MPLS and Tunnel GSO does not work together.  Reject packet which
request such GSO.

Fixes: 0d89d203 ("MPLS: Add limited GSO support").
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes MPLS GSO for case when mpls is compiled as kernel module.

Fixes: 0d89d203 ("MPLS: Add limited GSO support").
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch rearranges the loop in net_rx_action to reduce the
amount of jumping back and forth when reading the code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should only perform the softnet_break check after we have polled
at least one device in net_rx_action.  Otherwise a zero or negative
setting of netdev_budget can lock up the whole system.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit d75b1ade (net: less
interrupt masking in NAPI) required drivers to leave poll_list
empty if the entire budget is consumed.

We have already had two broken drivers so let's add a check for
this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch creates a new function napi_poll and moves the napi
polling code from net_rx_action into it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Gateway having bandwidth_down equal to zero are not accepted
at all and so never added to the Gateway list.
For this reason checking the bandwidth_down member in
batadv_gw_out_of_range() is useless.

This is probably a copy/paste error and this check was supposed
to be "!gw_node" only. Moreover, the way the check is written
now may also lead to a NULL dereference.

Fix this by rewriting the if-condition properly.

Introduced by 414254e3
("batman-adv: tvlv - gateway download/upload bandwidth container")
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fragmentation code was replaced in 610bfc6b
("batman-adv: Receive fragmented packets and merge") by an implementation which
can handle up to 16 fragments of a packet. The packet is prepared for the split
in fragments by the function batadv_frag_send_packet and the actual split is
done by batadv_frag_create.

Both functions calculate the size of a fragment themself. But their calculation
differs because batadv_frag_send_packet also subtracts ETH_HLEN. Therefore,
the check in batadv_frag_send_packet "can a full fragment can be created?" may
return true even when batadv_frag_create cannot create a full fragment.

The function batadv_frag_create doesn't check the size of the skb before
splitting it and therefore might try to create a larger fragment than the
remaining buffer. This creates an integer underflow and an invalid len is given
to skb_split.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fragmentation code was replaced in 610bfc6b
("batman-adv: Receive fragmented packets and merge"). The new code provided a
mostly unused parameter skb for the merging function. It is used inside the
function to calculate the additionally needed skb tailroom. But instead of
increasing its own tailroom, it is only increasing the tailroom of the first
queued skb. This is not correct in some situations because the first queued
entry can be a different one than the parameter.

An observed problem was:

1. packet with size 104, total_size 1464, fragno 1 was received
   - packet is queued
2. packet with size 1400, total_size 1464, fragno 0 was received
   - packet is queued at the end of the list
3. enough data was received and can be given to the merge function
   (1464 == (1400 - 20) + (104 - 20))
   - merge functions gets 1400 byte large packet as skb argument
4. merge function gets first entry in queue (104 byte)
   - stored as skb_out
5. merge function calculates the required extra tail as total_size - skb->len
   - pskb_expand_head tail of skb_out with 64 bytes
6. merge function tries to squeeze the extra 1380 bytes from the second queued
   skb (1400 byte aka skb parameter) in the 64 extra tail bytes of skb_out

Instead calculate the extra required tail bytes for skb_out also using skb_out
instead of using the parameter skb. The skb parameter is only used to get the
total_size from the last received packet. This is also the total_size used to
decide that all fragments were received.
Reported-by: Philipp Psurek <philipp.psurek@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit cecda693 ("net: keep original skb
which only needs header checking during software GSO") keeps the original
skb for packets that only needs header check, but it doesn't drop the
packet if software segmentation or header check were failed.

Fixes cecda693 ("net: keep original skb which only needs header checking during software GSO")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When xfrm6_policy_check() is used, _decode_session6() is called after some
intermediate functions. This function uses IP6CB(), thus TCP_SKB_CB() must be
prepared after the call of xfrm6_policy_check().

Before this patch, scenarii with IPv6 + TCP + IPsec Transport are broken.

Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Reported-by: Huaibin Wang <huaibin.wang@6wind.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Decode and display Port Type and Module Type for ethtool get_settings() call
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit d75b1ade (net: less
interrupt masking in NAPI) breaks caif.

It is now required that if the entire budget is consumed when poll
returns, the napi poll_list must remain empty.  However, like some
other drivers caif tries to do a last-ditch check and if there is
more work it will call napi_schedule and then immediately process
some of this new work.  Should the entire budget be consumed while
processing such new work then we will violate the new caller
contract.

