Quoted strings that were broken over multiple lines are put on a
single line for easier grep'ability.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function cfg80211_inform_bss returns a pointer to a referenced struct cfg80211_bss
but no information is needed from this struct in function prism2_scan and therefore
we release it by calling cfg80211_put_bss.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Free dev on failure as done elsewhere in the function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typos in staging/sep.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
ACKed-by: Larry Finger <Larry.finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This will come in handy again when we move to multiple buffers
so lets pull it out into a little utility function now.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This will be needed when multiple buffer support is added.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This avoids some code duplication by using the generic form
in a non performance critical place.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using this generic function adds a little overhead to a slow path but
reduces the amount of code repitition in exchange.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using this generic function cuts down on repeated code at the cost of
a little overhead in a slow path.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using this generic function cuts down on repeated code at the cost
of some computation in a slow path.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now the generic function caches the scan size a lot of what was here
was redundant and is removed.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now the generic version caches the scan size the version in this driver
is redundant.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Here some addition elements are needed, but this generic function cuts
down on the amount of code.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is not a fast path, so although the original code was more consise
use the generic case to cut down on code repitition.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is just a locally cached value that is device specific (rather
than buffer specific.) Hence it wants to come out of the buffer before
we add multiple buffer support.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Principal reason is to make later patches more coherent and easier to review
but this set in itself separates a logical entity out nicely wihin the code.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds device tree support to the LPC32xx's ADC.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using regmap for accessing register through i2c bus. This will
remove the code for caching registers, read-modify-write logics.
Also it will provide the debugfs feature to dump register
through regmap debugfs.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ISL29018/ISL29028 is from Intersil Corporation and making the
vendor prefix for this part as "isil" for OF compatibity.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warnings by adding __user annotation to stucts.

This patch fixes the the following sparse warnings:

drivers/staging/android/binder.c:1343:76: warning:
	incorrect type in argument 2 (different address spaces)
	drivers/staging/android/binder.c:1343:76:
	expected void [noderef] <asn:1>*ptr
	drivers/staging/android/binder.c:1343:76: got void *binder
drivers/staging/android/binder.c:1567:57: warning:
	incorrect type in argument 2 (different address spaces)
	drivers/staging/android/binder.c:1567:57:
	expected void const [noderef] <asn:1>*from
	drivers/staging/android/binder.c:1567:57:
	got void const *buffer
drivers/staging/android/binder.c:1573:46: warning:
	incorrect type in argument 2 (different address spaces)
	drivers/staging/android/binder.c:1573:46:
	expected void const [noderef] <asn:1>*from
	drivers/staging/android/binder.c:1573:46:
	got void const *offsets
drivers/staging/android/binder.c:1603:76: warning:
	incorrect type in argument 2 (different address spaces)
	drivers/staging/android/binder.c:1603:76:
	expected void [noderef] <asn:1>*ptr
	drivers/staging/android/binder.c:1603:76: got void *binder
drivers/staging/android/binder.c:1605:64: warning:
	incorrect type in argument 2 (different address spaces)
	drivers/staging/android/binder.c:1605:64:
	expected void [noderef] <asn:1>*ptr
	drivers/staging/android/binder.c:1605:64: got void *binder
drivers/staging/android/binder.c:1605:76: warning:
	incorrect type in argument 3 (different address spaces)
	drivers/staging/android/binder.c:1605:76:
	expected void [noderef] <asn:1>*cookie
	drivers/staging/android/binder.c:1605:76: got void *cookie
drivers/staging/android/binder.c:1613:40: error:
	incompatible types in comparison
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In their current AOSP tree, the Android in-kernel wakelock
infrastructure has been reimplemented in terms of wakeup
sources:
http://git.linaro.org/gitweb?p=people/jstultz/android.git;a=commitdiff;h=e9911f4efdc55af703b8b3bb8c839e6f5dd173bb

The Android alarm driver currently has stubbed out calls
to wakelock functionality. So this patch simply converts
the stubbed out wakelock calls to wakeup source calls, and
removes the empty wakelock macros

Greg, would you mind queuing this in staging-next?

CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead

Cc: Jarod Wilson <jarod@wilsonet.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead

Cc: Jarod Wilson <jarod@wilsonet.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Andrew Miller <amiller@amilx.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Cc: Jarod Wilson <jarod@wilsonet.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Ian Abbott <abbotti@mev.co.uk>
CC: Mori Hess <fmhess@users.sourceforge.net>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Ian Abbott <abbotti@mev.co.uk>
CC: Mori Hess <fmhess@users.sourceforge.net>
CC: "J. Ali Harlow" <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: "David Täht" <d@teklibre.com>
CC: Hitoshi Nakamori <hitoshi.nakamori@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: "David Täht" <d@teklibre.com>
CC: Hitoshi Nakamori <hitoshi.nakamori@gmail.com>
CC: "Ken O'Brien" <kernel@kenobrien.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Jakub Schmidtke <sjakub@gmail.com>
CC: Pekka Paalanen <pq@iki.fi>
CC: Peter Huewe <peterhuewe@gmx.de>
CC: "Ken O'Brien" <kernel@kenobrien.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to initialize a static array to NULL at startup, so we
can use the module_usb_driver() call for the go7007 module.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that our module_init/exit path is just registering and unregistering
the usb driver, we can use module_usb_driver() instead.  This also has
the nice side affect of removing the unneeded printk for the module
version number.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
CC: Julia Lawall <julia@diku.dk>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These pcm values should all be stopped properly when the device is
removed from the system (i.e. when disconnect is called), so there's no
need to duplicate this when the module is unloaded as well.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
CC: Julia Lawall <julia@diku.dk>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only allocate the version request buffer if it is needed, not when the
module starts up.  This will let us make the module_init path much
smaller.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
CC: Julia Lawall <julia@diku.dk>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>