- 29 Jan, 2020 18 commits
-
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 39d4a501 ] Function perf_event_ever_overflow() and perf_event_account_interrupt() are called every time samples are processed by the interrupt handler. However function perf_event_account_interrupt() has checks to avoid being flooded with interrupts (more then 1000 samples are received per task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is added to the perf data. The perf subsystem limit calculation is: maximum sample frequency := 100000 --> 1 samples per 10 us task_tick = 10ms = 10000us --> 1000 samples per task_tick The work flow is measurement_alert() uses SDBT head and each SBDT points to 511 SDB pages, each with 126 sample entries. After processing 8 SBDs and for each valid sample calling: perf_event_overflow() perf_event_account_interrupts() there is a considerable amount of samples being dropped, especially when the sample frequency is very high and near the 100000 limit. To avoid the high amount of samples being dropped near the end of a task_tick time frame, increment the sampling interval in case of dropped events. The CPU Measurement sampling facility on the s390 supports only intervals, specifiing how many CPU cycles have to be executed before a sample is generated. Increase the interval when the samples being generated hit the task_tick limit. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 028288df ] In raid1_sync_request func, rdev should be checked before reference. Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
EJ Hsu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit e5b5da96 ] Gadget driver should always use config_ep_by_speed() to initialize usb_ep struct according to usb device's operating speed. Otherwise, usb_ep struct may be wrong if usb devcie's operating speed is changed. The key point in this patch is that we want to make sure the desc pointer in usb_ep struct will be set to NULL when gadget is disconnected. This will force it to call config_ep_by_speed() to correctly initialize usb_ep struct based on the new operating speed when gadget is re-connected later. Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
EJ Hsu <ejh@nvidia.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Jason Yan authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit f70267f3 ] The discovering of sas port is driven by workqueue in libsas. When libsas is processing port events or phy events in workqueue, new events may rise up and change the state of some structures such as asd_sas_phy. This may cause some problems such as follows: ==>thread 1 ==>thread 2 ==>phy up ==>phy_up_v3_hw() ==>oob_mode = SATA_OOB_MODE; ==>phy down quickly ==>hisi_sas_phy_down() ==>sas_ha->notify_phy_event() ==>sas_phy_disconnected() ==>oob_mode = OOB_NOT_CONNECTED ==>workqueue wakeup ==>sas_form_port() ==>sas_discover_domain() ==>sas_get_port_device() ==>oob_mode is OOB_NOT_CONNECTED and device is wrongly taken as expander This at last lead to the panic when libsas trying to issue a command to discover the device. [183047.614035] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [183047.622896] Mem abort info: [183047.625762] ESR = 0x96000004 [183047.628893] Exception class = DABT (current EL), IL = 32 bits [183047.634888] SET = 0, FnV = 0 [183047.638015] EA = 0, S1PTW = 0 [183047.641232] Data abort info: [183047.644189] ISV = 0, ISS = 0x00000004 [183047.648100] CM = 0, WnR = 0 [183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000b7df67be [183047.657834] [0000000000000058] pgd=0000000000000000 [183047.662789] Internal error: Oops: 96000004 [#1] SMP [183047.667740] Process kworker/u16:2 (pid: 31291, stack limit = 0x00000000417c4974) [183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G W OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1 [183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10, BIOS 0.15 10/22/2019 [183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO) [183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw] [183047.717153] sp : ffff00000f28ba60 [183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228 [183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200 [183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0 [183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228 [183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200 [183047.747464] x19: 0000000000f80800 x18: 0000000000000010 [183047.752848] x17: 0000000000000000 x16: 0000000000000000 [183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005 [183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20 [183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870 [183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0 [183047.779770] x7 : 0000000000000000 x6 : 000000000000003f [183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0 [183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007 [183047.795922] x1 : 0000000000000008 x0 : 0000000000000000 [183047.801307] Call trace: [183047.803827] prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.809127] hisi_sas_task_prep+0x750/0x888 [hisi_sas_main] [183047.814773] hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main] [183047.820939] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main] [183047.826757] smp_execute_task_sg+0xec/0x218 [183047.831013] smp_execute_task+0x74/0xa0 [183047.834921] sas_discover_expander.part.7+0x9c/0x5f8 [183047.839959] sas_discover_root_expander+0x90/0x160 [183047.844822] sas_discover_domain+0x1b8/0x1e8 [183047.849164] process_one_work+0x1b4/0x3f8 [183047.853246] worker_thread+0x54/0x470 [183047.856981] kthread+0x134/0x138 [183047.860283] ret_from_fork+0x10/0x18 [183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800) [183047.870097] kernel