- 29 Aug, 2016 7 commits
-
-
Liu Ying authored
According to basic tests, it looks there is no issue if we don't wait for DMFC FIFO to clear when disabling DMFC channel. NXP BSP doesn't do that, either. This patch is needed to avoid the annoying warning caused by a timeout on waiting for the FIFO to clear after we add the new DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET flag to the imx-drm driver which changes the procedure to disable display channel slightly. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de>
-
Liu Ying authored
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter of the helper drm_atomic_helper_commit_planes() if the relevant display controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes when the CRTC is disabled. The helper would skip the ->atomic_disable call for a plane if the CRTC of the old plane state needs a modesetting operation. Of course, the drivers need to disable the planes in their CRTC disable callbacks since no one else would do that. Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Liu Ying authored
Currently, the helper drm_atomic_helper_disable_planes_on_crtc() calls ->atomic_disable for all planes _to be_ enabled on a particular CRTC. This is obviously wrong for those planes which are not scanning out frames when the helper is called. Instead, it's sane to disable active planes of old_crtc_state in the helper. Suggested-by:
-
Liu Ying authored
Some display controllers need plane(s) to be disabled together with the relevant CRTC, e.g., the IPUv3 display controller for imx-drm. This patch adds atomic_disable CRTC helper callback so that old_crtc_state(as a parameter of the callback) could be used to get the active plane(s) of the old CRTC state for disable operation. Suggested-by:
-
Andrea Merello authored
Introduce drm_simple_display_pipe_attach_bridge() and drm_simple_display_pipe_detach_bridge() in order to make it possible to use drm encoders with the simple display pipes managed by simple_kms_helpers Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Andrea Merello <andrea.merello@gmail.com> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1472115874-6219-3-git-send-email-andrea.merello@gmail.com
-
Andrea Merello authored
drm_simple_display_pipe_init() pretends to attach a connector to the display pipe. In case a drm bridge has to be used, then it's the bridge that takes care of connectors. This patch makes the connector parameter optional for drm_simple_display_pipe_init(), so that a drm bridge could handle connector by itself later. Signed-off-by:
-
Andrea Merello authored
Up to now, once a bridge has been attached to a DRM device, it cannot be undone. In particular you couldn't rmmod/insmod a DRM driver that uses a bridge, because the bridge would remain bound to the first (dead) driver instance. This patch fixes this by introducing drm_encoder_detach() and a ->detach callback in drm_bridge_funcs for the bridge to be notified about detaches. It's DRM/KMS driver responsibility to call drm_encoder_detach(). While adding the bridge detach callback, with its kerneldoc, I also added kerneldoc for attach callback. Few other kerneldocs fixes around there are included. Suggested-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
- 25 Aug, 2016 4 commits
-
-
Daniel Vetter authored
Our update function is hooked to the single plane, which might not get called for crtc-only updates. Which is surprising, so fix this by always adding the plane. While at it document how&when the event should be sent out better in the kerneldoc. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: andrea.merello@gmail.com Tested-and-Reported-by: andrea.merello@gmail.com Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
David Herrmann authored
The *only* known user of GETCLIENT is libva, which uses it to check whether its own context is authenticated. It used to iterate all clients, look for one that matches its own pid and then check its state. The entire purpose for us to still have a GETCLIENT implementation is to serve libva. So lets not pretend we do anything else: Make this function return information on the caller's context only, fake the PID to the caller's pid so they always match, and just fill in the "authenticated" bit, nothing else. This patch reduces the complexity of GETCLIENT to a bare minimum, avoids any dependency on priv->uid or priv->pid (allows us to get rid of them), and makes libva happy by always *exactly* returning the information it wants. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
David Herrmann authored
The legacy DRI1 drivers expose highly broken interfaces to user-space. No modern system should enable them, or you will effectively allow user-space to circumvent most of your kernel security measures. The DRI1 kernel APIs are simply broken. User-space can always use vesafb/efifb/simplefb and friends to get working graphics. Lets hide the old drivers behind CONFIG_BROKEN. In case they turn out to be still used (really?), we can easily revert this and figure out a way to move them out of sight (e.g., moving all DRI1 drivers to drivers/gpu/dri1/). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
