- 08 Jan, 2021 20 commits
-
-
James Smart authored
If the port is configured for NVME and has any outstanding IOs when a FW reset is requesteed, outstanding I/Os are not properly cleaned up. This causes the fw download request to fail. Fix by clearing the LPFC_SLI_ACTIVE flag to signify the I/O must be manually flushed by the driver on port reset. Link: https://lore.kernel.org/r/20210104180240.46824-7-jsmart2021@gmail.comCo-developed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
When lpfc generates a GEN_REQUEST wqe for the nvme LS (such as Create Association), the timeout is set to R_A_TOV without regard to the timeout value supplied by the nvme-fc transport. The driver should be setting the timeout to the value passed into the routine. Additionally the caller should be setting the timeout value to the value in the ls request set by the nvme transport. Instead, it unconditionally is setting it to a driver defined value. So the driver actually overrode the value twice. Fix by using the timeout provided to the routine, and for the caller, set the timeout to the ls request timeout value. Link: https://lore.kernel.org/r/20210104180240.46824-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The driver's management of the fabric controller (aka pseudo-scsi initiator) node in SLI3 mode is causing this crash. The crash occurs because of a node reference imbalance that frees the fabric controller node while devloss is outstanding from the SCSI transport. This is triggered by an odd behavior where the switch reacts to a rejected RDP request with a PLOGI and nothing else, not even a LOGO. The driver ACKS the PLOGI and after successfully registering the RPI, incorrectly registers the fabric controller node because it has the NLP_FC4_FCP flag still set from the fabric controller PRLI. If a LIP is issued, the driver attempts to cleanup on Link Up and ends up executing too many puts. Fix by detecting the fabric node type and clearing out the nodes internal flags that triggered a SCSI transport registration and subsequence dev_loss event. The driver cannot count on any persistence from fabric controller nodes. Link: https://lore.kernel.org/r/20210104180240.46824-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Testing with target ports coming and going, the driver eventually reached a state where it no longer discovered the target. When the driver has issued a PRLI and receives a PRLI from the target, it is not properly updating the node's initiator/target role flags. Thus, when a subsequent RSCN is received for a target loss, the driver mis-identifies the target as an initiator and does not initiate LUN scanning. Fix by always refreshing the ndlp with the latest PRLI state information whenever a PRLI is processed. Also clear the ndlp flags when processing a PLOGI so that there is no carry over through a re-login. Link: https://lore.kernel.org/r/20210104180240.46824-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
A very long time ago, there was a feature: auto sli mode. It gave the user the ability to auto select the SLI mode (SLI2 or SLI3) to run the port in, or even force SLI2 mode if configured. Because of the convoluted logic, the CONFIG_PORT mbox command ends up being called 2 or 3 times. It should have been called only once. Additionally, the driver no longer supports SLI-2, so only SLI-3 mode should be allowed. The following changes were made: - Force module parameter to SLI3 only. - Rip out redundant CONFIG_PORT mbox commands. - Force CONFIG_PORT mbox command to be in beginning of enable ISR routine. - Added changes for offline to online behavior Link: https://lore.kernel.org/r/20210104180240.46824-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Under some pt2pt situations, the other end of the link may issue a LOGO after successfully completing PLOGI and assigning addresses to the port. Thus the driver may attempt a new PLOGI to re-create the login, but the LOGO handling cleared the address back to 0. Once this happens, the other end, which may be address 0, gets all confused and this cannot be resolved without an administrative action to bounce the link. Fix by assuming that address assignment only occurs on the 1st PLOGI after link up, and regardless of login state, the address assignment sticks. The FC standards aren't particularly clear in this situation (it only describes initial PLOGI), but there is nothing that contradicts this and behaviors on the devices tested appears to conform to the understanding. Thus, don't reset the port address to 0 as part of LOGO handling. Port addresses will only reset on link down. Link: https://lore.kernel.org/r/20210104180240.46824-2-jsmart2021@gmail.comCo-developed-by:
-
John Garry authored