This patch fixes this by not touching any work when we reschedule
in caif.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

iowrite32() will byteswap it's argument on big endian archs.
iowrite32be() will byteswap on little endian archs.
Since we don't want to do this unnecessary byteswap on the fast path,
doorbell is stored in the NIC's native endianness. Using the right
iowrite() according to the arch endianness.

CC: Wei Yang <weiyang@linux.vnet.ibm.com>
CC: David Laight <david.laight@aculab.com>
Fixes: 6a4e8121 ("net/mlx4_en: Avoid calling bswap in tx fast path")
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For linux-3.18.0
The driver lacks netif_napi_del in the normal path and error path
to match the call of netif_napi_add in rtl8139_init_one.
This patch fixes this problem.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For linux-3.18.0
When pci_request_regions is failed in rtl8139_init_board, pci_disable_device
is not called to disable the device which are enabled by pci_enable_device,
because of disable_dev_on_err is not assigned 1.
This patch fix this problem.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The s6000 Xtensa support has been removed from the kernel in
4006e565. There are no other chips using this driver.

While the Mentor/Alcatel PE-MCXMAC IP core is also used in other
designs (Freescale Gianfar/UCC, QLogic NetXen, Solarflare, Agere
ET-1310, Netlogic XLR/XLS), none of these use this driver as it
heavily depends on the s6000 DMA engine. In fact, there is no
code sharing across any of the aforementioned devices.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the function port_cfg_dis_learn() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

During driver load in tg3_init_one, if the driver detects DMA activity before
intializing the chip tg3_halt is called. As part of tg3_halt interrupts are
disabled using routine tg3_disable_ints. This routine was using mailbox value
which was not initialized (default value is 0). As a result driver was writing
0x00000001 to pci config space register 0, which is the vendor id / device id.

This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only
the Vendor ID to identify Configuration Request Retry). Also this issue is only
seen in older generation chipsets like 5722 because config space write to offset
0 from driver is possible. The newer generation chips ignore writes to offset 0.
Also without commit a7877b17a667, for these older chips when a GRC reset is
issued the Bootcode would reprogram the vendor id/device id, which is the reason
this bug was masked earlier.

Fixed by initializing the interrupt mailbox registers before calling tg3_halt.

Please queue for -stable.
Reported-by: Nils Holland <nholland@tisys.org>
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Resolve conflicts between glibc definition of IPV6 socket options
and those defined in Linux headers. Looks like earlier efforts to
solve this did not cover all the definitions.

It resolves warnings during iproute2 build.
Please consider for stable as well.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The changed names are union fields with the same size, so the existing code
still works. But, we now update these variables to the correct names.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit d75b1ade (net: less
interrupt masking in NAPI) breaks virtio_net in an insidious way.

It is now required that if the entire budget is consumed when poll
returns, the napi poll_list must remain empty.  However, like some
other drivers virtio_net tries to do a last-ditch check and if
there is more work it will call napi_schedule and then immediately
process some of this new work.  Should the entire budget be consumed
while processing such new work then we will violate the new caller
contract.

This patch fixes this by not touching any work when we reschedule
in virtio_net.

The worst part of this bug is that the list corruption causes other
napi users to be moved off-list.  In my case I was chasing a stall
in IPsec (IPsec uses netif_rx) and I only belatedly realised that it
was virtio_net which caused the stall even though the virtio_net
poll was still functioning perfectly after IPsec stalled.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both stmmac_open() and stmmac_resume() call stmmac_hw_setup(), and
stmmac_hw_setup() call stmmac_init_ptp() unconditionally. However, only
stmmac_release() calls stmmac_release_ptp(). Since stmmac_suspend()
doesn't call stmmac_release_ptp(), stmmac_resume() also needn't call
stmmac_init_ptp().

This patch also fix a "scheduling while atomic" problem when resume
from suspend/hibernation. Because stmmac_init_ptp() will trigger
scheduling while stmmac_resume() hold a spinlock.