fault(0x1) notification starting on CPU 0 [183047.875828] kernel fault(0x1) notification finished on CPU 0 [183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE) hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE) [183047.892418] ---[ end trace 4cc26083fc11b783 ]--- [183047.897107] Kernel panic - not syncing: Fatal exception [183047.902403] kernel fault(0x5) notification starting on CPU 0 [183047.908134] kernel fault(0x5) notification finished on CPU 0 [183047.913865] SMP: stopping secondary CPUs [183047.917861] Kernel Offset: disabled [183047.921422] CPU features: 0x2,a2a00a38 [183047.925243] Memory Limit: none [183047.928372] kernel reboot(0x2) notification starting on CPU 0 [183047.934190] kernel reboot(0x2) notification finished on CPU 0 [183047.940008] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.comReported-by:
Gao Chuan <gaochuan4@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit fee92f25 ] On this error path we call qla4xxx_mem_free() and then the caller also calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a couple double frees: drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed Fixes: afaf5a2d ("[SCSI] Initial Commit of qla4xxx") Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountainSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Roman Bolshakov authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 2c2f4bed ] MBA_PORT_UPDATE generates duplicate log lines in target mode because qlt_async_event is called twice. Drop the calls within the case as the function will be called right after the switch statement. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.comAcked-by:
Himanshu Madhani <hmadhani@marvel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Tested-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Bo Wu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 9a1b0b9a ] When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf, dd_data should be freed before return SLI_CONFIG_HANDLED. When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in job_error tag. Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.comSigned-off-by:
Bo Wu <wubo40@huawei.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 44a7b675 ] The driver forgets to call unregister_pernet_subsys() in the error path of cma_init(). Add the missed call to fix it. Fixes: 4be74b42 ("IB/cma: Separate port allocation to network namespaces") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.comSigned-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Leonard Crestez authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 42a6b25e ] Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Ioanna Alifieraki authored
BugLink: https://bugs.launchpad.net/bugs/1851243 This commit breaks r/w access to files. Since fixing it requires many commits to be backported revert it to avoid risk of regressions. For detailed description please look at LP #1851243. This reverts commit c8838e8e. Signed-off-by:
Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1853375 The packet fanout test generates UDP traffic and reads this with a pair of packet sockets, testing the various fanout algorithms. Avoid non-determinism from reading unrelated background traffic. Fanout decisions are made before unrelated packets can be dropped with a filter, so that is an insufficient strategy [*]. Run the packet socket tests in a network namespace, similar to msg_zerocopy. It it still good practice to install a filter on a packet socket before accepting traffic. Because this is example code, demonstrate that pattern. Open the socket initially bound to no protocol, install a filter, and only then bind to ETH_P_IP. Another source of non-determinism is hash collisions in FANOUT_HASH. The hash function used to select a socket in the fanout group includes the pseudorandom number hashrnd, which is not visible from userspace. To work around this, the test tries to find a pair of UDP source ports that do not collide. It gives up too soon (5 times, every 32 runs) and output is confusing. Increase tries to 20 and revise the error msg. [*] another approach would be to add a third socket to the fanout group and direct all unexpected traffic here. This is possible only when reimplementing methods like RR or HASH alongside this extra catch-all bucket, using the BPF fanout method. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (backported from commit cc30c93f) [PHLin: backported as some variables haven't been changed yet] Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
-
Mike Maloney authored
BugLink: https://bugs.launchpad.net/bugs/1853375 sock_fanout_open no longer sets the size of packet_socket ring, so stop passing the parameter. Signed-off-by:
Mike Maloney <maloney@google.com> Acked-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1850540 This allows to roll out the support for the alternate layout which accidentally got introduced since kernel v3.14+ without causing breakage on reboot. The real danger is moving between a 3.13 or older kernel and any newer. This either has already happened and the damage has potentially been done or is not yet immediate or not happening at all (if the raid0 array was created by a 3.14+ kernel). So it is better to just warn from the kernel or once the user-space tool supporting meta-data update gets rolled out, from there as well. Once user-space is in place an with a bit of waiting time this change should get reverted later. Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
dann frazier authored