Now that the driver always uses managed interrupts, delete auto_affine_msi_experimental module param. Link: https://lore.kernel.org/r/1609763622-34119-2-git-send-email-john.garry@huawei.comSigned-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Bean Huo authored
sprintf and snprintf may cause output defect in sysfs content, it is better to use new added sysfs_emit function which knows the size of the temporary buffer. Link: https://lore.kernel.org/r/20210106211541.23039-1-huobean@gmail.comSuggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Randy Dunlap authored
Use consistent and expected indentation for all Kconfig text. Link: https://lore.kernel.org/r/20210106205554.18082-1-rdunlap@infradead.org Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Tyrel Datwyler authored
The driver's queuecommand routine is still wrapped to hold the host lock for the duration of the call. This will become problematic when moving to multiple queues due to the lock contention preventing asynchronous submissions to mulitple queues. There is no real legitimate reason to hold the host lock, and previous patches have insured proper protection of moving ibmvfc_event objects between free and sent lists. Link: https://lore.kernel.org/r/20210106201835.1053593-6-tyreld@linux.ibm.comReviewed-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Tyrel Datwyler authored
Drain the command queue and place all commands on a completion list. Perform command completion on that list outside the host/queue locks. Further, move purged command compeletions outside the host_lock as well. Link: https://lore.kernel.org/r/20210106201835.1053593-5-tyreld@linux.ibm.comReviewed-by:
-
Tyrel Datwyler authored
Define per-queue locks for protecting queue state and event pool sent/free lists. The evt list lock is initially redundant but it allows the driver to be modified in the follow-up patches to relax the queue locking around submissions and completions. Link: https://lore.kernel.org/r/20210106201835.1053593-4-tyreld@linux.ibm.comReviewed-by:
-
Tyrel Datwyler authored
There is currently a single command event pool per host. In anticipation of providing multiple queues add a per-queue event pool definition and reimplement the existing CRQ to use its queue defined event pool for command submission and completion. Link: https://lore.kernel.org/r/20210106201835.1053593-3-tyreld@linux.ibm.comReviewed-by:
-
Tyrel Datwyler authored
The primary and async CRQs are nearly identical outside of the format and length of each message entry in the dma mapped page that represents the queue data. These queues can be represented with a generic queue structure that uses a union to differentiate between message format of the mapped page. This structure will further be leveraged in a followup patcheset that introduces Sub-CRQs. Link: https://lore.kernel.org/r/20210106201835.1053593-2-tyreld@linux.ibm.comReviewed-by:
-
Bean Huo authored
Transaction Specific Fields (TSF) in the UPIU package could be CDB (SCSI/UFS Command Descriptor Block), OSF (Opcode Specific Field), and TM I/O parameter (Task Management Input/Output Parameter). But, currently, we take all of these as CDB in the UPIU trace. Thus makes user confuse among CDB, OSF, and TM message. So fix it with this patch. Link: https://lore.kernel.org/r/20210105113446.16027-7-huobean@gmail.comAcked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Bean Huo authored
Distinguish between TM request UPIU and response UPIU in TM UPIU trace, for the TM response, let TM UPIU trace print its TM response UPIU. Link: https://lore.kernel.org/r/20210105113446.16027-6-huobean@gmail.comAcked-by:
-
Bean Huo authored
Currently, in the query completion trace print, since we use hba->lrb[tag].ucd_req_ptr and didn't differentiate UPIU between request and response, thus header and transaction-specific field in UPIU printed by query trace are identical. This is not very practical. As below: query_send: HDR:16 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 00 00 00 00 00 query_complete: HDR:16 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 00 00 00 00 00 For the failure analysis, we want to understand the real response reported by the UFS device, however, the current query trace tells us nothing. After this patch, the query trace on the query_send, and the above a pair of query_send and query_complete will be: query_send: HDR:16 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 00 00 00 00 00 ufshcd_upiu: HDR:36 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 01 00 00 00 00 Link: https://lore.kernel.org/r/20210105113446.16027-5-huobean@gmail.comAcked-by:
-
Bean Huo authored
Don't call trace_ufshcd_upiu() in case ufshba_upiu trace poit is not enabled. Link: https://lore.kernel.org/r/20210105113446.16027-4-huobean@gmail.comAcked-by:
-
Bean Huo authored
__print_symbolic() is designed for exporting the print formatting table to userspace and allows parsing tool, such as trace-cmd and perf, to analyze trace log according to this print formatting table, meanwhile, by using __print_symbolic()s, save space in the trace ring buffer. original print format: print fmt: "%s: %s: HDR:%s, CDB:%s", __get_str(str), __get_str(dev_name), __print_hex(REC->hdr, sizeof(REC->hdr)), __print_hex(REC->tsf, sizeof(REC->tsf)) after this change: print fmt: "%s: %s: HDR:%s, CDB:%s", print_symbolic(REC->str_t, {0, "send"}, {1, "complete"}, {2, "dev_complete"}, {3, "query_send"}, {4, "query_complete"}, {5, "query_complete_err"}, {6, "tm_send"}, {7, "tm_complete"}, {8, "tm_complete_err"}), __get_str(dev_name), __print_hex(REC->hdr, sizeof(REC->hdr)), __print_hex(REC->tsf, sizeof(REC->tsf)) Note: This patch just converts current __get_str(str) to __print_symbolic(), the original tracing log will not be affected by this change, so it doesn't break what current parsers expect. Link: https://lore.kernel.org/r/20210105113446.16027-3-huobean@gmail.comAcked-by: -
Bean Huo authored
Current EM macro definition, we use stringize operator '#', which turns the argument it precedes into a quoted string. Thus requires the symbol of __print_symbolic() should be the string corresponding to the name of the enum. However, we have other cases, the symbol and enum name are not the same, we can redefine EM/EMe, but there will introduce some redundant codes. This patch is to remove this restriction, let others reuse the current EM/EMe definition. Link: https://lore.kernel.org/r/20210105113446.16027-2-huobean@gmail.comAcked-by:
-
- 06 Jan, 2021 3 commits
-
-
Kiwoong Kim authored
Set optimized values for the following timeouts: - FC0_PROTECTION_TIMER - TC0_REPLAY_TIMER - AFC0_REQUEST_TIMER Exynos doesn't yet use traffic class #1. Link: https://lore.kernel.org/r/a0ff44f665a4f31d2f945fd71de03571204c576c.1608513782.git.kwmad.kim@samsung.comSigned-off-by:
Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by:
-
Kiwoong Kim authored
The UniPro specification states that attribute IDs of the following parameters are vendor-specific so some SoCs could have no regions at the defined addresses: - DME_LocalFC0ProtectionTimeOutVal - DME_LocalTC0ReplayTimeOutVal - DME_LocalAFC0ReqTimeOutVal In addition, the following parameters should be set considering the compatibility between host and device. - PA_PWRMODEUSERDATA0 - PA_PWRMODEUSERDATA1 - PA_PWRMODEUSERDATA2 - PA_PWRMODEUSERDATA3 - PA_PWRMODEUSERDATA4 - PA_PWRMODEUSERDATA5 Introduce a quirk to allow vendor drivers to override the UniPro defaults. Link: https://lore.kernel.org/r/1fedd3dea0ccc980913a5995a10510d86a5b01b9.1608513782.git.kwmad.kim@samsung.comAcked-by:
-
Stanley Chu authored
Flush during hibern8 is sufficient on MediaTek platforms, thus enable UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL to skip enabling fWriteBoosterBufferFlush during WriteBooster initialization. Link: https://lore.kernel.org/r/20201222072928.32328-1-stanley.chu@mediatek.comReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
- 03 Jan, 2021 1 commit
-
-
Linus Torvalds authored
-
- 02 Jan, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 cleanups from Vasily Gorbik: "Update defconfigs and sort config select list" * tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/Kconfig: sort config S390 select list once again s390: update defconfigs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a crash in intel_pstate during resume from suspend-to-RAM that may occur after recent changes and two resource leaks in error paths in the operating performance points (OPP) framework, add a new C-states table to intel_idle and update the cpuidle MAINTAINERS entry to cover the governors too. Specifics: - Fix recently introduced crash in the intel_pstate driver that occurs if scale-invariance is disabled during resume from suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR values made by the platform firmware (Rafael Wysocki). - Fix a memory leak and add a missing clk_put() in error paths in the OPP framework (Quanyang Wang, Viresh Kumar). - Add new C-states table for SnowRidge processors to the intel_idle driver (Artem Bityutskiy). - Update the MAINTAINERS entry for cpuidle to make it clear that the governors are covered by it too (Lukas Bulwahn)" * tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: add SnowRidge C-state table cpufreq: intel_pstate: Fix fast-switch fallback path opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK -
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: intel_pstate: Fix fast-switch fallback path * pm-cpuidle: intel_idle: add SnowRidge C-state table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
