- 18 Jul, 2018 40 commits
-
-
Boris Brezillon authored
Rename nand_default_bbt() into nand_create_bbt() and pass it a nand_chip object to prepare removal of the chip->scan_bbt() hook. We add a temporary nand_default_bbt() wrapper which will be dropped after the removal of ->scan_bbt(). Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
struct device_node is defined in linux/of.h. Let's include this file instead of having a forward declaration of this struct. Signed-off-by:
-
Boris Brezillon authored
struct mtd_info is defined in linux/mtd/mtd.h which is included at the beginning of nand_base.c, there's thus no need for the forward declaration of mtd_info. Signed-off-by:
-
Boris Brezillon authored
nand_do_read() is a static function implemented in nand_base.c. There's no good reason to expose its prototype in rawnand.h. Signed-off-by:
-
Boris Brezillon authored
Leaving a function pointer to NULL should be enough to trigger a NULL pointer exception, and anyway, if we want to BUG() when some missing hooks are called, this should be done in the core, so let's drop the cafe_nand_bug() dummy function. Signed-off-by:
-
Boris Brezillon authored
This allows us to increase compile-test coverage without having to build a kernel for MIPS. That's particularly interesting for subsystem maintainers that want to test as many drivers as possible in a single build. We also add a dependency on HAS_IOMEM in BCMA_HOST_SOC to make sure the driver is not selected when the arch does not implement IO accessors. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Boris Brezillon authored
It just makes NAND maintainers' life easier by allowing them to compile-test this driver without having ARCH_W90X900 enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by:
-
Boris Brezillon authored
It just makes NAND maintainers' life easier by allowing them to compile-test this driver without having ARCH_QCOM enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by:
-
Boris Brezillon authored
It just makes NAND maintainers' life easier by allowing them to compile-test this driver without having ARCH_MXC enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by:
-
Boris Brezillon authored
asm/mach/flash.h does not seem to be needed, drop this #include to make the code completely machine and arch independent and allow one to compile it when COMPILE_TEST=y. Signed-off-by:
-
Boris Brezillon authored
It just makes NAND maintainers' life easier by allowing them to compile-test this driver without having ARM, ARM64 or MIPS enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by:
-
Boris Brezillon authored
It just makes NAND maintainers' life easier by allowing them to compile-test these drivers without having ARCH_LPC32XX enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by:
-
Boris Brezillon authored
It just makes NAND maintainers' life easier by allowing them to compile-test this driver without having ARCH_PXA enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by:
-
Boris Brezillon authored
We don't need mach/hardware.h and sm/mach-types.h, and asm/io.h can be replaced by linux/io.h. Now that we removed those inclusions, we're ready to allow selection of this driver when COMPILE_TEST=y. Signed-off-by:
-
Boris Brezillon authored
It just makes NAND maintainers' life easier by allowing them to compile-test this driver without having ARCH_OMAP2PLUS or ARCH_KEYSTONE enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by:
-
Boris Brezillon authored
When COMPILE_TEST is allowed and the platform needs uses the iomem API we need to add an explicit dependency on HAS_IOMEM to avoid selection of these drivers when building for an arch that has no iomem support (this is the case of arch/um). Signed-off-by:
-
Boris Brezillon authored
The MTD_NAND_GPMI_NAND entry is already defined in an 'if MTD_NAND' block, no need to add an extra "depends on MTD_NAND". Signed-off-by:
-
Abhishek Sahu authored
NAND parts can have bitflips in an erased page due to the process technology used. In this case, QCOM NAND controller is not able to identify that page as an erased page. Currently the driver calls nand_check_erased_ecc_chunk() for identifying the erased pages but this won’t work always since the checking is being with ECC engine returned data. In case of bitflips, the ECC engine tries to correct the data and then it generates the uncorrectable error. Now, this data is not equal to original raw data. For erased CW identification, the raw data should be read again from NAND device and this nand_check_erased_ecc_chunk function() should be called for raw data only. Now following logic is being added to identify the erased codeword bitflips. 