- 21 Jan, 2014 4 commits
-
-
Bart Van Assche authored
Add a diagram in Documentation/scsi/scsi_transport_srp that illustrates the rport state transitions. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
-
Bart Van Assche authored
The rport timers must be stopped before the SRP initiator destroys the resources associated with the SCSI host. This is necessary because otherwise the callback functions invoked from the SRP transport layer could trigger a use-after-free. Stopping the rport timers before invoking scsi_remove_host() can trigger long delays in the SCSI error handler if a transport layer failure occurs while scsi_remove_host() is in progress. Hence move the code for stopping the rport timers from srp_rport_release() into a new function and invoke that function after scsi_remove_host() has finished. This patch fixes the following sporadic kernel crash: kernel BUG at include/asm-generic/dma-mapping-common.h:64! invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffffa03b20b1>] [<ffffffffa03b20b1>] srp_unmap_data+0x121/0x130 [ib_srp] Call Trace: [<ffffffffa03b20fc>] srp_free_req+0x3c/0x80 [ib_srp] [<ffffffffa03b2188>] srp_finish_req+0x48/0x70 [ib_srp] [<ffffffffa03b21fb>] srp_terminate_io+0x4b/0x60 [ib_srp] [<ffffffffa03a6fb5>] __rport_fail_io_fast+0x75/0x80 [scsi_transport_srp] [<ffffffffa03a7438>] rport_fast_io_fail_timedout+0x88/0xc0 [scsi_transport_srp] [<ffffffff8108b370>] worker_thread+0x170/0x2a0 [<ffffffff81090876>] kthread+0x96/0xa0 [<ffffffff8100c0ca>] child_rip+0xa/0x20 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
-
Bart Van Assche authored
The current behavior of the SRP transport layer when a transport layer error is encountered is to block SCSI command processing only if fast_io_fail_tmo != off. The current behavior of the FC transport layer when a transport layer error is encountered is to block SCSI command processing no matter which value fast_io_fail_tmo has been set to. Make the behavior of the SRP transport layer consistent with that of the FC transport layer to avoid confusion. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
-
David Dillow authored
Today was my last day at ORNL, and my future endeavors will leave even less time to maintain the SRP initiator. My thanks especially go to Bart, for keeping the pressure to improve alive, and for driving so many of those improvements. [ Add Bart as new submaintainer. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
-
- 12 Jan, 2014 4 commits
-
-
Linus Torvalds authored
-
Steven Rostedt authored
While running stress tests on adding and deleting ftrace instances I hit this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_inode_permission+0x85/0x160 PGD 63681067 PUD 7ddbe067 PMD 0 Oops: 0000 [#1] PREEMPT CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000 RIP: 0010:[<ffffffff812d8bc5>] [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160 RSP: 0018:ffff88007ddb1c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840 RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000 RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54 R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000 R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000 FS: 00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0 Call Trace: security_inode_permission+0x1c/0x30 __inode_permission+0x41/0xa0 inode_permission+0x18/0x50 link_path_walk+0x66/0x920 path_openat+0xa6/0x6c0 do_filp_open+0x43/0xa0 do_sys_open+0x146/0x240 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff RIP selinux_inode_permission+0x85/0x160 CR2: 0000000000000020 Investigating, I found that the inode->i_security was NULL, and the dereference of it caused the oops. in selinux_inode_permission(): isec = inode->i_security; rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd); Note, the crash came from stressing the deletion and reading of debugfs files. I was not able to recreate this via normal files. But I'm not sure they are safe. It may just be that the race window is much harder to hit. What seems to have happened (and what I have traced), is the file is being opened at the same time the file or directory is being deleted. As the dentry and inode locks are not held during the path walk, nor is the inodes ref counts being incremented, there is nothing saving these structures from being discarded except for an rcu_read_lock(). The rcu_read_lock() protects against freeing of the inode, but it does not protect freeing of the inode_security_struct. Now if the freeing of the i_security happens with a call_rcu(), and the i_security field of the inode is not changed (it gets freed as the inode gets freed) then there will be no issue here. (Linus Torvalds suggested not setting the field to NULL such that we do not need to check if it is NULL in the permission check). Note, this is a hack, but it fixes the problem at hand. A real fix is to restructure the destroy_inode() to call all the destructor handlers from the RCU callback. But that is a major job to do, and requires a lot of work. For now, we just band-aid this bug with this fix (it works), and work on a more maintainable solution in the future. Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home Cc: stable@vger.kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
