SH never really supported a.out, so this was all just copied over blindly
from x86 way back when. As we don't reference linux/a.out.h anywhere in
the tree, these can now safely be killed off.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

We haven't called in to __do_IRQ() in a long time, so it seems like a
reasonable time to switch this on by default.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Needed for fixing up the __raw_spin_is_contended() reference which
results in a build error.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently the NUMA node data isn't saved on kexec. This implements a
simple arch_crash_save_vmcoreinfo() for saving off the relevant data.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

SH-X2 extended mode TLB allows for toggling of the exec bit, so make
sure we are using the right protection bits for module space there
also.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

We should be calling in to the lib/bug.c module helpers, fix that up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds some preliminary docbook bits for SH, tying in to the few
interfaces that are exposed and that have adequate kerneldoc comments.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

These were completely unparseable, so fix them up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

We can simply wrap in to the dev_set/get_drvdata(), there's no reason
to track an extra level of private data on top of the struct device.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

These were completely inconsistent. Clean these up to take a maple_driver
pointer directly for consistency.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Have a single probe function instead of a probe and a connect function.
Also tidy a comment.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Allow the removal (and subsequent reinsertion) of the maple_keyb (maple
keyboard) driver by adding a working removal function.

Also tidy long lines.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Removed duplicated include <linux/irq.h> in
arch/sh/boards/mach-se/7343/irq.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Removed duplicated include <linux/delay.h> in
arch/sh/boards/board-ap325rxa.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The following build error was caused by an obvious typo:

<--  snip  -->

...
  LD      arch/sh/mm/built-in.o
make[2]: *** No rule to make target `arch/sh/boards/board-shmin..o', needed by `arch/sh/boards/built-in.o'.  Stop.

<--  snip  -->
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Commit f15cbe6f
(sh: migrate to arch/sh/include/) moved KBUILD_CFLAGS
(which is used by LIBGCC) below LIBGCC, causing build
errors like the following:

<--  snip  -->

...
  LD      .tmp_vmlinux1
arch/sh/kernel/built-in.o: In function `module_clk_recalc':
clock-sh4.c:(.text+0x80f0): undefined reference to `__udivsi3_i4i'
...
make[1]: *** [.tmp_vmlinux1] Error 1

<--  snip  -->
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This ended up causing build breakage on O= builds, as reported by Adrian:

<--  snip  -->

...
  CC      init/main.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13:
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27:
error: asm/machtypes.h: No such file or directory
make[2]: *** [init/main.o] Error 1

<--  snip  -->

So we simply move machtypes.h back to its original place. asm-offsets.h is
still generated there regardless, until such a time that we find a better place
to stash auto-generated files.
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

asm/se.h moved to mach-se/mach/se.h, update the path. We could use
mach/se.h here also, but it's preferable to be explicit when there's
only a single supported mach-type.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently this was always being set to AUDIT_ARCH_SH, which assumes
big endian. Fix this up so that the architecture actually reflects
what we're running on.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This follows the changes in commits:

7d6d637d
4f72c427

on powerpc. Adding in TIF_NOTIFY_RESUME, and cleaning up the syscall
tracing to be more generic. This is an incremental step to turning
on tracehook, as well as unifying more of the ptrace and signal code
across the 32/64 split.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This converts the single stepping done by sh/sh64 ptrace implementations
to use the generic user_enable/disable_single_step(), and subsequently
rips out a lot of ptrace request cases that are now handled generically.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This hooks up the seccomp thread flag and associated callback from the
syscall tracer.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

A quick cut and paste from other architectures to allow SH
to parse the elfcorehdr command line argument which is required
for both is_kdump_kernel() and vmcore to function.
(the former is as yet unused on SH).

Tested compilation only
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings
  [MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
  [MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()
  [MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default
  [MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions
  [MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses
  [MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10
  [MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages
  [MTD] [NAND] diskonchip.c fix sparse endian warnings
  [MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h
  [JFFS2] Fix allocation of summary buffer
  Fix rename of at91_nand -> atmel_nand
  [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
  [MTD] MTD_DEBUG always does compile-time typechecks
  [MTD] DataFlash: bugfix, binary page sizes now handled
  [MTD] [NAND] fsl_elbc_nand.c: fix printk warning
  [MTD] [NAND] nandsim: support random page read command
  [MTD] [NAND] fix subpage read for small page NAND

