* clk-qcom: (87 commits)
  clk: qcom: Fix SM_GPUCC_8450 dependencies
  clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
  clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
  clk: qcom: gcc-ipq5018: change some variable static
  clk: qcom: gcc-ipq4019: add missing networking resets
  dt-bindings: clock: qcom: ipq4019: add missing networking resets
  clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
  dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
  clk: qcom: gcc-qdu1000: Update the RCGs ops
  clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
  clk: qcom: gcc-qdu1000: Add support for GDSCs
  clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
  clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
  clk: qcom: gcc-qdu1000: Fix clkref clocks handling
  clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
  dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
  clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
  clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
  clk: qcom: ipq5332: drop the mem noc clocks
  clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  ...

 - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
 - Remove non-OF mmp clk drivers
 - Move number of clks from DT headers to drivers

* clk-imx:
  clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
  clk: imx: pll14xx: align pdiv with reference manual
  clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
  clk: imx25: make __mx25_clocks_init return void
  clk: imx25: print silicon revision during init
  dt-bindings: clocks: imx8mp: make sai4 a dummy clock
  clk: imx8mp: fix sai4 clock
  clk: imx: imx8ulp: update SPLL2 type
  clk: imx: pllv4: Fix SPLL2 MULT range
  clk: imx: imx8: add audio clock mux driver
  dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
  clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
  clk: imx: clk-gpr-mux: Simplify .determine_rate()
  clk: imx: Add 519.75MHz frequency support for imx9 pll
  clk: imx93: Add PDM IPG clk
  dt-bindings: clock: imx93: Add PDM IPG clk

* clk-samsung:
  dt-bindings: clock: samsung: remove define with number of clocks
  clk: samsung: exynoautov9: do not define number of clocks in bindings
  clk: samsung: exynos850: do not define number of clocks in bindings
  clk: samsung: exynos7885: do not define number of clocks in bindings
  clk: samsung: exynos5433: do not define number of clocks in bindings
  clk: samsung: exynos5420: do not define number of clocks in bindings
  clk: samsung: exynos5410: do not define number of clocks in bindings
  clk: samsung: exynos5260: do not define number of clocks in bindings
  clk: samsung: exynos5250: do not define number of clocks in bindings
  clk: samsung: exynos4: do not define number of clocks in bindings
  clk: samsung: exynos3250: do not define number of clocks in bindings

* clk-annotate:
  clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
  clk: Annotate struct clk_hw_onecell_data with __counted_by

* clk-marvell:
  clk: pxa910: Move number of clocks to driver source
  clk: pxa1928: Move number of clocks to driver source
  clk: pxa168: Move number of clocks to driver source
  clk: mmp2: Move number of clocks to driver source
  clk: mmp: Remove old non-OF clock drivers

* clk-lmk:
  clk: lmk04832: Support using PLL1_LD as SPI readback pin
  clk: lmk04832: Don't disable vco clock on probe fail
  clk: lmk04832: Set missing parent_names for output clocks

Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and 'clk-rockchip' into clk-next

 - Add Versa3 clk generator to support 48KHz playback/record with audio
   codec on RZ/G2L SMARC EVK
 - Introduce kstrdup_and_replace() and use it

* clk-versa:
  clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
  clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
  clk: versaclock3: Switch to use i2c_driver's probe callback
  clk: Add support for versa3 clock driver
  dt-bindings: clock: Add Renesas versa3 clock generator bindings

* clk-strdup:
  clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  lib/string_helpers: Add kstrdup_and_replace() helper

* clk-amlogic: (22 commits)
  dt-bindings: soc: amlogic: document System Control registers
  dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
  dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
  clk: meson: axg-audio: move bindings include to main driver
  clk: meson: meson8b: move bindings include to main driver
  clk: meson: a1: move bindings include to main driver
  clk: meson: eeclk: move bindings include to main driver
  clk: meson: aoclk: move bindings include to main driver
  dt-bindings: clk: axg-audio-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
  dt-bindings: clk: meson8b-clkc: expose all clock ids
  dt-bindings: clk: g12a-aoclkc: expose all clock ids
  dt-bindings: clk: g12a-clks: expose all clock ids
  dt-bindings: clk: axg-clkc: expose all clock ids
  dt-bindings: clk: gxbb-clkc: expose all clock ids
  clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
  ...