We see General Protection Fault on RSI in copy_page_rep: that RSI is what you get from a NULL struct page pointer. RIP: 0010:[<ffffffff81154955>] [<ffffffff81154955>] copy_page_rep+0x5/0x10 RSP: 0000:ffff880136e15c00 EFLAGS: 00010286 RAX: ffff880000000000 RBX: ffff880136e14000 RCX: 0000000000000200 RDX: 6db6db6db6db6db7 RSI: db73880000000000 RDI: ffff880dd0c00000 RBP: ffff880136e15c18 R08: 0000000000000200 R09: 000000000005987c R10: 000000000005987c R11: 0000000000000200 R12: 0000000000000001 R13: ffffea00305aa000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f195752f700(0000) GS:ffff880c7fc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000093010000 CR3: 00000001458e1000 CR4: 00000000000027e0 Call Trace: copy_user_huge_page+0x93/0xab do_huge_pmd_wp_page+0x710/0x815 handle_mm_fault+0x15d8/0x1d70 __do_page_fault+0x14d/0x840 do_page_fault+0x2f/0x90 page_fault+0x22/0x30 do_huge_pmd_wp_page() tests is_huge_zero_pmd(orig_pmd) four times: but since shrink_huge_zero_page() can free the huge_zero_page, and we have no hold of our own on it here (except where the fourth test holds page_table_lock and has checked pmd_same), it's possible for it to answer yes the first time, but no to the second or third test. Change all those last three to tests for NULL page. (Note: this is not the same issue as trinity's DEBUG_PAGEALLOC BUG in copy_page_rep with RSI: ffff88009c422000, reported by Sasha Levin in https://lkml.org/lkml/2013/3/29/103. I believe that one is due to the source page being split, and a tail page freed, while copy is in progress; and not a problem without DEBUG_PAGEALLOC, since the pmd_same check will prevent a miscopy from being made visible.) Fixes: 97ae1749 ("thp: implement refcounting for huge zero page") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v3.10 v3.11 v3.12 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ming Lei authored
When queue_mode is NULL_Q_MQ and null_blk is being removed, blk_cleanup_queue() isn't called to cleanup queue, so the queue allocated won't be freed. This patch calls blk_cleanup_queue() for MQ to drain all pending requests first and release the reference counter of queue kobject, then blk_mq_free_queue() will be called in queue kobject's release handler when queue kobject's reference counter drops to zero. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 10 Jan, 2014 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Famouse last words: "final pull request" :-) I'm sending this because Jason Wang's fixes are pretty important 1) Add missing per-cpu stats initialization to ip6_vti. Otherwise lockdep spits out a call trace. From Li RongQing. 2) Fix NULL oops in wireless hwsim, from Javier Lopez 3) TIPC deferred packet queue unlink must NULL out skb->next to avoid crashes. From Erik Hugne 4) Fix access to uninitialized buffer in nf_nat netfilter code, from Daniel Borkmann 5) Fix lifetime of ipv6 loopback and SIT tunnel addresses, otherwise they basically timeout immediately. From Hannes Frederic Sowa 6) Fix DMA unmapping of TSO packets in bnx2x driver, from Michal Schmidt 7) Do not allow L2 forwarding offload via macvtap device, the way things are now it will not end up being forwaded at all. From Jason Wang 8) Fix transmit queue selection via ndo_dfwd_start_xmit(), fixing things like applying NETIF_F_LLTX to the wrong device (!!) and eliding the proper transmit watchdog handling 9) qlcnic driver was not updating tx statistics at all, from Manish Chopra" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: qlcnic: Fix ethtool statistics length calculation qlcnic: Fix bug in TX statistics net: core: explicitly select a txq before doing l2 forwarding macvlan: forbid L2 fowarding offload for macvtap bnx2x: fix DMA unmapping of TSO split BDs ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME bnx2x: prevent WARN during driver unload tipc: correctly unlink packets from deferred packet queue ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c netfilter: only warn once on wrong seqadj usage netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper NFC: Fix target mode p2p link establishment iwlwifi: add new devices for 7265 series mac80211: move "bufferable MMPDU" check to fix AP mode scan mac80211_hwsim: Fix NULL pointer dereference
