- 13 Nov, 2018 40 commits
-
-
Maciej W. Rozycki authored
commit 3f2aa244 upstream. Fix a TURBOchannel support regression with commit 205e1b7f ("dma-mapping: warn when there is no coherent_dma_mask") that caused coherent DMA allocations to produce a warning such as: defxx: v1.11 2014/07/01 Lawrence V. Stefani and others tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2 Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650 0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff 0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8 98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff 0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8 0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0 0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000 9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940 0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8 ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940 ... Call Trace: [<ffffffff8004dc78>] show_stack+0xa0/0x130 [<ffffffff80067940>] __warn+0x128/0x170 ---[ end trace b1d1e094f67f3bb2 ]--- This is because the TURBOchannel bus driver fails to set the coherent DMA mask for devices enumerated. Set the regular and coherent DMA masks for TURBOchannel devices then, observing that the bus protocol supports a 34-bit (16GiB) DMA address space, by interpreting the value presented in the address cycle across the 32 `ad' lines as a 32-bit word rather than byte address[1]. The architectural size of the TURBOchannel DMA address space exceeds the maximum amount of RAM any actual TURBOchannel system in existence may have, hence both masks are the same. This removes the warning shown above. References: [1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17 Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20835/ Fixes: 205e1b7f ("dma-mapping: warn when there is no coherent_dma_mask") Cc: stable@vger.kernel.org # 4.16+ Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aaro Koskinen authored
commit c0fae7e2 upstream. The maximum number of interfaces is returned by cvmx_helper_get_number_of_interfaces(), and the value is used to access interface_port_count[]. When CN68XX support was added, we forgot to increase the array size. Fix that. Fixes: 2c8c3f02 ("MIPS: Octeon: Support additional interfaces on CN68XX") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Christophe Leroy authored
commit 0f99153d upstream. mpic_get_primary_version() is not defined when not using MPIC. The compile error log like: arch/powerpc/sysdev/built-in.o: In function `fsl_of_msi_probe': fsl_msi.c:(.text+0x150c): undefined reference to `fsl_mpic_primary_get_version' Signed-off-by:
Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by:
Scott Wood <scottwood@freescale.com> Reported-by:
Radu Rendec <radu.rendec@gmail.com> Fixes: 807d38b7 ("powerpc/mpic: Add get_version API both for internal and external use") Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Wenwen Wang authored
commit 800a7340 upstream. In copy_params(), the struct 'dm_ioctl' is first copied from the user space buffer 'user' to 'param_kernel' and the field 'data_size' is checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload up to its 'data' member). If the check fails, an error code EINVAL will be returned. Otherwise, param_kernel->data_size is used to do a second copy, which copies from the same user-space buffer to 'dmi'. After the second copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'. Given that the buffer 'user' resides in the user space, a malicious user-space process can race to change the content in the buffer between the two copies. This way, the attacker can inject inconsistent data into 'dmi' (versus previously validated 'param_kernel'). Fix redundant copying of 'minimum_data_size' from user-space buffer by using the first copy stored in 'param_kernel'. Also remove the 'data_size' check after the second copy because it is now unnecessary. Cc: stable@vger.kernel.org Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Amir Goldstein authored
commit 93f38b6f upstream. printk format used %*s instead of %.*s, so hostname_len does not limit the number of bytes accessed from hostname. Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit bb6ad557 upstream. In call_xpt_users(), we delete the entry from the list, but we do not reinitialise it. This triggers the list poisoning when we later call unregister_xpt_user() in nfsd4_del_conns(). Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Trond Myklebust authored
