- 14 Jul, 2023 40 commits
-
-
Jack Zhu authored
Add support for external MIPI D-PHY. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Jack Zhu <jack.zhu@starfivetech.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Jack Zhu authored
Add operation on reset for Cadence MIPI-CSI2 RX Controller. Reviewed-by:
-
Jack Zhu authored
Add resets property for Cadence MIPI-CSI2 RX controller Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Jack Zhu authored
Convert DT bindings document for Cadence MIPI-CSI2 RX controller to DT schema format. For compatible, new compatibles should not be messed with conversion, but the original binding did not specify any SoC-specific compatible string, so add the StarFive compatible string. Reviewed-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/max9286.c:1707:34: error: ‘max9286_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov7740.c:1203:34: error: ‘ov7740_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov2680.c:1149:34: error: ‘ov2680_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov2640.c:1290:34: error: ‘ov2640_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/mt9m111.c:1370:34: error: ‘mt9m111_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/isl7998x.c:1557:34: error: ‘isl7998x_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/media/platform/mediatek/mdp/mtk_mdp_core.c:31:34: error: ‘mtk_mdp_comp_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:818:34: error: ‘sun8i_a83t_mipi_csi2_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:751:34: error: ‘sun6i_mipi_csi2_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:401:34: error: ‘sun6i_csi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:627:34: error: ‘mdp_sub_comp_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:49:34: error: ‘mdp_of_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/marvell/mmp-driver.c:364:34: error: ‘mmpcam_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/verisilicon/hantro_drv.c:622:34: error: ‘of_hantro_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/ti/am437x/am437x-vpfe.c:2620:34: error: ‘vpfe_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/samsung/s5p-jpeg/jpeg-core.c:3124:34: error: ‘samsung_jpeg_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/intel/pxa_camera.c:2449:34: error: ‘pxa_camera_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/allegro-dvt/allegro-core.c:3995:34: error: ‘allegro_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/ir-rx51.c:264:34: error: ‘ir_rx51_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/gpio-ir-tx.c:24:34: error: ‘gpio_ir_tx_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/gpio-ir-recv.c:197:34: error: ‘gpio_ir_recv_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/cec/platform/tegra/tegra_cec.c:457:34: error: ‘tegra_cec_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/media/cec/platform/meson/ao-cec.c:711:34: error: ‘meson_ao_cec_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/media/cec/i2c/ch7322.c:583:34: error: ‘ch7322_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Zelong Dong authored
Supports MMIO regmaps to access controller registers in Meson IR driver. Signed-off-by:
Zelong Dong <zelong.dong@amlogic.com> Signed-off-by:
-
Zelong Dong authored
There are more registers to come in the next Meson IR Controller. For defining clearly, rename register macros. Signed-off-by:
-
Zelong Dong authored
There are more registers to come in the next Meson IR Controller. For defining clearly, sort register macros and let address and bit macros as a set. Signed-off-by:
-
Arnd Bergmann authored
The register abstraction has wrappers around both the normal writel() and its writel_relaxed() counterpart, but this has led to a lot of users ending up with the relaxed version. There is sometimes a need to intentionally pick the relaxed accessor for performance critical functions, but I noticed that each hantro_reg_write() call also contains a non-relaxed readl(), which is typically much more expensive than a writel, so there is little benefit here but an added risk of missing a serialization against DMA. To make this behave like other interfaces, use the normal accessor by default and only provide the relaxed version as an alternative for performance critical code. hantro_postproc.c is the only place that used both the relaxed and normal writel, but this does not seem cricital either, so change it all to the normal ones. [hverkuil: fix function prototype alignment] Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by:
-
Arnd Bergmann authored
