- 07 Jun, 2021 1 commit
-
-
Kuninori Morimoto authored
This patch moves snd_soc_runtime_set_dai_fmt() to upside. This is prepare to support snd_soc_runtime_get_dai_fmt(). Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87im34nc9r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 04 Jun, 2021 7 commits
-
-
Mark Brown authored
Merge series "ASoC: codecs: wcd934x: add Headset and button detection support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset adds support to MBHC(Multi Button Headset Control) block found in Qualcomm WCD codecs. MBHC support headset type detection, both Mechanical and electrical insert/removal detection along with 8 buttons detection, Over current interrupts on HPHL/R, Impedance Measurements on HPHL/R. Eventhough MBHC block supports things like OverCurrent detection, Currently its reported as a kernel debug message. Should this be reported as an uevent to userspace? like the way USB reports? Any suggestions? First patch adds a common mbhc driver and the second one wcd934x specific driver changes along with sdm845 soundcard related changes. Common wcd-mbhc-v2 driver should be reusable across multiple codecs like WCD9335, WCD934x, WCD937x and WCD938x. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. Changes since v2: - switched to EXPORT_SYMBOL_GPL from EXPORT_SYMBOL - converted one of the if else to switch case. Srinivas Kandagatla (4): ASoC: dt-bindings: wcd934x: add bindings for Headset Button detection ASoC: codecs: wcd: add multi button Headset detection support ASoC: codecs: wcd934x: add mbhc support ASoC: qcom: sdm845: add jack support for WCD934x .../bindings/sound/qcom,wcd934x.yaml | 30 + include/linux/mfd/wcd934x/registers.h | 57 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wcd-mbhc-v2.c | 1475 +++++++++++++++++ sound/soc/codecs/wcd-mbhc-v2.h | 340 ++++ sound/soc/codecs/wcd934x.c | 884 +++++++++- sound/soc/qcom/sdm845.c | 8 + 8 files changed, 2785 insertions(+), 15 deletions(-) create mode 100644 sound/soc/codecs/wcd-mbhc-v2.c create mode 100644 sound/soc/codecs/wcd-mbhc-v2.h -- 2.21.0
-
Srinivas Kandagatla authored
Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210604115230.23259-5-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
WCD934x has Multi Button Headset Control hardware to support Headset insertion, type detection, 8 headset buttons detection, Over Current detection and Impedence measurements. This patch adds support for this feature via common mbhc layer. Signed-off-by:
-
Srinivas Kandagatla authored
Most new Qualcomm WCD codecs support MBHC(Multi Button Headset Control) via ADC. This patchset adds support to Common parts of this MBHC support so that WCD codecs need not duplicate them. To do that codec exposes set of register fields and callbacks to this common driver to control it. Signed-off-by:
-
Srinivas Kandagatla authored
Add bindings required for Multi Button Headset detection. WCD934x support Headsets with upto 8 buttons including, impedance measurement on both L/R Headset speakers and cross connection detection. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210604115230.23259-2-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Bertrand Jacquin authored
With CONFIG_SND_SOC_LPASS_RX_MACRO=m and CONFIG_REGMAP_MMIO undefined, build fails with the following error make -f /var/tmp/portage/sys-kernel/stable-sources-5.12.8/work/linux-5.12.8-stable/scripts/Makefile.modpost sed 's/\.ko$/\.o/' modules.order | scripts/mod/modpost -E -o modules-only.symvers -i vmlinux.symvers -T - ERROR: modpost: "__devm_regmap_init_mmio_clk" [sound/soc/codecs/snd-soc-lpass-rx-macro.ko] undefined! This does also apply to other Qualcomm Macro LPASS all making call to devm_regmap_init_mmio() Signed-off-by:Bertrand Jacquin <bertrand@jacquin.bzh> Link: https://lore.kernel.org/r/20210603221816.2642402-1-bertrand@jacquin.bzhSigned-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a fallthrough; statement. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by:
