Many comments above functions start with a kernel doc indicator, but
the comments are not using kernel doc style. Get rid of the warnings
by simply removing the indicator.

E.g.:

drivers/s390/net/netiucv.c:1852: warning:
 This comment starts with '/**', but isn't a kernel-doc comment.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many comments above functions start with a kernel doc indicator, but
the comments are not using kernel doc style. Get rid of the warnings
by simply removing the indicator.

E.g.:

drivers/s390/net/lcs.c:2355: warning:
 This comment starts with '/**', but isn't a kernel-doc comment.
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many comments above functions start with a kernel doc indicator, but
the comments are not using kernel doc style. Get rid of the warnings
by simply removing the indicator.

E.g.:

drivers/s390/net/ctcm_main.c:979: warning:
 This comment starts with '/**', but isn't a kernel-doc comment.
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: spectrum: Adjustments to port split and label port

Jiri says:

This patchset includes patches that prepare the driver to support modular
systems.

PLLP register is introduced to get front panel port label which is no
longer equivalent to "module + 1" for modular systems, where the
numbering is per line card.

So far for all systems all front panel ports had same format and could
be split to the same number of subports. This is no longer true for
modular systems, where every line card can have different types of front
panel ports.

The PMTDB register is introduced to easily query FW for split
capabilities of particular front panel port. It is generic for use in
modular and non-modular systems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not used anymore, remove it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Newly introduced PMTDB register is there to provide all needed info
about particular requested port split configuration. Use it instead of
figuring the info out manually in the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PMTDB register allows to query the possible module<->local port
mapping than can be used in PMLP. It does not represent the actual/current
mapping of the local to module. Actual mapping is only defined by PMLP.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on the values coming from the PMLP register, use PLLP
to get the information about port front panel number and split number.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PLLP register returns the mapping from Local Port into Label Port.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During port creation, mlxsw_core_port_init() is called with the front
panel port number and the split port sub-number. Currently, this
information is determined by the driver without firmware assistance.

Subsequent patches are going to query this information from firmware,
but this requires the port to assigned to SWID.

Therefore, move port SWID assignment before mlxsw_core_port_init().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During port creation, mlxsw_core_port_init() is called with the front
panel port number and the split port sub-number. Currently, this
information is determined by the driver without firmware assistance.

Subsequent patches are going to query this information from firmware,
but this requires the port to be mapped to a module.

Therefore, move port mapping before mlxsw_core_port_init().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add latest verified version of Nvidia Spectrum-family switch firmware,
for Spectrum (13.2008.3326), Spectrum-2 (29.2008.3326) and Spectrum-3
(30.2008.3326).
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch brings-in support for M.2 7560 Device firmware flashing &
coredump collection using devlink.
- Driver Registers with Devlink framework.
- Register devlink params callback for configuring device params
  required in flashing or coredump flow.
- Implements devlink ops flash_update callback that programs modem
  firmware.
- Creates region & snapshot required for device coredump log collection.

On early detection of device in boot rom stage. Driver registers with
Devlink framework and establish transport channel for PSI (Primary Signed
Image) injection. Once PSI is injected to device, the device execution
stage details are read to determine whether device is in flash or
exception mode. The collected information is reported to devlink user
space application & based on this informationi, application proceeds with
either modem firmware flashing or coredump collection.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Krzysztof Kozlowski says:

====================
nfc: minor printk cleanup

Changes since v1:
1. Remove unused variable in pn533 (reported by kbuild).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

nci_skb_alloc() already prints an error message on memory allocation
failure.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc_mei_phy_alloc() already prints an error message on memory allocation
failure.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc_mei_phy_alloc() already prints an error message on memory allocation
failure.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ftrace is a preferred and standard way to debug entering and exiting
functions so drop useless debug prints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Print error message with reference to a device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ftrace is a preferred and standard way to debug entering and exiting
functions so drop useless debug prints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ftrace is a preferred and standard way to debug entering and exiting
functions so drop useless debug prints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unneeded line break between pr_debug and arguments.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As it was reported and discussed in: https://lore.kernel.org/lkml/CAHk-=whF9F89vsfH8E9TGc0tZA-yhzi2Di8wOtquNB5vRkFX5w@mail.gmail.com/
This patch improves the stack space of qede_config_rx_mode() by
splitting filter_config() to 3 functions and removing the
union qed_filter_type_params.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes and stragglers from Jakub Kicinski:
 "Networking stragglers and fixes, including changes from netfilter,
  wireless and can.

