Pull ata updates from Niklas Cassel:

 - Fix an incorrect link_power_management_policy sysfs attribute value.

   We were previously using the same attribute value for two different
   LPM policies (me)

 - Add a ASMedia ASM1166 quirk.

   The SATA host controller always reports that it has 32 ports, even
   though it only has six ports. Add a quirk that overrides the value
   reported by the controller (Conrad)

 - Add a ASMedia ASM1061 quirk.

   The SATA host controller completely ignores the upper 21 bits of the
   DMA address. This causes IOMMU error events when a (valid) DMA
   address actually has any of the upper 21 bits set. Add a quirk that
   limits the dma_mask to 43-bits (Lennert)

* tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
  ahci: asm1166: correct count of reported ports
  ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWN

Pull block fixes from Jens Axboe:

 - RCU warning fix for md (Mikulas)

 - Fix for an aoe issue that lockdep rightfully complained about
   (Maksim)

 - Fix for an error code change in partitioning that caused a regression
   with some tools (Li)

 - Fix for a data direction warning with bi-direction commands
   (Christian)

* tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linux:
  md: fix a suspicious RCU usage warning
  aoe: avoid potential deadlock at set_capacity
  block: Fix WARNING in _copy_from_iter
  block: Move checking GENHD_FL_NO_PART to bdev_add_partition()

Pull io_uring fix from Jens Axboe:
 "Just a single tweak to the newly added IORING_OP_FIXED_FD_INSTALL from
  Paul, ensuring it goes via the audit path and playing it safe by
  excluding it from using registered creds"

* tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linux:
  io_uring: enable audit and restrict cred override for IORING_OP_FIXED_FD_INSTALL

Pull thermal control update from Rafael Wysocki:
 "Remove some dead code from the Intel powerclamp thermal control driver
  (Srinivas Pandruvada)"

* tag 'thermal-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: powerclamp: Remove dead code for target mwait value

Pull power management fixes from Rafael Wysocki:
 "These fix two cpufreq drivers and the cpupower utility.

  Specifics:

   - Fix the handling of scaling_max/min_freq sysfs attributes in the
     AMD P-state cpufreq driver (Mario Limonciello)

   - Make the intel_pstate cpufreq driver avoid unnecessary computation
     of the HWP performance level corresponding to a given frequency in
     the cases when it is known already, which also helps to avoid
     reducing the maximum CPU capacity artificially on some systems
     (Rafael J. Wysocki)

   - Fix compilation of the cpupower utility when CFLAGS is passed as a
     make argument for cpupower, but it does not take effect as expected
     due to mishandling (Stanley Chan)"

* tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/amd-pstate: Fix setting scaling max/min freq values
  cpufreq: intel_pstate: Refine computation of P-state for given frequency
  tools cpupower bench: Override CFLAGS assignments

Pull documentation fixes from Jonathan Corbet:
 "A handful of relatively boring documentation fixes"

* tag 'docs-6.8-fixes' of git://git.lwn.net/linux:
  docs: admin-guide: remove obsolete advice related to SLAB allocator
  doc: admin-guide/kernel-parameters: remove useless comment
  docs/accel: correct links to mailing list archives
  docs/sphinx: Fix TOC scroll hack for the home page

Pull drm fixes from Dave Airlie:
 "Lots going on for rc2, ivpu has a bunch of stabilisation and debugging
  work, then amdgpu and xe are the main fixes. i915, exynos have a few,
  then some misc panel and bridge fixes.

  Worth mentioning are three regressions. One of the nouveau fixes in
  6.7 for a serious deadlock had side effects, so I guess we will bring
  back the deadlock until I can figure out what should be done properly.
  There was a scheduler regression vs amdgpu which was reported in a few
  places and is now fixed. There was an i915 vs simpledrm problem
  resulting in black screens, that is reverted also.