commit 943cff67 upstream. The intention of nfs4_session_set_rwsize() was to cap the r/wsize to the buffer sizes negotiated by the CREATE_SESSION. The initial code had a bug whereby we would not check the values negotiated by nfs_probe_fsinfo() (the assumption being that CREATE_SESSION will always negotiate buffer values that are sane w.r.t. the server's preferred r/wsizes) but would only check values set by the user in the 'mount' command. The code was changed in 4.11 to _always_ set the r/wsize, meaning that we now never use the server preferred r/wsizes. This is the regression that this patch fixes. Also rename the function to nfs4_session_limit_rwsize() in order to avoid future confusion. Fixes: 03385332 (NFSv4.1 respect server's max size in CREATE_SESSION") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
-
Lukas Wunner authored
commit 746a923b upstream. Commit 1e77d0a1 ("genirq: Sanitize spurious interrupt detection of threaded irqs") made detection of spurious interrupts work for threaded handlers by: a) incrementing a counter every time the thread returns IRQ_HANDLED, and b) checking whether that counter has increased every time the thread is woken. However for oneshot interrupts, the commit unmasks the interrupt before incrementing the counter. If another interrupt occurs right after unmasking but before the counter is incremented, that interrupt is incorrectly considered spurious: time | irq_thread() | irq_thread_fn() | action->thread_fn() | irq_finalize_oneshot() | unmask_threaded_irq() /* interrupt is unmasked */ | | /* interrupt fires, incorrectly deemed spurious */ | | atomic_inc(&desc->threads_handled); /* counter is incremented */ v This is observed with a hi3110 CAN controller receiving data at high volume (from a separate machine sending with "cangen -g 0 -i -x"): The controller signals a huge number of interrupts (hundreds of millions per day) and every second there are about a dozen which are deemed spurious. In theory with high CPU load and the presence of higher priority tasks, the number of incorrectly detected spurious interrupts might increase beyond the 99,900 threshold and cause disablement of the interrupt. In practice it just increments the spurious interrupt count. But that can cause people to waste time investigating it over and over. Fix it by moving the accounting before the invocation of irq_finalize_oneshot(). [ tglx: Folded change log update ] Fixes: 1e77d0a1 ("genirq: Sanitize spurious interrupt detection of threaded irqs") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Cc: stable@vger.kernel.org # v3.16+ Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.deSigned-off-by:
-
He Zhe authored
commit 277fcdb2 upstream. log_buf_len_setup does not check input argument before passing it to simple_strtoull. The argument would be a NULL pointer if "log_buf_len", without its value, is set in command line and thus causes the following panic. PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1 [ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70 ... [ 0.000000] Call Trace: [ 0.000000] simple_strtoull+0x29/0x70 [ 0.000000] memparse+0x26/0x90 [ 0.000000] log_buf_len_setup+0x17/0x22 [ 0.000000] do_early_param+0x57/0x8e [ 0.000000] parse_args+0x208/0x320 [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_options+0x29/0x2d [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_param+0x36/0x4d [ 0.000000] setup_arch+0x336/0x99e [ 0.000000] start_kernel+0x6f/0x4ee [ 0.000000] x86_64_start_reservations+0x24/0x26 [ 0.000000] x86_64_start_kernel+0x6f/0x72 [ 0.000000] secondary_startup_64+0xa4/0xb0 This patch adds a check to prevent the panic. Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com Cc: stable@vger.kernel.org Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
He Zhe <zhe.he@windriver.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Steve French authored
commit 926674de upstream. Some servers (e.g. Azure) do not include a spnego blob in the SMB3 negotiate protocol response, so on kerberos mounts ("sec=krb5") we can fail, as we expected the server to list its supported auth types (OIDs in the spnego blob in the negprot response). Change this so that on krb5 mounts we default to trying krb5 if the server doesn't list its supported protocol mechanisms. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Steve French authored
commit 1e77a8c2 upstream. If backupuid mount option is sent, we can incorrectly retry (on access denied on query info) with a cifs (FindFirst) operation on an smb3 mount which causes the server to force the session close. We set backup intent on open so no need for this fallback. See kernel bugzilla 201435 Signed-off-by:
-
Steve French authored
commit 2c887635 upstream. Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats except the session and share reconnect counts. Fix it to reset those as well. CC: Stable <stable@vger.kernel.org> Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Andreas Kemnade authored