  Current release - regressions:

   - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi

   - ip_gre: validate csum_start only on pull

   - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels

   - ionic: fix double use of queue-lock, fix a sleeping in atomic

   - can: c_can: fix null-ptr-deref on ioctl()

   - cs89x0: disable compile testing on powerpc

  Current release - new code bugs:

   - bridge: mcast: fix vlan port router deadlock, consistently disable
     BH

  Previous releases - regressions:

   - dsa: tag_rtl4_a: fix egress tags, only port 0 was working

   - mptcp: fix possible divide by zero

   - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex

   - netfilter: socket: icmp6: fix use-after-scope

   - stmmac: fix MAC not working when system resume back with WoL active

  Previous releases - always broken:

   - ip/ip6_gre: use the same logic as SIT interfaces when computing
     v6LL address

   - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6

   - mptcp: only send extra TCP acks in eligible socket states

   - dsa: lantiq_gswip: fix maximum frame length

   - stmmac: fix overall budget calculation for rxtx_napi

   - bnxt_en: fix firmware version reporting via devlink

   - renesas: sh_eth: add missing barrier to fix freeing wrong tx
     descriptor

  Stragglers:

   - netfilter: conntrack: switch to siphash

   - netfilter: refuse insertion if chain has grown too large

   - ncsi: add get MAC address command to get Intel i210 MAC address"

* tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
  ieee802154: Remove redundant initialization of variable ret
  net: stmmac: fix MAC not working when system resume back with WoL active
  net: phylink: add suspend/resume support
  net: renesas: sh_eth: Fix freeing wrong tx descriptor
  bonding: 3ad: pass parameter bond_params by reference
  cxgb3: fix oops on module removal
  can: c_can: fix null-ptr-deref on ioctl()
  can: rcar_canfd: add __maybe_unused annotation to silence warning
  net: wwan: iosm: Unify IO accessors used in the driver
  net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors
  net: qcom/emac: Replace strlcpy with strscpy
  ip6_gre: Revert "ip6_gre: add validation for csum_start"
  net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static
  selftests/bpf: Test XDP bonding nest and unwind
  bonding: Fix negative jump label count on nested bonding
  MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry
  stmmac: dwmac-loongson:Fix missing return value
  iwlwifi: fix printk format warnings in uefi.c
  net: create netdev->dev_addr assignment helpers
  bnxt_en: Fix possible unintended driver initiated error recovery
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - add Mediatek MT7986 & MT8195 wdt support

 - add Maxim MAX63xx

 - drop bd70528 support

 - rewrite ixp4xx to watchdog framework

 - constify static struct watchdog_ops for sl28cpld_wdt, mpc8xxx_wdt and
   tqmx86

 - introduce watchdog_dev_suspend/resume

 - several fixes and improvements

* tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  dt-bindings: watchdog: Add compatible for Mediatek MT7986
  watchdog: ixp4xx: Rewrite driver to use core
  watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate
  watchdog: max63xx_wdt: Add device tree probing
  dt-bindings: watchdog: Add Maxim MAX63xx bindings
  watchdog: mediatek: mt8195: add wdt support
  dt-bindings: reset: mt8195: add toprgu reset-controller header file
  watchdog: tqmx86: Constify static struct watchdog_ops
  watchdog: mpc8xxx_wdt: Constify static struct watchdog_ops
  watchdog: sl28cpld_wdt: Constify static struct watchdog_ops
  watchdog: iTCO_wdt: Fix detection of SMI-off case
  watchdog: bcm2835_wdt: consider system-power-controller property
  watchdog: imx2_wdg: notify wdog core to stop ping worker on suspend
  watchdog: introduce watchdog_dev_suspend/resume
  watchdog: Fix NULL pointer dereference when releasing cdev
  watchdog: only run driver set_pretimeout op if device supports it
  watchdog: bd70528 drop bd70528 support

