Skip to content

L
linux
Switch branch/tag
  1. 24 Jun, 2013 2 commits
    • Aaron Lu's avatar
      libata-acpi: add back ACPI based hotplug functionality · 44521527
      Aaron Lu authored 
      Commit 30dcf76a "libata: migrate ACPI code over to new bindings"
mistakenly dropped the code to register hotplug notificaion handler
for ATA port/devices, causing regression for people using ATA bay,
as kernel bug #59871 shows.

Fix this by adding back the hotplug notification handler registration
code.  Since this code has to be run once and notification needs to
be installed on every ATA port/devices handle no matter if there is
actual device attached, we can't do this in binding time for ATA
device ACPI handle, as the binding only occurs when a SCSI device is
created, i.e. there is device attached.  So introduce the
ata_acpi_hotplug_init() function to loop scan all ATA ACPI handles
and if it is available, install the notificaion handler for it during
ATA init time.

With the ATA ACPI handle binding to SCSI device tree, it is possible
now that when the SCSI hotplug work removes the SCSI device, the ACPI
unbind function will find that the corresponding ACPI device has
already been deleted by dock driver, causing a scaring message like:
[  128.263966] scsi 4:0:0:0: Oops, 'acpi_handle' corrupt
Fix this by waiting for SCSI hotplug task finish in our notificaion
handler, so that the removal of ACPI device done in ACPI unbind
function triggered by the removal of SCSI device is run earlier when
ACPI device is still available.

[rjw: Rebased]
References: https://bugzilla.kernel.org/show_bug.cgi?id=59871Reported-bisected-and-tested-by: default avatarDirk Griesbach <spamthis@freenet.de>
Signed-off-by: default avatarAaron Lu <aaron.lu@intel.com>
Acked-by: default avatarTejun Heo <tj@kernel.org>
Cc: 3.6+ <stable@vger.kernel.org>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      44521527
    • Rafael J. Wysocki's avatar
      ACPI / dock / PCI: Synchronous handling of dock events for PCI devices · 21a31013
      Rafael J. Wysocki authored 
      The interactions between the ACPI dock driver and the ACPI-based PCI
hotplug (acpiphp) are currently problematic because of ordering
issues during hot-remove operations.

First of all, the current ACPI glue code expects that physical
devices will always be deleted before deleting the companion ACPI
device objects.  Otherwise, acpi_unbind_one() will fail with a
warning message printed to the kernel log, for example:

[  185.026073] usb usb5: Oops, 'acpi_handle' corrupt
[  185.035150] pci 0000:1b:00.0: Oops, 'acpi_handle' corrupt
[  185.035515] pci 0000:18:02.0: Oops, 'acpi_handle' corrupt
[  180.013656]  port1: Oops, 'acpi_handle' corrupt

This means, in particular, that struct pci_dev objects have to
be deleted before the struct acpi_device objects they are "glued"
with.

Now, the following happens the during the undocking of an ACPI-based
dock station:
 1) hotplug_dock_devices() invokes registered hotplug callbacks to
    destroy physical devices associated with the ACPI device objects
    depending on the dock station.  It calls dd->ops->handler() for
    each of those device objects.
 2) For PCI devices dd->ops->handler() points to
    handle_hotplug_event_func() that queues up a separate work item
    to execute _handle_hotplug_event_func() for the given device and
    returns immediately.  That work item will be executed later.
 3) hotplug_dock_devices() calls dock_remove_acpi_device() for each
    device depending on the dock station.  This runs acpi_bus_trim()
    for each of them, which causes the underlying ACPI device object
    to be destroyed, but the work items queued up by
    handle_hotplug_event_func() haven't been started yet.
 4) _handle_hotplug_event_func() queued up in step 2) are executed
    and cause the above failure to happen, because the PCI devices
    they handle do not have the companion ACPI device objects any
    more (those objects have been deleted in step 3).

The possible breakage doesn't end here, though, because
hotplug_dock_devices() may return before at least some of the
_handle_hotplug_event_func() work items spawned by it have a
chance to complete and then undock() will cause _DCK to be
evaluated and that will cause the devices handled by the
_handle_hotplug_event_func() to go away possibly while they are
being accessed.

This means that dd->ops->handler() for PCI devices should not point
to handle_hotplug_event_func().  Instead, it should point to a
function that will do the work of _handle_hotplug_event_func()
synchronously.  For this reason, introduce such a function,
hotplug_event_func(), and modity acpiphp_dock_ops to point to
it as the handler.

Unfortunately, however, this is not sufficient, because if the dock
code were not changed further, hotplug_event_func() would now
deadlock with hotplug_dock_devices() that called it, since it would
run unregister_hotplug_dock_device() which in turn would attempt to
acquire the dock station's hp_lock mutex already acquired by
hotplug_dock_devices().

