- 12 Oct, 2023 4 commits
-
-
Daan De Meyer authored
Update the documentation to mention the new cgroup unix sockaddr hooks. Signed-off-by:
Daan De Meyer <daan.j.demeyer@gmail.com> Link: https://lore.kernel.org/r/20231011185113.140426-8-daan.j.demeyer@gmail.comSigned-off-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
Daan De Meyer authored
Add the necessary plumbing to hook up the new cgroup unix sockaddr hooks into bpftool. Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20231011185113.140426-7-daan.j.demeyer@gmail.comSigned-off-by:
-
Daan De Meyer authored
Add the necessary plumbing to hook up the new cgroup unix sockaddr hooks into libbpf. Signed-off-by:
-
Daan De Meyer authored
These hooks allows intercepting connect(), getsockname(), getpeername(), sendmsg() and recvmsg() for unix sockets. The unix socket hooks get write access to the address length because the address length is not fixed when dealing with unix sockets and needs to be modified when a unix socket address is modified by the hook. Because abstract socket unix addresses start with a NUL byte, we cannot recalculate the socket address in kernelspace after running the hook by calculating the length of the unix socket path using strlen(). These hooks can be used when users want to multiplex syscall to a single unix socket to multiple different processes behind the scenes by redirecting the connect() and other syscalls to process specific sockets. We do not implement support for intercepting bind() because when using bind() with unix sockets with a pathname address, this creates an inode in the filesystem which must be cleaned up. If we rewrite the address, the user might try to clean up the wrong file, leaking the socket in the filesystem where it is never cleaned up. Until we figure out a solution for this (and a use case for intercepting bind()), we opt to not allow rewriting the sockaddr in bind() calls. We also implement recvmsg() support for connected streams so that after a connect() that is modified by a sockaddr hook, any corresponding recmvsg() on the connected socket can also be modified to make the connected program think it is connected to the "intended" remote. Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
- 11 Oct, 2023 3 commits
-
-
Daan De Meyer authored
As prep for adding unix socket support to the cgroup sockaddr hooks, let's add a kfunc bpf_sock_addr_set_sun_path() that allows modifying a unix sockaddr from bpf. While this is already possible for AF_INET and AF_INET6, we'll need this kfunc when we add unix socket support since modifying the address for those requires modifying both the address and the sockaddr length. Signed-off-by:
-
Daan De Meyer authored
As prep for adding unix socket support to the cgroup sockaddr hooks, let's propagate the sockaddr length back to the caller after running a bpf cgroup sockaddr hook program. While not important for AF_INET or AF_INET6, the sockaddr length is important when working with AF_UNIX sockaddrs as the size of the sockaddr cannot be determined just from the address family or the sockaddr's contents. __cgroup_bpf_run_filter_sock_addr() is modified to take the uaddrlen as an input/output argument. After running the program, the modified sockaddr length is stored in the uaddrlen pointer. Signed-off-by:
-
Daan De Meyer authored
These were missed when these hooks were first added so add them now instead to make sure every sockaddr hook has a matching section name test. Signed-off-by:
-
- 09 Oct, 2023 7 commits
-
-
Martin KaFai Lau authored
Martynas Pumputis says: ==================== The patchset fixes the limitation of bpf_*_fib_lookup() helper, which prevents it from being used in BPF dataplanes with network interfaces which have more than one IP addr. See the first patch for more details. Thanks! * v2->v3: Address Martin KaFai Lau's feedback * v1->v2: Use IPv6 stubs to fix compilation when CONFIG_IPV6=m. ==================== Signed-off-by: -
Martynas Pumputis authored
This patch extends the existing fib_lookup test suite by adding two test cases (for each IP family): * Test source IP selection from the egressing netdev. * Test source IP selection when an IP route has a preferred src IP addr. Signed-off-by:
Martynas Pumputis <m@lambda.lt> Link: https://lore.kernel.org/r/20231007081415.33502-3-m@lambda.ltSigned-off-by:
-
Martynas Pumputis authored
