- 16 Apr, 2013 3 commits
-
-
Fabio Estevam authored
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Jay Cliburn <jcliburn@gmail.com> Signed-off-by:
-
Fabio Estevam authored
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
- 15 Apr, 2013 8 commits
-
-
David S. Miller authored
Vlad Yasevich says: ==================== Current dev_[uc|mc]_addr_sync() API currently correctly syncs the addresses to the first device. Any subsequent calls to sync will not do anything since the synched variable will be set. This variable is used as an optimization to skip over addresses that have been synched. There are some devices (ex: team) that attempt to do the above. There is other work in progress that needs to above to work corretly. The short series introduces dev_[uc|mc]_addr_synch_multiple() that allows multiple calls to sync to multiple different devices. Original API is left alone and still has the limitation. ==================== Signed-off-by: -
Vlad Yasevich authored
Team drivers attempts to sync addresses to each of the port devices; however, the current api doesn't really perform the sync for any device after the first one. Switch to using the new api that will actually sync the addresses to all ports. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
The current implementation of dev_uc_sync/unsync() assumes that there is a strict 1-to-1 relationship between the source and destination of the sync. In other words, once an address has been synced to a destination device, it will not be synced to any other device through the sync API. However, there are some virtual devices that aggreate a number of lower devices and need to sync addresses to all of them. The current API falls short there. This patch introduces a new dev_uc_sync_multiple() api that can be called in the above circumstances and allows sync to work for every invocation. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Daniel Borkmann authored
Since dead only holds two states (0,1), make it a bool instead of a 'char', which is more appropriate for its purpose. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
There is actually no need to keep this member in the structure, because after init it's always 1 anyway, thus always kfree called. This seems to be an ancient leftover from the very initial implementation from 2.5 times. Only in case the initialization of an association fails, we leave base.malloced as 0, but we nevertheless kfree it in the error path in sctp_association_new(). Signed-off-by:
-
Denis Kirjanov authored
The first backtrace appears on tx path with DMA mapping operations debug enabled. [ 345.637919] ------------[ cut here ]------------ [ 345.637971] WARNING: at lib/dma-debug.c:937 check_unmap+0x4df/0x910() [ 345.637977] Hardware name: System Name [ 345.637987] sis900 0000:00:01.1: DMA-API: device driver failed to check map error[device address=0x000000000d4aed02] [si ze=60 bytes] [mapped as single] [ 345.637993] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 [ 345.638022] Pid: 0, comm: swapper Not tainted 3.9.0-rc6+ #4 [ 345.638028] Call Trace: [ 345.638042] [<c122097f>] ? check_unmap+0x4df/0x910 [ 345.638059] [<c102b19c>] warn_slowpath_common+0x7c/0xa0 [ 345.638070] [<c122097f>] ? check_unmap+0x4df/0x910 [ 345.638081] [<c102b23e>] warn_slowpath_fmt+0x2e/0x30 [ 345.638092] [<c122097f>] check_unmap+0x4df/0x910 [ 345.638107] [<c100bfeb>] ? save_stack_trace+0x2b/0x50 [ 345.638120] [<c107238e>] ? mark_lock+0x31e/0x5d0 [ 345.638132] [<c1072b2c>] ? __lock_acquire+0x4ec/0x7d0 [ 345.638143] [<c1220f6d>] debug_dma_unmap_page+0x6d/0x80 [ 345.638166] [<cf834dec>] sis900_interrupt+0x49c/0x860 [sis900] [ 345.638195] [<c1094b73>] handle_irq_event_percpu+0x43/0x1c0 [ 345.638206] [<c1094d1e>] ? handle_irq_event+0x2e/0x60 [ 345.638217] [<c1094d27>] handle_irq_event+0x37/0x60 [ 345.638235] [<c10973f0>] ? irq_set_chip_data+0x40/0x40 [ 345.638246] [<c1097442>] handle_level_irq+0x52/0xa0 [ 345.638251] <IRQ> [<c1003629>] ? do_IRQ+0x39/0xa0 [ 345.638293] [<c1484631>] ? common_interrupt+0x31/0x36 [ 345.638347] [<d08c2c52>] ? br_flood_forward+0x12/0x20 [bridge] [ 345.638364] [<d08c2d40>] ? br_dev_queue_push_xmit+0x60/0x60 [bridge] [ 345.638381] [<d08c3b2b>] ? br_handle_frame_finish+0x25b/0x280 [bridge] [ 345.638399] [<d08c3ce3>] ? br_handle_frame+0x193/0x290 [bridge] [ 345.638416] [<d08c3b50>] ? br_handle_frame_finish+0x280/0x280 [bridge] [ 345.638431] [<c13b3c87>] ? __netif_receive_skb_core+0x1d7/0x710 [ 345.638442] [<c13b3b19>] ? __netif_receive_skb_core+0x69/0x710 [ 345.638454] [<c13b41e1>] ? __netif_receive_skb+0x21/0x70 [ 345.638464] [<c13b42b5>] ? process_backlog+0x85/0x130 [ 345.638476] [<c13b4bbb>] ? net_rx_action+0xfb/0x1d0 [ 345.638497] [<c1032768>] ? __do_softirq+0xa8/0x1f0 [ 345.638527] [<c147daad>] ? _raw_spin_unlock+0x1d/0x20 [ 345.638538] [<c10038c0>] ? handle_irq+0x20/0xd0 [ 345.638550] [<c1032f27>] ? irq_exit+0x97/0xa0 [ 345.638560] [<c1003632>] ? do_IRQ+0x42/0xa0 [ 345.638580] [<c104d003>] ? hrtimer_start+0x23/0x30 [ 345.638580] [<c1484631>] ? common_interrupt+0x31/0x36 [ 345.638580] [<c1008703>] ? default_idle+0x33/0xc0 [ 345.638580] [<c10086ac>] ? cpu_idle+0x4c/0x70 [ 345.638580] [<c14787e0>] ? rest_init+0xa0/0xb0 [ 345.638580] [<c1478740>] ? reciprocal_value+0x50/0x50 [ 345.638580] [<c16b5bcf>] ? start_kernel+0x28f/0x320 [ 345.638580] [<c16b54e0>] ? repair_env_string+0x60/0x60 [ 345.638580] [<c16b5269>] ? i386_start_kernel+0x39/0xa0 [ 345.638580] ---[ end trace a244264b69b8a7ae ]--- [ 345.638580] Mapped at: [ 345.638580] [<c1221c65>] debug_dma_map_page+0x65/0x110 [ 345.638580] [<cf8355a9>] sis900_start_xmit+0x129/0x210 [sis900] [ 345.638580] [<c13b2527>] dev_hard_start_xmit+0x1b7/0x530 [ 345.638580] [<c13cc32e>] sch_direct_xmit+0x8e/0x280 [ 345.638580] [<c13b4e39>] dev_queue_xmit+0x1a9/0x5b0 Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
Nicolas Ferre authored
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Original-idea-by: <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Mike Rapoport authored
The multicast and broadcast packets may have RTCF_LOCAL set in rt_flags and therefore will be sent out bypassing encapsulation. This breaks delivery of packets sent to the vxlan multicast group. Disabling encapsulation bypass for multicasts and broadcasts fixes the issue. Signed-off-by:
Mike Rapoport <mike.rapoport@ravellosystems.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Sridhar Samudrala <sri@us.ibm.com> Tested-by:
-
- 14 Apr, 2013 6 commits
-
-
Daniel Borkmann authored
Commit 10b96f73 (``tcp_memcontrol: remove a redundant statement in tcp_destroy_cgroup()'') says ``We read the value but make no use of it.'', but forgot to remove the variable declaration as well. This was a follow-up commit of 3f134619 (``memcg: decrement static keys at real destroy time'') that removed the read of variable 'val'. This fixes therefore: CC net/ipv4/tcp_memcontrol.o net/ipv4/tcp_memcontrol.c: In function ‘tcp_destroy_cgroup’: net/ipv4/tcp_memcontrol.c:67:6: warning: unused variable ‘val’ [-Wunused-variable] Signed-off-by:
-
Daniel Borkmann authored
Currently, sock_tx_timestamp() always returns 0. The comment that describes the sock_tx_timestamp() function wrongly says that it returns an error when an invalid argument is passed (from commit 20d49473, ``net: socket infrastructure for SO_TIMESTAMPING''). Make the function void, so that we can also remove all the unneeded if conditions that check for such a _non-existant_ error case in the output path. Signed-off-by:
-
Mike Rapoport authored
Currently "bridge fdb show dev vxlan0" lists loopback address as "1.0.0.127". Using htonl(INADDR_LOOPBACK) rather than passing it directly to vxlan_snoop fixes the problem. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Joe Perches authored
Remove unnecessary macros that duplicate generic kernel functions. When a struct net_device is available: Convert printks to netdev_<level> Convert netif_msg_<foo> and ugeth_<level> to netif_<level> Add pr_fmt. Standardize on newlines at end of format. Remove some duplicated newlines from output. Coalesce formats. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use a more current logging style. Convert pr_<level> to netdev_<level> when a struct net_device is available. Add pr_fmt and neaten other formats too. Signed-off-by:
-
Joe Perches authored