  I'll be working on a proper nouveau fix, it kinda looks like one of
  those cases where someone tried to use an atomic where they should
  have probably used a lock, but I'll see.

  fb:
   - fix simpledrm/i915 regression by reverting change

  scheduler:
   - fix regression affecting amdgpu users due to sched draining

  nouveau:
   - revert 6.7 deadlock fix as it has side effects

  dp:
   - fix documentation warning

  ttm:
   - fix dummy page read on some platforms

  bridge:
   - anx7625 suspend fix
   - sii902x: fix probing and audio registration
   - parade-ps8640: fix suspend of bridge, aux fixes
   - samsung-dsim: avoid using FORCE_STOP_STATE

  panel:
   - simple add missing bus flags
   - fix samsung-s6d7aa0 flags

  amdgpu:
   - AC/DC power supply tracking fix
   - Don't show invalid vram vendor data
   - SMU 13.0.x fixes
   - GART fix for umr on systems without VRAM
   - GFX 10/11 UNORD_DISPATCH fixes
   - IPS display fixes (required for S0ix on some platforms)
   - Misc fixes

  i915:
   - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
   - Drop -Wstringop-overflow (broken on GCC11)

  ivpu:
   - fix recovery/reset support
   - improve submit ioctl stability
   - fix dev open/close races on unbind
   - PLL disable reset fix
   - deprecate context priority param
   - improve debug buffer logging
   - disable buffer sharing across VPU contexts
   - free buffer sgt on unbind
   - fix missing lock around shmem vmap
   - add better boot diagnostics
   - add more debug prints around mapping
   - dump MMU events in case of timeout

  v3d:
   - NULL ptr dereference fix

  exynos:
   - fix stack usage
   - fix incorrect type
   - fix dt typo
   - fix gsc runtime resume

  xe:
   - Make an ops struct static
   - Fix an implicit 0 to NULL conversion
   - A couple of 32-bit fixes
   - A migration coherency fix for Lunar Lake.
   - An error path vm id leak fix
   - Remove PVC references in kunit tests"

* tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits)
  Revert "nouveau: push event block/allowing out of the fence context"
  drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
  drm/sched: Drain all entities in DRM sched run job worker
  drm/amd/display: "Enable IPS by default"
  drm/amd: Add a DC debug mask for IPS
  drm/amd/display: Disable ips before dc interrupt setting
  drm/amd/display: Replay + IPS + ABM in Full Screen VPB
  drm/amd/display: Add IPS checks before dcn register access
  drm/amd/display: Add Replay IPS register for DMUB command table
  drm/amd/display: Allow IPS2 during Replay
  drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs
  drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs
  drm/amd/amdgpu: Assign GART pages to AMD device mapping
  drm/amd/pm: Fetch current power limit from FW
  drm/amdgpu: Fix null pointer dereference
  drm/amdgpu: Show vram vendor only if available
  drm/amd/pm: update the power cap setting
  drm/amdgpu: Avoid fetching vram vendor information
  drm/amdgpu/pm: Fix the power source flag error
  drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions
  ...

Pull asm-generic update from Arnd Bergmann:
 "Just one patch this time, adding Andreas Larsson as co-maintainer for
  arch/sparc. He is volunteering to help since David Miller has become
  much less active over the past few years.

  In turn, I'm helping Andreas get set up as a new maintainer, starting
  with the entry in the MAINTAINERS file"

* tag 'asm-generic-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  MAINTAINERS: Add Andreas Larsson as co-maintainer for arch/sparc

Pull arm SoC fixes from Arnd Bergmann:
 "There are a couple of devicetree fixes for samsung, riscv/sophgo, and
  for TPM device nodes on a couple of platforms.

  Both the Arm FF-A and the SCMI firmware drivers get a number of code
  fixes, addressing minor implementation bugs and compatibility with
  firmware implementations. Most of these bugs relate to the usage of
  xarray and rwlock structures and are fixed by Cristian Marussi"

* tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format
  arm64: dts: Fix TPM schema violations
  ARM: dts: Fix TPM schema violations
  ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
  arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
  firmware: arm_ffa: Handle partitions setup failures
  firmware: arm_ffa: Use xa_insert() and check for result
  firmware: arm_ffa: Simplify ffa_partitions_cleanup()
  firmware: arm_ffa: Check xa_load() return value
  firmware: arm_ffa: Add missing rwlock_init() for the driver partition
  firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()
  firmware: arm_scmi: Fix the clock protocol supported version
  firmware: arm_scmi: Fix the clock protocol version for v3.2
  firmware: arm_scmi: Use xa_insert() when saving raw queues
  firmware: arm_scmi: Use xa_insert() to store opps
  firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.h
  firmware: arm_scmi: Check mailbox/SMT channel for consistency

Pull spi fixes from Mark Brown:
 "As well as a few device IDs and the usual scattering of driver
  specific fixes this contains a couple of core things.

  One is a missed case in error handling, the other patch is a change
  from me raising the number of chip selects allowed by the newly added
  multi chip select support patches to resolve problems seen on several
  systems that exceeded the limit.

