.sh but without using the "code style" and ways of using tools and printing messages from MPTCP Join selftest. Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 ==================== Link: https://lore.kernel.org/r/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.netSigned-off-by: -
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of a mix of subflows in v4 and v6 by the in-kernel PM introduced by commit b9d69db8 ("mptcp: let the in-kernel PM use mixed IPv4 and IPv6 addresses"). It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ad349374 ("selftests: mptcp: add test-cases for mixed v4/v6 subflows") Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
The alignment was different from the other tests because tabs were used instead of spaces. While at it, also use 'echo' instead of 'printf' to print the result to keep the same style as done in the other sub-tests. And, even if it should be better with, also remove 'stdbuf' and sed's '--unbuffered' option because they are not used in the other subtests and they are not available when using a minimal environment with busybox. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d0232 ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of PM listener events introduced by commit f8c9dfbd ("mptcp: add pm listener events"). It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d0232 ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of sending an MP_PRIO signal for the initial subflow, introduced by commit c157bbe7 ("mptcp: allow the in kernel PM to set MPC subflow priority"). It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 914f6a59 ("selftests: mptcp: add MPC backup tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the MP_FAIL / infinite mapping introduced by commit 1e39e5a3 ("mptcp: infinite mapping sending") and the following ones. It is possible to look for one of the infinite mapping counters to know in advance if the this feature is available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b6e074e1 ("selftests: mptcp: add infinite map testcase") Cc: stable@vger.kernel.org Fixes: 2ba18161 ("selftests: mptcp: add MP_FAIL reset testcase") Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the userspace PM introduced by commit 4638de5a ("mptcp: handle local addrs announced by userspace PMs") and the following ones. It is possible to look for the MPTCP pm_type's sysctl knob to know in advance if the userspace PM is available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5ac1d2d6 ("selftests: mptcp: Add tests for userspace PM type") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the fullmesh flag for the in-kernel PM introduced by commit 2843ff6f ("mptcp: remote addresses fullmesh") and commit 1a0d6136 ("mptcp: local addresses fullmesh"). It looks like there is no easy external sign we can use to predict the expected behaviour. We could add the flag and then check if it has been added but for that, and for each fullmesh test, we would need to setup a new environment, do the checks, clean it and then only start the test from yet another clean environment. To keep it simple and avoid introducing new issues, we look for a specific kernel version. That's not ideal but an acceptable solution for this case. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6a0653b9 ("selftests: mptcp: add fullmesh setting tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Commit bccefb76 ("selftests: mptcp: simplify pm_nl_change_endpoint") has simplified the way the backup flag is set on an endpoint. Instead of doing: ./pm_nl_ctl set 10.0.2.1 flags backup Now we do: ./pm_nl_ctl set id 1 flags backup The new way is easier to maintain but it is also incompatible with older kernels not supporting the implicit endpoints putting in place the infrastructure to set flags per ID, hence the second Fixes tag. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: bccefb76 ("selftests: mptcp: simplify pm_nl_change_endpoint") Cc: stable@vger.kernel.org Fixes: 4cf86ae8 ("mptcp: strict local address ID selection") Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the implicit endpoints introduced by commit d045b9eb ("mptcp: introduce implicit endpoints"). It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results. Note that here and in the following commits, we re-do the same check for each sub-test of the same function for a few reasons. The main one is not to break the ID assign to each test in order to be able to easily compare results between different kernel versions. Also, we can still run a specific test even if it is skipped. Another reason is that it makes it clear during the review that a specific subtest will be skipped or not under certain conditions. At the end, it looks OK to call the exact same helper multiple times: it is not a critical path and it is the same code that is executed, not really more cases to maintain. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 69c6ce7b ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a UAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features. It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6fa0174a ("mptcp: more careful RM_ADDR generation") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of MP_FASTCLOSE introduced in commit f284c0c7 ("mptcp: implement fastclose xmit path"). If the MIB counter is not available, the test cannot be verified and the behaviour will not be the expected one. So we can skip the test if the counter is missing. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 01542c9b ("selftests: mptcp: add fastclose testcase") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a uAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features. It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance what the behaviour we are expecting here instead of supporting the two behaviours. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 86e39e04 ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Some tests are using IPTables and/or TC commands to force some behaviours. If one of these commands fails -- likely because some features are not available due to missing kernel config -- we should intercept the error and skip the tests requiring these features. Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped. This patch also replaces the 'exit 1' by 'return 1' not to stop the selftest in the middle without the conclusion if there is an issue with NF or TC. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP MIB counters introduced in commit fc518953 ("mptcp: add and use MIB counter infrastructure") and more later. The MPTCP Join selftest heavily relies on these counters. If a counter is not supported by the kernel, it is not displayed when using 'nstat -z'. We can then detect that and skip the verification. A new helper (get_counter()) has been added to do the required checks and return an error if the counter is not available. Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped. This new helper also makes sure we get the exact counter we want to avoid issues we had in the past, e.g. with MPTcpExtRmAddr and MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the way we fetch a MIB counter. Note for the backports: we rarely change these modified blocks so if there is are conflicts, it is very likely because a counter is not used in the older kernels and we don't need that chunk. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf24 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Signed-off-by:
-