BugLink: https://bugs.launchpad.net/bugs/1850540 Helping an administrator understand this issue and how to deal with it requires more text than achievable in a kernel error message. Let's clarify the issue in the Ubuntu wiki, and have the kernel emit a link to it. I've submitted a similar change upstream: https://marc.info/?l=linux-raid&m=157360088014027&w=2 Should it get merged, we should consider replacing this patch with that one. Otherwise, it is probably safe to drop this SAUCE patch after focal. Signed-off-by:
dann frazier <dann.frazier@canonical.com> (cherry picked from bionic/18.04 submission into xenial/16.04) Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1850540 [ Upstream commit e3fc3f3d ] The first argument to WARN() is supposed to be a condition. The original code will just print the mdname() instead of the full warning message. Fixes: c84a1372 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Signed-off-by:
-
Song Liu authored
BugLink: https://bugs.launchpad.net/bugs/1850540 [ Upstream commit 3874d73e ] The message should match the parameter, i.e. raid0.default_layout. Fixes: c84a1372 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: NeilBrown <neilb@suse.de> Reported-by:
Ivan Topolsky <doktor.yak@gmail.com> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1850540 Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1850540 [ Upstream commit c84a1372 ] If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by:
-
- 28 Jan, 2020 1 commit
-
-
YueHaibing authored
CVE-2019-20096 If dccp_feat_push_change fails, we forget free the mem which is alloced by kmemdup in dccp_feat_clone_sp_val. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: e8ef967a ("dccp: Registration routines for changing feature values") Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 15 Jan, 2020 4 commits
-
-
Marcelo Henrique Cerri authored
Signed-off-by: -
Marcelo Henrique Cerri authored
BugLink: https://bugs.launchpad.net/bugs/1859718 Properties: no-test-build Signed-off-by:
-
Akeem G Abodunrin authored
Intel GPU Hardware prior to Gen11 does not clear EU state during a context switch. This can result in information leakage between contexts. For Gen8 and Gen9, hardware provides a mechanism for fast cleardown of the EU state, by issuing a PIPE_CONTROL with bit 27 set. We can use this in a context batch buffer to explicitly cleardown the state on every context switch. As this workaround is already in place for gen8, we can borrow the code verbatim for Gen9. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> CVE-2019-14615 (backported from commit bc8a76a1) [tyhicks: Backport to 4.4: - Apply patch to i915_bpo driver since it handles gen9 chips - Use (i915_scratch_offset(engine->i915) + 2 * CACHELINE_BYTES) in place of LRC_PPHWSP_SCRATCH_ADDR and PIPE_CONTROL_GLOBAL_GTT_IVB in place of PIPE_CONTROL_STORE_DATA_INDEX since we're missing commit e1237523 ("drm/i915/execlists: Use per-process HWSP as scratch") - Remove unused dev_priv variable - Replace the existing WaClearSlmSpaceAtContextSwitch that was being used for pre-production Kaby Lake] Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Signed-off-by:
-
- 08 Jan, 2020 9 commits
-
-
Connor Kuehl authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1858798 This reverts commit 800d3f56 upstream. This commit introduces a build failure in tools/perf on environments that don't have libunwind installed. [...] builtin-report.c: In function ‘report__setup_sample_type’: builtin-report.c:289:6: error: ‘dwarf_callchain_users’ undeclared (first use in this function) if (dwarf_callchain_users) { ^ [...] The variable 'dwarf_callchain_users' was introduced by eabad8c6 "perf unwind: Do not look just at the global callchain_param.record_mode" which as of now hasn't been backported to stable linux-4.4.y. So revert this commit to fix the build failure. Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Connor Kuehl authored
Since it's missing s390x, check-config will complain that these policies aren't being met, even though they are! So, add an s390x entry to make it happy. Ignore: yes Signed-off-by: -
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1858594 Properties: no-test-build Signed-off-by:
-
Connor Kuehl authored
Ignore: yes Signed-off-by: -
Thadeu Lima de Souza Cascardo authored
Whenever config-check finds an entry like: CONFIG_VFIO mark<ENFORCED>note<LP#1636733> it will consider mark<ENFORCED>note as the option name, as the regexp allows any characters not in the whitespace class (\S). By using a class like [^\s<], that is, not whitespace and not '<', it will be correctly parsed. We could fix the entries that have this problem, but fixing the parser is more robust. Ignore: yes Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
-
Anand Jain authored
CVE-2019-18885 Both btrfs_find_device() and find_device() does the same thing except that the latter does not take the seed device onto account in the device scanning context. We can merge them. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Anand Jain authored
CVE-2019-18885 btrfs_find_device() accepts fs_info as an argument and retrieves fs_devices from fs_info. Instead use fs_devices, so that this function can be used in non-mount (during device scanning) context as well. Signed-off-by:
-
Marcelo Henrique Cerri authored
BugLink: https://bugs.launchpad.net/bugs/1844245 Include a systemd service to simplify the process of loading intel_sgx during the boot if the user decides to do so. Since intel_sgx will only be available in linux-azure, restrict the new service with ConditionVirtualization=microsoft. Signed-off-by:
Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by:
-
- 07 Jan, 2020 8 commits
-