In some configurations, gcc decides not to inline the register accessor functions, which in turn leads to lots of temporary hantro_reg structures on the stack that cannot be eliminated because they escape into an uninlined function: drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c:1022:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] Mark all of these as __always_inline so the compiler is able to completely eliminate the temporary structures instead, which brings the stack usage back down to just the normal local variables. Closes: https://lore.kernel.org/oe-kbuild-all/202306151506.goHEegOd-lkp@intel.com/ [hverkuil: fix function prototype alignment, wrap commit log] Reported-by:
kernel test robot <lkp@intel.com> Fixes: 727a4006 ("media: verisilicon: Add Rockchip AV1 decoder") Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Yunfei Dong authored
Will cause below warning then reboot when exercising the decoder with fluster on mt8192-asurada-spherion. This deinit function is called on the v4l2 release callback, even though the work might not have been initialized as that only happens if/when the codec specific 'decode' callback is called (as a result of device_run m2m callback). CPU: 5 PID: 2338 Comm: gst-launch-1.0 Tainted: G W 6.4.0-rc5-next-20230607+ #475 Hardware name: Google Spherion (rev0 - 3) (DT) pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __flush_work.isra.0+0x23c/0x258 lr : __cancel_work_timer+0x14c/0x1c8 sp : ffff8000896e3b00 x29: ffff8000896e3b00 x28: ffff57c3d4079f80 x27: 0000000000000000 x26: ffff57c3d4079f80 x25: ffffb76395b59dc8 x24: 0000000000000001 x23: ffffb763928daab8 x22: ffff57c3d4079f80 x21: 0000000000000000 x20: ffffb763955f6778 x19: ffff57c3cf06f4a0 x18: 0000000000000000 x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000 x14: ffff57c3c03a1f80 x13: ffffa0616a2fc000 x12: 000000003464d91d x11: 0000000000000000 x10: 0000000000001b10 x9 : ffffb763928de61c x8 : ffff57c3d407baf0 x7 : 0000000000000000 x6 : ffff57c3d4079f80 x5 : ffff57c3d4079f80 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff8000896e3bf0 x1 : 0000000000000011 x0 : 0000000000000000 Call trace: __flush_work.isra.0+0x23c/0x258 __cancel_work_timer+0x14c/0x1c8 cancel_work_sync+0x1c/0x30 vdec_msg_queue_deinit+0xac/0xc8 vdec_h264_slice_deinit+0x64/0xb8 vdec_if_deinit+0x3c/0x68 mtk_vcodec_dec_release+0x20/0x40 fops_vcodec_release+0x50/0xd8 v4l2_release+0x7c/0x100 __fput+0x80/0x270 ____fput+0x18/0x30 task_work_run+0x78/0xe0 do_notify_resume+0x29c/0x7f8 el0_svc+0xa4/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 ---[ end trace 0000000000000000 ]--- Fixes: 297160d4 ("media: mediatek: vcodec: move core context from device to each instance") Reported-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Nikolay Burykin authored
After having been assigned to NULL value at cx23885-dvb.c:1202, pointer '0' is dereferenced at cx23885-dvb.c:2469. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Nikolay Burykin <burikin@ivk.ru> Signed-off-by:
-
Dmitry Antipov authored
Handle (and warn about) possible error waiting for MSGCODE_PING result. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
-
Arnd Bergmann authored
The mtk8195_jpegenc_drvdata object was added outside of an #ifdef causing a harmless build warning. drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1879:32: error: 'mtk8195_jpegenc_drvdata' defined but not used [-Werror=unused-variable] 1879 | static struct mtk_jpeg_variant mtk8195_jpegenc_drvdata = { | ^~~~~~~~~~~~~~~~~~~~~~~ A follow-up patch moved it inside of an #ifdef, which caused more warnings, and a third patch ended up adding even more #ifdefs. These were all bogus, since the actual problem here is the incorrect use of of_ptr(). Since the driver (like any other modern platform driver) only works in combination with CONFIG_OF, there is no point in hiding the reference, so just remove that along with all the pointless #ifdef checks in the driver. This improves build coverage and avoids running into the same problem again when another part of the driver gets changed that relies on the #ifdef blocks to be completely matched. Fixes: 934e8bcc ("mtk-jpegenc: support jpegenc multi-hardware") Fixes: 4ae47770 ("media: mtk-jpegenc: Fix a compilation issue") Fixes: da4ede4b ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks") Signed-off-by: -
Ming Qian authored
imx jpeg encoder and decoder support 4 slots each, aim to support some virtualization scenarios. driver should only enable one slot one time. but due to some hardware issue, only slot 0 can be enabled in imx8q platform, and they may be fixed in imx9 platform. Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Nicolas Dufresne authored
The path did not match the one it was submitted into linux-firmware which prevented generic distribution from having working CODEC. Fixes: 9f599f35 ("media: amphion: add vpu core driver") Signed-off-by:
-
Alexander Stein authored
This simplifies the code and silences -517 error messages. Also the reason is listed in /sys/kernel/debug/devices_deferred. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
-