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull xfs bugfixes from Ben Myers: "Here we have a bugfix for an off-by-one in the remote attribute verifier that results in a forced shutdown which you can hit with v5 superblock by creating a 64k xattr, and a fix for a missing destroy_work_on_stack() in the allocation worker. It's a bit late, but they are both fairly straightforward" * tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs: xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK() xfs: fix off-by-one error in xfs_attr3_rmt_verify
-
Linus Torvalds authored
Merge branch 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu: "Pali Rohár and Pavel Machek reported the LED of Nokia N900 doesn't work with our latest 3.13-rc6 kernel. Milo fixed the regression here" * 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp5521/5523: Remove duplicate mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: - Recent commits modifying the lists of C-states in the intel_idle driver introduced bugs leading to crashes on some systems. Two fixes from Jiang Liu. - The ACPI AC driver should receive all types of notifications, but recent change made it ignore some of them. Fix from Alexander Mezin. - intel_pstate's validity checks for MSRs it depends on are not sufficient to catch the lack of support in nested KVM setups, so they are extended to cover that case. From Dirk Brandewie. - NEC LZ750/LS has a botched up _BIX method in its ACPI tables, so our ACPI battery driver needs a quirk for it. From Lan Tianyu. - The tpm_ppi driver sometimes leaks memory allocated by acpi_get_name(). Fix from Jiang Liu. * tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: close avn_cstates array with correct marker Revert "intel_idle: mark states tables with __initdata tag" ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters. ACPI / TPM: fix memory leak when walking ACPI namespace ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixesLinus Torvalds authored
Pull MFD fix from Samuel Ortiz: "This is the 2nd MFD pull request for 3.13 It only contains one fix for the rtsx_pcr driver. Without it we see a kernel panic on some machines, when resuming from suspend to RAM" * tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: rtsx_pcr: Disable interrupts before cancelling delayed works
-
Milo Kim authored
It can be a problem when a pattern is loaded via the firmware interface. LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'. So it should be deleted. On the other hand, locks are required in store_engine_load() on updating program memory. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> Cc: <stable@vger.kernel.org>
-
Chuansheng Liu authored
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to call destroy_work_on_stack() which frees the debug object to pair with INIT_WORK_ONSTACK(). Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 6f96b306)
-
Jie Liu authored
With CRC check is enabled, if trying to set an attributes value just equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote attr write verification procedure failure, which would yield the back trace like below: <snip> XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c <snip> Call Trace: [<ffffffff816f0042>] dump_stack+0x45/0x56 [<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs] [<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460 [<ffffffff81097230>] ? wake_up_state+0x20/0x20 [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs] [<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs] [<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs] [<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs] [<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs] [<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs] [<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs] [<ffffffff811df9b2>] generic_setxattr+0x62/0x80 [<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0 [<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10 [<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0 [<ffffffff811e054e>] setxattr+0x12e/0x1c0 [<ffffffff811c6e82>] ? final_putname+0x22/0x50 [<ffffffff811c708b>] ? putname+0x2b/0x40 [<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90 [<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0 [<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0 [<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0 [<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f Tests: setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile This patch fix it to check the remote EA size is greater than the XATTR_SIZE_MAX rather than more than or equal to it, because it's valid if the specified EA value size is equal to the limitation as per VFS setxattr interface. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 85dd0707)