* clk-allwinner:
  clk: sunxi-ng: nkm: Prefer current parent rate
  clk: sunxi-ng: a64: select closest rate for pll-video0
  clk: sunxi-ng: div: Support finding closest rate
  clk: sunxi-ng: mux: Support finding closest rate
  clk: sunxi-ng: nkm: Support finding closest rate
  clk: sunxi-ng: nm: Support finding closest rate
  clk: sunxi-ng: Add helper function to find closest rate
  clk: sunxi-ng: Add feature to find closest rate
  clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
  clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
  clk: sunxi-ng: nkm: Use correct parameter name for parent HW
  clk: sunxi-ng: Modify mismatched function name
  clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()

* clk-rockchip:
  clk: rockchip: rv1126: Add PD_VO clock tree
  clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
  clk: rockchip: rk3568: Add PLL rate for 101MHz

Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and 'clk-cleanup' into clk-next

 - Remove OXNAS clk driver

* clk-bindings:
  dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml
  dt-bindings: clock: xlnx,versal-clk: drop select:false
  dt-bindings: clock: versal: Add versal-net compatible string
  dt-bindings: clock: ast2600: Add I3C and MAC reset definitions
  dt-bindings: arm: hisilicon,cpuctrl: Merge "hisilicon,hix5hd2-clock" into parent binding

* clk-starfive:
  reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support
  clk: starfive: Simplify .determine_rate()
  clk: starfive: Add StarFive JH7110 Video-Output clock driver
  clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver
  clk: starfive: Add StarFive JH7110 System-Top-Group clock driver
  clk: starfive: jh7110-sys: Add PLL clocks source from DTS
  clk: starfive: Add StarFive JH7110 PLL clock driver
  dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
  dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
  dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
  dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs
  dt-bindings: soc: starfive: Add StarFive syscon module
  dt-bindings: clock: Add StarFive JH7110 PLL clock generator

* clk-rm:
  dt-bindings: clk: oxnas: remove obsolete bindings
  clk: oxnas: remove obsolete clock driver

* clk-renesas:
  clk: renesas: rcar-gen3: Add ADG clocks
  clk: renesas: r8a77965: Add 3DGE and ZG support
  clk: renesas: r8a7796: Add 3DGE and ZG support
  clk: renesas: r8a7795: Add 3DGE and ZG support
  clk: renesas: emev2: Remove obsolete clkdev registration
  clk: renesas: r9a07g043: Add MTU3a clock and reset entry
  clk: renesas: rzg2l: Simplify .determine_rate()
  clk: renesas: r9a09g011: Add CSI related clocks
  clk: renesas: r8a774b1: Add 3DGE and ZG support
  clk: renesas: r8a774e1: Add 3DGE and ZG support
  clk: renesas: r8a774a1: Add 3DGE and ZG support
  clk: renesas: rcar-gen3: Add support for ZG clock

* clk-cleanup:
  clk: mvebu: Convert to devm_platform_ioremap_resource()
  clk: nuvoton: Convert to devm_platform_ioremap_resource()
  clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
  clk: ti: Use devm_platform_get_and_ioremap_resource()
  clk: mediatek: Convert to devm_platform_ioremap_resource()
  clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
  clk: gemini: Convert to devm_platform_ioremap_resource()
  clk: fsl-sai: Convert to devm_platform_ioremap_resource()
  clk: bm1880: Convert to devm_platform_ioremap_resource()
  clk: axm5516: Convert to devm_platform_ioremap_resource()
  clk: actions: Convert to devm_platform_ioremap_resource()
  clk: cdce925: Remove redundant of_match_ptr()
  drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
  clk: Explicitly include correct DT includes

CONFIG_SM_GCC_8450 depends on ARM64 but it is selected by
CONFIG_SM_GPUCC_8450, which can be selected on ARM, resulting in a
Kconfig warning.

WARNING: unmet direct dependencies detected for SM_GCC_8450
  Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
  Selected by [y]:
  - SM_GPUCC_8450 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]

Add the same dependencies to CONFIG_SM_GPUCC_8450 to resolve the
warning.