-
- 01 Jan, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two minor block fixes from this last week that should go into 5.11: - Add missing NOWAIT debugfs definition (Andres) - Fix kerneldoc warning introduced this merge window (Randy)" * tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block: block: add debugfs stanza for QUEUE_FLAG_NOWAIT fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few fixes that should go into 5.11, all marked for stable as well: - Fix issue around identity COW'ing and users that share a ring across processes - Fix a hang associated with unregistering fixed files (Pavel) - Move the 'process is exiting' cancelation a bit earlier, so task_works aren't affected by it (Pavel)" * tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block: kernel/io_uring: cancel io_uring before task works io_uring: fix io_sqe_files_unregister() hangs io_uring: add a helper for setting a ref node io_uring: don't assume mm is constant across submits -
Linus Torvalds authored
Commit 436e980e ("kbuild: don't hardcode depmod path") stopped hard-coding the path of depmod, but in the process caused trouble for distributions that had that /sbin location, but didn't have it in the PATH (generally because /sbin is limited to the super-user path). Work around it for now by just adding /sbin to the end of PATH in the depmod.sh script. Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 31 Dec, 2020 3 commits
-
-
Pavel Begunkov authored
For cancelling io_uring requests it needs either to be able to run currently enqueued task_works or having it shut down by that moment. Otherwise io_uring_cancel_files() may be waiting for requests that won't ever complete. Go with the first way and do cancellations before setting PF_EXITING and so before putting the task_work infrastructure into a transition state where task_work_run() would better not be called. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes, however requests keeping them may never complete, e.g. because of some userspace dependency. Make sure it's interruptible otherwise it would hang forever. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by:
-
Pavel Begunkov authored
Setting a new reference node to a file data is not trivial, don't repeat it, add and use a helper. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by:
-
- 30 Dec, 2020 6 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A fix for an edge case in MClientRequest encoding and a couple of trivial fixups for the new msgr2 support" * tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client: libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE libceph: align session_key and con_secret to 16 bytes libceph: fix auth_signature buffer allocation in secure mode ceph: reencode gid_list when reconnecting
-
Artem Bityutskiy authored
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville platforms. The following has been changed. 1. C1E latency changed from 10us to 15us. It was measured using the open source "wult" tool (the "nic" method, 15us is the 99.99th percentile). 2. C1E power break even changed from 20us to 25us, which may result in less C1E residency in some workloads. 3. C6 latency changed from 50us to 130us. Measured the same way as C1E. The C6 C-state is supported only by some SnowRidge revisions, so add a C-state table commentary about this. On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even though C6 is present in the table, the driver will only use it if the CPU does support it. Signed-off-by:Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Rafael J. Wysocki authored
When sugov_update_single_perf() falls back to the "frequency" path due to the missing scale-invariance, it will call cpufreq_driver_fast_switch() via sugov_fast_switch() and the driver's ->fast_switch() callback will be invoked, so it must not be NULL. However, after commit a365ab6b ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to NULL when it is going to use intel_cpufreq_adjust_perf(), which is a mistake, because on x86 the scale-invariance may be turned off dynamically, so modify it to retain the original ->adjust_perf() callback pointer. Fixes: a365ab6b ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by:
Kenneth R. Crudup <kenny@panix.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pmRafael J. Wysocki authored
Pull operating performance points (OPP) framework fixes for 5.11-rc2 from Viresh Kumar: "This contains two patches to fix freeing of resources in error paths." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table
-
Heiko Carstens authored
...and add comments at the top and bottom. Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Heiko Carstens authored
Signed-off-by:
-