David Herrmann authored
Lets move forward and hide the remaining DRI1 drivers behind a config option, so we have a central place to disable them all. Furthermore, we can provide a clear warning to anyone enabling them. Signed-off-by:
-
- 24 Aug, 2016 2 commits
-
-
Daniel Vetter authored
Reported-by:
-
Masahiro Yamada authored
Commit d112a816 ("gma500/cdv: Add eDP support") replaced the code inside this if-conditional with gma_backlight_set(), which becomes a nop stub if CONFIG_BACKLIGHT_CLASS_DEVICE is disabled. So, there is no need to guard the caller with config_enabled(). Note: This is one of remaining TODOs to deprecate config_enabled() macro. Refer to commit 97f2645f ("tree-wide: replace config_enabled() with IS_ENABLED()"). Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 23 Aug, 2016 9 commits
-
-
Daniel Vetter authored
Everyone knows them, except all the new folks joining from the ARM side haven't lived through all the pain of the past years and are entirely surprised when I raise this. Definitely time to document this. Last time this was a big discussion was about 6 years ago, when qcom tried to land a kernel driver without userspace. Dave Airlie made the rules really clear: http://airlied.livejournal.com/73115.html This write-up here is essentially what I've put into a presentation a while ago, which was also reviewed by Dave: http://blog.ffwll.ch/2015/05/gfx-kernel-upstreaming-requirements.html v2: Fix typos Eric&Rob spotted. v3: Nitpick from Jani. Cc: Dave Airlie <airlied@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
Dave Airlie <airlied@gmail.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
A few bigger things: - start of splitting drm_crtc.c into more manageable and better documneted chunks - DRM_DEV_* logging (Sean) * tag 'topic/drm-misc-2016-08-23' of git://anongit.freedesktop.org/drm-intel: (46 commits) drm/fb-helper: Make docs for fb_set_suspend wrappers consistent drm/rockchip: Delete unnecessary assignment for the field "owner" drm/bridge: dw-hdmi: Delete unnecessary assignment for the field "owner" drm/rockchip: Don't continue trying to enable crtc on failure drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked() drm/fb-helper: Fix the dummy remove_conflicting_framebuffers drm/udl: Ensure channel is selected before using the device. drm: Avoid calling dev_printk(.dev = NULL) drm: avoid exposing kernel stack in compat_drm_getstats reservation: fix small comment typo drm: Don't implement empty prepare_fb()/cleanup_fb() virtio-gpu: Use memdup_user() rather than duplicating its implementation GPU-DRM-Savage: Use memdup_user() rather than duplicating drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fb drm/rockchip: Use DRM_DEV_ERROR in vop drm: Introduce DRM_DEV_* log messages drm/edid: CEA mode 64 1080p100 vsync pulse width incorrect Revert "drm/hisilicon: Don't set drm_device->platformdev" dma-buf: fix kernel-doc warning and typos drm: Fix kerneldoc in drm_plane_helper.c ...
-
Daniel Vetter authored
I figured I might as well go ocd and make them booleans and rename the locked version too. v2: Review from Noralf. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Fixes: cfe63423 ("drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked()") Acked-by:
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/41e48fd3-f713-7225-1df2-3b1f4758f949@users.sourceforge.net
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
-
Sean Paul authored
If vop_enable fails, don't continue on, it causes system hangs. Reviewed-by:
Yakir Yank <ykk@rock-chips.com> Tested-by:
-
Noralf Trønnes authored
This adds a function that also takes the console lock before calling fb_set_suspend() in contrast to drm_fb_helper_set_suspend() which is a plain wrapper around fb_set_suspend(). Resume is run asynchronously using a worker if the console lock is already taken. This is modelled after the i915 driver. Signed-off-by:
-
Chris Wilson authored
We always need to remove conflicting framebuffers if any other fb driver is enabled, and not just if we are setting up an fbdev ourselves. Unfortunately remove_conflicting_framebuffers() was incorrectly stubbed out if !fbdev rather than !fb leading to major memory corruption (and corrupt filesystems) upon boot. Fixes: 44adece5 ("drm/fb-helper: Add a dummy remove_conflicting_framebuffers") Signed-off-by:
-
Jamie Lentin authored
Lift configuration command from udlfb. This appears to be essential for at least a Rextron VCUD-60, without which no URB communication occurs. Signed-off-by:
Jamie Lentin <jm@lentin.co.uk> Signed-off-by:
-
- 22 Aug, 2016 3 commits
-
-
Chris Wilson authored
Since dev_printk likes to print "(NULL device *):" when passed in a NULL pointer, we have to manually call printk() ourselves. Fixes: c4e68a58 ("drm: Introduce DRM_DEV_* log messages") Signed-off-by:
-