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1858462 Ignore: yes Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1858462Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 1f85e626 ] Backport of commit fdfc5c85 ("tcp: remove empty skb from write queue in error cases") in linux-4.14 stable triggered various bugs. One of them has been fixed in commit ba2ddb43f270 ("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but we still have crashes in some occasions. Root-cause is that when tcp_sendmsg() has allocated a fresh skb and could not append a fragment before being blocked in sk_stream_wait_memory(), tcp_write_xmit() might be called and decide to send this fresh and empty skb. Sending an empty packet is not only silly, it might have caused many issues we had in the past with tp->packets_out being out of sync. Fixes: c65f7f00 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Christoph Paasch <cpaasch@apple.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Cc: Jason Baron <jbaron@akamai.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Faiz Abbas authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 2c92dd20 ] Tuning support in DDR50 speed mode was added in SD Specifications Part1 Physical Layer Specification v3.01. Its not possible to distinguish between v3.00 and v3.01 from the SCR and that is why since commit 4324f6de ("mmc: core: enable CMD19 tuning for DDR50 mode") tuning failures are ignored in DDR50 speed mode. Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this error gets printed during enumeration and also if retune is triggered at any time during operation. Update the printk level to pr_debug so that these errors don't lead to false error reports. Signed-off-by:
Faiz Abbas <faiz_abbas@ti.com> Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.comSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1858462 commit 56144737 upstream. syzbot reported various data-race caused by hrtimer_is_queued() reading timer->state. A READ_ONCE() is required there to silence the warning. Also add the corresponding WRITE_ONCE() when timer->state is set. In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid loading timer->state twice. KCSAN reported these cases: BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0: __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991 __run_hrtimer kernel/time/hrtimer.c:1496 [inline] __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593 __do_softirq+0x115/0x33f kernel/softirq.c:292 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1: tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline] tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225 tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044 tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558 tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717 tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2435 release_sock+0x61/0x160 net/core/sock.c:2951 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0: __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991 __run_hrtimer kernel/time/hrtimer.c:1496 [inline] __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1: __tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265 tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline] tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2435 release_sock+0x61/0x160 net/core/sock.c:2951 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 __sys_sendto+0x21f/0x320 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto net/socket.c:1960 [inline] __x64_sys_sendto+0x89/0xb0 net/socket.c:1960 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ tglx: Added comments ] Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191106174804.74723-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1858462 commit bbab7ef2 upstream. This code reads two global variables without protection of a lock. We need READ_ONCE()/WRITE_ONCE() pairs to avoid load/store-tearing and better document the intent. KCSAN reported : BUG: KCSAN: data-race in icmp_global_allow / icmp_global_allow read to 0xffffffff861a8014 of 4 bytes by task 11201 on cpu 0: icmp_global_allow+0x36/0x1b0 net/ipv4/icmp.c:254 icmpv6_global_allow net/ipv6/icmp.c:184 [inline] icmpv6_global_allow net/ipv6/icmp.c:179 [inline] icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514 icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43 ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640 dst_link_failure include/net/dst.h:419 [inline] vti_xmit net/ipv4/ip_vti.c:243 [inline] vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279 __netdev_start_xmit include/linux/netdevice.h:4420 [inline] netdev_start_xmit include/linux/netdevice.h:4434 [inline] xmit_one net/core/dev.c:3280 [inline] dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296 __dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873 dev_queue_xmit+0x21/0x30 net/core/dev.c:3906 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 write to 0xffffffff861a8014 of 4 bytes by task 11183 on cpu 1: icmp_global_allow+0x174/0x1b0 net/ipv4/icmp.c:272 icmpv6_global_allow net/ipv6/icmp.c:184 [inline] icmpv6_global_allow net/ipv6/icmp.c:179 [inline] icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514 icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43 ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640 dst_link_failure include/net/dst.h:419 [inline] vti_xmit net/ipv4/ip_vti.c:243 [inline] vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279 __netdev_start_xmit include/linux/netdevice.h:4420 [inline] netdev_start_xmit include/linux/netdevice.h:4434 [inline] xmit_one net/core/dev.c:3280 [inline] dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296 __dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873 dev_queue_xmit+0x21/0x30 net/core/dev.c:3906 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 4cdf507d ("icmp: add a global rate