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - Page ownership tracking between host EL1 and EL2
   - Rely on userspace page tables to create large stage-2 mappings
   - Fix incompatibility between pKVM and kmemleak
   - Fix the PMU reset state, and improve the performance of the virtual
     PMU
   - Move over to the generic KVM entry code
   - Address PSCI reset issues w.r.t. save/restore
   - Preliminary rework for the upcoming pKVM fixed feature
   - A bunch of MM cleanups
   - a vGIC fix for timer spurious interrupts
   - Various cleanups

  s390:
   - enable interpretation of specification exceptions
   - fix a vcpu_idx vs vcpu_id mixup

  x86:
   - fast (lockless) page fault support for the new MMU
   - new MMU now the default
   - increased maximum allowed VCPU count
   - allow inhibit IRQs on KVM_RUN while debugging guests
   - let Hyper-V-enabled guests run with virtualized LAPIC as long as
     they do not enable the Hyper-V "AutoEOI" feature
   - fixes and optimizations for the toggling of AMD AVIC (virtualized
     LAPIC)
   - tuning for the case when two-dimensional paging (EPT/NPT) is
     disabled
   - bugfixes and cleanups, especially with respect to vCPU reset and
     choosing a paging mode based on CR0/CR4/EFER
   - support for 5-level page table on AMD processors

  Generic:
   - MMU notifier invalidation callbacks do not take mmu_lock unless
     necessary
   - improved caching of LRU kvm_memory_slot
   - support for histogram statistics
   - add statistics for halt polling and remote TLB flush requests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
  KVM: Drop unused kvm_dirty_gfn_invalid()
  KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
  KVM: MMU: mark role_regs and role accessors as maybe unused
  KVM: MIPS: Remove a "set but not used" variable
  x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
  KVM: stats: Add VM stat for remote tlb flush requests
  KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
  KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
  KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
  Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
  KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
  kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
  kvm: x86: Increase MAX_VCPUS to 1024
  kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
  KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
  KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
  KVM: s390: index kvm->arch.idle_mask by vcpu_idx
  KVM: s390: Enable specification exception interpretation
  KVM: arm64: Trim guest debug exception handling
  KVM: SVM: Add 5-level page table support for SVM
  ...

Pull dmi fix from Jean Delvare.

Unbreak some existing udev/hwdb modalias matches due to misplaced
product_sku field.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Move product_sku info to the end of the modalias

Pull NTB updates from Jon Mason:
 "Bug fixes and clean-ups for Linux v5.15"

* tag 'ntb-5.15' of git://github.com/jonmason/ntb:
  NTB: switch from 'pci_' to 'dma_' API
  ntb: ntb_pingpong: remove redundant initialization of variables msg_data and spad_data
  NTB: perf: Fix an error code in perf_setup_inbuf()
  NTB: Fix an error code in ntb_msit_probe()
  ntb: intel: remove invalid email address in header comment

Pull remoteproc updates from Bjorn Andersson:

 - move the crash recovery worker to the freezable work queue to avoid
   interaction with other drivers during suspend & resume

 - fix a couple of typos in comments

 - add support for handling the audio DSP on SDM660

 - fix a race between the Qualcomm wireless subsystem driver and the
   associated driver for the RF chip

* tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  remoteproc: q6v5_pas: Add sdm660 ADSP PIL compatible
  dt-bindings: remoteproc: qcom: adsp: Add SDM660 ADSP
  remoteproc: use freezable workqueue for crash notifications
  remoteproc: fix kernel doc for struct rproc_ops
  remoteproc: fix an typo in fw_elf_get_class code comments
  remoteproc: qcom: wcnss: Fix race with iris probe

Pull backlight updates from Lee Jones:
 "Fix-ups:
   - Improve bootloader/kernel device handover

  Bug Fixes:
   - Stabilise backlight in ktd253 driver"

* tag 'backlight-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Improve bootloader/kernel device handover
  backlight: ktd253: Stabilize backlight

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add support for registering devices via MFD cells to Simple MFD (I2C)

  New Drivers:
   - Add support for Renesas Synchronization Management Unit (SMU)

  New Device Support:
   - Add support for N5010 to Intel M10 BMC
   - Add support for Cannon Lake to Intel LPSS ACPI
   - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
   - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86

  New Functionality:
   - Add support for GPIO to Intel LPC ICH
   - Add support for Reset to Texas Instruments TPS65086