Fixes: 728692d4 ("clk: qcom: Add support for SM8450 GPUCC")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230829-fix-sm_gpucc_8550-deps-v1-1-d751f6cd35b2@kernel.orgReviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The PLL1_PD pin (a.k.a. STATUS_LD1) can be used as SPI readback pin. Make
this possible.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-3-mike.looijmans@topic.nlReviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The probe() method never calls clk_prepare_enable(), so it should not
call clk_disable_unprepare() for the vco.clk in the error path. Fixes
a "lmk-vco already disabled" BUG when probe fails.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-2-mike.looijmans@topic.nlReviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

lmk04832_register_clkout forgot to fill in the parent_names, resulting
in the error message "Must specify parents if num_parents > 0".
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-1-mike.looijmans@topic.nlReviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-13-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-12-frank.li@vivo.comAcked-by: Jacky Huang <ychuang3@nuvoton.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-11-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-10-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-9-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-7-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-6-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-5-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-4-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-3-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-2-frank.li@vivo.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230808125341.4073115-1-ruanjinjie@huawei.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.

Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-4-f9271bd7eaa5@skole.hrAcked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.

Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-3-f9271bd7eaa5@skole.hrAcked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.

Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-2-f9271bd7eaa5@skole.hrAcked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.

Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-1-f9271bd7eaa5@skole.hrAcked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

There are no MMP2, PXA168 or PXA910 boards still using board files which
would use these drivers, so remove them.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230804-drop-old-mmp-clk-v1-1-0c07db6cee90@skole.hrSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct spmi_pmic_div_clk_cc.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230817202941.never.657-kees@kernel.orgReviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Takao Orito <orito.takao@socionext.com>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-sunxi@lists.linux.dev
Cc: linux-phy@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.orgReviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

 - Support for the Global Clock Controller in IPQ5018 is added.
 - The SMD RPM driver is cleaned up, with interconnect bus clocks moved
   out to the interconnect drivers. Due to being tangled with the
   related interconnect updates, the topic branch with interconnect
   patches was merged in as well.
 - Various bugs in PM runtime integration is fixes across many platforms.
 - The MSM8996 core bus framework gains support for MSM8996 Pro.
 - MDM9615 is transitioned to parent_hw and parent_data, with related
   cleanups. With this the cxo proxy clock is dropped from the driver.
   And LCC support for MDM9615 is merged into the MSM8960 driver, to
   avoid duplication.
 - Network-related resets are added on IPQ4019
 - A couple of missing USB-related clocks are added for IPQ9574
 - The missing gpll0_sleep_clk_src is added to MSM8917 global clock
   controller
 - A few minor fixes for MSM8998 global clock controller.
 - In the QDU1000 global clock controller GDSCs, clkrefs, and GPLL1 are
   added, while PCIe pipe clock, SDCC rcg ops are corrected.
 - Missing GDSCs are added to SC8280XP global clock controller driver,
   flags for existing GDSCs are corrected, by enabling retention and
   dropping the always-on flags. Retention is also enabled for the
   display clock controller GDSCs.
 - SDCC apps_clk_src is marked CLK_OPS_PARENT_ENABLE to fix issues with
   missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while
   sm8450 is corrected to use floor ops.
 - SM6350 GPU clock controller clock supplies are corrected.
 - Unwanted clocks from the IPQ5332 GCC are dropped.
 - The missing OXILICX GDSC is added to MSM8226 GCC.
 - The delay in the reset controller is transitioned to fsleep() to
   invoke the appropriate sleep method depending on duration.
 - The SM83550 Video clock controller is extended to support SC8280XP.

* tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (86 commits)
  clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
  clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
  clk: qcom: gcc-ipq5018: change some variable static
  clk: qcom: gcc-ipq4019: add missing networking resets
  dt-bindings: clock: qcom: ipq4019: add missing networking resets
  clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
  dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
  clk: qcom: gcc-qdu1000: Update the RCGs ops
  clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
  clk: qcom: gcc-qdu1000: Add support for GDSCs
  clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
  clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
  clk: qcom: gcc-qdu1000: Fix clkref clocks handling
  clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
  dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
  clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
  clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
  clk: qcom: ipq5332: drop the mem noc clocks
  clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
  ...

The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230721070019.96627-3-biju.das.jz@bp.renesas.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230721070019.96627-2-biju.das.jz@bp.renesas.comReviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'samsung-clk-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung

Pull Samsung SoC clock drivers changes from Krzysztof Kozlowski:

Remove from the bindings the #defines with number of clocks supported by
each clock controller driver.  This number can vary, e.g. when we
implement more clocks in the driver.  Having the number in the bindings
prevents changing it.  Instead, this should be just a #define inside the
driver.