Extend the bpf_fib_lookup() helper by making it to return the source IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set. For example, the following snippet can be used to derive the desired source IP address: struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr }; ret = bpf_skb_fib_lookup(skb, p, sizeof(p), BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH); if (ret != BPF_FIB_LKUP_RET_SUCCESS) return TC_ACT_SHOT; /* the p.ipv4_src now contains the source address */ The inability to derive the proper source address may cause malfunctions in BPF-based dataplanes for hosts containing netdevs with more than one routable IP address or for multi-homed hosts. For example, Cilium implements packet masquerading in BPF. If an egressing netdev to which the Cilium's BPF prog is attached has multiple IP addresses, then only one [hardcoded] IP address can be used for masquerading. This breaks connectivity if any other IP address should have been selected instead, for example, when a public and private addresses are attached to the same egress interface. The change was tested with Cilium [1]. Nikolay Aleksandrov helped to figure out the IPv6 addr selection. [1]: https://github.com/cilium/cilium/pull/28283Signed-off-by: -
Ian Rogers authored
A C string lacks alignment so use aligned arrays to avoid potential alignment problems. Switch to using sizeof (less 1 for the \0 terminator) rather than a hardcode size constant. Signed-off-by:
Ian Rogers <irogers@google.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
-
Ian Rogers authored
libbpf accesses the ELF data requiring at least 8 byte alignment, however, the data is generated into a C string that doesn't guarantee alignment. Fix this by assigning to an aligned char array. Use sizeof on the array, less one for the \0 terminator, rather than generating a constant. Fixes: a6cc6b34 ("bpftool: Provide a helper method for accessing skeleton's embedded ELF data") Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Acked-by:
-
David Vernet authored
Now that we support pinning a BPF timer to the current core, we should test it with some selftests. This patch adds two new testcases to the timer suite, which verifies that a BPF timer both with and without BPF_F_TIMER_ABS, can be pinned to the calling core with BPF_F_TIMER_CPU_PIN. Signed-off-by:
David Vernet <void@manifault.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Song Liu <song@kernel.org> Acked-by:
Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20231004162339.200702-3-void@manifault.com
-
David Vernet authored
BPF supports creating high resolution timers using bpf_timer_* helper functions. Currently, only the BPF_F_TIMER_ABS flag is supported, which specifies that the timeout should be interpreted as absolute time. It would also be useful to be able to pin that timer to a core. For example, if you wanted to make a subset of cores run without timer interrupts, and only have the timer be invoked on a single core. This patch adds support for this with a new BPF_F_TIMER_CPU_PIN flag. When specified, the HRTIMER_MODE_PINNED flag is passed to hrtimer_start(). A subsequent patch will update selftests to validate. Signed-off-by:
-
- 06 Oct, 2023 8 commits
-
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle [1], add __counted_by for struct bpf_stack_map. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Stanislav Fomichev <sdf@google.com> Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Link: https://lore.kernel.org/bpf/20231006201657.work.531-kees@kernel.org
-
Geliang Tang authored
Extract duplicate code from these four functions unix_redir_to_connected() udp_redir_to_connected() inet_unix_redir_to_connected() unix_inet_redir_to_connected() to generate a new helper pairs_redir_to_connected(). Create the different socketpairs in these four functions, then pass the socketpairs info to the new common helper to do the connections. Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Link: https://lore.kernel.org/r/54bb28dcf764e7d4227ab160883931d2173f4f3d.1696588133.git.geliang.tang@suse.comSigned-off-by:
-
Andrii Nakryiko authored
We currently expect up to a three-digit number of tests and subtests, so: #999/999: some_test/some_subtest: ... Is the largest test/subtest we can see. If we happen to cross into 1000s, current logic will just truncate everything after 7th character. This patch fixes this truncate and allows to go way higher (up to 31 characters in total). We still nicely align test numbers: #60/66 core_reloc_btfgen/type_based___incompat:OK #60/67 core_reloc_btfgen/type_based___fn_wrong_args:OK #60/68 core_reloc_btfgen/type_id:OK #60/69 core_reloc_btfgen/type_id___missing_targets:OK #60/70 core_reloc_btfgen/enumval:OK Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20231006175744.3136675-3-andrii@kernel.org
-
Andrii Nakryiko authored
Add support for building selftests with -O2 level of optimization, which allows more compiler warnings detection (like lots of potentially uninitialized usage), but also is useful to have a faster-running test for some CPU-intensive tests. One can build optimized versions of libbpf and selftests by running: $ make RELEASE=1 There is a measurable speed up of about 10 seconds for me locally, though it's mostly capped by non-parallelized serial tests. User CPU time goes down by total 40 seconds, from 1m10s to 0m28s. Unoptimized build (-O0) ======================= Summary: 430/3544 PASSED, 25 SKIPPED, 4 FAILED real 1m59.937s user 1m10.877s sys 3m14.880s Optimized build (-O2) ===================== Summary: 425/3543 PASSED, 25 SKIPPED, 9 FAILED real 1m50.540s user 0m28.406s sys 3m13.198s Signed-off-by:
-
Andrii Nakryiko authored
Fix a bunch of potentially unitialized variable usage warnings that are reported by GCC in -O2 mode. Also silence overzealous stringop-truncation class of warnings. Signed-off-by:
-
Yafang Shao authored
Currently, there exists a system-wide setting related to CPU security mitigations, denoted as 'mitigations='. When set to 'mitigations=off', it deactivates all optional CPU mitigations. Therefore, if we implement a system-wide 'mitigations=off' setting, it should inherently bypass Spectre v1 and Spectre v4 in the BPF subsystem. Please note that there is also a more specific 'nospectre_v1' setting on x86 and ppc architectures, though it is not currently exported. For the time being, let's disregard more fine-grained options. This idea emerged during our discussion about potential Spectre v1 attacks with Luis [0]. [0] https://lore.kernel.org/bpf/b4fc15f7-b204-767e-ebb9-fdb4233961fb@iogearbox.netSigned-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
KP Singh <kpsingh@kernel.org> Cc: Luis Gerhorst <gerhorst@cs.fau.de> Link: https://lore.kernel.org/bpf/20231005084123.1338-1-laoar.shao@gmail.com
-
Akihiko Odaki authored
The comment used to say: > Restore data saved by bpf_compute_data_pointers(). But bpf_compute_data_pointers() does not save the data; bpf_compute_and_save_data_end() does. Signed-off-by:
Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by:
-
Geliang Tang authored
CONFIG_VSOCKETS is required by BPF selftests, otherwise we get errors like this: ./test_progs:socket_loopback_reuseport:386: socket: Address family not supported by protocol socket_loopback_reuseport:FAIL:386 ./test_progs:vsock_unix_redir_connectible:1496: vsock_socketpair_connectible() failed vsock_unix_redir_connectible:FAIL:1496 So this patch enables it in tools/testing/selftests/bpf/config. Signed-off-by:
-
- 04 Oct, 2023 17 commits
-
-
Andrii Nakryiko authored
Björn Töpel says: ==================== From: Björn Töpel <bjorn@rivosinc.com> Yet another "more cross-building support for RISC-V" series. An example how to invoke a gen_tar build: | make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- CC=riscv64-linux-gnu-gcc \ | HOSTCC=gcc O=/workspace/kbuild FORMAT= \ | SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" -j $(($(nproc)-1)) \ | -C tools/testing/selftests gen_tar Björn ==================== Signed-off-by: -
Björn Töpel authored
The uprobe_multi program was not picked up for the gen_tar target. Fix by adding it to TEST_GEN_FILES. Signed-off-by:
Björn Töpel <bjorn@rivosinc.com> Signed-off-by:
-
Björn Töpel authored
RISC-V has proper lld support. Use that, similar to what x86 does, for urandom_read et al. Signed-off-by:
-
Björn Töpel authored
Some userland programs in the BPF test suite, e.g. urandom_read, is missing cross-build support. Add cross-build support for these programs Signed-off-by:
-
Andrii Nakryiko authored
Björn Töpel says: ==================== From: Björn Töpel <bjorn@rivosinc.com> Commit 08d0ce30 ("riscv: Implement syscall wrappers") introduced some regressions in libbpf, and the kselftests BPF suite, which are fixed with these three patches. Note that there's an outstanding fix [1] for ftrace syscall tracing which is also a fallout from the commit above. Björn [1] https://lore.kernel.org/linux-riscv/20231003182407.32198-1-alexghiti@rivosinc.com/ Alexandre Ghiti (1): libbpf: Fix syscall access arguments on riscv ==================== Signed-off-by:
-
Björn Töpel authored
Add missing sys_nanosleep name for RISC-V, which is used by some tests (e.g. attach_probe). Fixes: 08d0ce30 ("riscv: Implement syscall wrappers") Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/bpf/20231004110905.49024-4-bjorn@kernel.org
-
Björn Töpel authored
SYS_PREFIX was missing for a RISC-V, which made a couple of kprobe tests fail. Add missing SYS_PREFIX for RISC-V. Fixes: 08d0ce30 ("riscv: Implement syscall wrappers") Signed-off-by:
-
Alexandre Ghiti authored
Since commit 08d0ce30 ("riscv: Implement syscall wrappers"), riscv selects ARCH_HAS_SYSCALL_WRAPPER so let's use the generic implementation of PT_REGS_SYSCALL_REGS(). Fixes: 08d0ce30 ("riscv: Implement syscall wrappers") Signed-off-by:
Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by:
-
Daniel Borkmann authored