  Fix-ups:
   - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
   - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
   - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
   - Pass 'supplied-from' property through axp288_fuel_gauge via swnode
   - Remove unused file entry; MAINTAINERS
   - Make interrupt line optional; tps65086
   - Rename db8500-cpuidle driver symbol; db8500-prcmu
   - Remove support for unused hardware; tqmx86
   - Provide a standard LPC clock frequency for unknown boards; tqmx86
   - Remove unused code; ti_am335x_tscadc
   - Use of_iomap() instead of ioremap(); syscon

  Bug Fixes:
   - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
   - Fix incorrect/misleading frequencies; db8500-prcmu
   - Mitigate namespace clash with other GPIOBASE users"

* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
  mfd: lpc_sch: Rename GPIOBASE to prevent build error
  mfd: syscon: Use of_iomap() instead of ioremap()
  dt-bindings: mfd: Add Broadcom CRU
  mfd: ti_am335x_tscadc: Delete superfluous error message
  mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
  mfd: tqmx86: Add support for TQ-Systems DMI IDs
  mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
  mfd: tqmx86: Fix typo in "platform"
  mfd: tqmx86: Remove incorrect TQMx90UC board ID
  mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
  mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
  mfd/cpuidle: ux500: Rename driver symbol
  mfd: tps65086: Add cell entry for reset driver
  mfd: tps65086: Make interrupt line optional
  dt-bindings: mfd: Convert tps65086.txt to YAML
  MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
  mfd: db8500-prcmu: Handle missing FW variant
  mfd: db8500-prcmu: Rename register header
  mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
  mfd: Don't use irq_create_mapping() to resolve a mapping
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We mostly have various improvements and refactoring all over the place
  but also some interesting new features - like the virtio GPIO driver
  that allows guest VMs to use host's GPIOs. We also have a new/old GPIO
  driver for rockchip - this one has been split out of the pinctrl
  driver.

  Summary:

   - new driver: gpio-virtio allowing a guest VM running linux to access
     GPIO lines provided by the host

   - split the GPIO driver out of the rockchip pin control driver

   - add support for a new model to gpio-aspeed-sgpio, refactor the
     driver and use generic device property interfaces, improve property
     sanitization

   - add ACPI support to gpio-tegra186

   - improve the code setting the line names to support multiple GPIO
     banks per device

   - constify a bunch of OF functions in the core GPIO code and make the
     declaration for one of the core OF functions we use consistent
     within its header

   - use software nodes in intel_quark_i2c_gpio

   - add support for the gpio-line-names property in gpio-mt7621

   - use the standard GPIO function for setting the GPIO names in
     gpio-brcmstb

   - fix a bunch of leaks and other bugs in gpio-mpc8xxx

   - use generic pm callbacks in gpio-ml-ioh

   - improve resource management and PM handling in gpio-mlxbf2

   - modernize and improve the gpio-dwapb driver

   - coding style improvements in gpio-rcar

   - documentation fixes and improvements

   - update the MAINTAINERS entry for gpio-zynq

   - minor tweaks in several drivers"

* tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (35 commits)
  gpio: mpc8xxx: Use 'devm_gpiochip_add_data()' to simplify the code and avoid a leak
  gpio: mpc8xxx: Fix a potential double iounmap call in 'mpc8xxx_probe()'
  gpio: mpc8xxx: Fix a resources leak in the error handling path of 'mpc8xxx_probe()'
  gpio: viperboard: remove platform_set_drvdata() call in probe
  gpio: virtio: Add missing mailings lists in MAINTAINERS entry
  gpio: virtio: Fix sparse warnings
  gpio: remove the obsolete MX35 3DS BOARD MC9S08DZ60 GPIO functions
  gpio: max730x: Use the right include
  gpio: Add virtio-gpio driver
  gpio: mlxbf2: Use DEFINE_RES_MEM_NAMED() helper macro
  gpio: mlxbf2: Use devm_platform_ioremap_resource()
  gpio: mlxbf2: Drop wrong use of ACPI_PTR()
  gpio: mlxbf2: Convert to device PM ops
  gpio: dwapb: Get rid of legacy platform data
  mfd: intel_quark_i2c_gpio: Convert GPIO to use software nodes
  gpio: dwapb: Read GPIO base from gpio-base property
  gpio: dwapb: Unify ACPI enumeration checks in get_irq() and configure_irqs()
  gpiolib: Deduplicate forward declaration in the consumer.h header
  MAINTAINERS: update gpio-zynq.yaml reference
  gpio: tegra186: Add ACPI support
  ...