To resolve that deadlock use the observation that
unregister_hotplug_dock_device() won't need to acquire hp_lock
if PCI bridges the devices on the dock station depend on are
prevented from being removed prematurely while the first loop in
hotplug_dock_devices() is in progress.

To make that possible, introduce a mechanism by which the callers of
register_hotplug_dock_device() can provide "init" and "release"
routines that will be executed, respectively, during the addition
and removal of the physical device object associated with the
given ACPI device handle.  Make acpiphp use two new functions,
acpiphp_dock_init() and acpiphp_dock_release(), that call
get_bridge() and put_bridge(), respectively, on the acpiphp bridge
holding the given device, for this purpose.

In addition to that, remove the dock station's list of
"hotplug devices" and make the dock code always walk the whole list
of "dependent devices" instead in such a way that the loops in
hotplug_dock_devices() and dock_event() (replacing the loops over
"hotplug devices") will take references to the list entries that
register_hotplug_dock_device() has been called for.  That prevents
the "release" routines associated with those entries from being
called while the given entry is being processed and for PCI
devices this means that their bridges won't be removed (by a
concurrent thread) while hotplug_event_func() handling them is
being executed.

This change is based on two earlier patches from Jiang Liu.

References: https://bugzilla.kernel.org/show_bug.cgi?id=59501Reported-and-tested-by: default avatarAlexander E. Patrakov <patrakov@gmail.com>
Tracked-down-by: default avatarJiang Liu <jiang.liu@huawei.com>
Tested-by: default avatarIllya Klymov <xanf@xanf.me>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: default avatarYinghai Lu <yinghai@kernel.org>
Cc: 3.9+ <stable@vger.kernel.org>
      21a31013
  3. 22 Jun, 2013 11 commits
  5. 21 Jun, 2013 8 commits
  7. 20 Jun, 2013 18 commits
    • Nicholas Bellinger's avatar
      iscsi-target: Remove left over v3.10-rc debug printks · 58807a52
      Nicholas Bellinger authored 
      Reported-by: default avatarAndy Grover <agrover@redhat.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      58807a52
    • Andy Grover's avatar
      target/iscsi: Fix op=disable + error handling cases in np_store_iser · 58bd0c69
      Andy Grover authored 
      Writing 0 when iser was not previously enabled, so succeed but do
nothing so that user-space code doesn't need a try: catch block
when ib_isert logic is not available.

Also, return actual error from add_network_portal using PTR_ERR
during op=enable failure.
Signed-off-by: default avatarAndy Grover <agrover@redhat.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      58bd0c69
    • Dave Airlie's avatar
      Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes · 9aa36876
      Dave Airlie authored 
      One user visible fix to stop misreport GPU hangs and subsequent resets.
* 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: update lockup tracking when scheduling in empty ring
      9aa36876
    • Jerome Glisse's avatar
      drm/radeon: update lockup tracking when scheduling in empty ring · 8444d5c6
      Jerome Glisse authored 
      There might be issue with lockup detection when scheduling on an
empty ring that have been sitting idle for a while. Thus update
the lockup tracking data when scheduling new work in an empty ring.
Signed-off-by: default avatarJerome Glisse <jglisse@redhat.com>
Tested-by: default avatarAndy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Reviewed-by: default avatarChristian König <christian.koenig@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      8444d5c6
    • Linus Torvalds's avatar
      Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · a3d5c346
      Linus Torvalds authored 
      Pull scheduler fixes from Ingo Molnar:
 "Two smaller fixes - plus a context tracking tracing fix that is a bit
  bigger"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracing/context-tracking: Add preempt_schedule_context() for tracing
  sched: Fix clear NOHZ_BALANCE_KICK
  sched/x86: Construct all sibling maps if smt
      a3d5c346
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 86c76676
      Linus Torvalds authored 
      Pull perf fixes from Ingo Molnar:
 "Four fixes.  The mmap ones are unfortunately larger than desired -
  fuzzing uncovered bugs that needed perf context life time management
  changes to fix properly"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP
  perf: Fix mmap() accounting hole
  perf: Fix perf mmap bugs
  kprobes: Fix to free gone and unused optprobes
      86c76676
    • Linus Torvalds's avatar
      Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 805e3185
      Linus Torvalds authored 
      Pull cpu idle fixes from Thomas Gleixner:
 - Add a missing irq enable. Fallout of the idle conversion
 - Fix stackprotector wreckage caused by the idle conversion