Use a more current logging message style. Convert the printks where a struct net_device is available to netdev_<level>. Convert the other printks to pr_<level> and add pr_fmt where appropriate. Signed-off-by:
-
- 13 Apr, 2013 2 commits
-
-
Eric Dumazet authored
We can move th->check computation out of the loop, as compiler doesn't know each skb initially share same tcp headers after skb_segment() Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Fabio Estevam authored
Currently when booting a mx6 device we get the following on boot: registered PHC device on eth%d Fix it by printing the network device name only after it gets registered, so that the following can be read now: fec 2188000.ethernet eth0: registered PHC device 0 Signed-off-by:
-
- 12 Apr, 2013 9 commits
-
-
Jingchang Lu authored
Freescale Vybrid platform implentments MAC-ENET core providing compatibility with half- or full-duplex 10/100 Mbit/s Ethernet LANs. Signed-off-by:
Jingchang Lu <b35083@freescale.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Jiri Benc authored
As network adapters supporting PTP are becoming more common, machines with many NICs suddenly have many PHCs, too. The current limit of eight /dev/ptp* char devices (and thus, 8 network interfaces with PHC) is insufficient. Let the ptp driver allocate the char devices dynamically. Tested with 28 PHCs, removing and re-adding some of them. Thanks to Ben Hutchings for advice leading to simpler and cleaner patch. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Eric Dumazet authored
I noticed that TSQ (TCP Small queues) was less effective when TSO is turned off, and GSO is on. If BQL is not enabled, TSQ has then no effect. It turns out the GSO engine frees the original gso_skb at the time the fragments are generated and queued to the NIC. We should instead call the tcp_wfree() destructor for the last fragment, to keep the flow control as intended in TSQ. This effectively limits the number of queued packets on qdisc + NIC layers. Signed-off-by:
-
Eric Dumazet authored
tcf_csum_skb_nextlayer() / pskb_may_pull() can change skb->head, so we must be careful not keeping pointers to previous headers. Signed-off-by:
-
Sebastian Hesselbarth authored
With recent support for GRO, there is no need to keep both LRO and GRO. This patch therefore removes the deprecated inet_lro support from mv643xx_eth. This is work is based on an experimental patch provided by Eric Dumazet and Willy Tarreau. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Based-on-patch-by:
Eric Dumazet <eric.dumazet@gmail.com> Based-on-patch-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Wei Yongjun authored
Fixes following warning: drivers/net/vxlan.c:406:6: warning: symbol 'vxlan_fdb_free' was not declared. Should it be static? drivers/net/vxlan.c:1111:37: warning: Using plain integer as NULL pointer Signed-off-by:
-
Jason Wang authored
Switch to use skb_partial_csum_set() to simplify the codes. Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David S. Miller authored
This reverts commit 763eff57. It causes build regressions, as per Stephen Rothwell: ==================== After merging the final tree, today's linux-next build (powerpc allyesconfig) failed like this: net/core/netprio_cgroup.c:250:29: error: static declaration of 'net_prio_subsys' follows non-static declaration include/linux/cgroup_subsys.h:71:1: note: previous declaration of 'net_prio_subsys' was here ==================== Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 11 Apr, 2013 12 commits
-
-
Silviu-Mihai Popescu authored
Convert use of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. This was found with coccinelle. Signed-off-by:
Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by:
-
Ivan Vecera authored
Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Sebastian Hesselbarth authored
This patch adds GRO support to mv643xx_eth by making it invoke napi_gro_receive instead of netif_receive_skb. Signed-off-by:
Soeren Moch <smoch@web.de> Signed-off-by:
-
Jason Wang authored
