The current driver uses a value from register TEST_O as the original
value for register TEST_I, though, the value is overwritten by "param",
so there is a bug that the original value isn't no longer used.

The value of TEST_O[7:0] should be masked with "mask", replaced with
"param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value.

Fixes: c6d9b132 ("phy: socionext: add PCIe PHY driver support")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The CSI dphy found for example on the rk3326/px30 and rk3368 is based
on an IP design from Innosilicon. Add a driver for it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210610212935.3520341-3-heiko@sntech.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Some Rockchip SoCs like the rk3368, rk3326, px30 use a CSI dphy
based on an Innosilicon IP. Add a binding for them.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210610212935.3520341-2-heiko@sntech.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

The pointer cfg is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210609113901.185230-1-colin.king@canonical.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The driver adds support for generic CAN transceivers. Currently
the modes supported by this driver are standby and normal modes for TI
TCAN1042 and TCAN1043 CAN transceivers.

The transceiver is modelled as a phy with pins controlled by gpios, to put
the transceiver in various device functional modes. It also gets the phy
attribute max_link_rate for the usage of CAN drivers.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210510051006.11393-4-a-govindraju@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add binding documentation for TI TCAN104x CAN transceivers.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210510051006.11393-3-a-govindraju@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In some subsystems (eg. CAN, SPI), the max link rate supported can be less
than 1 Mbps and if the unit for max_link_rate is Mbps then it can't be
used. Therefore, leave the decision of units to be used, to the producer
and consumer.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210510051006.11393-2-a-govindraju@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210408115530.15673-1-heying24@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210408114850.14422-1-heying24@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210408090806.247325-1-heying24@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210408090808.247368-1-heying24@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Changeset 6569d838 ("dt-bindings: phy: convert phy-mvebu-utmi to YAML schema")
renamed: Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
to: Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml.

Update its cross-reference accordingly.

Fixes: 6569d838 ("dt-bindings: phy: convert phy-mvebu-utmi to YAML schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9342a88ed44726a1cc405470c834d746d4d0524c.1622648507.git.mchehab+huawei@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210520135132.37628-1-yuehaibing@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Current dts files with Rockchip 'usbphy' nodes are manually verified.
In order to automate this process rockchip-usb-phy.txt has to be
converted to YAML.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210518165658.12764-2-jbx6244@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The RK3308 SoC uses a slightly different USB phy than other Rockchip
parts.
This commit adds support for that phy.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20210514150044.2099298-3-t.schramm@manjaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The RK3308 features a slightly different USB phy than other Rockchip SoCs.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210514150044.2099298-2-t.schramm@manjaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch adds support for optional vbus regulator.
It is managed on phy_power_on/off calls and may be needed for host mode.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20210517120821.26466-3-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch adds vbus-supply optional property to phy sub-nodes using
connector node.
A regulator for USB VBUS may be needed for host mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20210517120821.26466-2-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is error log in clk_bulk_prepare/enable()
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1621229841-22984-1-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

A * has been added at the starting of new line
The closing */ of multi line comment shifted to new line
This is done to maintain code uniformity.
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Link: https://lore.kernel.org/r/20210428165515.o47o5awzdxirxkqi@kewl-virtual-machineSigned-off-by: Vinod Koul <vkoul@kernel.org>

The PCIe PHY version used in SDX55 is v4.20 which has different register
offsets compared to the v4.0x PHYs. So separate register defines are
used for init sequence and PHY status.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210427065400.18958-4-manivannan.sadhasivam@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

In preparation of the support for v4.20 PCIe PHY in SDX55, use a
separate "phy_status" field for the status bit offset. This is needed
because, the v4.20 PHY uses a different offset for the PHY Status.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210427065400.18958-3-manivannan.sadhasivam@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add devicetree binding for PCIe PHY found in Qcom SDX55 platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210427065400.18958-2-manivannan.sadhasivam@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The rest of the code refers to version 1.2 of the MIPI D-PHY
specification. But this comment refers to 2.1, while a sub comment of
the function refers to 1.2 again. Replace 2.1 with 1.2.
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Link: https://lore.kernel.org/r/20210421041740.8451-1-sebastian.fricke@posteo.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

For a single PHY, there's no reason to have a phy-names entry in DT.
The DT specific get functions allow for this already, but devm_phy_get()
WARNs in this case. Other subsystems also don't warn in their get
functions. Let's drop the WARN for DT case in devm_phy_get().

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210414135525.3535787-1-robh@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Based on code from downstream Codeaurora tree. The ipq60xx has one gen3
PCIe port.
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/e24f2bedb8a7346018b58136bcb0a4004d8677a0.1620203062.git.baruch@tkos.co.ilSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document qcom,pcie-ipq6018. This is similar to the ipq8074 with a few
different clock sources, and one additional reset.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/fd732635f4ad64263e361ce98af2944bfbd513ef.1620203062.git.baruch@tkos.co.ilSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add ipq6018 qmp phy device for the single PCIe serdes lane on IPQ60xx
SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/be83d8580942ab9d141dffff4e4f33f34a4c9ed9.1620203062.git.baruch@tkos.co.ilSigned-off-by: Vinod Koul <vkoul@kernel.org>

The way of printing the pointer address for the 'port_base'
address got into compile warnings on some architectures
[-Wpointer-to-int-cast]. Instead of use '%08x' and cast
to an 'unsigned int' just make use of '%px' and avoid the
cast. To avoid not really needed driver verbosity on normal
behaviour change also from 'dev_info' to 'dev_dbg'.