  This is not a real solution to the issue but rather just a change to
  avoid disruption to users, one of the options I am considering is just
  sending a revert of those changes if we can't come up with something
  sensible"

* tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix finalize message on error return
  spi: cs42l43: Handle error from devm_pm_runtime_enable
  spi: Raise limit on number of chip selects
  spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
  spi: spi-cadence: Reverse the order of interleaved write and read operations
  spi: spi-imx: Use dev_err_probe for failed DMA channel requests
  spi: bcm-qspi: fix SFDP BFPT read by usig mspi read
  spi: intel-pci: Add support for Arrow Lake SPI serial flash
  spi: intel-pci: Remove Meteor Lake-S SoC PCI ID from the list

Pull gpio fixes from Bartosz Golaszewski:

 - add a quirk to GPIO ACPI handling to ignore touchpad wakeups on GPD
   G1619-04

 - clear interrupt status bits (that may have been set before enabling
   the interrupts) after setting the interrupt type in gpio-eic-sprd

* tag 'gpio-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: eic-sprd: Clear interrupt after set the interrupt type
  gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04

Pull media fixes from Mauro Carvalho Chehab:

 - remove K3 DT prefix from wave5

 - vb2 core: fix missing caps on VIDIO_CREATE_BUFS under certain
   circumstances

 - videobuf2: Stop direct calls to queue num_buffers field

* tag 'media/v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: vb2: refactor setting flags and caps, fix missing cap
  media: media videobuf2: Stop direct calls to queue num_buffers field
  media: chips-media: wave5: Remove K3 References
  dt-bindings: media: Remove K3 Family Prefix from Compatible

Merge cpufreq fixes for 6.8-rc2:

 - Fix the handling of scaling_max/min_freq sysfs attributes in the AMD
   P-state cpufreq driver (Mario Limonciello).

 - Make the intel_pstate cpufreq driver avoid unnecessary computation of
   the HWP performance level corresponding to a given frequency in the
   cases when it is known already, which also helps to avoid reducing
   the maximum CPU capacity artificially on some systems (Rafael J.
   Wysocki).

* pm-cpufreq:
  cpufreq/amd-pstate: Fix setting scaling max/min freq values
  cpufreq: intel_pstate: Refine computation of P-state for given frequency

Merge tag 'drm-misc-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

One regression fixup to samsung-dsim.c module
- The FORCE_STOP_STATE bit is ineffective for forcing DSI link into LP-11 mode,
  causing timing issues and potential bridge failures.
  This patch reverts previous commits and corrects this issue.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126141130.15512-1-inki.dae@samsung.com

This reverts commit eacabb54.

This commit causes some regressions in desktop usage, this will
reintroduce the original deadlock in DRI_PRIME situations, I've
got an idea to fix it by offloading to a workqueue in a different
spot, however this code has a race condition where we sometimes
miss interrupts so I'd like to fix that as well.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-fixes-2024-01-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- PSR fix for HSW
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZbPGBL9lj4DxxIW1@jlahtine-mobl.ger.corp.intel.com

Plenty of ivpu fixes to improve the general stability and debugging, a
suspend fix for the anx7625 bridge, a revert to fix an initialization
order bug between i915 and simpledrm and a documentation warning fix for
dp_mst.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tp77e5fokigup6cgmpq6mtg46kzdw2dpze6smpnwfoml4kmwpq@bo6mbkezpkle

Dave has not been very active on arch/sparc for the past two years.
I have been contributing to the SPARC32 port as well as maintaining
out-of-tree SPARC32 patches for LEON3/4/5 (SPARCv8 with CAS support)
since 2012. I am willing to step up as an arch/sparc (co-)maintainer.

For recent discussions on the matter, see [1] and [2].

[1] https://lore.kernel.org/r/20230713075235.2164609-1-u.kleine-koenig@pengutronix.de
[2] https://lore.kernel.org/r/20231209105816.GA1085691@ravnborg.org/Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11
mode. It seems the bridge internally queues DSI packets and when the
FORCE_STOP_STATE bit is cleared, they are sent in close succession
without any useful timing (this also means that the DSI lanes won't go
into LP-11 mode). The length of this gibberish varies between 1ms and
5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this
case). In our case, the bridge will fail in about 1 per 500 reboots.