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] pass struct path * to do_add_mount()
  [PATCH] switch mtd and dm-table to lookup_bdev()
  [patch 3/4] vfs: remove unused nameidata argument of may_create()
  [PATCH] devpts: switch to IDA
  [PATCH 2/2] proc: switch inode number allocation to IDA
  [PATCH 1/2] proc: fix inode number bogorithmetic
  [PATCH] fix bdev leak in block_dev.c do_open()
  [PATCH] fix races and leaks in vfs_quota_on() users
  [PATCH] clean dup2() up a bit
  [PATCH] merge locate_fd() and get_unused_fd()
  [PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL
  Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree

* 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
  [PATCH] Fix the kernel panic of audit_filter_task when key field is set
  Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
  kernel/audit.c control character detection is off-by-one
  [PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  au1xmmc: raise segment size limit.
  mmc_block: use proper sg iterators
  mmc: properly iterate over sg list in debug check
  mmc_test: Revert "mmc_test: test oversized sg lists"
  sdhci: check correct return value
  sdhci: disable DMA for req, not completely
  sdhci: handle bug in JMB38x for sizes < 4 bytes

* 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: TI bq24022 Li-Ion Charger driver
  regulator: maintainers - add maintainers for regulator framework.
  regulator: documentation - ABI
  regulator: documentation - machine
  regulator: documentation - regulator driver
  regulator: documentation - consumer interface
  regulator: documentation - overview
  regulator: core kbuild files
  regulator: regulator test harness
  regulator: add support for fixed regulators.
  regulator: regulator framework core
  regulator: fixed regulator interface
  regulator: machine driver interface
  regulator: regulator driver interface
  regulator: consumer device interface

Merge branch 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: /proc/mounts should show what it can

* git://git.infradead.org/battery-2.6:
  power_supply: Sharp SL-6000 (tosa) batteries support
  power_supply: fix up CHARGE_COUNTER output to be more precise
  power_supply: add CHARGE_COUNTER property and olpc_battery support for it
  power_supply: bump EC version check that we refuse to run with in olpc_battery
  power_supply: cleanup of the OLPC battery driver
  power_supply: add eeprom dump file to olpc_battery's sysfs
  power_supply: Support serial number in olpc_battery

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits)
  mm/hugetlb.c must #include <asm/io.h>
  video: Fix up hp6xx driver build regressions.
  sh: defconfig updates.
  sh: Kill off stray mach-rsk7203 reference.
  serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.
  sh: Move out individual boards without mach groups.
  sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h.
  sh: Allow SH-3 and SH-5 to use common headers.
  sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
  sh/maple: clean maple bus code
  sh: More header path fixups for mach dir refactoring.
  sh: Move out the solution engine headers to arch/sh/include/mach-se/
  sh: I2C fix for AP325RXA and Migo-R
  sh: Shuffle the board directories in to mach groups.
  sh: dma-sh: Fix up dreamcast dma.h mach path.
  sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
  sh: Add ARCH_DEFCONFIG entries for sh and sh64.
  sh: Fix compile error of Solution Engine
  sh: Proper __put_user_asm() size mismatch fix.
  sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic, x86: fix add iommu_num_pages helper function
  x86: remove stray <6> in BogoMIPS printk
  x86: move dma32_reserve_bootmem() after reserve_crashkernel()

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] qeth: avoid use of include/asm-s390
  [S390] dont use kthread for smp_rescan_cpus().
  [S390] virtio console: fix section mismatch warning.
  [S390] cio: Include linux/string.h in schid.h.
  [S390] qdio: fix section mismatch bug.
  [S390] stp: fix section mismatch warning.
  [S390] Remove diag 0x260 call from memory detection.
  [S390] qdio: make sure qdr is aligned to page size
  [S390] Add support for memory hot-remove.
  [S390] Wire up new syscalls.
  [S390] cio: Memory allocation for idset changed.
  [S390] qeth: preallocated qeth header for hiper socket
  [S390] Optimize storage key operations for anon pages
  [S390] nohz/sclp: disable timer on synchronous waits.
  [S390] ipl: Reboot from alternate device does not work when booting from file
  [S390] dasd: Add support for enhanced VM UID
  [S390] Remove last P390 trace.

Raise the DMA block size limit from 2048 bytes to the maximum supported
by the DMA controllers on the chip (64KB on Au1100, 4MB on Au1200).

This gives a very small performance boost and apparently fixes an oops
when MMC-DMA and network traffic are active at the same time.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

This reverts commit 48b5352e. Oversized
sg lists are not allowed anymore, and the core even checks for them in
debug mode, so this test is entirely incorrect.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Fix a copy-and-paste error.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>