Pull fuse updates from Miklos Szeredi:

 - Allow mounting an active fuse device. Previously the fuse device
   would always be mounted during initialization, and sharing a fuse
   superblock was only possible through mount or namespace cloning

 - Fix data flushing in syncfs (virtiofs only)

 - Fix data flushing in copy_file_range()

 - Fix a possible deadlock in atomic O_TRUNC

 - Misc fixes and cleanups

* tag 'fuse-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: remove unused arg in fuse_write_file_get()
  fuse: wait for writepages in syncfs
  fuse: flush extending writes
  fuse: truncate pagecache on atomic_o_trunc
  fuse: allow sharing existing sb
  fuse: move fget() to fuse_get_tree()
  fuse: move option checking into fuse_fill_super()
  fuse: name fs_context consistently
  fuse: fix use after free in fuse_read_interrupt()

Pull kgdb updates from Daniel Thompson:
 "Changes for kgdb/kdb this cycle are dominated by a change from Sumit
  that removes as small (256K) private heap from kdb. This is change
  I've hoped for ever since I discovered how few users of this heap
  remained in the kernel, so many thanks to Sumit for hunting these
  down.

  The other change is an incremental step towards SPDX headers"

* tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kernel: debug: Convert to SPDX identifier
  kdb: Rename members of struct kdbtab_t
  kdb: Simplify kdb_defcmd macro logic
  kdb: Get rid of redundant kdb_register_flags()
  kdb: Rename struct defcmd_set to struct kdb_macro
  kdb: Get rid of custom debug heap allocator

This reverts commit b6558434.

Just like with the memcg lock accounting, the kernel test robot reports
a sizeable performance regression for this commit, and while it clearly
does the rigth thing in theory, we'll need to look at just how to avoid
or minimize the performance overhead of the memcg accounting.

People already have suggestions on how to do that, but it's "future
work".

So revert it for now.

[ Note: the first link below is for this same commit but a different
  commit ID, because it's the kernel test robot ended up noticing it in
  Andrew Morton's patch queue ]

Link: https://lore.kernel.org/lkml/20210905132732.GC15026@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/20210907150757.GE17617@xsang-OptiPlex-9020/Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0f12156d.

The kernel test robot reports a sizeable performance regression for this
commit, and while it clearly does the rigth thing in theory, we'll need
to look at just how to avoid or minimize the performance overhead of the
memcg accounting.

People already have suggestions on how to do that, but it's "future
work".

So revert it for now.

Link: https://lore.kernel.org/lkml/20210907150757.GE17617@xsang-OptiPlex-9020/Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 9857a17f.

That commit was completely broken, and I should have caught on to it
earlier.  But happily, the kernel test robot noticed the breakage fairly
quickly.

The breakage is because "try_get_page()" is about avoiding the page
reference count overflow case, but is otherwise the exact same as a
plain "get_page()".

In contrast, "try_get_compound_head()" is an entirely different beast,
and uses __page_cache_add_speculative() because it's not just about the
page reference count, but also about possibly racing with the underlying
page going away.

So all the commentary about how

 "try_get_page() has fallen a little behind in terms of maintenance,
  try_get_compound_head() handles speculative page references more
  thoroughly"

was just completely wrong: yes, try_get_compound_head() handles
speculative page references, but the point is that try_get_page() does
not, and must not.

So there's no lack of maintainance - there are fundamentally different
semantics.

A speculative page reference would be entirely wrong in "get_page()",
and it's entirely wrong in "try_get_page()".  It's not about
speculation, it's purely about "uhhuh, you can't get this page because
you've tried to increment the reference count too much already".

The reason the kernel test robot noticed this bug was that it hit the
VM_BUG_ON() in __page_cache_add_speculative(), which is all about
verifying that the context of any speculative page access is correct.
But since that isn't what try_get_page() is all about, the VM_BUG_ON()
tests things that are not correct to test for try_get_page().
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The variable ret is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joakim Zhang says:

====================
net: stmmac: fix WoL issue

This patch set fixes stmmac not working after system resume back with WoL
active. Thanks a lot for Russell King keeps looking into this issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>