Pull io_uring fix from Jens Axboe:
 "Just a single fix for provided buffer validation"

* tag 'io_uring-6.11-20240823' of git://git.kernel.dk/linux:
  io_uring/kbuf: sanitize peek buffer setup

Pull ACPI fix from Rafael Wysocki:
 "Fix backlight control on a Dell All In One system where a backlight
  controller board is attached to a UART port and the dell-uart
  backlight driver binds to it, but the backlight is actually controlled
  by other means (Hans de Goede)"

* tag 'acpi-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO
  platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()
  ACPI: video: Add Dell UART backlight controller detection

Pull thermal control fixes from Rafael Wysocki:
 "These fix error handling in the thermal debug code and OF node
  reference leaks in the thermal OF driver.

  Specifics:

   - Use IS_ERR() in checks of debugfs_create_dir() return value instead
     of checking it against NULL in the thermal debug code (Yang Ruibin)

   - Fix three OF node reference leaks in thermal_of (Krzysztof
     Kozlowski)"

* tag 'thermal-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: of: Fix OF node leak in of_thermal_zone_find() error paths
  thermal: of: Fix OF node leak in thermal_of_zone_register()
  thermal: of: Fix OF node leak in thermal_of_trips_init() error path
  thermal/debugfs: Fix the NULL vs IS_ERR() confusion in debugfs_create_dir()

Pull mmc fixes from Ulf Hansson:
 "MMC core:
   - Fix NULL dereference for mmc_test on allocation failure

  MMC host:
   - dw_mmc: Fix support for deferred probe for biu/ciu clocks
   - mtk-sd: Fix CMD8 support when fragile tuning settings"

* tag 'mmc-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmc_test: Fix NULL dereference on allocation failure
  mmc: dw_mmc: allow biu and ciu clocks to defer
  mmc: mtk-sd: receive cmd8 data when hs400 tuning fail

Pull spi fixes from Mark Brown:
 "A small collection of fixes here, all driver specific and none of them
  too serious. For whatever reason runtime PM seems to have been causing
  a bunch of issues recently"

* tag 'spi-fix-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: Move PM runtime handling to the glue drivers
  spi: pxa2xx: Do not override dev->platform_data on probe
  spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register
  spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resume
  spi: zynqmp-gqspi: Scale timeout by data size

Pull power sequencing fix from Bartosz Golaszewski:

 - request the wlan-enable GPIO "as-is" to fix an issue with the wifi
   module being already powered up before linux boots

* tag 'pwrseq-fixes-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  power: sequencing: request the WLAN enable GPIO as-is

Pull pmdomain fixes from Ulf Hansson:

 - imx: Remove duplicated clocks for scu power domain

 - imx: Wait for SSAR to complete power-on for i.MX93 power domain

* tag 'pmdomain-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: imx: wait SSAR when i.MX93 power domain on
  pmdomain: imx: scu-pd: Remove duplicated clocks

Pull ata fixes from Damien Le Moal:

 - Fix the max segment size and max number of segments supported by the
   pata_macio driver to fix issues with BIO splitting leading to an
   overflow of the adapter DMA table (from Michael)

 - Related to the previous fix, change BUG_ON() calls for incorrect
   command buffer segmentation into WARN_ON() and an error return (from
   Michael)

* tag 'ata-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: pata_macio: Use WARN instead of BUG
  ata: pata_macio: Fix DMA table overflow

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
     call before RX napi enable

  Current release - new code bugs:

   - net/mlx5e: fix page leak and incorrect header release w/ HW GRO

  Previous releases - regressions:

   - udp: fix receiving fraglist GSO packets

   - tcp: prevent refcount underflow due to concurrent execution of
     tcp_sk_exit_batch()

  Previous releases - always broken:

   - ipv6: fix possible UAF when incrementing error counters on output

   - ip6: tunnel: prevent merging of packets with different L2

   - mptcp: pm: fix IDs not being reusable

   - bonding: fix potential crashes in IPsec offload handling

   - Bluetooth: HCI:
      - MGMT: add error handling to pair_device() to avoid a crash
      - invert LE State quirk to be opt-out rather then opt-in
      - fix LE quote calculation

   - drv: dsa: VLAN fixes for Ocelot driver

   - drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings

   - drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192

  Misc:

   - netpoll: do not export netpoll_poll_[disable|enable]()

   - MAINTAINERS: update the list of networking headers"

* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
  s390/iucv: Fix vargs handling in iucv_alloc_device()
  net: ovs: fix ovs_drop_reasons error
  net: xilinx: axienet: Fix dangling multicast addresses
  net: xilinx: axienet: Always disable promiscuous mode
  MAINTAINERS: Mark JME Network Driver as Odd Fixes
  MAINTAINERS: Add header files to NETWORKING sections
  MAINTAINERS: Add limited globs for Networking headers
  MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
  MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
  octeontx2-af: Fix CPT AF register offset calculation
  net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
  net: ngbe: Fix phy mode set to external phy
  netfilter: flowtable: validate vlan header
  bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
  ipv6: prevent possible UAF in ip6_xmit()
  ipv6: fix possible UAF in ip6_finish_output2()
  ipv6: prevent UAF in ip6_send_skb()
  netpoll: do not export netpoll_poll_[disable|enable]()
  selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
  udp: fix receiving fraglist GSO packets
  ...

Merge tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Eliminate the fdtoverlay command duplication in scripts/Makefile.lib

 - Fix 'make compile_commands.json' for external modules

 - Ensure scripts/kconfig/merge_config.sh handles missing newlines

 - Fix some build errors on macOS

* tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: fix typos "prequisites" to "prerequisites"
  Documentation/llvm: turn make command for ccache into code block
  kbuild: avoid scripts/kallsyms parsing /dev/null
  treewide: remove unnecessary <linux/version.h> inclusion
  scripts: kconfig: merge_config: config files: add a trailing newline
  Makefile: add $(srctree) to dependency of compile_commands.json target
  kbuild: clean up code duplication in cmd_fdtoverlay

iucv_alloc_device() gets a format string and a varying number of
arguments. This is incorrectly forwarded by calling dev_set_name() with
the format string and a va_list, while dev_set_name() expects also a
varying number of arguments.

Symptoms:
Corrupted iucv device names, which can result in log messages like:
sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952'

Fixes: 4452e8ef ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is
"OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1,
which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION".

And as Adrian tested, without the patch, adding flow to drop packets
results in:

drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_ACTION_ERROR

With the patch, the same results in:

drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_LAST_ACTION

Fix this by initializing ovs_drop_reasons with index.

Fixes: 9d802da4 ("net: openvswitch: add last-action drop reason")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 disable BH when collecting stats via hardware offload to ensure
         concurrent updates from packet path do not result in losing stats.
         From Sebastian Andrzej Siewior.

Patch #2 uses write seqcount to reset counters serialize against reader.
         Also from Sebastian Andrzej Siewior.

Patch #3 ensures vlan header is in place before accessing its fields,
         according to KMSAN splat triggered by syzbot.

* tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: flowtable: validate vlan header
  netfilter: nft_counter: Synchronize nft_counter_reset() against reader.
  netfilter: nft_counter: Disable BH in nft_counter_offload_stats().
====================

Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sean Anderson says:

====================
net: xilinx: axienet: Multicast fixes and improvements [part]
====================

First two patches of the series which are fixes.

Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Terminating for_each_available_child_of_node() loop requires dropping OF
node reference, so bailing out on errors misses this.  Solve the OF node
reference leak with scoped for_each_available_child_of_node_scoped().

Fixes: 3fd6d6e2 ("thermal/of: Rework the thermal device tree initialization")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240814195823.437597-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

thermal_of_zone_register() calls of_thermal_zone_find() which will
iterate over OF nodes with for_each_available_child_of_node() to find
matching thermal zone node.  When it finds such, it exits the loop and
returns the node.  Prematurely ending for_each_available_child_of_node()
loops requires dropping OF node reference, thus success of
of_thermal_zone_find() means that caller must drop the reference.

Fixes: 3fd6d6e2 ("thermal/of: Rework the thermal device tree initialization")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240814195823.437597-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Terminating for_each_child_of_node() loop requires dropping OF node
reference, so bailing out after thermal_of_populate_trip() error misses
this.  Solve the OF node reference leak with scoped
for_each_child_of_node_scoped().

Fixes: d0c75fa2 ("thermal/of: Initialize trip points separately")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240814195823.437597-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This typo in scripts/Makefile.build has been present for more than 20
years. It was accidentally copy-pasted to other scripts/Makefile.* files.
Fix them all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

Simon Horman says:

====================
MAINTAINERS: Networking updates

This series includes Networking-related updates to MAINTAINERS.

* Patches 1-4 aim to assign header files with "*net*' and '*skbuff*'
  in their name to Networking-related sections within Maintainers.

  There are a few such files left over after this patches.
  I have to sent separate patches to add them to SCSI SUBSYSTEM
  and NETWORKING DRIVERS (WIRELESS) sections [1][2].