Fixes: d87da323 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210508070930.5290-7-sergio.paracuellos@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Make dependent on PCI_MT7621 configuration option and mark
this pci phy configuration as bool which has more sense.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210508070930.5290-6-sergio.paracuellos@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

After use the clock apis and avoid custom architecture
code this driver can properly be enabled for COMPILE_TEST.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210508070930.5290-5-sergio.paracuellos@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

MT7621 SoC clock driver has already mainlined in
'commit 48df7a26 ("clk: ralink: add clock driver for mt7621 SoC")'
This allow us to properly use kernel clock apis to get
the clock frequency needed for the phy configuration
instead of use custom architecture code to do the same.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210508070930.5290-4-sergio.paracuellos@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

MT7621 SoC clock driver has already mainlined in
'commit 48df7a26 ("clk: ralink: add clock driver for mt7621 SoC")'
Hence update schema with the add of the entries related to
clock. Since until now things were not properly being done
we mark also 'clock' as required in the binding since this
will be now the only way to properly retrieve frequency to be
able to make a correct configuration of the PCIe phy registers.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210508070930.5290-3-sergio.paracuellos@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Convert the Renesas R-Car Gen3 PCIe PHY Device Tree binding
documentation to json-schema.

Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/0301c3a7dae9afde115b6437a11c23ab85cb8b75.1620648490.git.geert+renesas@glider.beSigned-off-by: Vinod Koul <vkoul@kernel.org>

Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.

It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:

    drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
    static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
                        ^

Fix it.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Bit later than usual, I queued them all up on Friday then promptly
  forgot to write the pull request email. This is mainly amdgpu fixes,
  with some radeon/msm/fbdev and one i915 gvt fix thrown in.

  amdgpu:
   - MPO hang workaround
   - Fix for concurrent VM flushes on vega/navi
   - dcefclk is not adjustable on navi1x and newer
   - MST HPD debugfs fix
   - Suspend/resumes fixes
   - Register VGA clients late in case driver fails to load
   - Fix GEM leak in user framebuffer create
   - Add support for polaris12 with 32 bit memory interface
   - Fix duplicate cursor issue when using overlay
   - Fix corruption with tiled surfaces on VCN3
   - Add BO size and stride check to fix BO size verification

  radeon:
   - Fix off-by-one in power state parsing
   - Fix possible memory leak in power state parsing

  msm:
   - NULL ptr dereference fix

  fbdev:
   - procfs disabled warning fix

  i915:
   - gvt: Fix a possible division by zero in vgpu display rate
     calculation"

* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Use device specific BO size & stride check.
  drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
  drm/amd/pm: initialize variable
  drm/radeon: Avoid power table parsing memory leaks
  drm/radeon: Fix off-by-one power_state index heap overwrite
  drm/amd/display: Fix two cursor duplication when using overlay
  drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
  fbmem: Mark proc_fb_seq_ops as __maybe_unused
  drm/msm/dpu: Delete bonkers code
  drm/i915/gvt: Prevent divided by zero when calculating refresh rate
  amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
  drm/amdgpu: Register VGA clients after init can no longer fail
  drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
  drm/amdgpu: fix r initial values
  drm/amd/display: fix wrong statement in mst hpd debugfs
  amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
  amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
  drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
  drm/amd/display: Reject non-zero src_y and src_x for video planes

Pull block fix from Jens Axboe:
 "Turns out the bio max size change still has issues, so let's get it
  reverted for 5.13-rc1. We'll shake out the issues there and defer it
  to 5.14 instead"

* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
  Revert "bio: limit bio max size"

Pull cifs fixes from Steve French:
 "Three small SMB3 chmultichannel related changesets (also for stable)
  from the SMB3 test event this week.

  The other fixes are still in review/testing"

* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: if max_channels set to more than one channel request multichannel
  smb3: do not attempt multichannel to server which does not support it
  smb3: when mounting with multichannel include it in requested capabilities

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent PSI state corruption when schedule() races with cgroup
     move.

     A recent commit combined two PSI callbacks to reduce the number of
     cgroup tree updates, but missed that schedule() can drop rq::lock
     for load balancing, which opens the race window for
     cgroup_move_task() which then observes half updated state.

     The fix is to solely use task::ps_flags instead of looking at the
     potentially mismatching scheduler state

   - Prevent an out-of-bounds access in uclamp caused bu a rounding
     division which can lead to an off-by-one error exceeding the
     buckets array size.

   - Prevent unfairness caused by missing load decay when a task is
     attached to a cfs runqueue.

     The old load of the task was attached to the runqueue and never
     removed. Fix it by enforcing the load update through the hierarchy
     for unthrottled run queue instances.

   - A documentation fix fot the 'sched_verbose' command line option"

* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix unfairness caused by missing load decay
  sched: Fix out-of-bound access in uclamp
  psi: Fix psi state corruption when schedule() races with cgroup move
  sched,doc: sched_debug_verbose cmdline should be sched_verbose