"ethernet.h" is included in three files but only "rtw_recv.c" using two macros
defined in "ethernet.h", so move used macros in "rtw_recv.c" and
remove "include/ethernet.h" header file and inclusion of this header file.

v2:
First version of this patch failed to apply.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

My static checker found some slightly inaccurate format codes in printf
calls in comedi_fops.c and drivers/comedi_bond.c.  It may be slightly
pedantic to change them, but using the correctly corresponding format
codes is probably a good idea.  All but one were unsigned ints that were
formatted with %i, change these to %u, and one was an int formatted with
%u, we want to format this with %d.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch displays below errors for bypasslib/bp_ioctl.h file

	 ERROR: Macros with complex values should be enclosed in parenthesis
Hence added parenthesis for macros with complex values.
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1) Deleted  bp_proc_create() declaration from bp_mod.h,
because it is declared as static in bpctl_mod.c and not used anywhere.

2) checkpatch warns about
     WARNING: externs should be avoided in .c files

because we have function declarations in bptcl_mod.c,These
functions are not used anywhere else so made them static.
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It looks like lustre_generic_file_{read,write} are a holdover from
2.6.19 where generic_file_aio_read() replaced generic_file_readv()
and cross-kernel interoperability was required for some period of
time. Lustre has since removed support for those older kernels, but
it looks like the wrappers were not deleted at that time. This patch
will delete them.

Pass &iocb->ki_pos as the last argument for these functions instead
of crw_pos, since this is the convention for other callers.  Verify
that this is the same as the current crw_pos argument.  This code can
likely be cleaned up further in a later patch.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers and cleanups for IIO in the 3.15 cycle.

New drivers:
* si7005 relative humidity and temperature sensor
* Lite-on ltr501 ambient light and proximity sensor

Cleanups
* Clean up some dead comments in max1363
* Drop some obsolete variables in adjd_s311 and tcs3472 left over from
  the introduction of iio_push_to_buffers_with_timestamp.
* Drop some unneeded linux/init.h includes
* Squish a sparse warning in mpl3115 by correctly specifying a be32 variable.
* A number of cleanups and fixes for sca3000
* Drop an unneed checks in mxs-lradc, ad7303 and adis16400.
* Drop a platform_set_drvdata in viperboard after the only use of it was
  removed during a devm conversion.
* Add a missing device name for ak8975 to comply with the ABI.
* Put mpu6050 into the IMU menu as it slipped out into the main menu.
* Fix a typo and some comment formatting in mpu6050.
* Document at91 ADC clock properties.

Do not call kfree() till timer function is finished.

[This was found using grep. Compilation tested only]
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These debugging macros are seldom used for debugging once the driver
is working. If routine tracing is needed, it can be added on an
individual basis.

In a few cases, removal of the exit macro left a bare label. In these
cases, a go to that label was replaced by a return.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver contains a macro that gets the next item in a linked list.
Replace it with a simple copy of the pointer.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver has its own implementation of a "container_of" macro. It
is replaced with the standard container_of version. Most of these
are a straight one-to-one replacement; however, a few of the instances
referred to the member of a union. Those were replaced with the
struct that is part of that union.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The headers for this driver contain a number of unused structs and macros
that are removed. File include/ioctl_cfg80211.h is now empty and was
deleted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After the previous cleanups, file hal/odm_interface.c is now empty. It
is hereby deleted, and removed from Makefile.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This wrapper is replaced with a simple memcmp(). As the wrapper inverts the
logic of memcmp(), care needed to be taken.

This patch also adds one include of vmalloc.h that was missed in a previous
patch.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding a MAINTAINERS entry with content from the README.
Move the TODO items from the README to a separate TODO file.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not call kfree() till timer function is finished.

[This was found using grep. Compiled tested only]
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Joe Perches <joe@perches.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"ip.h" is included in four files but not being used, so
remove "include/ip.h" header file and inclusion of this header file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"if_ether.h" is included in three files but not being used, so
remove "include/if_ether.h" header file and inclusion of this header file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- WARNING: missing space after return type
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- WARNING: Multiple spaces after return type
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Warning:
 - Unnecessary space after function pointer name
 - quoted string split across lines
 - fix alignment issues

Error:
 - return is not a function, parentheses are not required
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Whitespace between #define keyword and BINDER_* constants are space in
some point and tab in some point. Using space or tab is just writer's
choice. But, let's use them more consistently.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We allocate bdev and then krealloc the devs pointer in order to add bdev
at the end of the devpriv->devs array list.  But if for some reason this
krealloc fails, we need to free bdev before returning an error otherwise
this memory is leaked.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are references to four undefined Kconfig macros in the code.
Remove these as the checks for them will always evaluate to false.

There are additional cleanups possible now, but I'll gladly leave those
to people that are actually familiar with the code.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Two Kconfig entries for this driver default to (uppercase) "Y". But in
Kconfig (lowercase) "y" is a magic symbol. "Y" is an ordinary symbol.
As "Y" is never set these Kconfig symbols will also not be set by
default.