commit a0077346 upstream. The bus master was not removed after unloading the module or unbinding the driver. That lead to oopses like this [ 127.842987] Unable to handle kernel paging request at virtual address bf01d04c [ 127.850646] pgd = 70e3cd9a [ 127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000 [ 127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq] [ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12 [ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 127.890441] PC is at 0xbf01d04c [ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc [ 127.898956] pc : [<bf01d04c>] lr : [<c05f9580>] psr: a0070013 [ 127.905609] sp : cf885f48 ip : bf01d04c fp : ddf1e11c [ 127.911132] r10: cf8fe040 r9 : c05f8d00 r8 : cf8fe040 [ 127.916656] r7 : 000000f0 r6 : cf8fe02c r5 : cf8fe000 r4 : cf8fe01c [ 127.923553] r3 : c05f8d00 r2 : 000000f0 r1 : cf8fe000 r0 : dde1ef10 [ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 127.938018] Control: 10c5387d Table: 8f8f0019 DAC: 00000051 [ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f) [ 127.951171] Stack: (0xcf885f48 to 0xcf886000) [ 127.955810] 5f40: cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00 [ 127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000 [ 127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000 [ 127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118) [ 128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148) [ 128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8) [ 128.037017] 5fa0: 00000000 00000000 00000000 00000000 [ 128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 128.061340] Code: bad PC value [ 128.064697] ---[ end trace af066e33c0e14119 ]--- Cc: <stable@vger.kernel.org> Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Signed-off-by:
-
Eugen Hristev authored
commit aea835f2 upstream. When channels are registered, the hardware channel number is not the actual iio channel number. This is because the driver is probed with a certain number of accessible channels. Some pins are routed and some not, depending on the description of the board in the DT. Because of that, channels 0,1,2,3 can correspond to hardware channels 2,3,4,5 for example. In the buffered triggered case, we need to do the translation accordingly. Fixed the channel number to stop reading the wrong channel. Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Eugen Hristev authored
commit bc1b4532 upstream. When doing simple conversions, the driver did not acknowledge the DRDY irq. If this irq status is not acked, it will be left pending, and as soon as a trigger is enabled, the irq handler will be called, it doesn't know why this status has occurred because no channel is pending, and then it will go int a irq loop and board will hang. To avoid this situation, read the LCDR after a raw conversion is done. Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Alexey Khoroshilov authored
commit d3fa21c7 upstream. Leaving for_each_child_of_node loop we should release child device node, if it is not stored for future use. Found by Linux Driver Verification project (linuxtesting.org). JC: I'm not sending this as a quick fix as it's been wrong for years, but good to pick up for stable after the merge window. Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 6df2e98c ("iio: adc: Add imx25-gcq ADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit 8911a43b upstream. The correct way to handle errors returned by regualtor_get() and friends is to propagate the error since that means that an regulator was specified, but something went wrong when requesting it. For handling optional regulators, e.g. when the device has an internal vref, regulator_get_optional() should be used to avoid getting the dummy regulator that the regulator core otherwise provides. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 6a32c246 upstream. Building any configuration with 'make W=1' produces a warning: kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes] When also passing -Werror, this prevents us from building any other files. Nobody ever calls the function, but we can't make it 'static' either since we want the compiler output. Calling it 'main' instead however avoids the warning, because gcc does not insist on having a declaration for main. Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mike Kravetz authored
commit 22146c3c upstream. Some test systems were experiencing negative huge page reserve counts and incorrect file block counts. This was traced to /proc/sys/vm/drop_caches removing clean pages from hugetlbfs file pagecaches. When non-hugetlbfs explicit code removes the pages, the appropriate accounting is not performed. This can be recreated as follows: fallocate -l 2M /dev/hugepages/foo echo 1 > /proc/sys/vm/drop_caches fallocate -l 2M /dev/hugepages/foo grep -i huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 2048 HugePages_Free: 2047 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 4194304 kB ls -lsh /dev/hugepages/foo 4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo To address this issue, dirty pages as they are added to pagecache. This can easily be reproduced with fallocate as shown above. Read faulted pages will eventually end up being marked dirty. But there is a window where they are clean and could be impacted by code such as drop_caches. So, just dirty them all as they are added to the pagecache. Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com Fixes: 6bda666a ("hugepages: fold find_or_alloc_pages into huge_no_page()") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Mihcla Hocko <mhocko@suse.com> Reviewed-by:
Khalid Aziz <khalid.aziz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Biggers authored
commit 1e4c8daf upstream. The 12 character temporary buffer is not necessarily long enough to hold a 'long' value. Increase it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Horia Geantă authored
commit 331351f8 upstream. ghash is a keyed hash algorithm, thus setkey needs to be called. Otherwise the following error occurs: $ modprobe tcrypt mode=318 sec=1 testing speed of async ghash-generic (ghash-generic) tcrypt: test 0 ( 16 byte blocks, 16 bytes per update, 1 updates): tcrypt: hashing failed ret=-126 Cc: <stable@vger.kernel.org> # 4.6+ Fixes: 0660511c ("crypto: tcrypt - Use ahash") Tested-by:
Franck Lenormand <franck.lenormand@nxp.com> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ondrej Mosnacek authored
commit fbe1a850 upstream. When the LRW block counter overflows, the current implementation returns 128 as the index to the precomputed multiplication table, which has 128 entries. This patch fixes it to return the correct value (127). Fixes: 64470f1b ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode") Cc: <stable@vger.kernel.org> # 2.6.20+ Reported-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric W. Biederman authored
commit 0ab93e9c upstream. The genweq_add_file and genwqe_del_file by caching current without using reference counting embed the assumption that a file descriptor will never be passed from one process to another. It even embeds the assumption that the the thread that opened the file will be in existence when the process terminates. Neither of which are guaranteed to be true. Therefore replace caching the task_struct of the opener with pid of the openers thread group id. All the knowledge of the opener is used for is as the target of SIGKILL and a SIGKILL will kill the entire process group. Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary signal argument, update it's ownly caller, and use kill_pid instead of force_sig. The work force_sig does in changing signal handling state is not relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess will be killed just with less work, and less confusion. The work done by force_sig is really only needed for handling syncrhonous exceptions. It will still be possible to cause genwqe_device_remove to wait 8 seconds by passing a file descriptor to another process but the possible user after free is fixed. Fixes: eaf4722d ("GenWQE Character device and DDCB queue") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Frank Haverkamp <haver@linux.vnet.ibm.com> Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com> Cc: Michael Jung <mijung@gmx.net> Cc: Michael Ruettger <michael@ibmra.de> Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com> Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Bin Meng authored
commit d0c9606b upstream. Add Device IDs to the Intel GPU "spurious interrupt" quirk table. For these devices, unplugging the VGA cable and plugging it in again causes spurious interrupts from the IGD. Linux eventually disables the interrupt, but of course that disables any other devices sharing the interrupt. The theory is that this is a VGA BIOS defect: it should have disabled the IGD interrupt but failed to do so. See f67fd55f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") and 7c82126a ("PCI: Add new ID for Intel GPU "spurious interrupt" quirk") for some history. [bhelgaas: See link below for discussion about how to fix this more generically instead of adding device IDs for every new Intel GPU. I hope this is the last patch to add device IDs.] Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.comSigned-off-by:
Bin Meng <bmeng.cn@gmail.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
-
Qiuxu Zhuo authored
commit 8f189738 upstream. The code "lchan = (lchan << 1) | ~lchan" for logical channel intermediate decoding is wrong. The wrong intermediate decoding result is {0xffffffff, 0xfffffffe}. Fix it by replacing '~' with '!'. The correct intermediate decoding result is {0x1, 0x2}. Signed-off-by:
Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> CC: Aristeu Rozanski <aris@redhat.com> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181009172025.18594-1-tony.luck@intel.comSigned-off-by:
-
Tony Luck authored
commit 432de7fd upstream. The count of errors is picked up from bits 52:38 of the machine check bank status register. But this is the count of *corrected* errors. If an uncorrected error is being logged, the h/w sets this field to 0. Which means that when edac_mc_handle_error() is called, the EDAC core will carefully add zero to the appropriate uncorrected error counts. Signed-off-by:
-
Breno Leitao authored
commit f1127439 upstream. uref->usage_index can be indirectly controlled by userspace, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This field is used as an array index by the hiddev_ioctl_usage() function, when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or HIDIOCSUSAGES. For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to field->maxusage and then used as an index to dereference field->usage array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where uref->usage_index is checked against an array maximum value and then it is used as an index in an array. This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the traditional Spectre V1 first load: copy_from_user(uref, user_arg, sizeof(*uref)) if (uref->usage_index >= field->maxusage) goto inval; i = field->usage[uref->usage_index].collection_index; return i; This patch fixes this by sanitizing field uref->usage_index before using it to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load. Cc: <stable@vger.kernel.org> Signed-off-by:
Breno Leitao <leitao@debian.org> v2: Contemplate cmd == HIDIOC{G,S}USAGES case Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Wang Shilong authored
commit 182a79e0 upstream. We return most failure of dquota_initialize() except inode evict, this could make a bit sense, for example we allow file removal even quota files are broken? But it dosen't make sense to allow setting project if quota files etc are broken. Signed-off-by:
Wang Shilong <wshilong@ddn.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Lukas Czerner authored
commit 625ef8a3 upstream. Variable retries is not initialized in ext4_da_write_inline_data_begin() which can lead to nondeterministic number of retries in case we hit ENOSPC. Initialize retries to zero as we do everywhere else. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Al Viro authored
commit 3df629d8 upstream. get in sync with mount_bdev() handling of the same Reported-by: syzbot+c54f8e94e6bba03b04e9@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit ccd3c437 upstream. The code cleaning transaction's lists of checkpoint buffers has a bug where it increases bh refcount only after releasing journal->j_list_lock. Thus the following race is possible: CPU0 CPU1 jbd2_log_do_checkpoint() jbd2_journal_try_to_free_buffers() __journal_try_to_free_buffer(bh) ... while (transaction->t_checkpoint_io_list) ... if (buffer_locked(bh)) { <-- IO completes now, buffer gets unlocked --> spin_unlock(&journal->j_list_lock); spin_lock(&journal->j_list_lock); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); try_to_free_buffers(page); get_bh(bh) <-- accesses freed bh Fix the problem by grabbing bh reference before unlocking journal->j_list_lock. Fixes: dc6e8d66 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()") Fixes: be1158cc ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()") Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com CC: stable@vger.kernel.org Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Takashi Iwai authored
commit 9c80c5a8 upstream. skl_tplg_get_token() misses a break in the big switch() block for SKL_TKN_U8_CORE_ID entry. Spotted nicely by -Wimplicit-fallthrough compiler option. Fixes: 6277e832 ("ASoC: Intel: Skylake: Parse vendor tokens to build module data") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Alexander Duyck authored
commit b6eae0f6 upstream. Unlike asynchronous initialization in the core we have not yet associated the device with the parent, and as such the device doesn't hold a reference to the parent. In order to resolve that we should be holding a reference on the parent until the asynchronous initialization has completed. Cc: <stable@vger.kernel.org> Fixes: 4d88a97a ("libnvdimm: ...base ... infrastructure") Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Stefan Nuernberger authored
commit 076ed3da upstream. commit 40413955 ("Cipso: cipso_v4_optptr enter infinite loop") fixed a possible infinite loop in the IP option parsing of CIPSO. The fix assumes that ip_options_compile filtered out all zero length options and that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist. While this assumption currently holds true, add explicit checks for zero length and invalid length options to be safe for the future. Even though ip_options_compile should have validated the options, the introduction of new one-byte options can still confuse this code without the additional checks. Signed-off-by:
Stefan Nuernberger <snu@amazon.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Simon Veith <sveith@amazon.de> Cc: stable@vger.kernel.org Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luca Coelho authored