  [1] https://lore.kernel.org/linux-scsi/20240816-scsi-mnt-v1-1-439af8b1c28b@kernel.org/
  [2] https://lore.kernel.org/linux-wireless/20240816-wifi-mnt-v1-1-3fb3bf5d44aa@kernel.org/

* Patch 5 updates the status of the JME driver to 'Odd Fixes'
====================

Link: https://patch.msgid.link/20240821-net-mnt-v2-0-59a5af38e69d@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This driver only appears to have received sporadic clean-ups, typically
part of some tree-wide activity, and fixes for quite some time.  And
according to the maintainer, Guo-Fu Tseng, the device has been EOLed for
a long time (see Link).

Accordingly, it seems appropriate to mark this driver as odd fixes.

Cc: Moon Yeounsu <yyyynoom@gmail.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Link: https://lore.kernel.org/netdev/20240805003139.M94125@cooldavid.org/Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" or
"skbuff" in their name.

This patch adds a number of such files to the NETWORKING DRIVERS
and NETWORKING [GENERAL] sections.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This aims to add limited globs to improve the coverage of header files
in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections.

It is done so in a minimal way to exclude overlap with other sections.
And so as not to require "X" entries to exclude files otherwise
matched by these new globs.

While imperfect, due to it's limited nature, this does extend coverage
of header files by these sections. And aims to automatically cover
new files that seem very likely belong to these sections.

The include/linux/netdev* glob (both sections)
+ Subsumes the entries for:
  - include/linux/netdevice.h
+ Extends the sections to cover
  - include/linux/netdevice_xmit.h
  - include/linux/netdev_features.h

The include/uapi/linux/netdev* globs: (both sections)
+ Subsumes the entries for:
  - include/linux/netdevice.h
+ Extends the sections to cover
  - include/linux/netdev.h

The include/linux/skbuff* glob (NETWORKING [GENERAL] section only):
+ Subsumes the entry for:
  - include/linux/skbuff.h
+ Extends the section to cover
  - include/linux/skbuff_ref.h

A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL]
section. Although it would subsume the entry for
include/uapi/linux/net_namespace.h, which is fine, it would also extend
coverage to:
- include/uapi/linux/net_dropmon.h, which belongs to the
   NETWORK DROP MONITOR section
- include/uapi/linux/net_tstamp.h which, as per an earlier patch in this
  series, belongs to the SOCKET TIMESTAMPING section
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.

Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.

It seems that sonet.h is included in ATM related source files,
and thus that ATM is the most relevant section for these files.

Cc: Chas Williams <3chas3@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

PCI and platform buses have different defaults for runtime PM.
In particular PCI probe is assumed to be called when PM runtime
is enabled by the PCI core. In this case if we try enable it again
the PM runtime complaints with

    pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable!

Fix this by moving PM runtime handling from the SPI PXA2xx core
to the glue drivers.

Fixes: cc160697 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037f ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9 ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The platform_data field may be supplied by legacy board code.
In other cases we override it, and module remove and probe cycle
will crash the kernel since it will carry a stale pointer.

Fix this by supplying a third argument to the pxa2xx_spi_probe()
and avoid overriding dev->platform_data.
Reported-by: Hao Ma <hao.ma@intel.com>
Fixes: cc160697 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037f ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9 ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.

Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.

Fixes: bc35e28a ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The current implementation incorrectly sets the mode bit of the PHY chip.
Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
configuration nibble of a LED- it should be set independently of the
index of the LED being configured.
As a consequence, the RTL8211F LED control is actually operating in Mode A.
Fix the error by or-ing final register value to write with a const-value of
RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.

Fixes: 17784801 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Sava Jakovljev <savaj@meyersound.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COMSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The MAC only has add the TX delay and it can not be modified.
MAC and PHY are both set the TX delay cause transmission problems.
So just disable TX delay in PHY, when use rgmii to attach to
external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers.
And it is does not matter to internal phy.

Fixes: bc2426d7 ("net: ngbe: convert phylib to phylink")
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Ensure there is sufficient room to access the protocol field of the
VLAN header, validate it once before the flowtable lookup.

=====================================================
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
 nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
 nf_ingress net/core/dev.c:5440 [inline]

Fixes: 4cd91f7c ("netfilter: flowtable: add vlan support")
Reported-by: syzbot+8407d9bb88cd4c6bf61a@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-08-20 (ice)

This series contains updates to ice driver only.

Maciej fixes issues with Rx data path on architectures with
PAGE_SIZE >= 8192; correcting page reuse usage and calculations for
last offset and truesize.