The FORCE_STOP_STATE handling was introduced to have the DSI lanes in
LP-11 state during the .pre_enable phase. But as it turns out, none of
this is needed at all. Between samsung_dsim_init() and
samsung_dsim_set_display_enable() the lanes are already in LP-11 mode.
The code as it was before commit 20c82768 ("drm: bridge:
samsung-dsim: Fix init during host transfer") and 0c14d313 ("drm:
bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct
in this regard.

This patch basically reverts both commits. It was tested on an i.MX8M
SoC with an SN65DSI84 bridge. The signals were probed and the DSI
packets were decoded during initialization and link start-up. After this
patch the first DSI packet on the link is a VSYNC packet and the timing
is correct.

Command mode between .pre_enable and .enable was also briefly tested by
a quick hack. There was no DSI link partner which would have responded,
but it was made sure the DSI packet was send on the link. As a side
note, the command mode seems to just work in HS mode. I couldn't find
that the bridge will handle commands in LP mode.

Fixes: 20c82768 ("drm: bridge: samsung-dsim: Fix init during host transfer")
Fixes: 0c14d313 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113164344.1612602-1-mwalle@kernel.org

Change the timer layout in the dtb to fit the format that needed by
the SBI.

Fixes: 967a94a9 ("riscv: dts: add initial Sophgo SG2042 SoC device tree")
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

All entities must be drained in the DRM scheduler run job worker to
avoid the following case. An entity found that is ready, no job found
ready on entity, and run job worker goes idle with other entities + jobs
ready. Draining all ready entities (i.e. loop over all ready entities)
in the run job worker ensures all job that are ready will be scheduled.

Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/all/CABXGCsM2VLs489CH-vF-1539-s3in37=bwuOWtoeeE+q26zE+Q@mail.gmail.com/Reported-and-tested-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3124
Link: https://lore.kernel.org/all/20240123021155.2775-1-mario.limonciello@amd.com/Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Closes: https://lore.kernel.org/dri-devel/05ddb2da-b182-4791-8ef7-82179fd159a8@amd.com/T/#m0c31d4d1b9ae9995bb880974c4f1dbaddc33a48aSigned-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124210811.1639040-1-matthew.brost@intel.com

Merge tag 'amd-drm-fixes-6.8-2024-01-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.8-2024-01-25:

amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240125221503.5019-1-alexander.deucher@amd.com

Driver Changes:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZbIb7l0EhpVp5cXE@fedora

Merge tag 'md-6.8-20240126' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.8

Pull MD fix from Song:

"This change fixes a RCU warning."

* tag 'md-6.8-20240126' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: fix a suspicious RCU usage warning

In __spi_pump_transfer_message(), the message was not finalized in the
first error return as it is in the other error return paths. Not
finalizing the message could cause anything waiting on the message to
complete to hang forever.

This adds the missing call to spi_finalize_current_message().

Fixes: ae7d2346 ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

[Why]
IPS was temporary disabled due to instability.
It was fixed in dmub firmware and with:
- "drm/amd/display: Add IPS checks before dcn register access"
- "drm/amd/display: Disable ips before dc interrupt setting"

[How]
Enable IPS by default.
Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For debugging IPS-related issues, expose a new debug mask
that allows to disable IPS.
Usage:
amdgpu.dcdebugmask=0x800
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
While in IPS2 an access to dcn registers is not allowed.
If interrupt results in dc call, we should disable IPS.

[How]
Safeguard register access in IPS2 by disabling idle optimization
before calling dc interrupt setting api.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Because ABM will wait VStart to start getting histogram data,
 it will cause we can't enter IPS while full screnn video playing.

[How]
Modify the panel refresh rate to the maximun multiple of current
 refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.

[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Introduce a new Replay mode for DMUB version 0.0.199.0
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
Add regkey to block video playback in IPS2 by default

Allow idle optimizations in the same spot we allow Replay for
video playback usecases.

Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer.  On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer.  On GC 9.x and older, this needs
to be set to 0.  This can lead to hangs in some mixed
graphics and compute workloads.  Updated firmware is also
required for AQL.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This allows kernel mapped pages like the PDB and PTB to be
read via the iomem debugfs when there is no vram in the system.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x

Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch
the limit from firmware instead of using cached values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x

amdgpu_reg_state_sysfs_fini could be invoked at the
time when asic_func is even not initialized, i.e.,
amdgpu_discovery_init fails for some reason.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Ony if vram vendor info is available, show in sysfs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x

update the power cap setting for smu_v13.0.0/smu_v13.0.7

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

For GFX 9.4.3 APUs, the current method of fetching vram vendor
information is not reliable. Avoid fetching the information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x