Peter Ujfalusi <peter.ujflausi@gmail.com> Link: https://lore.kernel.org/r/20210604072714.GA244640@embeddedorSigned-off-by:
-
- 03 Jun, 2021 12 commits
-
-
Mark Brown authored
Merge series "ASoC: rsnd: tidyup adg and header" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark I noticed that adg can be more clean code. And rsnd.h header comment was not so good because patch has been randomly added. This patch tidyup these. Kuninori Morimoto (5): ASoC: rsnd: adg: supply __printf(x, y) formatting for dbg_msg() ASoC: rsnd: adg: tidyup rsnd_adg_get_clkin/out() parameter ASoC: rsnd: adg: use more simple method for null_clk ASoC: rsnd: adg: check return value for rsnd_adg_get_clkin/out() ASoC: rsnd: tidyup __rsnd_mod_xxx macro comments sound/soc/sh/rcar/adg.c | 139 +++++++++++++++++++++++++-------------- sound/soc/sh/rcar/rsnd.h | 21 ++---- 2 files changed, 97 insertions(+), 63 deletions(-) -- 2.25.1
-
Yufen Yu authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Link: https://lore.kernel.org/r/20210524093521.612176-1-yuyufen@huawei.comSigned-off-by:
-
Yang Yingliang authored
Using devm_snd_soc_register_card() can make the code shorter and cleaner. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210602133359.310647-1-yangyingliang@huawei.comSigned-off-by:
-
Colin Ian King authored
Most callers of_get_child_count() check that "nr" is non-zero so it causes a static checker warning when we don't do that here. This does not cause a problem or a crash, but having zero SSUIes does not make sense either so let's add a check. Addresses-Coverity: ("Unchecked return value") Fixes: c413983e ("ASoC: rsnd: adjust disabled module") Acked-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210603110315.81146-1-colin.king@canonical.comSigned-off-by:
-
Oleksij Rempel authored
Convert the imx-audmux binding to DT schema format using json-schema Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
-
Yang Yingliang authored
module_rpmsg_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by:
-
Yang Yingliang authored
Using devm_snd_soc_register_card() can make the code shorter and cleaner. Signed-off-by:
-
Kuninori Morimoto authored
status and __rsnd_mod_xxx were updated, but some related comments were not. And it has verbose comments. This patch cleanup/tidyup these. 1) adds missing "D" to status sample 2) remove verbose list for "H" 3) add "needs protect" to __rsnd_mod_call_xxx Signed-off-by:
-
Kuninori Morimoto authored
Current rsnd_adg_get_clkin/out() are void function, thus adg->clk/clkout[i] might be NULL. But, for_each_rsnd_clk/clkout() macros are assuming all clks are non NULL. Because of this mismatch, code can be complex and/or buggy. These functions return error by this patch, and make sure all clks are non NULL. Signed-off-by:
-
Kuninori Morimoto authored
commit 965386c9 ("ASoC: rsnd: call unregister for null_hw when removed") tried unregister null_clk, but it has some issues. 1st issue is kernel will indicate below message when unregistering, because of its timing. unregistering should be happen after clk_disable(). clk_unregister: unregistering prepared clock: rsnd_adg_null 2nd issue is, it is using priv->null_clk, but it should be adg->null_clk. 3rd issue is it is using very complex clk registering method. more simple clk_register/unregister_fixed_rate() should be OK. This patch fixes these. Fixes: 965386c9 ("ASoC: rsnd: call unregister for null_hw when removed") Signed-off-by:
-
Kuninori Morimoto authored
set priv->adg before rsnd_adg_get_clkin/out() to be more simple code. Nothing is changed, but is preparation for next "ASoC: rsnd: adg: use more simple method for null_clk" patch Signed-off-by:
-
Kuninori Morimoto authored
Fixes the following W=1 kernel build warning(s): sound/soc/sh/rcar/adg.c: In function 'dbg_msg': sound/soc/sh/rcar/adg.c:594:2: warning: function 'dbg_msg' might \ be a candidate for 'gnu_printf' format attribute\ [-Wsuggest-attribute=format] Fixes: 1f9c82b5 ("ASoC: rsnd: add debugfs support") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 02 Jun, 2021 6 commits
-
-
YueHaibing authored
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20210524115506.35724-1-yuehaibing@huawei.comSigned-off-by:
-
Vincent Knecht authored
Allow specifying Vddd regulator/supply to be enabled on I2C probing. Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210528105101.508254-4-vincent.knecht@mailoo.orgSigned-off-by:
-
Vincent Knecht authored
Add optional vddd-supply property to allow regulator control. Signed-off-by:
-
Vincent Knecht authored
Add specific init function to poke needed registers & values for this IC Signed-off-by:
-
Vincent Knecht authored
Document TFA9897 bindings. Signed-off-by:
-
Shaokun Zhang authored
Function 'sigmadsp_reset' is declared twice, so remove the repeated declaration. Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1622279690-3740-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by:
-
- 01 Jun, 2021 14 commits
-
-
Mark Brown authored
The only use of the static and global snd_compress_ops structs is to assign their address to the compress_ops field in the snd_soc_component_driver struct which is a pointer to const. Make them const to allow the compiler to put them in read-only memory. Rikard Falkeborn (5): ASoC: cs47125: Constify static struct snd_compress_ops ASoC: wm5102: Constify static struct snd_compress_ops ASoC: wm5110: Constify static struct snd_compress_ops ASoC: qcom: q6asm-dai: Constify static struct snd_compress_ops ASoC: SOF: Intel: Constify sof_probe_compressed_ops sound/soc/codecs/cs47l24.c | 2 +- sound/soc/codecs/wm5102.c | 2 +- sound/soc/codecs/wm5110.c | 2 +- sound/soc/qcom/qdsp6/q6asm-dai.c | 2 +- sound/soc/sof/compress.c | 2 +- sound/soc/sof/compress.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) -- 2.31.1
-
Mark Brown authored
Merge series "ASoC: rsnd: adjust disabled module for R-Car D3" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark, Geert Renesas Sound driver is assuming that all SSI/SRC are connected. But some SSI/SRC are not connected on Some Renesas SoC. ex) H2 E2 SRC0 <= SRC1 SRC1 SRC2 SRC2 ... ... We accepted it by using "status = disabled" on DT before. ex) rcar_sound,src { src-0 { => status = "disabled"; }; src1: src-1 { ... }; ... But R-Car D3 have many disabled modules (It has SSI3/SSI4, SRC5/SRC6), and Renesas SoC maintainer don't want above style on DT. ex) rcar_sound,src { => src0: src-0 { status = "disabled"; }; => src1: src-1 { status = "disabled"; }; => src2: src-2 { status = "disabled"; }; => src3: src-3 { status = "disabled"; }; => src4: src-4 { status = "disabled"; }; src5: src-5 { ... }; ... This patch-set adjust to this situation, and enables to intuitive DT settings. rcar_sound,src { src5: src-5 { ... }; src6: src-6 { ... }; }; Kuninori Morimoto (4): ASoC: rsnd: tidyup rsnd_parse_connect_common() ASoC: rsnd: tidyup rsnd_dma_request_channel() ASoC: rsnd: tidyup rsnd_parse_connect_xxx() ASoC: rsnd: adjust disabled module sound/soc/sh/rcar/core.c | 58 ++++++++++++++++++++++++++++++++++++++-- sound/soc/sh/rcar/dma.c | 8 +++--- sound/soc/sh/rcar/dvc.c | 2 +- sound/soc/sh/rcar/rsnd.h | 16 ++++++----- sound/soc/sh/rcar/src.c | 6 +++-- sound/soc/sh/rcar/ssi.c | 12 ++++++--- sound/soc/sh/rcar/ssiu.c | 10 ++++--- 7 files changed, 91 insertions(+), 21 deletions(-) -- 2.25.1 -
Kai Vehmanen authored
Add PCI DID for Intel AlderLake-M. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210528184153.18251-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Ranjani Sridharan authored