Callgraph of "scheduling while atomic":
stmmac_resume() --> stmmac_hw_setup() --> stmmac_init_ptp() -->
stmmac_ptp_register() --> ptp_clock_register() --> device_create() -->
device_create_groups_vargs() --> device_add() --> devtmpfs_create_node()
--> wait_for_common() --> schedule_timeout() --> __schedule()
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make TPACKET_V3 signal poll when block is closed rather than for every
packet. Side effect is that poll will be signaled when block retire
timer expires which didn't previously happen. Issue was visible when
sending packets at a very low frequency such that all blocks are retired
before packets are received by TPACKET_V3. This caused avoidable packet
loss. The fix ensures that the signal is sent when blocks are closed
which covers the normal path where the block is filled as well as the
path where the timer expires. The case where a block is filled without
moving to the next block (ie. all blocks are full) will still cause poll
to be signaled.
Signed-off-by: Dan Collins <dan@dcollins.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2014-12-19

Here's one more pull request for 3.19. It contains the socket type
verification fixes from Al Viro as well as an skb double-free fix for
6lowpan from Jukka Rissanen.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Hardware always provides compliment of IP pseudo checksum. Stack expects
whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set.

This causes checksum error in nf & ovs.

kernel: qg-19546f09-f2: hw csum failure
kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF          O--------------   3.10.0-123.8.1.el7.x86_64 #1
kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014
kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b
kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0
kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00
kernel: Call Trace:
kernel: <IRQ>  [<ffffffff815e237b>] dump_stack+0x19/0x1b
kernel: [<ffffffff814cd4ca>] netdev_rx_csum_fault+0x3a/0x40
kernel: [<ffffffff814c6232>] __skb_checksum_complete_head+0x62/0x70
kernel: [<ffffffff814c6251>] __skb_checksum_complete+0x11/0x20
kernel: [<ffffffff8155a20c>] nf_ip_checksum+0xcc/0x100
kernel: [<ffffffffa049edc7>] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4]
kernel: [<ffffffff814cf419>] ? netif_rx+0xb9/0x1d0
kernel: [<ffffffffa040eb7b>] ? internal_dev_recv+0xdb/0x130 [openvswitch]
kernel: [<ffffffffa04c8330>] nf_conntrack_in+0xf0/0xa80 [nf_conntrack]
kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40
kernel: [<ffffffffa049e302>] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4]
kernel: [<ffffffff815005ca>] nf_iterate+0xaa/0xc0
kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40
kernel: [<ffffffff81500664>] nf_hook_slow+0x84/0x140
kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40
kernel: [<ffffffff81509dd4>] ip_rcv+0x344/0x380

Hardware verifies IP & tcp/udp header checksum but does not provide payload
checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet.

Cc: Jiri Benc <jbenc@redhat.com>
Cc: Stefan Assmann <sassmann@redhat.com>
Reported-by: Sunil Choudhary <schoudha@redhat.com>
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

when skb_gso_segment returns error, the original skb should be freed
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: David L Stevens <david.stevens@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

same story as cmtp
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

... rather than relying on ciptool(8) never passing it anything else.  Give
it e.g. an AF_UNIX connected socket (from socketpair(2)) and it'll oops,
trying to evaluate &l2cap_pi(sock->sk)->chan->dst...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

it's OK after we'd verified the sockets, but not before that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

If we need to drop the message because of some error in the
compression etc, then do not free the skb as that is done
automatically in other part of networking stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Pull module updates from Rusty Russell:
 "The exciting thing here is the getting rid of stop_machine on module
  removal.  This is possible by using a simple atomic_t for the counter,
  rather than our fancy per-cpu counter: it turns out that no one is
  doing a module increment per net packet, so the slowdown should be in
  the noise"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  param: do not set store func without write perm
  params: cleanup sysfs allocation
  kernel:module Fix coding style errors and warnings.
  module: Remove stop_machine from module unloading
  module: Replace module_ref with atomic_t refcnt
  lib/bug: Use RCU list ops for module_bug_list
  module: Unlink module with RCU synchronizing instead of stop_machine
  module: Wait for RCU synchronizing before releasing a module

Pull virtio fixes from Michael S Tsirkin:
 "virtio 1.0 related fixes

  Most importantly, this fixes using virtio_pci as a module.

  Further, the big virtio 1.0 conversion missed a couple of places.
  This fixes them up.

  This isn't 100% sparse-clean yet because on many architectures
  get_user triggers sparse warnings when used with __bitwise tag (when
  same tag is on both pointer and value read).