Tushar Vyavahare says: ==================== Implement a test for the SHARED_UMEM feature in this patch set and make necessary changes/improvements. Ensure that the framework now supports different streams for different sockets. v2->v3: - Set the sock_num at the end of the while loop. - Declare xsk at the top of the while loop. v1->v2: - Remove generate_mac_addresses() and generate mac addresses based on the number of sockets in __test_spec_init() function. [Magnus] - Update Makefile to include find_bit.c for compiling xskxceiver. - Add bitmap_full() function to verify all bits are set to break the while loop in the receive_pkts() and send_pkts() functions. - Replace __test_and_set_bit() function with __set_bit() function. - Add single return check for wait_for_tx_completion() function call. Patch series summary: 1: Move the packet stream from the ifobject struct to the xsk_socket_info struct to enable the use of different streams for different sockets This will facilitate the sending and receiving of data from multiple sockets simultaneously using the SHARED_XDP_UMEM feature. It gives flexibility of send/recive individual traffic on particular socket. 2: Rename the header file to a generic name so that it can be used by all future XDP programs. 3: Move the src_mac and dst_mac fields from the ifobject structure to the xsk_socket_info structure to achieve per-socket MAC address assignment. Require this in order to steer traffic to various sockets in subsequent patches. 4: Improve the receive_pkt() function to enable it to receive packets from multiple sockets. Define a sock_num variable to iterate through all the sockets in the Rx path. Add nb_valid_entries to check that all the expected number of packets are received. 5: The pkt_set() function no longer needs the umem parameter. This commit removes the umem parameter from the pkt_set() function. 6: Iterate over all the sockets in the send pkts function. Update send_pkts() to handle multiple sockets for sending packets. Multiple TX sockets are utilized alternately based on the batch size for improve packet transmission. 7: Modify xsk_update_xskmap() to accept the index as an argument, enabling the addition of multiple sockets to xskmap. 8: Add a new test for testing shared umem feature. This is accomplished by adding a new XDP program and using the multiple sockets. The new XDP program redirects the packets based on the destination MAC address. ==================== Signed-off-by: -
Tushar Vyavahare authored
Add a new test for testing shared umem feature. This is accomplished by adding a new XDP program and using the multiple sockets. The new XDP program redirects the packets based on the destination MAC address. Signed-off-by:
Tushar Vyavahare <tushar.vyavahare@intel.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20230927135241.2287547-9-tushar.vyavahare@intel.com
-
Tushar Vyavahare authored
Modify xsk_update_xskmap() to accept the index as an argument, enabling the addition of multiple sockets to xskmap. Signed-off-by:
-
Tushar Vyavahare authored
Update send_pkts() to handle multiple sockets for sending packets. Multiple TX sockets are utilized alternately based on the batch size for improve packet transmission. Signed-off-by:
-
Tushar Vyavahare authored
The pkt_set() function no longer needs the umem parameter. This commit removes the umem parameter from the pkt_set() function. Signed-off-by:
-
Tushar Vyavahare authored
Improve the receive_pkt() function to enable it to receive packets from multiple sockets. Define a sock_num variable to iterate through all the sockets in the Rx path. Add nb_valid_entries to check that all the expected number of packets are received. Revise the function __receive_pkts() to only inspect the receive ring once, handle any received packets, and promptly return. Implement a bitmap to store the value of number of sockets. Update Makefile to include find_bit.c for compiling xskxceiver. Signed-off-by:
-
Tushar Vyavahare authored
Move the src_mac and dst_mac fields from the ifobject structure to the xsk_socket_info structure to achieve per-socket MAC address assignment. Require this in order to steer traffic to various sockets in subsequent patches. Signed-off-by:
-
Tushar Vyavahare authored
Rename the header file to a generic name so that it can be used by all future XDP programs. Ensure that the xsk_xdp_common.h header file includes include guards. Signed-off-by:
-
Tushar Vyavahare authored
Move the packet stream from the ifobject struct to the xsk_socket_info struct to enable the use of different streams for different sockets. This will facilitate the sending and receiving of data from multiple sockets simultaneously using the SHARED_XDP_UMEM feature. Signed-off-by:
-
- 29 Sep, 2023 1 commit
-
-
Hengqi Chen authored
Golang symbols in ELF files are different from C/C++ which contains special characters like '*', '(' and ')'. With generics, things get more complicated, there are symbols like: github.com/cilium/ebpf/internal.(*Deque[go.shape.interface { Format(fmt.State, int32); TypeName() string;github.com/cilium/ebpf/btf.copy() github.com/cilium/ebpf/btf.Type}]).Grow Matching such symbols using `%m[^\n]` in sscanf, this excludes newline which typically does not appear in ELF symbols. This should work in most use-cases and also work for unicode letters in identifiers. If newline do show up in ELF symbols, users can still attach to such symbol by specifying bpf_uprobe_opts::func_name. A working example can be found at this repo ([0]). [0]: https://github.com/chenhengqi/libbpf-go-symbolsSuggested-by:Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by:
-