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  idle: Enable interrupts in the weak arch_cpu_idle() implementation
  idle: Add the stack canary init to cpu_startup_entry()
      805e3185
    • Linus Torvalds's avatar
      Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 4db88eb4
      Linus Torvalds authored 
      Pull timer fixes from Thomas Gleixner:
 - Fix inconstinant clock usage in virtual time accounting
 - Fix a build error in KVM caused by the NOHZ work
 - Remove a pointless timekeeping duty assignment which breaks NOHZ
 - Use a proper notifier return value to avoid random behaviour

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Remove useless timekeeping duty attribution to broadcast source
  nohz: Fix notifier return val that enforce timekeeping
  kvm: Move guest entry/exit APIs to context_tracking
  vtime: Use consistent clocks among nohz accounting
      4db88eb4
    • Linus Torvalds's avatar
      Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc · 53d5defc
      Linus Torvalds authored 
      Pull powerpc fix fro, Benjamin Herrenschmidt:
 "We accidentally broke hugetlbfs on Freescale embedded processors which
  use a slightly different page table layout than our server processors"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix bad pmd error with book3E config
      53d5defc
    • Linus Torvalds's avatar
      Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile · f92d0dc9
      Linus Torvalds authored 
      Pull tilepro fix from Chris Metcalf:
 "This change allows the older tilepro architecture to be correctly
  built by newer gccs, despite a change that caused gcc to start trying
  to use an out-of-line implementation for __builtin_ffsll().

  This should be inline again starting with gcc 4.7.4 and 4.8.2 or so,
  but meanwhile this change keeps things from breaking, with the only
  cost being a few bytes of code in the kernel to provide __ffsdi2 even
  for compilers that do inline it"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tilepro: work around module link error with gcc 4.7
      f92d0dc9
    • Linus Torvalds's avatar
      Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 · fd58b517
      Linus Torvalds authored 
      Pull arm64 perf fix from Catalin Marinas:
 "Perf fix (user-mode PC recording)"

* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  perf: arm64: Record the user-mode PC in the call chain.
      fd58b517
    • Al Viro's avatar
      splice: don't pass the address of ->f_pos to methods · 7995bd28
      Al Viro authored 
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      7995bd28
    • Mauro Carvalho Chehab's avatar
      [media] Fix build when drivers are builtin and frontend modules · bb69ee27
      Mauro Carvalho Chehab authored 
      There are a large number of reports that the media build is
not compiling when some drivers are compiled as builtin, while
the needed frontends are compiled as module.

On the last one of such reports:
	From: kbuild test robot <fengguang.wu@intel.com>
	Subject: saa7134-dvb.c:undefined reference to `zl10039_attach'

The .config file has:

	CONFIG_VIDEO_SAA7134=y
	CONFIG_VIDEO_SAA7134_DVB=y
	# CONFIG_MEDIA_ATTACH is not set
	CONFIG_DVB_ZL10039=m

And it produces all those errors:

   drivers/built-in.o: In function `set_type':
   tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach'
   tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach'
   drivers/built-in.o: In function `tuner_probe':
   tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection'
   drivers/built-in.o: In function `av7110_attach':
   av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach'
   av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach'
   av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach'
   av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach'
   av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach'
   av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach'
   av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach'
   drivers/built-in.o: In function `tuner_attach_dtt7520x':
   ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach'
   drivers/built-in.o: In function `demod_attach_lg330x':
   ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach'
   drivers/built-in.o: In function `demod_attach_stv0900':
   ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach'
   drivers/built-in.o: In function `cineS2_probe':
   ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach'
   drivers/built-in.o: In function `configure_tda827x_fe':
   saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach'
   drivers/built-in.o: In function `dvb_init':
   saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach'
   saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach'
   saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach'
   drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow
   drivers/built-in.o: In function `dvb_init':
   saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach'
   saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach'
   saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach'
>> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach'

This is happening because a builtin module can't use directly a symbol
found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration
becomes valid, as dvb_attach() macro loads the module if needed, making
the symbol available to the builtin module.

While this bug started to appear after the patches that use IS_DEFINED
macro (like changeset 7b34be71), this
bug is a way ancient than that.

The thing is that, before the IS_DEFINED() patches, the logic used to be:

       && defined(MODULE))
struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
					u8 i2c_addr,
					struct i2c_adapter *i2c);
static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
					u8 i2c_addr,
					struct i2c_adapter *i2c)
{
	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
	return NULL;
}

The above code, with the .config file used, was evoluting to FALSE
(instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'),
and were adding the static inline code at saa7134-dvb, instead
of the external call. So, while it weren't producing any compilation
error, the code weren't working either.