1. In most of the cases, not all the codewords will have bitflips and only single CW will have bitflips. So, there is no need to read the complete raw page data. The NAND raw read can be scheduled for any CW in page. The NAND controller works on CW basis and it will update the status register after each CW read. Maintain the bitmask for the CW which generated the uncorrectable error. 2. Do raw read for all the CW's which generated the uncorrectable error. 3. Both DATA and OOB need to be checked for number of 0. The top-level API can be called with only data buf or OOB buf so use chip->databuf if data buf is null and chip->oob_poi if OOB buf is null for copying the raw bytes temporarily. 4. For each CW, check the number of 0 in cw_data and usable oob bytes, The bbm and spare (unused) bytes bit flip won’t affect the ECC so don’t check the number of bitflips in this area. Signed-off-by:
Abhishek Sahu <absahu@codeaurora.org> Signed-off-by:
-
Colin Ian King authored
Variable payload_virt is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'payload_virt' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Miquel Raynal authored
nand_release() should not be called on an MTD device that has not been registered. While it should work thanks to the checks done in mtd_device_unregister() it's a bad practice to cleanup/release something that has not previously been initialized/allocated. Rework the error path to follow this rule. Signed-off-by: -
Masahiro Yamada authored
This commit improves the ->setup_data_interface() hook. The denali_setup_data_interface() needs the frequency of clk_x and the ratio of clk_x / clk. The latter is currently hardcoded in the driver, like this: #define DENALI_CLK_X_MULT 6 The IP datasheet requires that clk_x / clk be 4, 5, or 6. I just chose 6 because it is the most defensive value, but it is not optimal. By getting the clock rate of both "clk" and "clk_x", the driver can compute the timing values more precisely. To not break the existing platforms, the fallback value, 50 MHz is provided. It is true for all upstreamed platforms. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Richard Weinberger <richard@nod.at> Tested-by:
-
Masahiro Yamada authored
Currently, denali_dt.c requires a single anonymous clock, but the Denali User's Guide requires three clocks for this IP: - clk: controller core clock - clk_x: bus interface clock - ecc_clk: clock at which ECC circuitry is run This commit supports these named clocks to represent the real hardware. For the backward compatibility, the driver still accepts a single clock just as before. The clk_x_rate is taken from the clock driver again if the named clock "clk_x" is available. This will happen only for future DT, hence the existing DT files are not affected. Signed-off-by:
-
Masahiro Yamada authored
Commit 30f9f2fb ("mtd: denali: add a DT driver") supported the clock enablement, but did not document it in the DT binding. In addition to the existing clock, this commit adds more clocks based on the IP specification. According to the Denali User's Guide, this IP needs three clocks: - clk: controller core clock - clk_x: bus interface clock - ecc_clk: clock at which ECC circuitry is run The driver should accept the current single clock for the backward compatibility, but the DT binding should represent the real hardware, and future platforms must follow this. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
The probe function references &pdev->dev many times, and I will add more soon. Add 'dev' as a shorthand. Signed-off-by:
-
Martin Kaiser authored
Using the sysfs unbind, bind nodes, mxcnd_probe and mxcnd_probe_dt can potentially be called at any time. After the __init functions are cleaned, mxcnd_probe_dt is no longer available. Calling it anyway causes a crash. mxcnd_probe used to be marked as __init, this was removed years ago. Remove the __init qualifier from from mxcnd_probe_dt as well. Fixes: 06f25510 ("mtd: remove use of __devinit") Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
-
Miquel Raynal authored
MX35LF2GE4AB is almost identical to MX35LF1GE4AB except it has 2 times more eraseblocks per LUN and exposes 2 planes instead of 1. Signed-off-by:
-
Boris Brezillon authored
Add minimal support for the MX35LF1GE4AB SPI NAND chip. Signed-off-by:
-
Frieder Schrempf authored
Add support for the W25M02GV chip. Signed-off-by:
Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by:
-
Peter Pan authored
Add a basic driver for Micron SPI NANDs. Only one device is supported right now, but the driver will be extended to support more devices afterwards. Signed-off-by:
Peter Pan <peterpandong@micron.com> Signed-off-by:
-
Boris Brezillon authored