-
Shahed Shaikh authored
o Consider number of Tx queues while calculating the length of Tx statistics as part of ethtool stats. o Calculate statistics lenght properly for 82xx and 83xx adapter Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
o Driver was not updating TX stats so it was not populating statistics in `ifconfig` command output. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
L2 fowarding offload will bypass the rx handler of real device. This will make the packet could not be forwarded to macvtap device. Another problem is the dev_hard_start_xmit() called for macvtap does not have any synchronization. Fix this by forbidding L2 forwarding for macvtap. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== For the mac80211 bits, Johannes says: "I have a fix from Javier for mac80211_hwsim when used with wmediumd userspace, and a fix from Felix for buffering in AP mode." For the NFC bits, Samuel says: "This pull request only contains one fix for a regression introduced with commit e29a9e2a. Without this fix, we can not establish a p2p link in target mode. Only initiator mode works." For the iwlwifi bits, Emmanuel says: "It only includes new device IDs so it's not vital. If you have a pull request to net.git anyway, I'd happy to have this in." ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920() bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x00000000da2b389e] [map size=1490 bytes] [unmap size=66 bytes] The reason is that bnx2x splits a TSO BD into two BDs (headers + data) using one DMA mapping for both, but it uses only the length of the first BD when unmapping. This patch fixes the bug by unmapping the whole length of the two BDs. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull clock fixes from Mike Turquette: "Late fixes for clock drivers. All of these fixes are for user-visible regressions, typically boot failures or other unsafe system configuration that causes badness" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: clk-divider: fix divisor > 255 bug clk: exynos: File scope reg_save array should depend on PM_SLEEP clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock ARM: dts: exynos5250: Fix MDMA0 clock number clk: samsung: exynos5250: Add MDMA0 clocks clk: samsung: exynos5250: Fix ACP gate register offset clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks clk: samsung: exynos4: Correct SRC_MFC register
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes for Renesas platforms to fixup DMA masks (this started causing errors once the DMA API added checks for valid masks in 3.13)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: mackerel: Fix coherent DMA mask ARM: shmobile: kzm9g: Fix coherent DMA mask ARM: shmobile: armadillo: Fix coherent DMA mask
-
Hannes Frederic Sowa authored
In the past the IFA_PERMANENT flag indicated, that the valid and preferred lifetime where ignored. Since change fad8da3e ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity") we honour at least the preferred lifetime on those addresses. As such the valid lifetime gets recalculated and updated to 0. If loopback address is added manually this problem does not occur. Also if NetworkManager manages IPv6, those addresses will get added via inet6_rtm_newaddr and thus will have a correct lifetime, too. Reported-by: François-Xavier Le Bail <fx.lebail@yahoo.com> Reported-by: Damien Wyart <damien.wyart@gmail.com> Fixes: fad8da3e ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity") Cc: Yasushi Asano <yasushi.asano@jp.fujitsu.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Starting with commit 80c33ddd "net: add might_sleep() call to napi_disable" bnx2x fails the might_sleep tests causing a stack trace to appear whenever the driver is unloaded, as local_bh_disable() is being called before napi_disable(). This changes the locking schematics related to CONFIG_NET_RX_BUSY_POLL, preventing the need for calling local_bh_disable() and thus eliminating the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafael J. Wysocki authored
* pm-cpuidle: intel_idle: close avn_cstates array with correct marker Revert "intel_idle: mark states tables with __initdata tag"
-
Jiang Liu authored
Close avn_cstates array with correct marker to avoid overflow in function intel_idle_cpu_init(). [rjw: The problem was introduced when commit 22e580d0 was merged on top of eba682a5 (intel_idle: shrink states tables).] Fixes: 22e580d0 (intel_idle: Fixed C6 state on Avoton/Rangeley processors) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 09 Jan, 2014 4 commits
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Jiang Liu authored