  I posted a patchset to fix it up by adding __force on all arches that
  don't already have it (many do), when that's merged these warnings
  will go away"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci: restore module attributes
  mic/host: fix up virtio 1.0 APIs
  vringh: update for virtio 1.0 APIs
  vringh: 64 bit features
  tools/virtio: add virtio 1.0 in vringh_test
  tools/virtio: add virtio 1.0 in virtio_test
  tools/virtio: enable -Werror
  tools/virtio: 64 bit features
  tools/virtio: fix vringh test
  tools/virtio: more stubs
  virtio: core support for config generation
  virtio_pci: add VIRTIO_PCI_NO_LEGACY
  virtio_pci: move probe to common file
  virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY
  virtio_config: fix virtio_cread_bytes
  virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are regression fixes (leds-gpio, ACPI backlight driver,
  operating performance points library, ACPI device enumeration
  messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device
  PM), some cleanups in the operating performance points (OPP)
  framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of
  minor intel_pstate driver changes, a new MAINTAINERS entry for it and
  an ACPI fan driver change needed for better support of thermal
  management in user space.

  Specifics:

   - Fix a regression in leds-gpio introduced by a recent commit that
     inadvertently changed the name of one of the properties used by the
     driver (Fabio Estevam).

   - Fix a regression in the ACPI backlight driver introduced by a
     recent fix that missed one special case that had to be taken into
     account (Aaron Lu).

   - Drop the level of some new kernel messages from the ACPI core
     introduced by a recent commit to KERN_DEBUG which they should have
     used from the start and drop some other unuseful KERN_ERR messages
     printed by ACPI (Rafael J Wysocki).

   - Revert an incorrect commit modifying the cpupower tool (Prarit
     Bhargava).

   - Fix two regressions introduced by recent commits in the OPP library
     and clean up some existing minor issues in that code (Viresh
     Kumar).

   - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the
     tree (or drop it where that can be done) in order to make it
     possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf
     Hansson, Ludovic Desroches).

     There will be one more "CONFIG_PM_RUNTIME removal" batch after this
     one, because some new uses of it have been introduced during the
     current merge window, but that should be sufficient to finally get
     rid of it.

   - Make the ACPI EC driver more robust against race conditions related
     to GPE handler installation failures (Lv Zheng).

   - Prevent the ACPI device PM core code from attempting to disable
     GPEs that it has not enabled which confuses ACPICA and makes it
     report errors unnecessarily (Rafael J Wysocki).

   - Add a "force" command line switch to the intel_pstate driver to
     make it possible to override the blacklisting of some systems in
     that driver if needed (Ethan Zhao).

   - Improve intel_pstate code documentation and add a MAINTAINERS entry
     for it (Kristen Carlson Accardi).

   - Make the ACPI fan driver create cooling device interfaces witn
     names that reflect the IDs of the ACPI device objects they are
     associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B").

     That's necessary for user space thermal management tools to be able
     to connect the fans with the parts of the system they are supposed
     to be cooling properly.  From Srinivas Pandruvada"

* tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  MAINTAINERS: add entry for intel_pstate
  ACPI / video: update the skip case for acpi_video_device_in_dod()
  power / PM: Eliminate CONFIG_PM_RUNTIME
  NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / EC: Fix unexpected ec_remove_handlers() invocations
  Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
  tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
  PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
  mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
  PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
  ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / PM: Do not disable wakeup GPEs that have not been enabled
  ACPI / utils: Drop error messages from acpi_evaluate_reference()
  ...

Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver update from Darren Hart:
 - thinkpad-acpi: Switch to software mute, cleanups
 - acerhdf: Bang-bang thermal governor, new models, cleanups
 - dell-laptop: New keyboard backlight support and documentation
 - toshiba_acpi: Keyboard backlight updates, hotkey handling
 - dell-wmi: Keypress filtering, WMI event processing
 - eeepc-laptop: Multiple cleanups, improved error handling, documentation
 - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
 - misc: Code cleanups, quirks, various new IDs

* tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits)
  platform/x86/acerhdf: Still depends on THERMAL
  Documentation: Add entry for dell-laptop sysfs interface
  acpi: Remove _OSI(Linux) for ThinkPads
  thinkpad-acpi: Try to use full software mute control
  acerhdf: minor clean up
  acerhdf: added critical trip point
  acerhdf: Use bang-bang thermal governor
  acerhdf: Adding support for new models
  acerhdf: Adding support for "manual mode"
  dell-smo8800: Add more ACPI ids and change description of driver
  platform: x86: dell-laptop: Add support for keyboard backlight
  toshiba_acpi: Add keyboard backlight mode change event
  toshiba_acpi: Change notify funtion to handle more events
  toshiba_acpi: Move hotkey enabling code to its own function
  dell-wmi: Don't report keypresses on keybord illumination change
  dell-wmi: Don't report keypresses for radio state changes
  hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
  toshiba-acpi: Add missing ID (TOS6207)
  Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put"
  platform: x86: Deletion of checks before backlight_device_unregister()
  ...