commit 3d71c3f1 upstream. The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit e28fd56a upstream. In rmmod path, usbip_vudc does platform_device_put() twice once from platform_device_unregister() and then from put_vudc_device(). The second put results in: BUG kmalloc-2048 (Not tainted): Poison overwritten error or BUG: KASAN: use-after-free in kobject_put+0x1e/0x230 if KASAN is enabled. [ 169.042156] calling init+0x0/0x1000 [usbip_vudc] @ 1697 [ 169.042396] ============================================================================= [ 169.043678] probe of usbip-vudc.0 returned 1 after 350 usecs [ 169.044508] BUG kmalloc-2048 (Not tainted): Poison overwritten [ 169.044509] ----------------------------------------------------------------------------- ... [ 169.057849] INFO: Freed in device_release+0x2b/0x80 age=4223 cpu=3 pid=1693 [ 169.057852] kobject_put+0x86/0x1b0 [ 169.057853] 0xffffffffc0c30a96 [ 169.057855] __x64_sys_delete_module+0x157/0x240 Fix it to call platform_device_del() instead and let put_vudc_device() do the platform_device_put(). Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Lubomir Rintel authored
commit 6528d880 upstream. The USB core gets rightfully upset: usb 1-1: BOGUS urb flags, 240 --> 200 WARNING: CPU: 0 PID: 60 at drivers/usb/core/urb.c:503 usb_submit_urb+0x2f8/0x3ed Modules linked in: CPU: 0 PID: 60 Comm: kworker/0:3 Not tainted 4.19.0-rc6-00319-g5206d00a45c7 #39 Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014 Workqueue: events request_firmware_work_func EIP: usb_submit_urb+0x2f8/0x3ed Code: 75 06 8b 8f 80 00 00 00 8d 47 78 89 4d e4 89 55 e8 e8 35 1c f6 ff 8b 55 e8 56 52 8b 4d e4 51 50 68 e3 ce c7 c0 e8 ed 18 c6 ff <0f> 0b 83 c4 14 80 7d ef 01 74 0a 80 7d ef 03 0f 85 b8 00 00 00 8b EAX: 00000025 EBX: ce7d4980 ECX: 00000000 EDX: 00000001 ESI: 00000200 EDI: ce7d8800 EBP: ce7f5ea8 ESP: ce7f5e70 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 EFLAGS: 00210292 CR0: 80050033 CR2: 00000000 CR3: 00e80000 CR4: 00000090 Call Trace: ? if_usb_fw_timeo+0x64/0x64 __if_usb_submit_rx_urb+0x85/0xe6 ? if_usb_fw_timeo+0x64/0x64 if_usb_submit_rx_urb_fwload+0xd/0xf if_usb_prog_firmware+0xc0/0x3db ? _request_firmware+0x54/0x47b ? _request_firmware+0x89/0x47b ? if_usb_probe+0x412/0x412 lbs_fw_loaded+0x55/0xa6 ? debug_smp_processor_id+0x12/0x14 helper_firmware_cb+0x3c/0x3f request_firmware_work_func+0x37/0x6f process_one_work+0x164/0x25a worker_thread+0x1c4/0x284 kthread+0xec/0xf1 ? cancel_delayed_work_sync+0xf/0xf ? kthread_create_on_node+0x1a/0x1a ret_from_fork+0x2e/0x38 ---[ end trace 3ef1e3b2dd53852f ]--- Cc: stable@vger.kernel.org Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Juergen Gross authored
commit a8565319 upstream. xen_qlock_wait() isn't safe for nested calls due to interrupts. A call of xen_qlock_kick() might be ignored in case a deeper nesting level was active right before the call of xen_poll_irq(): CPU 1: CPU 2: spin_lock(lock1) spin_lock(lock1) -> xen_qlock_wait() -> xen_clear_irq_pending() Interrupt happens spin_unlock(lock1) -> xen_qlock_kick(CPU 2) spin_lock_irqsave(lock2) spin_lock_irqsave(lock2) -> xen_qlock_wait() -> xen_clear_irq_pending() clears kick for lock1 -> xen_poll_irq() spin_unlock_irq_restore(lock2) -> xen_qlock_kick(CPU 2) wakes up spin_unlock_irq_restore(lock2) IRET resumes in xen_qlock_wait() -> xen_poll_irq() never wakes up The solution is to disable interrupts in xen_qlock_wait() and not to poll for the irq in case xen_qlock_wait() is called in nmi context. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Juergen Gross authored
commit 2ac2a7d4 upstream. In the following situation a vcpu waiting for a lock might not be woken up from xen_poll_irq(): CPU 1: CPU 2: CPU 3: takes a spinlock tries to get lock -> xen_qlock_wait() frees the lock -> xen_qlock_kick(cpu2) -> xen_clear_irq_pending() takes lock again tries to get lock -> *lock = _Q_SLOW_VAL -> *lock == _Q_SLOW_VAL ? -> xen_poll_irq() frees the lock -> xen_qlock_kick(cpu3) And cpu 2 will sleep forever. This can be avoided easily by modifying xen_qlock_wait() to call xen_poll_irq() only if the related irq was not pending and to call xen_clear_irq_pending() only if it was pending. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by:
-
Vasilis Liaskovitis authored
commit f92898e7 upstream. If a block device is hot-added when we are out of grants, gnttab_grant_foreign_access fails with -ENOSPC (log message "28 granting access to ring page") in this code path: talk_to_blkback -> setup_blkring -> xenbus_grant_ring -> gnttab_grant_foreign_access and the failing path in talk_to_blkback sets the driver_data to NULL: destroy_blkring: blkif_free(info, 0); mutex_lock(&blkfront_mutex); free_info(info); mutex_unlock(&blkfront_mutex); dev_set_drvdata(&dev->dev, NULL); This results in a NULL pointer BUG when blkfront_remove and blkif_free try to access the failing device's NULL struct blkfront_info. Cc: stable@vger.kernel.org # 4.5 and later Signed-off-by:
Vasilis Liaskovitis <vliaskovitis@suse.com> Reviewed-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