limitation") Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1858462 commit 56042858 upstream. syzbot is kind enough to remind us we need to call skb_may_pull() BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline] nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512 nf_hook include/linux/netfilter.h:260 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline] br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830 __netif_receive_skb_one_core net/core/dev.c:4927 [inline] __netif_receive_skb net/core/dev.c:5043 [inline] process_backlog+0x610/0x13c0 net/core/dev.c:5874 napi_poll net/core/dev.c:6311 [inline] net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379 __do_softirq+0x4a1/0x83a kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091 </IRQ> do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline] __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825 packet_snd net/packet/af_packet.c:2959 [inline] packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a679 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679 RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4 R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x306/0xa10 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244 packet_alloc_skb net/packet/af_packet.c:2807 [inline] packet_snd net/packet/af_packet.c:2902 [inline] packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c4e70a87 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1858462 commit 5c9934b6 upstream. We got another syzbot report [1] that tells us we must use write_lock_irq()/write_unlock_irq() to avoid possible deadlock. [1] WARNING: inconsistent lock state 5.5.0-rc1-syzkaller #0 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage. syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes: ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 {HARDIRQ-ON-W} state was registered at: lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319 sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657 tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489 tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585 tiocsetd drivers/tty/tty_io.c:2337 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597 vfs_ioctl fs/ioctl.c:47 [inline] file_ioctl fs/ioctl.c:545 [inline] do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732 ksys_ioctl+0xab/0xd0 fs/ioctl.c:749 __do_sys_ioctl fs/ioctl.c:756 [inline] __se_sys_ioctl fs/ioctl.c:754 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 3946 hardirqs last enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline] hardirqs last enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199 hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42 softirqs last enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline] softirqs last enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222 softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline] softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(disc_data_lock); <Interrupt> lock(disc_data_lock); *** DEADLOCK *** 5 locks held by syz-executor826/9605: #0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 #1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116 #3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823 #4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288 stack backtrace: CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101 valid_state kernel/locking/lockdep.c:3112 [inline] mark_lock_irq kernel/locking/lockdep.c:3309 [inline] mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666 mark_usage kernel/locking/lockdep.c:3554 [inline] __lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_read_lock include/linux/rwlock_api_smp.h:149 [inline] _raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223 sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402 tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536 tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50 tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387 uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104 serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761 serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline] serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850 serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149 handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189 handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206 handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830 generic_handle_irq_desc include/linux/irqdesc.h:156 [inline] do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607 </IRQ> RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline] RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579 Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7 RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7 RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000 RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899 R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138 R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000 mutex_optimistic_spin kernel/locking/mutex.c:673 [inline] __mutex_lock_common kernel/locking/mutex.c:962 [inline] __mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121 tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8e7/0x2ef0 kernel/exit.c:797 do_group_exit+0x135/0x360 kernel/exit.c:895 __do_sys_exit_group kernel/exit.c:906 [inline] __se_sys_exit_group kernel/exit.c:904 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:904 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x43fef8 Code: Bad RIP value. RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Fixes: 6e4e2f81 ("6pack,mkiss: fix lock inconsistency") Signed-off-by:
-
