Update comments in comedi.h accordingly.
Signed-off-by: W. Trevor King <wking@drexel.edu>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The mask value in the read_raw/write_raw is absolute
value, not the bit position value.
Fixing this in the implemented function to check value,
not with the bit position value.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

release_firmware() deals gracefullt with NULL pointers - it's
redundant to check for them before calling the function.

Also remove a few pointless comments - it's rather obvious from the
code that kfree() free's a buffer and that release_firmware() releases
firmware - comments just stating that add no value.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checking for a NULL pointer before calling release_firmware() is
redundant since the function does that check itself.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow the default values for the module parameters for the default
initial buffer size and default maximum buffer size to be specified in
the kernel configuration.

I'm not sure what the defaults for the defaults for the defaults should
be, but 64 KiB seems to small, so I used values suggested by Bernd Porr,
which are 2048 KiB for the default initial buffer size and 20480 for the
default maximum buffer size.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For comedi subdevices that support asynchronous transfer commands, the
initial buffer size and maximum buffer size for the transfer are both
set to 64 KiB when the comedi device is "attached" to the hardware
device.  For many applications with reasonable fast sample rates and
slow user-space (e.g. Python) these sizes are a bit too small.

A task with CAP_SYS_ADMIN privileges can change the maximum buffer size
for a comedi subdevice with an ioctl call or by writing to a device
attribute file in sysfs, but that's not very convenient.  For comedi
devices attached during system startup, this could be done by a start-up
script, but for hot-plugged devices it would require scripts run by udev
rules, etc.

Rather than use hardwired values, this patch introduces a couple of
module parameters to set the defaults for the initial buffer size
(comedi_default_buf_size_kb) and maximum buffer size
(comedi_default_buf_maxsize_kb).  These values are applied in place of
the previous hard-wired values when the comedi device is "attached".
The module parameter values are in units of KiB for consistency with the
existing device attribute files.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch implements the basic single data conversion support for
the SPEAr600 SoC ADC. The register layout of SPEAr600 differs a bit
from other SPEAr SoC variants (e.g. SPEAr3xx). These differences are
handled via DT compatible testing. Resulting in a multi-arch binary.

This driver is currently tested only on SPEAr600. Future patches may add
support for other SoC variants (SPEAr3xx) and features like software
buffer or DMA.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Intersil's ISL29028 is concurrent Ambient Light and
Proximity Sensor device.
Add driver to access the light and IR intensity and
proximity value via iio interface.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding channel info IIO_CHAN_INFO_SAMP_FREQ to select
different sampling frequency per channel wise.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I was warned long ago that this macro would cause trouble but didn't
heed the advice, hence I'm unwinding it now!
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.

V2 has the cleanup Lars-Peter suggested.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.

Note the addition of extend_name = "supply" for the supply voltage
adc.  This brings this driver into line with the other adis parts.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.

Note that previously the supply was not indexed. I have made
it indexed for consistency with other similar devices and
for internal consistency with the aux adc port.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is being removed to simplify ongoing maintenance
so we need to unwind and remaining users.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I can't envision a case where this is not constant and we
don't seem to have any in tree, so lets clear up this loose
end.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a lot of pointers to structures used in here that are not
declared unless a particular header is included first.  Deal with
the IIO specific ones by putting in forward declarations and the
other ones by including kernel.h and device.h.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

falling is repeated in some entries instead of 1x falling and 1x rising
for the entry.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The IIO_LIGHT channel was not marked as being a processed_val despite
clearly being in lux.

The IIO_INTENSITY channel reads were dependent on channel and that isn't
specified for either adc (as they now use modifiers).  Hence use the
modifier instead.
Reported-by: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was marked as BROKEN back in 2008. It is because the tty handling
in the driver is really broken.

There was some activity in January 2012 to fix the driver, but the
patch was commented to be bogus:
  https://lkml.org/lkml/2012/1/29/160
and we have not heard back from the author since then:
  https://lkml.org/lkml/2012/3/28/412

So since nobody stepped in and rewrote the driver, it is time to move
it out of line now. And drop it some time later if nobody comes up
with patches to fix the driver in staging.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrea Shepard <andrea@persephoneslair.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spatch http://coccinelle.lip6.fr/rules/array.cocci did these.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Given these drivers only try to add the trigger if a valid
irq is present it is clearer to check the same condition when
deciding whether to remove it on a later trigger.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checking indio_dev->modes is uggly and not symmetric with the conditions
on whether triggers are allowed in the first place.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When moving over to the new sw_ring_preenable I managed to add
this callback to only one of the two iio_info structures. As
such only some devices will currently work.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I have no idea how I managed to munge the previous
patch related to this.  Sorry all.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3a0db721

    "TTY: serial, move 68360 driver to staging"

did so because the driver had remained broken since 2008.  It also
added this text to the TODO file:

   "If no one steps up to adopt any of these drivers, they will
    be removed in the 3.4 release."

A quick search on the internet doesn't reveal anyone actively
trying to update/fix this driver, so follow through on the above
and remove it from the pending 3.4 release.

Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For now just implementing the exporting APIs, not yet importing.  And
kmap is rejected on tiled buffers (although the usefulness of that seems
questionable, but could be added later if needed).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbdux_attach_common() prints two messages via dev_info() that shows a
device has been attached.  The first of these messages includes an index
into a static array that the function determines by pointer subtraction,
assuming the pointer passed to the function points to an element of the
array.  Dan Carpenter pointed out that this was kind of ugly.  Since the
dev_info() that prints the array index doesn't add anything useful
(since no other messages print the array index and nothing else uses
it), let's just get rid of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the usbdux driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the amplc_pci224 driver to use the new attach_pci() hook in
struct comedi_driver to auto-configure probed PCI devices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>