Heinrich Schuchardt authored
The C standard does not specify the size of the integer used to store an enum. Hence in structure drm_stats32_t alignment bytes may exist. To avoid exposing bytes from the kernel stack it is necessary to initialize variable s32 completely. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
- 19 Aug, 2016 4 commits
-
-
Laurent Pinchart authored
The plane .prepare_fb() and .cleanup_fb() helpers are optional, there's no need to implement empty stubs, and no need to explicitly set the function pointers to NULL either. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [danvet: Resolved conflicts with Chris' patch.] Signed-off-by:
-
Markus Elfring authored
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Chris Wilson authored
The drivers have to modify the atomic plane state during the prepare_fb callback so they track allocations, reservations and dependencies for this atomic operation involving this fb. In particular, how else do we set the plane->fence from the framebuffer! Signed-off-by:
-
- 18 Aug, 2016 3 commits
-
-
Sean Paul authored
Since we can have multiple vops, use DRM_DEV_ERROR to make logs easier to process. Acked-by:
Mark Yao <mark.yao@rockchip.com> Signed-off-by:
-
Sean Paul authored
This patch consolidates all the various log functions/macros into one uber function, drm_log. It also introduces some new DRM_DEV_* variants that print the device name to delineate multiple devices of the same type. Reviewed-by:
Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by:
-
Clint Taylor authored
In the CEA-861 specification VIC 64 specifies a vsync pulse of 5 and a backporch of 36. Adjust vsync pulse width to match specification. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
-
- 17 Aug, 2016 2 commits
-
-
Daniel Vetter authored
This reverts commit d25bcfb8. I somehow missed that it only compiles on arm64 and broke the driver rather badly. Signed-off-by:
-
Randy Dunlap authored
Fix dma-buf kernel-doc warning and 2 minor typos in fence_array_create(). Fixes this warning: ..//drivers/dma-buf/fence-array.c:124: warning: No description found for parameter 'signal_on_any' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/224865a5-947d-9a28-c60a-18fa86bc9329@infradead.org
-
- 16 Aug, 2016 6 commits
-
-
Daniel Vetter authored
Ville ocd'ed the parameter name, but forgot to update the docs! Fixes: df86af91 ("drm/plane-helper: Add drm_plane_helper_check_state()") Cc: Sean Paul <seanpaul@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Move the documentation into Documentation/gpu, link it up and pull in the kernel doc. No actual text changes except that I did polish the kerneldoc a bit, especially for vga_client_register(). v2: Remove some rst from vga-switcheroo.rst that I don't understand, but which seems to be the reason why the new vgaarbiter.rst sometimes drops out of the sidebar index. v3: Drop one level of headings and clarify the vgaarb one a bit. v4: Fix some typos (Sean). Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Daniel Vetter authored
We seem to have a bit a mess in how to describe the bus formats, with a multitude of competing ways. Might be best to consolidate it all and use MEDIA_BUS_FMT_ also for the hdmi color formats and high color modes. Also move all the display_info related functions into drm_connector.c (there's only one) to group it all together. I did decided against also moving the edid related display info functions, they seem to fit better in drm_edid.c. Instead sprinkle a few cross references around. While at that reduce the kerneldoc for static functions, there's not point in documenting internals with that much detail really. v2: Fix typo and move misplaced hunk (Sean). Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Daniel Vetter authored
No one looks at it, only i915/gma500 lvds even bother to fill it out. I guess a very old plan was to use this for filtering modes, but that's already done within the edid parser. v2: Move misplaced hunk to this patch. Reviewed-by:
-
Daniel Vetter authored
- Shuffle docs from drm-kms.rst into the structure docs where it makes sense. - Put the remaining bits into a new overview section. One thing I've changed is around probing: Old docs says that you _must_ use the probe helpers, which isn't correct. Helpers are always optional. v2: Review from Sean. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Daniel Vetter authored
They're only used internally within the dp helpers. Also nuke the kerneldoc (we only document the driver interface in the drm shared functions). And move the header file from the public include/ directory to the source files into drm_crtc_helper_internal.h, similar to how we already have drm_crtc_internal.h. While at it also move drm_fb_helper_modinit since that belongs in there, too. I noticed this all since I spotted kerneldoc which wasn't pulled into the rst templates. v2: Update Copyright date. Cc: Sean Paul <seanpaul@chromium.org> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by:
-