Pull small watchdog update from Wim Van Sebroeck:
 - fix the argument of watchdog_active() in imx2_wdt
 - Add power management support to the imx2_wdt watchdog.

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: imx2_wdt: Fix the argument of watchdog_active()
  watchdog: imx2_wdt: Add power management support.

Pull second set of media updates from Mauro Carvalho Chehab:

 - Move drivers for really old legacy hardware to staging.  Those are
   using obsolete media kAPIs and are for hardware that nobody uses for
   years.  Simply not worth porting them to the new kAPIs.  Of course,
   if anyone pops up to fix, we can move them back from there

 - While not too late, do some API fixups at the new colorspace API,
   added for v3.19

 - Some improvements for rcar_vin driver

 - Some fixups at cx88 and vivid drivers

 - Some Documentation fixups

* tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] bq/c-qcam, w9966, pms: move to staging in preparation for removal
  [media] tlg2300: move to staging in preparation for removal
  [media] vino/saa7191: move to staging in preparation for removal
  [media] MAINTAINERS: vivi -> vivid
  [media] cx88: remove leftover start_video_dma() call
  [media] cx88: add missing alloc_ctx support
  [media] v4l2-ioctl: WARN_ON if querycap didn't fill device_caps
  [media] vivid: fix CROP_BOUNDS typo for video output
  [media] DocBook media: update version number and document changes
  [media] vivid.txt: document new controls
  [media] DocBook media: add missing ycbcr_enc and quantization fields
  [media] v4l2-mediabus.h: use two __u16 instead of two __u32
  [media] rcar_vin: Fix interrupt enable in progressive
  [media] rcar_vin: Enable VSYNC field toggle mode
  [media] rcar_vin: Add scaling support
  [media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCs
  [media] rcar_vin: Add YUYV capture format support

Pull infiniband updates from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.19:

   - On-demand paging support in core midlayer and mlx5 driver.  This
     lets userspace create non-pinned memory regions and have the
     adapter HW trigger page faults.
   - iSER and IPoIB updates and fixes.
   - Low-level HW driver updates for cxgb4, mlx4 and ocrdma.
   - Other miscellaneous fixes"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (56 commits)
  IB/mlx5: Implement on demand paging by adding support for MMU notifiers
  IB/mlx5: Add support for RDMA read/write responder page faults
  IB/mlx5: Handle page faults
  IB/mlx5: Page faults handling infrastructure
  IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creation
  IB/mlx5: Changes in memory region creation to support on-demand paging
  IB/mlx5: Implement the ODP capability query verb
  mlx5_core: Add support for page faults events and low level handling
  mlx5_core: Re-add MLX5_DEV_CAP_FLAG_ON_DMND_PG flag
  IB/srp: Allow newline separator for connection string
  IB/core: Implement support for MMU notifiers regarding on demand paging regions
  IB/core: Add support for on demand paging regions
  IB/core: Add flags for on demand paging support
  IB/core: Add support for extended query device caps
  IB/mlx5: Add function to read WQE from user-space
  IB/core: Add umem function to read data from user-space
  IB/core: Replace ib_umem's offset field with a full address
  IB/mlx5: Enhance UMR support to allow partial page table update
  IB/mlx5: Remove per-MR pas and dma pointers
  RDMA/ocrdma: Always resolve destination mac from GRH for UD QPs
  ...

Merge misc patches from Andrew Morton:
 "A few stragglers"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  tools/testing/selftests/Makefile: alphasort the TARGETS list
  mm/zsmalloc: adjust order of functions
  ocfs2: fix journal commit deadlock
  ocfs2/dlm: fix race between dispatched_work and dlm_lockres_grab_inflight_worker
  ocfs2: reflink: fix slow unlink for refcounted file
  mm/memory.c:do_shared_fault(): add comment
  .mailmap: Santosh Shilimkar has moved
  .mailmap: update akpm@osdl.org
  lib/show_mem.c: add cma reserved information
  fs/proc/meminfo.c: include cma info in proc/meminfo
  mm: cma: split cma-reserved in dmesg log
  hfsplus: fix longname handling
  mm/mempolicy.c: remove unnecessary is_valid_nodemask()