So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just
enable it, if MODULES is defined.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      bb69ee27
    • Shawn Guo's avatar
      irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case · 8b6fd652
      Shawn Guo authored 
      Commit c0114709 (irqchip: gic: Perform the gic_secondary_init() call via
CPU notifier) moves gic_secondary_init() that used to be called in
.smp_secondary_init hook into a notifier call.  But it changes the
system behavior a little bit.  Before the commit, gic_cpu_init()
is called not only when kernel brings up the secondary cores but also
when system resuming procedure hot-plugs the cores back to kernel.
While after the commit, the function will not be called in the latter
case, where the 'action' will not be CPU_STARTING but
CPU_STARTING_FROZEN.  This behavior difference at least causes the
following suspend/resume regression on imx6q.

$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
mmc1: card e624 removed
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
PM: suspend of devices complete after 5.930 msecs
PM: suspend devices took 0.010 seconds
PM: late suspend of devices complete after 0.343 msecs
PM: noirq suspend of devices complete after 0.828 msecs
Disabling non-boot CPUs ...
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17)
Task dump for CPU 1:
swapper/1       R running      0     0      1 0x00000000
Backtrace:
[<bf895ff4>] (0xbf895ff4) from [<00000000>] (  (null))
Backtrace aborted due to bad frame pointer <8007ccdc>
Task dump for CPU 2:
swapper/2       R running      0     0      1 0x00000000
Backtrace:
[<8075dbdc>] (0x8075dbdc) from [<00000000>] (  (null))
Backtrace aborted due to bad frame pointer <00000002>
Task dump for CPU 3:
swapper/3       R running      0     0      1 0x00000000
Backtrace:
[<8075dbdc>] (0x8075dbdc) from [<00000000>] (  (null))

Fix the regression by checking 'action' being CPU_STARTING_FROZEN to
have gic_cpu_init() called for secondary cores when system resumes.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Acked-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Tested-by: default avatarJoseph Lo <josephl@nvidia.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      8b6fd652
    • Michel Lespinasse's avatar
      x86: Fix trigger_all_cpu_backtrace() implementation · b52e0a7c
      Michel Lespinasse authored 
      The following change fixes the x86 implementation of
trigger_all_cpu_backtrace(), which was previously (accidentally,
as far as I can tell) disabled to always return false as on
architectures that do not implement this function.

trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h,
should call arch_trigger_all_cpu_backtrace() if available, or
return false if the underlying arch doesn't implement this
function.

x86 did provide a suitable arch_trigger_all_cpu_backtrace()
implementation, but it wasn't actually being used because it was
declared in asm/nmi.h, which linux/nmi.h doesn't include. Also,
linux/nmi.h couldn't easily be fixed by including asm/nmi.h,
because that file is not available on all architectures.

I am proposing to fix this by moving the x86 definition of
arch_trigger_all_cpu_backtrace() to asm/irq.h.

Tested via: echo l > /proc/sysrq-trigger

Before the change, this uses a fallback implementation which
shows backtraces on active CPUs (using
smp_call_function_interrupt() )

After the change, this shows NMI backtraces on all CPUs
Signed-off-by: default avatarMichel Lespinasse <walken@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1370518875-1346-1-git-send-email-walken@google.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      b52e0a7c
    • Jed Davis's avatar
      perf: arm64: Record the user-mode PC in the call chain. · abc41254
      Jed Davis authored 
      With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip,
and the corresponding change in arch/arm.
Signed-off-by: default avatarJed Davis <jld@mozilla.com>
Acked-by: default avatarIngo Molnar <mingo@kernel.org>
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      abc41254
    • Mauro Carvalho Chehab's avatar
      [media] s5p makefiles: don't override other selections on obj-[ym] · 5f63adbb
      Mauro Carvalho Chehab authored 
      The $obj-m/$obj-y vars should be adding new modules to build, not
overriding it. So, it should never use
	$obj-y := foo.o
instead, it should use:
	$obj-y += foo.o

Failing to do that is very bad, as it will suppress needed modules.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      5f63adbb
    • Aneesh Kumar K.V's avatar
      powerpc: Fix bad pmd error with book3E config · 8bbd9f04
      Aneesh Kumar K.V authored 
      Book3E uses the hugepd at PMD level and don't encode pte directly
at the pmd level. So it will find the lower bits of pmd set
and the pmd_bad check throws error. Infact the current code
will never take the free_hugepd_range call at all because it will
clear the pmd if it find a hugepd pointer. Fix this by clearing
bad pmd only if it is not a hugepd pointer.

This is regression introduced by e2b3d202
"powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format"
Reported-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8bbd9f04
  9. 19 Jun, 2013 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7