The vlan_features was zero which prevents vlan GSO packets to be transmitted to userspace. This is suboptimal so enable this by initialize vlan_features for tuntap. Netperf shows better performance of guest receiving since vlan TSO works for tuntap: before: netperf -H 192.168.5.4 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.5.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.01 2786.67 after: netperf -H 192.168.5.4 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.5.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 8085.49 Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jason Wang authored
There's nothing that prevent passing the device features of virtio_net to its vlan device. So this patch simply passes those to vlan device to benefit from advanced features. Netperf shows better sending performance for vlan device since TSO can work on vlan now. before: netperf -H 192.168.5.2 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.5.2 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 4162.35 after: netperf -H 192.168.5.2 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.5.2 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9365.42 Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by:
-
Sebastian Hesselbarth authored
This patch moves shared private data kzalloc to managed devm_kzalloc and cleans now unneccessary kfree and error handling. Signed-off-by:
-
Sebastian Hesselbarth authored
This patch adds an optional shared block clock to avoid lockups on clock gated controllers. Besides the new clock, clock handling for existing clocks is cleaned up and moved to devm_clk_get. Device tree binding documentation is updated for the new clocks property. Signed-off-by:
-
Sebastian Hesselbarth authored
Commit 3d604da1 ("net: mvmdio: get and enable optional clock") was missing an update of the corresponding device tree binding documentation. This patch adds the clocks property to mvmdio binding documentation. Signed-off-by:
-
Jason Wang authored
After commit 2b8b328b (vhost_net: handle polling errors when setting backend), we in fact track the polling state through poll->wqh, so there's no need to duplicate the work with an extra vhost_net_polling_state. So this patch removes this and make the code simpler. This patch also removes the all tx starting/stopping code in tx path according to Michael's suggestion. Netperf test shows almost the same result in stream test, but gets improvements on TCP_RR tests (both zerocopy or copy) especially on low load cases. Tested between multiqueue kvm guest and external host with two direct connected 82599s. zerocopy disabled: sessions|transaction rates|normalize| before/after/+improvements 1 | 9510.24/11727.29/+23.3% | 693.54/887.68/+28.0% | 25| 192931.50/241729.87/+25.3% | 2376.80/2771.70/+16.6% | 50| 277634.64/291905.76/+5% | 3118.36/3230.11/+3.6% | zerocopy enabled: sessions|transaction rates|normalize| before/after/+improvements 1 | 7318.33/11929.76/+63.0% | 521.86/843.30/+61.6% | 25| 167264.88/242422.15/+44.9% | 2181.60/2788.16/+27.8% | 50| 272181.02/294347.04/+8.1% | 3071.56/3257.85/+6.1% | Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== 1) Allow to avoid copying DSCP during encapsulation by setting a SA flag. From Nicolas Dichtel. 2) Constify the netlink dispatch table, no need to modify it at runtime. From Mathias Krause. ==================== Signed-off-by: -
Eugenia Emantayev authored
When setting MTU in SRIOV mode add ETH, VLAN and FCS header length to the maximum MTU obtained from QUERY_DEV_CAP. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Hadar Hen Zion authored
The different steering modes are global to the device, with DMFS being introduced after SRIOV was merged. Hence, SRIOV guests running legacy / older Linux kernels or non-Linux drivers may provide B0 steering directives when the hypervisor is using DMFS and fail. Under B0 only L2 steering rules are allowed, hence B0 is a subset of DMFS. Use this fact to enable such legacy guests to run by modifying the SRIOV B0 steering wrapper to translate guest B0 directives to DMFS ones when the device uses DMFS. The translated B0 rule has to be kept in the resource tracker as a B0 object to allow for lookup in case of detach. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