* tag 'samsung-clk-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  dt-bindings: clock: samsung: remove define with number of clocks
  clk: samsung: exynoautov9: do not define number of clocks in bindings
  clk: samsung: exynos850: do not define number of clocks in bindings
  clk: samsung: exynos7885: do not define number of clocks in bindings
  clk: samsung: exynos5433: do not define number of clocks in bindings
  clk: samsung: exynos5420: do not define number of clocks in bindings
  clk: samsung: exynos5410: do not define number of clocks in bindings
  clk: samsung: exynos5260: do not define number of clocks in bindings
  clk: samsung: exynos5250: do not define number of clocks in bindings
  clk: samsung: exynos4: do not define number of clocks in bindings
  clk: samsung: exynos3250: do not define number of clocks in bindings

Merge tag 'clk-imx-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx

Pull i.MX clk driver updates from Abel Vesa:

 - Add the PDM IPC clock for i.MX93
 - Add 519.75MHz frequency support for i.MX9 PLL
 - Simplify the .determine_rate() for GPR mux
 - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource
 - Add the audio mux clock to i.MX8
 - Fix the SPLL2 MULT range for PLLv4
 - Update the SPLL2 type in i.MX8ULP
 - Fix the SAI4 clock on i.MX8MP
 - Add silicon revision print for i.MX25 on clocks init
 - Drop the return value from __mx25_clocks_init
 - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
 - Drop restrictions for PLL14xx and fix its max prediv value
 - Drop the 393216000 and 361267200 from PLL14xx rate table to allow
   glitch free switching

* tag 'clk-imx-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
  clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
  clk: imx: pll14xx: align pdiv with reference manual
  clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
  clk: imx25: make __mx25_clocks_init return void
  clk: imx25: print silicon revision during init
  dt-bindings: clocks: imx8mp: make sai4 a dummy clock
  clk: imx8mp: fix sai4 clock
  clk: imx: imx8ulp: update SPLL2 type
  clk: imx: pllv4: Fix SPLL2 MULT range
  clk: imx: imx8: add audio clock mux driver
  dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
  clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
  clk: imx: clk-gpr-mux: Simplify .determine_rate()
  clk: imx: Add 519.75MHz frequency support for imx9 pll
  clk: imx93: Add PDM IPG clk
  dt-bindings: clock: imx93: Add PDM IPG clk

Merge tag 'v6.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip

Pull Rockchip clk driver updates from Heiko Stuebner:

 - PLL rates for rk3568 and the display clock tree for rv1126 which wasn't present before

* tag 'v6.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: rv1126: Add PD_VO clock tree
  clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
  clk: rockchip: rk3568: Add PLL rate for 101MHz

Merge tag 'renesas-clk-for-v6.6-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull another Renesas clk driver update from Geert Uytterhoeven:

 - Add Audio Clock Generator (ADG) clocks on R-Car Gen3 and RZ/G2 SoCs

* tag 'renesas-clk-for-v6.6-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: rcar-gen3: Add ADG clocks

On all supported SoCs to date, the PCNoC (a.k.a CNoC_PERIPH) clock must
be always-on as long as the APSS is online and only has to run
at 19.2 MHz. Define it to be as such in the ACTIVE domain.

Some SoCs use that clock for bus scaling, while others just need it for
reaching the hardware. This commit will hurt neither.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-2-452dd36d11d7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Some clocks, at least PCNoC (a.k.a CNoC_PERIPH) need to be always on,
at least on the ACTIVE side, regardless of whether they're used for bus
scaling or not.

Introduce a new macro to preset non-INT_MAX rates and clk flags to make
it easy and work implicitly through the CCF.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-1-452dd36d11d7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

lpass_axim_clk_src and lpass_sway_clk_src are only
used in gcc-ipq5018.c now, change them to static.

Fixes: e3fdbef1 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230816080113.1222352-1-yangyingliang@huawei.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

IPQ4019 has more networking related resets that will be required for future
wired networking support, so lets add them.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20230814104119.96858-2-robert.marko@sartura.hrSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add bindings for the missing networking resets found in IPQ4019 GCC.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814104119.96858-1-robert.marko@sartura.hrSigned-off-by: Bjorn Andersson <andersson@kernel.org>

R-Car Sound needs to enable "ADG" on RMSTPCR9/SMSTPCR9 bit 22 to use
clk_i which came from the internal S0D4 or ZA2 clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de> # R-Car M3-N
Tested-by: Patrick Keil <patrick.keil@conti-engineering.com> # R-Car M3-N
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87pm47prox.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87o7jrpros.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87mszbpron.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87leevproh.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87jzufprod.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87il9zpro8.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h6pjpro4.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87fs53prny.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87edknprnt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>