Michal corrects assignment of devlink port number to use PF id.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: use internal pf id instead of function number
  ice: fix truesize operations for PAGE_SIZE >= 8192
  ice: fix ICE_LAST_OFFSET formula
  ice: fix page reuse when PAGE_SIZE is over 8k
====================

Link: https://patch.msgid.link/20240820215620.1245310-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT
code path.  This should have been removed when we let the page pool
handle the DMA mapping.  This bug causes the warning:

WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100
CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G        W          6.8.0-1010-gcp #11-Ubuntu
Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024
RIP: 0010:iommu_dma_unmap_page+0xd5/0x100
Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9
RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c
R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000
R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002
FS:  0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0
? show_regs+0x6d/0x80
? __warn+0x89/0x150
? iommu_dma_unmap_page+0xd5/0x100
? report_bug+0x16a/0x190
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? iommu_dma_unmap_page+0xd5/0x100
? iommu_dma_unmap_page+0x35/0x100
dma_unmap_page_attrs+0x55/0x220
? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f
bnxt_rx_xdp+0x237/0x520 [bnxt_en]
bnxt_rx_pkt+0x640/0xdd0 [bnxt_en]
__bnxt_poll_work+0x1a1/0x3d0 [bnxt_en]
bnxt_poll+0xaa/0x1e0 [bnxt_en]
__napi_poll+0x33/0x1e0
net_rx_action+0x18a/0x2f0

Fixes: 578fcfd2 ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240820203415.168178-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
ipv6: fix possible UAF in output paths

First patch fixes an issue spotted by syzbot, and the two
other patches fix error paths after skb_expand_head()
adoption.
====================

Link: https://patch.msgid.link/20240820160859.3786976-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If skb_expand_head() returns NULL, skb has been freed
and the associated dst/idev could also have been freed.

We must use rcu_read_lock() to prevent a possible UAF.

Fixes: 0c9f227b ("ipv6: use skb_expand_head in ip6_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.

We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive.

Fixes: 5796015f ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported an UAF in ip6_send_skb() [1]

After ip6_local_out() has returned, we no longer can safely
dereference rt, unless we hold rcu_read_lock().

A similar issue has been fixed in commit
a688caa3 ("ipv6: take rcu lock in rawv6_send_hdrinc()")

Another potential issue in ip6_finish_output2() is handled in a
separate patch.

[1]
 BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530

CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:93 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
  rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588
  rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x1a6/0x270 net/socket.c:745
  sock_write_iter+0x2dd/0x400 net/socket.c:1160
 do_iter_readv_writev+0x60a/0x890
  vfs_writev+0x37c/0xbb0 fs/read_write.c:971
  do_writev+0x1b1/0x350 fs/read_write.c:1018
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f936bf79e79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79
RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004
RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8
 </TASK>

Allocated by task 6530:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  unpoison_slab_object mm/kasan/common.c:312 [inline]
  __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338
  kasan_slab_alloc include/linux/kasan.h:201 [inline]
  slab_post_alloc_hook mm/slub.c:3988 [inline]
  slab_alloc_node mm/slub.c:4037 [inline]
  kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044
  dst_alloc+0x12b/0x190 net/core/dst.c:89
  ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670
  make_blackhole net/xfrm/xfrm_policy.c:3120 [inline]
  xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313
  ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257
  rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x1a6/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597
  ___sys_sendmsg net/socket.c:2651 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Freed by task 45:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
  poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
  __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
  kasan_slab_free include/linux/kasan.h:184 [inline]
  slab_free_hook mm/slub.c:2252 [inline]
  slab_free mm/slub.c:4473 [inline]
  kmem_cache_free+0x145/0x350 mm/slub.c:4548
  dst_destroy+0x2ac/0x460 net/core/dst.c:124
  rcu_do_batch kernel/rcu/tree.c:2569 [inline]
  rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843
  handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
  __do_softirq kernel/softirq.c:588 [inline]
  invoke_softirq kernel/softirq.c:428 [inline]
  __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
  sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
  asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702

Last potentially related work creation:
  kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
  __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541
  __call_rcu_common kernel/rcu/tree.c:3106 [inline]
  call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210
  refdst_drop include/net/dst.h:263 [inline]
  skb_dst_drop include/net/dst.h:275 [inline]
  nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline]
  nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485
  ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
  nf_hook include/linux/netfilter.h:269 [inline]
  __ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143
  ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153
  ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959
  rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588
  rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x1a6/0x270 net/socket.c:745
  sock_write_iter+0x2dd/0x400 net/socket.c:1160
 do_iter_readv_writev+0x60a/0x890

Fixes: 06254914 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-2-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

netpoll_poll_disable() and netpoll_poll_enable() are only used
from core networking code, there is no need to export them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240820162053.3870927-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Source the ethtool library from the correct path and avoid the following
error:

./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory

Fixes: 40d269c0 ("selftests: forwarding: Move several selftests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>