This reverts commit 9d046ccb. Commit 9d046ccb marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fix from Helge Deller: "This patch fixes the kmap/kunmap implementation on parisc and finally makes AIO work on parisc" * 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Ensure full cache coherency for kmap/kunmap
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "Late fixes for libata. Nothing too interesting. Adding missing PM callbacks to satat_sis and an additional PCI ID for ahci" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_sis: missing PM support ahci: add PCI ID for Marvell 88SE9170 SATA controller
-
- 08 Jan, 2014 7 commits
-
-
John David Anglin authored
Helge Deller noted a few weeks ago problems with the AIO support on parisc. This change is the result of numerous iterations on how best to deal with this problem. The solution adopted here is to provide full cache coherency in a uniform manner on all parisc systems. This involves calling flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on kunmap operations. As a result, the copy_user_page() and clear_user_page() functions can be removed and the overall code is simpler. The change ensures that both userspace and kernel aliases to a mapped page are invalidated and flushed. This is necessary for the correct operation of PA8800 and PA8900 based systems which do not support inequivalent aliases. With this change, I have observed no cache related issues on c8000 and rp3440. It is now possible for example to do kernel builds with "-j64" on four way systems. On systems using XFS file systems, the patch recently posted by Mikulas Patocka to "fix crash using XFS on loopback" is needed to avoid a hang caused by an uninitialized lock passed to flush_dcache_page() in the page struct. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixesJohn W. Linville authored
Samuel Ortiz <sameo@linux.intel.com> says: "This is the first NFC fixes pull request for 3.13. It only contains one fix for a regression introduced with commit e29a9e2a. Without this fix, we can not establish a p2p link in target mode. Only initiator mode works." Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
James Hogan authored
Commit 6d9252bd (clk: Add support for power of two type dividers) merged in v3.6 added the _get_val function to convert a divisor value to a register field value depending on the flags. However it used the type u8 for the div field, causing divisors larger than 255 to be masked and the resultant clock rate to be too high. E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This was masked to 238 (0xee) resulting in a frequency of 103.26KHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
git://anongit.freedesktop.org/nouveau/linux-2.6Dave Airlie authored
misc fixes for nouveau, one more msi rearm, regression fix for old bioses crash and leak fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/nouveau/linux-2.6: drm/nouveau/nouveau: fix memory leak in nouveau_crtc_page_flip() drm/nouveau/bios: fix offset calculation for BMPv1 bioses drm/nouveau: return offset of allocated notifier drm/nouveau/bios: make jump conditional drm/nvce/mc: fix msi rearm on GF114 drm/nvc0/gr: fix mthd data submission drm/nouveau: populate master subdev pointer only when fully constructed
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a revert (gen4 backlight seems a lost cause) and a tlb coherency fix for bdw, plus the patch to sign up Jani for co-maintainer. Thanks to Ben for taking care of -fixes while I've enjoyed a bit of vacation. * tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel: MAINTAINERS: Updates for drm/i915 Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM" drm/i915/bdw: Flush system agent on gen8 also
-
Christian Engelmayer authored
Fix a memory leak in the nouveau_crtc_page_flip() error handling path. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
The only BIOS on record that needs the 14 offset has a bios major version 2 but BMP version 1.01. Another bunch of BIOSes that need the 18 offset have BMP version 2.01 or 5.01 or higher. So instead of looking at the bios major version, look at the BMP version. BIOSes with BMP version 0 do not contain a detectable script, so always return 0 for them. See https://bugs.freedesktop.org/show_bug.cgi?id=68835Reported-by: Mauro Molinari <mauromol@tiscali.it> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
- 07 Jan, 2014 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains two patches: * fix the IRC NAT helper which was broken when adding (incomplete) IPv6 support, from Daniel Borkmann. * Refine the previous bugtrap that Jesper added to catch problems for the usage of the sequence adjustment extension in IPVs in Dec 16th, it may spam messages in case of finding a real bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-