So use "default y" here, as was clearly intended.
Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed multiple coding style errors and warnings
wifi.h:1077: WARNING: please, no space before tabs
wifi.h:762: WARNING: missing space after struct definition
wifi.h:972: WARNING: please, no spaces at the start of a line
wifi.h:1825: WARNING: Unnecessary space after function pointer name
wifi.h:1826: ERROR: "foo * bar" should be "foo *bar"
wifi.h:1099: WARNING: missing space after return type
wifi.h:1320: ERROR: Macros with complex values should be enclosed in parenthesis
wifi.h:1758: WARNING: Multiple spaces after return type
wifi.h:1855: ERROR: code indent should use tabs where possible
wifi.h:2303: ERROR: space prohibited after that open parenthesis '('
wifi.h:2408: ERROR: spaces required around that '=' (ctx:VxV)
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 2397c6e0 entitled "staging: r8188eu:
Remove wrappers around vmalloc and vzalloc" and
commit: 03bd6aea entitled "staging: r8188eu:
Remove wrappers around vfree" failed to add the header file needed
to provide vzalloc and vfree.

This problem was reported by the kbuild test robot.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In kernel 3.11 O_TMPFILE was introduced, but the open flag value
conflicts with the O_LOV_DELAY_CREATE flag 020000000 previously used
by Lustre-aware applications.  O_LOV_DELAY_CREATE allows applications
to defer file layout and object creation from open time (the default)
until it can instead be specified by the application using an ioctl.

Instead of trying to find a non-conflicting O_LOV_DELAY_CREATE flag
or define a Lustre-specific flag that isn't of use to most/any other
filesystems, use (O_NOCTTY|FASYNC) as the new value.  These flags
are not meaningful for newly-created regular files and should be
OK since O_LOV_DELAY_CREATE is only meaningful for new files.

I looked into using O_ACCMODE/FMODE_WRITE_IOCTL, which allows calling
ioctl() on the minimally-opened fd and is close to what is needed,
but that doesn't allow specifying the actual read or write mode for
the file, and fcntl(F_SETFL) doesn't allow O_RDONLY/O_WRONLY/O_RDWR
to be set after the file is opened.

Lustre-change: http://review.whamcloud.com/8312
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4209Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An early return from llog_cat_process_cb() was leaking the llog
handle. Fix this by not doing that.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/7847
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4054Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch separates ACL and XATTR caches, so that
when updating an ACL only LOOKUP lock is needed and
when updating another XATTR only XATTR lock is needed.

This patch also reverts XATTR cache support for setxattr
because client performing REINT under even PR lock
will deadlock if an active server operation (like unlink)
attempts to cancel all locks, and setxattr has to wait
for it (MDC max-in-flight is 1).

This patch disables the r/o cache if the data is
unreasonably large (larger than maximum single EA
size).
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/7208
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3669Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the atomic_open callback. We should instantiate
negative dentry. Else will got sanity:183 failed.
Signed-off-by: yang sheng <yang.sheng@intel.com>
Reviewed-on: http://review.whamcloud.com/8110
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3228Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Callers of ll_splice_alias() should not assign the returned pointer to
the dentry since it can be an err pointer. Fixed the above bug using a
temporary dentry pointer. This temporary pointer is assigned to dentry
only if ll_splice_alias has not returned an err pointer.
Signed-off-by: Swapnil Pimpale <spimpale@ddn.com>
Reviewed-on: http://review.whamcloud.com/7460
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3807Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* during a file lov object initialization, we need protect the access
  and change of its subobj->coh_parent, since it could be another
  layout change race there, which makes an unreferenced lovsub obj in
  the site object hash table.

* dump lovsub objects in the site if the lovsub device reference > 0
  during its finalization phase.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/6105
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1480Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is to pull in the lustre fixes so that others can continue to work
on updating the lustre codebase, as well as resolve some merge issues
with the ion and ocproto drivers to keep linux-next happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-3.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second round of IIO fixes for the 3.14 cycle.

Another mixed bag, including some that were not in round 1 because
they applied to elements that went in during the merge window whereas
round 1 predated that.  I have been effectively out of action for 3 weeks
so will take a little while to catch up with my backlog.

* mag3110 - report busy in read_raw / write_raw when buffered capture
  is underway to avoid either changing the characteristics of the capture or
  causing capture issues by reading data destined for the buffer.
* mag3110 - fix a failure to specify leading zeros when formatting a decimal
  number.
* lradc - fix a buffer overflow and incorrect reporting of scale for voltage
  channel 15
* lradc - drop some scale_available attributes for elements that don't actually
  exist.  These could otherwise cause some interesting issues for userspace.
* ad799x - a typo in the events information mask resulted in some nasty crashes
  on failed probes.
* ak8975 - fix scale attribute output to avoid incorrect intepretation of
  readings in userspace.
* adis16400 - make sure the timestamp is the last element in all channel_spec
  arrays as this assumption is made by the buffer filling code, but was not
  true previously.
* bma180 - correctly use modifiers to distinguish the channels rather than
  indexes.  This brings the abi inline with the standard option for 3 axis
  accelerometers.
* max1363 - use devm_regulator_get_optional instead of the non optional case
  to allow the device to successfully probe when a regulator is not specified.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In kernel version 3.13, devm_regulator_get() may return no error
if a regulator is undeclared. regulator_get_voltage() will return
-EINVAL if this happens. This causes the driver to fail loading if
the vref regulator is not declared.

Since vref is optional, call devm_regulator_get_optional instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This driver was not complying with the ABI and the purpose of this patch
is to bring it inline so that userspace will correctly identify the channels.

Should use channel modifiers (X/Y/Z), not channel indices
timestamp channel has scan index 3, not 4
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Kravchenko Oleksandr <x0199363@ti.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This is necessary since timestamp is calculated as the last element
in iio_compute_scan_bytes().

Without this fix any userspace code reading the layout of the buffer via
sysfs will incorrectly interpret the data leading some nasty corruption.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch add device name.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>