Add bindings for SPI NAND chips. Signed-off-by:
-
Peter Pan authored
Add a SPI NAND framework based on the generic NAND framework and the spi-mem infrastructure. In its current state, this framework supports the following features: - single/dual/quad IO modes - on-die ECC Signed-off-by:
-
Abhishek Sahu authored
Function nand_ecc_choose_conf() will be help for all the cases, so other helper functions can be made static. nand_check_ecc_caps(): Invoke nand_ecc_choose_conf() with both chip->ecc.size and chip->ecc.strength value set. nand_maximize_ecc(): Invoke nand_ecc_choose_conf() with NAND_ECC_MAXIMIZE flag. nand_match_ecc_req(): Invoke nand_ecc_choose_conf() with either chip->ecc.size or chip->ecc.strength value set and without NAND_ECC_MAXIMIZE flag. CC: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: -
Abhishek Sahu authored
Make separate function to perform raw read for one codeword and call this function multiple times for each codeword in case of raw page read. This separate function will help in subsequent patches related with erased codeword bitflip detection. It will decrease throughput for raw page read. Raw page read is used for debug purpose so it won't affect normal flash operations. Signed-off-by:
-
Abhishek Sahu authored
Currently there is no error checking for raw read. For raw reads, there won’t be any ECC failure but the operational failures are possible, so schedule the NAND_FLASH_STATUS read after each codeword. Signed-off-by:
-
Abhishek Sahu authored
Fix value returned by ->read_page_raw() to be the actual operation status, instead of always 0. Signed-off-by:
-
Abhishek Sahu authored
QCOM NAND controller layout protects available OOB data bytes with ECC also so when ecc->write_oob() is being called then it can't update just OOB bytes. Currently, it first reads the last codeword which includes old OOB bytes. Then it updates the old OOB bytes with new ones and then again writes the codeword back. The reading codeword is unnecessary since user is responsible to have these bytes cleared to 0xFF. This patch removes the read part and updates the OOB bytes with data area padded with OxFF. Signed-off-by:
-
Abhishek Sahu authored
read_page and read_oob both calls the read_page_ecc function. The QCOM NAND controller protect the OOB available bytes with ECC so read errors should be checked for read_oob also. This patch moves the error checking code inside read_page_ecc so caller does not have to check explicitly for read errors. Signed-off-by:
-
Abhishek Sahu authored
parse_read_errors can be called with only oob_buf in which case data_buf will be NULL. If data_buf is NULL, then don’t treat this page as completely erased in case of ECC uncorrectable error for RS ECC. For BCH ECC, the controller itself tells regarding erased page in status register. Signed-off-by:
-
Abhishek Sahu authored
Following is the flow in the HW if controller tries to read erased page: 1. First ECC uncorrectable error will be generated from ECC engine since ECC engine first calculates the ECC with all 0xff and match the calculated ECC with ECC code in OOB (which is again all 0xff). 2. After getting ECC error, erased CW detection logic will be applied which is different for BCH and RS ECC a. For BCH, HW checks if all the bytes in page are 0xff and then it updates the status in separate register NAND_ERASED_CW_DETECT_STATUS. b. For RS ECC, the HW reports the same error when reading an erased CW, but it notifies that it is an erased CW by placing special characters at certain offsets in the buffer. So the erased CW detect status should be checked only if ECC engine generated the uncorrectable error. Currently for all other operational errors also (like TIMEOUT, MPU errors, etc.), the erased CW detect logic is being applied so fix this and return EIO for other operational errors. Signed-off-by: -
Abhishek Sahu authored
The BAM has 3 channels - tx, rx and command. command channel is used for register read/writes, tx channel for data writes and rx channel for data reads. Currently, the driver assumes the transfer completion once it gets all the command descriptors completed. Sometimes, there is race condition between data channel (tx/rx) and command channel completion. In these cases, the data present in buffer is not valid during small window between command descriptor completion and data descriptor completion. This patch generates NAND transfer completion when both (Data and Command) DMA channels have completed all its DMA descriptors. It assigns completion callback in last DMA descriptors of that channel and wait for completion. Fixes: 8d6b6d7e ("mtd: nand: qcom: support for command descriptor formation") Cc: stable@vger.kernel.org Signed-off-by:
-
