Skip to content

L
linux
Switch branch/tag
  1. 29 Jun, 2017 32 commits
  3. 28 Jun, 2017 8 commits
    • Huacai Chen's avatar
      MIPS: Loongson: Add Loongson-3A R3 basic support · 0a00024d
      Huacai Chen authored 
      Loongson-3A R3 is very similar to Loongson-3A R2.

All Loongson-3 CPU family:

Code-name       Brand-name       PRId
Loongson-3A R1  Loongson-3A1000  0x6305
Loongson-3A R2  Loongson-3A2000  0x6308
Loongson-3A R3  Loongson-3A3000  0x6309
Loongson-3B R1  Loongson-3B1000  0x6306
Loongson-3B R2  Loongson-3B1500  0x6307
Signed-off-by: default avatarHuacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16585/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      0a00024d
    • Paul Burton's avatar
      MIPS: SEAD-3: Fix GIC interrupt specifiers · d3f61634
      Paul Burton authored 
      The various interrupt specifiers in the device tree are not in a valid
format for the MIPS GIC interrupt controller binding. Where each
interrupt should provide 3 values - GIC_LOCAL or GIC_SHARED, the
pin number & the type of interrupt - the device tree was only providing
the pin number. This causes interrupts for those devices to not be used
when a GIC is present. SEAD-3 systems without a GIC are unaffected since
the DT fixup code generates interrupt specifiers that are valid for the
CPU interrupt controller.

Fix this by adding the GIC_SHARED & IRQ_TYPE_LEVEL_HIGH values to each
interrupt specifier.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Fixes: c11e3b48 ("MIPS: SEAD3: Probe UARTs using DT")
Fixes: a34e9388 ("MIPS: SEAD3: Probe ethernet controller using DT")
Fixes: 7afd2a5a ("MIPS: SEAD3: Probe EHCI controller using DT")
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org  # v4.9+
Patchwork: https://patchwork.linux-mips.org/patch/16189/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      d3f61634
    • Paul Burton's avatar
      MIPS: SEAD-3: Set interrupt-parent per-device, not at root node · fbdc674b
      Paul Burton authored 
      The SEAD-3 board may be configured with or without a MIPS Global
Interrupt Controller (GIC). Because of this we have a device tree with a
default case of a GIC present, and code to fixup the device tree based
upon a configuration register that indicates the presence of the GIC.

In order to keep this DT fixup code simple, the interrupt-parent
property was specified at the root node of the SEAD-3 DT, allowing the
fixup code to simply change this property to the phandle of the CPU
interrupt controller if a GIC is not present & affect all
interrupt-using devices at once. This however causes a problem if we do
have a GIC & the device tree is used as-is, because the interrupt-parent
property of the root node applies to the CPU interrupt controller node.
This causes a cycle when of_irq_init() attempts to probe interrupt
controllers in order and boots fail due to a lack of configured
interrupts, with this message printed on the kernel console:

[    0.000000] OF: of_irq_init: children remain, but no parents

Fix this by removing the interrupt-parent property from the DT root node
& instead setting it for each device which uses interrupts, ensuring
that the CPU interrupt controller node has no interrupt-parent &
allowing of_irq_init() to identify it as the root interrupt controller.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Reported-by: default avatarKeng Koh <keng.koh@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16187/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      fbdc674b
    • Paul Burton's avatar
      MIPS: generic: Add a MAINTAINERS entry · 032a469b
      Paul Burton authored 
      Add an entry to MAINTAINERS for the generic platform code, such that
relevant people, starting with myself, can be CC'd on patches.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16186/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      032a469b
    • Paul Burton's avatar
      MIPS: generic: Set RTC_ALWAYS_BCD to 0 · ae7ce6b1
      Paul Burton authored 
      Drivers for the mc146818 RTC generally check control registers to
determine whether a value is encoded as binary or as a binary coded
decimal. Setting RTC_ALWAYS_BCD to 1 effectively bypasses these checks
and causes drivers to always expect binary coded decimal values,
regardless of control register values.

This does not seem like a sane default - defaulting to 0 allows the
drivers to check control registers to determine encoding type & allows
the driver to work generically with both binary & BCD encodings. Set
this in mach-generic/mc146818rtc.h such that the generic kernel, or
platforms which don't provide a custom mc146818rtc.h, can have an RTC
driver which works with both encodings.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16185/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      ae7ce6b1
    • Paul Burton's avatar
      MIPS: generic: Abstract FDT fixup application · e889dfca
      Paul Burton authored 
      Introduce an apply_mips_fdt_fixups() function which can apply fixups to
an FDT based upon an array of fixup descriptions. This abstracts that
functionality such that legacy board code can apply FDT fixups without
requiring lots of duplication.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16184/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      e889dfca
    • Paul Burton's avatar
      MIPS: generic/yamon-dt: Use serial* rather than uart* aliases · c3d62fc6
      Paul Burton authored 
      Name aliases in the SEAD-3 device tree serial0 & serial1, rather than
uart0 & uart1. This allows the core serial code to make use of the
aliases to ensure that the UARTs are consistently numbered as expected
rather than having the numbering depend upon probe order.

When translating YAMON-provided serial configuration to a device tree
stdout-path property adjust accordingly, such that we continue to
reference a valid alias.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16183/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      c3d62fc6
    • Paul Burton's avatar
      MIPS: generic/yamon-dt: Support > 256MB of RAM · f41d2430
      Paul Burton authored 
      YAMON can expose more than 256MB of RAM to Linux on Malta by passing an
ememsize environment variable with the full size, but the kernel then
needs to be careful to choose the corresponding physical memory regions,
avoiding the IO memory window. This is platform dependent, and on Malta
it also depends on the memory layout which varies between system
controllers.

Extend yamon_dt_amend_memory() to generically handle this by taking
[e]memsize bytes of memory from an array of memory regions passed in as
a new parameter. Board code provides this array as appropriate depending
on its own memory map.

[paul.burton@imgtec.com: SEAD-3 supports 384MB DDR from 0]
Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16182/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      f41d2430
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7