cl_dsp_init() dumps the ROM status if it fails after max attempts before powering off the DSP. Remove the duplicate log to print the ROM status and error in hda_dsp_cl_boot_firmware(). These values are invalid anyway as the DSP is already powered off. Co-developed-by:
Bard Liao <bard.liao@intel.com> Signed-off-by:
-
Ranjani Sridharan authored
Clean up the hda_dsp_dump() function to avoid duplicating the ROM status and error. Signed-off-by:
-
YueHaibing authored
Use DEVICE_ATTR_RW() helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210528063033.19904-1-yuehaibing@huawei.comSigned-off-by:
-
Rikard Falkeborn authored
The only usage of sof_probe_compressed_ops is to assign its address to the compress_ops field in the snd_soc_component_driver struct, which is a pointer to const. The assignment is done in sound/soc/sof/pcm.c. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210526231013.46530-6-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
The snd_compress_ops structs are only stored in the compress_ops field of a snd_soc_component_driver struct, so make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Rikard Falkeborn authored
The snd_compress_ops structs are only stored in the compress_ops field of a snd_soc_component_driver struct, so make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Rikard Falkeborn authored
The snd_compress_ops structs are only stored in the compress_ops field of a snd_soc_component_driver struct, so make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Rikard Falkeborn authored
The snd_compress_ops structs are only stored in the compress_ops field of a snd_soc_component_driver struct, so make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Kuninori Morimoto authored
In general Renesas SoC's SSI/SRC are all enabled, but some SoC is not. H2 E2 SRC0 <= SRC1 SRC1 SRC2 SRC2 ... ... Renesas Sound driver is assuming that *all* modules are enabled, and thus it is using *data array* to access each modules. Because of it, we have been using "status = disabled" at DT, and using *full size* array but avoiding disabled module. ex) rcar_sound,src { src-0 { => status = "disabled"; }; src1: src-1 { ... }; ... But R-Car D3 have many disabled modules (It has SSI3/SSI4, SRC5/SRC6), and Renesas SoC maintainer don't want above style on DT. ex) rcar_sound,src { => src0: src-0 { status = "disabled"; }; => src1: src-1 { status = "disabled"; }; => src2: src-2 { status = "disabled"; }; => src3: src-3 { status = "disabled"; }; => src4: src-4 { status = "disabled"; }; src5: src-5 { ... }; src6: src-6 { ... }; }; rcar_sound,ssi { => ssi0: ssi-0 { status = "disabled"; }; => ssi1: ssi-1 { status = "disabled"; }; => ssi2: ssi-2 { status = "disabled"; }; ssi3: ssi-3 { ... }; ssi4: ssi-4 { ... }; }; To adjust it, it needs to care about related for_each_child_of_node() loop on rsnd driver, and it is used from... > grep -l for_each_child_of_node sound/soc/sh/rcar/* sound/soc/sh/rcar/core.c sound/soc/sh/rcar/ctu.c sound/soc/sh/rcar/dma.c sound/soc/sh/rcar/dvc.c sound/soc/sh/rcar/mix.c sound/soc/sh/rcar/src.c sound/soc/sh/rcar/ssi.c sound/soc/sh/rcar/ssiu.c This patch adjust to this situation. By this patch, we can avoid disabled modules on DT rcar_sound,src { src5: src-5 { ... }; src6: src-6 { ... }; }; rcar_sound,ssi { ssi3: ssi-3 { ... }; ssi4: ssi-4 { ... }; }; Signed-off-by: -
Kuninori Morimoto authored
This patch tidyup rsnd_parse_connect_xxx() style. Nothing is changed, but is preparation for next "ASoC: rsnd: adjust disabled module" patch Signed-off-by:
-
Kuninori Morimoto authored
This patch adds "char *name" to rsnd_dma_request_channel(). It is not yet used so far, but is preparation for next "ASoC: rsnd: adjust disabled module" patch Signed-off-by:
-
