- 10 Apr, 2024 5 commits
-
-
Imre Deak authored
Add a workaround to fix timing issues on links with DSC enabled - presumedly related to the audio functionality. Bspec requires enabling this workaround if audio is enabled on ADLP, however Windows enables it whenever DSC is enabled ADLP onwards; follow Windows. Bspec: 50490, 55424 v2: Fix WA code comment formatting. (Ankit) Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-5-imre.deak@intel.com
-
Imre Deak authored
Add a workaround to fix BS-BS jitter issues on MST links, aligning DPT/DPTP MTPs. Bspec: 50050, 55424 Reviewed-by:
-
Imre Deak authored
Add a workaround to fix BS jitter issues on MST links if the HBLANK period is less than 1 MTP. The WA applies only to UHBR rates while on non-UHBR the specification requires disabling it explicitly - presumedly because the register's reset value has the WA enabled. Bspec: 50050, 55424 Reviewed-by:
-
Imre Deak authored
Add a workaround to fix BS (blank start) to BS jitter issues on MST links when FEC is enabled. Neither Bspec requires this nor Windows clears the WA when disabling the output - presumedly because CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so follow suit. Bspec: 50050, 55424 Reviewed-by:
-
Jani Nikula authored
Continue with placing debugfs next to the implementation. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408094357.3085319-1-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
- 09 Apr, 2024 13 commits
-
-
Ville Syrjälä authored
Add a small helper to compute the set of pipes that the current crtc is using. And we have at least one trivial place in intel_ddi_update_active_dpll() where we can use it immediately, so let's do that. v2: Use the name 'pipe_crtc' for the per-pipe crtc pointer Tested-by:
Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by:
Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Pass the connector explicitly to intel_dp_need_bigjoiner() so that it'll actually check the correct place for the bigjoiner force flag. Tested-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
intel_dp_mst_compute_config() is missing the "does the joiner need DSC?" check despite claiming to have a lot of other joiner/dsc stuff in there (albeit disabled). Replicate the logic from the SST side. TODO: refactor all this duplicated code! Tested-by:
-
Ville Syrjälä authored
Pull the "does joiner need DSC?" check into a helper. MST will want to use this too at some point. Tested-by:
-
Ville Syrjälä authored
Rename intel_dp_can_bigjoiner() to intel_dp_has_bigjoiner() to better reflect its function. Tested-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Jani Nikula authored
Prefer common check_add_overflow() from overflow.h over the locally rolled versions of it. While check_add_overflow() does require a variable to assign to, unlike add_overflows_t(), it's still better than having multiple versions around. Cc: Kees Cook <keescook@chromium.org> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405202625.2525671-1-jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
The info is related to display, and should be placed under i915->display. Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Jani Nikula authored
The info is related to display, and should be placed under i915->display. Reviewed-by:
-
Jani Nikula authored
The info is related to display, and should be placed under i915->display. Reviewed-by:
-
Jani Nikula authored
The info is related to display, and should be placed under i915->display. Start a new irq sub-substruct. Reviewed-by:
-
Jani Nikula authored
The info is related to display, and should be placed under i915->display. Reviewed-by:
-
Jani Nikula authored
The info is related to display, and should be placed under i915->display. Reviewed-by:
-
Jani Nikula authored
The same info is available in i915_cdclk_info. Reviewed-by:
-
- 08 Apr, 2024 20 commits
-
-
Ville Syrjälä authored
With bigjoiner the master crtc is the one that will send out the uapi event/etc. We want that to happen after all the slaves are done, so let's try to do the commits in reverse order so that the master comes last. Even worse, the modeset helper will simply complete the commit on the slave pipe immediately as it consider the crtc to be inactive (it can't see our crtc_state->hw.active/etc.). With regular sync updates this generally doesn't matter all that much as the slave pipe should typically finish its work during the same frame as the master pipe. However in case the slave pipe's commit slips into the next frame we end up in a bit of trouble. This is most visible with either async flips (currently disabled with bigjoiner exactly for this reason), and DSB gamma updates. With DSB the problem happens because the DSB itself will wait until the next start vblank before starting to execute. So if the master pipe already finished its commit and the DSB on the slave pipe is still waiting for the next vblank we will assume the DSB as gotten stuck and terminate it. Reversing the commit order should ameliarate this for the most part as the master pipe is guaranteed to start its commit after the slave pipe started. The one thing that can still screw us over is the fact that we aren't necessarily going to commit the pipes in the reverse order as the actual order is dictated by the DDB overlap avoidance. But that can only happen while other pipes are being enabled/disabled, and so in the normal steady state we should be safe. The full fix will involve making the commit machinery aware of the slave pipes and not finish their commits prematurely. But that will involve a bit more work than this. And this commit order reversal will still be beneficial to avoid userspace getting an -EBUSY from the following page flip if the second pipe's commit does stretch into the next frame. Signed-off-by:
-
Ville Syrjälä authored
Currently intel_modeset_pipe_config_late() is called after the bigjoiner state copy, and it will actually not do anything for bigjoiner slaves. This can lead to a mismatched state between the master and slave. The two things that we do in the encoder .compute_config_late() hook are mst master transcoder and port sync master transcoder elections. So if either of either MST or port sync is combined with bigjoiner then we can see the mismatch. Currently this problem is more or less theoretical; MST+bigjoiner has not been implemented yet, and port sync+bigjoiner would require a tiled display with >5k tiles (or a very high dotclock per tile). Although we do have kms_tiled_display in igt which can fake a tiled display, and we can now force bigjoiner via debugfs, so it is possible to trigger this if you try hard enough. Reorder the code such that intel_modeset_pipe_config_late() will be called before the bigjoiner state copy happens so that both pipes will end up with the same state. Tested-by:
-
Ville Syrjälä authored
All joined pipes share the same transcoder/timing generator. Currently we just do the commits per-pipe, which doesn't really work if we need to change switch between non-VRR and VRR timings generators on the fly, or even when sending the push to the transcoder. For now just disable VRR when bigjoiner is needed. Cc: stable@vger.kernel.org Tested-by:
-
Ville Syrjälä authored
All joined pipes share the same transcoder/timing generator. Currently we just do the commits per-pipe, which doesn't really work if we need to change the timings at the same time. For now just disable live M/N updates when bigjoiner is needed. Cc: stable@vger.kernel.org Tested-by:
-
Ville Syrjälä authored
The current modeset sequence can't handle port sync and bigjoiner at the same time. Refuse port sync when bigjoiner is needed, at least until we fix the modeset sequence. v2: Add a FIXME (Vandite) Cc: stable@vger.kernel.org Tested-by:
-
Ville Syrjälä authored
Bigjoiner seem to be causing all kinds of grief to the PSR code currently. I don't believe there is any hardware issue but the code simply not handling this correctly. For now just disable PSR when bigjoiner is needed. Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.comReviewed-by:
Arun R Murthy <arun.r.mruthy@intel.com> Acked-by:
Jouni Högander <jouni.hogander@intel.com> Signed-off-by:
-
Jani Nikula authored
There's a bunch of unnecessary stuff not needed by display code. Remove. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Jani Nikula authored
It's only there for GEM_BUG_ON(), but the display code no longer uses it. Good riddance. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Jani Nikula authored
There's a bunch of unused cruft. Just throw away. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Jani Nikula authored
All the users are in display, move the fixed point header under display. We could also consider making these more general purpose things, but that takes a bunch more effort. This allows the immediate cleanup of xe compat i915_fixed.h. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Jani Nikula authored
Avoid the dependency on intel_uc_fw.h, and allow removal of xe compat intel_uc_fw.h. If there needs to be duplication of the URL, at least have the duplication in a sensible way. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Jani Nikula authored
Avoid direct IS_PLATFORM() usage when we have the platform helpers. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Jouni Högander authored
Panel replay has to be enabled on sink side before link training. Take this into account in fastset check and in initial fastset check. Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-9-jouni.hogander@intel.com
-
Jouni Högander authored
Unify enabling and disabling of psr/panel replay for a sink. Modify intel_psr_enable_sink accordingly and use it for both cases. v3: - move psr2_su_region_et_valid to be check for PSR2 only v2: - enable panel replay for sink before link training - write ALPM_CONFIG only for PSR - add DP_PSR_CRC_VERIFICATION only for PSR - take care of disable sink as well Signed-off-by:
-
Jouni Högander authored
Bspec is saying this mask register: Only PSR_MASK[Mask FBC modify] and PSR_MASK[Mask Hotplug] are used in panel replay mode. Status register: Only SRD_STATUS[SRD state] field is used in panel replay mode. Due to this stop writing and reading registers and bits not used by panel replay if panel replay is used. Bspec: 53370, 68920 v2: - use intel_dp_is_edp with PSR_MASK register - handle LunarLake as well - hanle ALPM configuration as well Signed-off-by:
-
Jouni Högander authored
On HPD interrupt we want to check if the reason for HPD was some panel replay error detected by monitor/panel. This is already done for PSR. We want to do this for panel replay as well. Modify intel_psr_short_pulse to support panel replay as well. Signed-off-by:
-
Jouni Högander authored
Currently panel replay is supporting only main link on mode -> Do not update phy power state for non-eDP panel replay. Bspec: 53370 v2: use intel_dp_is_edp to differentiate Signed-off-by:
-
Jouni Högander authored
Currently intel_psr_pause and intel_psr_resume do nothing in case of panel replay. Change them to perform pause and return also in case of panel replay. Signed-off-by:
-
Jouni Högander authored
Current code is setting only intel_crtc_state->has_panel_replay in panel replay case. There are lots of stuff behind intel_crtc_state->has_psr that is needed for panel replay as well. Instead of converting each check to has_psr || has_panel_replay set has_psr in case of panel replay as well. Code can then differentiate between psr and panel replay by using intel_crtc_state->has_panel_replay. Signed-off-by:
-
Jouni Högander authored
We are adding more boolean variable into intel_psr and intel_crtc_state structs. Add some documentation about these for sake of clarity. v2: Modify has_psr + has_panel_replay to mean panel replay Signed-off-by:
-
- 06 Apr, 2024 1 commit
-
-
Ville Syrjälä authored
Currently intel_connector_info(), which prints the per-connector output for i915_display_info, just bails out early if the connector doesn't have a current encoder. That leads to very confusing output where some of your connected (and properly detected) outputs appear to have no enumerated modes. Get rid of the encoder stuff and just rely on the connector itself so that the output is always consistent. Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com>
-
- 05 Apr, 2024 1 commit
-
-
Suraj Kandpal authored
HDCP 1.x capability needs to be checked even if setup is not HDCP 2.x capable. --v2 -Assign hdcp_capable and hdcp2_capable to false [Chaitanya] --v3 -Fix variable assignment [Chaitanya] Fixes: 813cca96 ("drm/i915/hdcp: Add new remote capability check shim function") Signed-off-by:
Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by:
-
